Contact
Address
QSC Audio Products., LLC.
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468
USA
Main Switchboard
Tel: (800) 854-4079
Tel: (714) 754-6175
Fax: (714) 754-6174
E-Mail: info@qscaudio.com
Application Engineering & Technical Services
Tel. (800) 772-2834
Tel. (714) 957-7150
Fax: (714) 754-6173
E-Mail: tech_support@qscaudio.com
2
www.qscaudio.com • 1-800-854-4079
Contents
Section 1 : The K Family
P.3
Introduction
P.4-5
DMT™ - A Quick Guide
P.6-7
DMT™ - How Far Do They “Throw”
P.8-11 K Family - Subwoofers Selection:
P.12-14
K Family - Rigging
P.15-17
K Family - Power
P.18
Transportation
SECTION 2 : Application Suggestions
P.19Function-room 50-100 people
P.20Live Bar100-200 people
P.21
Flat-floor Hall (Length-ways)
200-400 people
P.22
Flat-floor Ballroom (Width-ways)
P.23
Raked-floor Theatre with Balcony 200-400 people
P.24
800 plus people
Outdoor Stage P.25
Monitor Rigs & Backline
P.26
QSC Application Engineering Contacts
400-800 people
www.qscaudio.com • 1-800-854-4079
3
Section 1: The K Family
Introduction
Providing quality sound reinforcement is your business. Whether your focus is large-scale
productions or simple systems for the neighborhood block party, the fact remains that your
business only makes money when its inventory is being rented. The QSC K Family of products
(with 10 models to choose from) is designed to offer users unparalleled performance in flexible,
easy-to-use configurations. Ideal for a broad range of rental applications, K Family loudspeakers
also feature long-term durability and a clean, professional appearance that is at home in any
situation. With K Family loudspeakers in your rental inventory, the next time a customer asks,
“Have you got something that will…?” your answer will undoubtedly be YES!
K SeriesKLA SeriesKW Series
QSC’s K Family of products offer several unique
features including Tilt-Direct™ pole cup mount on
all our two-way loudspeaker models. With a simple
turn of the dial, the Tilt-Direct engages a downward
tilt (-7.5° on K / KW models and -9° on KLA12)
focusing the acoustic energy on the audience and
off of reflective surfaces. This is ideal for applications where maximum coverage is desired from a
high stand-mounted loudspeaker. KW153 includes
a standard pole cup for convenience.
4
www.qscaudio.com • 1-800-854-4079
-7.5°
Section 1: The K Family
DMT™ For Rental Applications
In the history of professional audio, the birth of Directivity Matched Transition (DMT™) has been one of
those lightbulb events, that makes us all wonder why nobody ever thought of it sooner.
It’s all quite logical – here’s a quick overview;
n Smaller woofers beam less at crossover, and therefore need to be matched with much wider waveguides (90° - 105°). On the other hand larger woofers beam more at crossover, and therefore need to
be matched with much narrower waveguides (60° - 75°).
n Smaller woofers have lower sensitivity, but guess what - the matching wider waveguides disperse
energy over a wider area, therefore on-axis sensitivity is lower by the same order of magnitude. On the
other hand, larger woofers have higher sensitivity, and you guessed it - the matching narrower waveguides also have higher on-axis sensitivity by the same order of magnitude!
8” Woofer
105°
10” Woofer
90°
12” Woofer
75°
n When you only match the width of the waveguide to the woofer but not the height of the waveguide,
then the vertical off-axis response will still be gnarly, and affect your overall power response at the listening position (power response = sum of anechoic frequency response PLUS echoic early reflections).
However when you match BOTH the width & height of your waveguide to the woofer, then you will have
far smoother off-axis response, and therefore optimized power response.
And here’s the real kicker; for short-throw applications (front-fill, delay-fill, console monitors, vocal monitors, etc) you actually want to be using a small woofer model to keep the footprint down, AND you want
to be using a wider coverage waveguide, BUT you don’t necessarily want to sacrifice power or headroom. This is why DMT™ has captured so much attention!
www.qscaudio.com • 1-800-854-4079
5
DMT™ Quick Guide
The following chart provides a quick-guide to selecting the right K-family loudspeaker for the right application,
based on the DMT™ concept:
DMT™ – Application:
Small venue, corporate function, lounge-bar,
distributed front-fill / delay-fill / balcony fill,
dj monitor, console monitor
All purpose PA, mid-size venue, mid-throw,
vocal wedge or keyboard wedge, backline
acoustic amp
All purpose PA, mid-size venue, longer-throw,
drum or keyboard wedge, backline acoustic amp
High SPL, large venue, long-throw, highly
array-able & modular building block,
centre-cluster, drum-fill or side-fill
110° 90° 75° K8 60° K10 K12
KW122
2x KW152 KW152 Bandpass sub, maximum bang-for-buck, ideal
for playback music (ie dj or small bar), minimal
footprint, stackable, highly transportable
FACT
SUB
High SPL, large venue, long-throw, horn-loaded
midrange for increased vocal clarity, or side-fill on
large stage
Direct radiating sub, flattest response,
highly modular building block, ideal for live
reinforcement
6
120° KW153 K-SUB
KW181
Interesting Fact: EVERY K family full-range loudspeaker, from the smallest model to
the largest, features Intrinsic Correction™ EQ, which employs FIR linear phase filters,
more commonly found on high-end DSP processors.
www.qscaudio.com • 1-800-854-4079
DMT™ Quick Guide
DMT™ - Throw This
The term “throw” is perhaps the biggest misnomer in the
professional audio industry, and is commonly used to
describe the relative distance at which a loudspeaker can
produce an intelligible signal at a volume level sufficient for
the application.
The reality is that sound does not throw, but rather sound
“propagates” through the air, and will simply attenuate by 6
decibels with every doubling of distance (inverse square
law). Other factors such as air absorption can additionally &
progressively attenuate the higher frequencies, however the
distance over which the sound propagates and still remains
intelligible basically depends on the ratio of signal-to-noise
at the listener’s location.
Because the audio industry has widely adopted the term “throw” we will
continue to employ this terminology for the purposes of this guide:
Short-throw loudspeakers have very wide dispersion, and are typically operated at low
to medium SPL levels simply due to the closer proximity to the audience, therefore woofer
cone sizes tend to be smaller. These speakers typically have very flat frequency response
over a wide bandwidth, and wide horizontal dispersion is necessary in order to cover the
audience seated within a close arc of the loudspeaker. Air absorption is seldom a problem
here as the distances are so short. Examples of QSC short-throw speakers include the K8 & K10
loudspeakers.
Medium-throw loudspeakers exhibit moderate narrowing in horizontal and vertical dispersion. Due to
the slightly greater distance needing to be covered, a higher Maximum SPL is required, and this is typically achieved by increasing the woofer cone size to 12” or 15”, thereby increasing the loudspeakers
sensitivity. Examples of QSC medium-throw speakers include the K12 and KW122 loudspeakers.
Long-throw loudspeakers have a very narrow dispersion (60degrees or less) – the narrower horn
pattern increases on-axis sensitivity and this in turn is matched by the higher sensitivity of a larger
woofer cone – the net result is more acoustic output within the coverage pattern. When used on their
own, these are great for covering large distances, however one of the major benefits of these narrow
dispersion loudspeakers is that they array extremely well - with minimal overlap & comb-filtering. This
makes them the perfect modular “building block” for creating arrays of varying sizes. Examples of QSC
long-throw speakers include the KW152, KW153 and KLA12 loudspeakers.
www.qscaudio.com • 1-800-854-4079
7
DMT™ Guide
TIP
Figure 3: When arraying two KW152 60° boxes, avoid hard packing the 18° sidewalls as
this will yield only a 36° splay, and create overlapping energy which will result in severe
comb-filtering through the listening area. Instead, use a wider splay of 60° between
boxes to minimize overlapping energy and increase the total coverage area to 120°.
Figure1. Vertical
Array of 4x KLA12s
The chart below illustrates the nominal Sound Pressure Level (C-weighted)
at four arbitrary distances (4m, 8m, 16m, 32m) which have been calculated from the 1m Long-term or Continuous Maximum SPL for each K-family
loudspeaker or array. Please note this does not factor in any losses which
may result from air absorption of the upper high frequencies.
Figure2. Horizontal
Array of 2x KW152s
Model:
DMT
1m (3ft)
4m (13ft)
8m (26m)
16m (53ft)
32m (105ft)
K8
110°
121 dB
109 dB
103 dB
97 dB
91 dB
K10
90°
123 dB
111 dB
105 dB
99 dB
93 dB
K12
75°
125 dB
113 dB
107 dB
101 dB
95 dB
KW122
75°
125 dB
113 dB
107 dB
101 dB
95 dB
KW153
75°
128 dB
116 dB
110 dB
104 dB
98 dB
KW152 x1
127 dB
115 dB
109 dB
103 dB
97 dB
KW152 x2
130 dB
118 dB
112 dB
106 dB
100 dB
KW152 x4
133 dB
121 dB
115 dB
109 dB
103 dB
KLA12 x1
125 dB
113 dB
107 dB
101 dB
95 dB
KLA12 x2
128 dB
116 dB
110 dB
104 dB
98 dB
131 dB
119 dB
113 dB
107 dB
101 dB
60°
90x15°
KLA12 x4
8
www.qscaudio.com • 1-800-854-4079
K Family: Subwoofers
Choosing the Appropriate Sub
There are three options for Sub-woofers when utilizing full-range enclosures from QSC’s K-Family catalog;
1. The first option is the K Sub. The K Sub is a double 12” band-pass sub enclosure. It is only 14”
(355.6mm) wide by 26” (660.4mm) tall, so it fits into some very tight spaces – especially when laid on its
side and slid under a riser platform stage.
2. The second option is the KW181 sub-woofer. The KW181 is a single 18” front-loaded / dual ported sub
enclosure. Its larger enclosure and bigger woofer gives a deeper bass response than the K Sub (39Hz vs.
44Hz). The size & weight of the enclosure also makes for a more stable base when pole mounting the
larger and heavier KW full-range models on top of it.
3. The third option for sub-woofer enhancement is the KLA181. The KLA181 is also a single 18” front-loaded enclosure but with four ports/vents and a slightly larger enclosure. It contains integral rigging hardware
that specifically allows it to hang within (on top of) a KLA12 line array. The larger box volume and quad port
design gives an additional bass extension over the KW181 (33Hz vs. 39Hz).
All three sub models share these same attributes:
n A class “D” 1,000 watt internal power module with DSP
n Internal 100Hz cross-over (Low Pass Filter)
n A threaded M20 pole mount receptacle for “sub/sat” deployments
n All three sub models ship with the threaded pole!
KW181
K Sub
KLA181
www.qscaudio.com • 1-800-854-4079
9
K Family: Subwoofers
Pole Extension Accessory
As mentioned previously, all three K-family subwoofer model ships with the threaded pole. The length of
this pole has been optimized for safe use with 12” models or larger (see figure 1) however when smaller
models are used (K8 or K10), the included pole often does not provide sufficient elevation. For these cases
an optional 16” Pole Extension accessory is available (Model: “K SERIES POLE EXTENSION” - see Figure 2).
Warning - only use the Pole Extension with the smaller K8 and K10 models.
Figure 1: (K12 or larger)
Figure 2: K8 and K10
So, How Many Subs Will I Need?
To anyone in the industry this is like asking “how big is a fish.”
The number of subs required for any given system deployment depends on many of the same
considerations made when choosing which DMT top box to use. For example:
n Content – Live Sound Reinforcement or Play-back (recorded) music?
n Space constraints – limited room for deployment?
n Desired bass extension and SPL (Sound Pressure Level)?
n Budget constraints?
Other considerations include (but are not limited to):
n Will the subs be flown, ground-stacked or combination?
n Type of content – rock; jazz; rap; reggae, etc?
n Stereo Left-Right deployment or mono block in center?
n Indoor or outdoor?
10
www.qscaudio.com • 1-800-854-4079
K Family: Subwoofers
Until these questions are answered,
a proper “top to sub” ratio cannot be
accurately predicted by a “one size
fits all” formula. There are, however
some basic rule-of-thumb combinations to keep in mind when planning
a system that requires full-range
performance down into the low
40Hz region and below:
As you can see in the application suggestions above, a safe topto-sub ratio with K-family products is typically 1:1. For outdoor
applications where no wall or ceiling boundaries exist, it is recommended to double the subwoofer quantity and use a 1:2 ratio.
www.qscaudio.com • 1-800-854-4079
11
K Family: Subwoofers
Ground-Stacked vs. Flown Subwoofers
With KLA series you have the choice of using ground-stacked subwoofers (KW181/
KLA18) or flown Subwoofers (KLA18 only). Both subwoofer models have similar
performance however the KLA model offers the extra ability to be flown as part of an
array as well as ground-stacked. Here are some reasons why you might choose one
configuration over the other for certain applications;
Ground-Stacked Subwoofers: (KW181 or KLA18). This is the simplest configuration to
set up and deploy. The obvious benefit of any ground-stacked system is the groundplane coupling which occurs, providing an additional 3dB of “free” bass. Setup and
load-out times are also greatly reduced. Wiring is also simplified – audio loop thru
from the subs to tops can be employed and easily adjusted to suit.
The only real downside to ground-stacked subwoofers is that the SPL in the front of
the audience will be much greater than the SPL in the rear of the audience, but soundengineers have been living with this compromise for decades.
Flown Subwoofers: (KLA18 only). This is obviously a more complex configuration to
set up and deploy, however the known benefits can certainly make for a rewarding experience, both to you and your client. A flown subwoofer array offers the major benefit
of uniform SPL across the audience area (front to back). In addition, flown subwoofers
frequently just seem to “hook up” better with the rest of the system.
The first disadvantage to flown subwoofers is the obvious deployment time and
effort required. However the results can certainly make the effort worthwhile. The
second disadvantage to flown subwoofers is the loss of substantial surface (floor or
wall) to plane couple, although in some instances the ceiling will serve as a boundary.
NOTE
12
In some applications (ie balcony auditoriums or theatres) it is common to employ
BOTH flown & stacked configurations , however careful DSP alignment is required.
www.qscaudio.com • 1-800-854-4079
K Family: Rigging
K Family - Rigging & Suspension
The “K”, “KW” and “KLA” series all offer several methods for either permanently
suspending or hanging in an installation, or for temporarily rigging or “flying” in portable
applications.
K series - There are two methods for suspending each full-range model
(K8, K10 & K12).
Integrated threaded M10 points on the top, back and side facilitate both vertical
(HF on top) and horizontal suspension. Use only rated, forged-shoulder eyebolts.
For your convenience, these are available from QSC Audio in a pack of three eyebolts
– P/N “K Series M10 Kit”.
The Yokes can be bolted directly to a wall or ceiling in permanent installations. For fast temporary suspension
from a truss or rigging pipe, add a lighting claw or truss clamp to the yoke for portable deployment.
Yoke Bracket
TIP
Truss Clamp
Truss clamps can be obtained from various rigging supply
companies such as ATM Flyware.
http://adapttechgroup.com/index.html
www.qscaudio.com • 1-800-854-4079
13
KW Series Guide
The KW122 has the following installation M10 suspension points:
Two on the top
Two on each side
One on the rear
The KW122 can be hung vertically via the top pick points with the rear pick point available for proper coverage
angling. It can be hung horizontally using the KW122 Suspension Kit which includes two M10 forged eyebolts and
a pull-back bar. M10 bolts may be installed to the pick points on either side so the enclosure can be flown with the
horn to the inside or outside.
The KW152 and KW153 have the following installation M10 suspension points:
Two on top
Two on bottom
Three on rear (one being a center pick point)
KW152 Flown Horn Up
KW153 Flown Horn Down
Again, as with the K Series, adding truss clamps to the package gives a quick, easy and safe
method for hanging KW speakers from a truss or fixed rigging pipe.
14
www.qscaudio.com • 1-800-854-4079
KW Series Guide
KLA Series
The KLA series line array modules offer one of the industry’s fastest and simplest systems to rig together and suspend. KLA’s unique self-contained SOLO™ (Single-Operator
Logistics) Rigging System enables users to quickly assemble (and disassemble) the line
array in a fraction of the time without the need for special tools or external hardware.
For suspending the array, KLA offers two solutions. For
permanent installations each element has four threaded
M10 points on the top of the cabinet, and one in the bottom center of the rear of the cabinet for aiming.
For portable or touring applications, the “KLA AF12” array
frame provides speed and flexibility to the rigging process.
The array frame can either mount to the top of a KLA12
full-range cabinet, or to the top of a KLA181 sub-woofer
when hanging subs on top of the array. The array frame
can be mounted with its pick bar facing forward or backward to give the maximum flexibility in vertical focus and
use of center of gravity.
3 x Box KLA12 under
2 x KLA181
5 x Box KLA12
Array
Warning
SUSPENSION AND MOUNTING OF LOUDSPEAKERS REPRESENTS A POTENTIAL SAFETY HAZARD. QSC HAS NO
KNOWLEDGE ABOUT THE ACTUAL STRUCTURAL INTEGRITY OF THE FACILITY IN WHICH THESE PRODUCTS ARE TO BE
USED. THE SYSTEM USER AND/OR INSTALLER HAS SOLE RESPONSIBILITY FOR PROPERLY INSTALLING THE EQUIPMENT AND COMPLYING WITH ALL APPLICABLE STANDARDS AND REGULATORY REQUIREMENTS. ANY RIGGING OR
SUSPENSION OF EQUIPMENT SHOULD ONLY BE PERFORMED BY CERTIFIED AND LICENSED RIGGING TECHNICIANS.
www.qscaudio.com • 1-800-854-4079
15
K Family: Power Efficiency
Efficiency
All models of loudspeakers in the “House of K” lineup share the same 1,000 watt class D
power amp module.
K Series
KW Series
KLA Series
This power amp design is very efficient when it comes to AC draw or consumption. For example, one
powered loudspeaker (any H.O.K. model) when operating at 1/8 power (which is fairly loud with an occasional clip light flashing), only draws 2.1 amps at 120 VAC. That means you can run up to five loudspeakers (any combination, including sub-woofers) off a single 15 amp AC circuit, and up to eight off a
20 amp circuit! That means you can actually power a full 4-way sound system of up to two full-range
top enclosures plus two sub-woofers (KW153 / KW181) per side, off of one single dedicated 20 amp
wall outlet. No need for a special (and expensive) AC power distribution to run the PA.
Voltage
One Speaker Two Speakers
Four Speakers
Six Speakers
100 VAC
2.3 A*
4.6 A*
9.2 A*
13.8 A*
120 VAC
2.01 A*
4.02 A*
8.04 A*
12.06 A*
230 VAC
1.13 A*
2.26 A*
4.52 A*
6.78 A*
* At 1/8 Power
Green Power
Not only are the K power modules efficient during use, but also when not in use. When the power
module’s DSP sits idle (no signal) for over five minutes, it automatically enters standby mode – effectively shutting down the amplifier. This not only saves energy, but also saves cost in installations where
remote controlled AC relays (On & Off) are required. Once signal is restored, the DSP senses it immediately and turns the amplifier back on without any noticeable delay.
16
www.qscaudio.com • 1-800-854-4079
K Family: Wiring
Wiring
The K & KW series speakers come with a 10 foot (3 meter) detachable locking IEC power cable. The
KLA series however utilizes both an input and output Neutrik powerCON AC connection on each cabinet. Each KLA12 cabinet comes with a 12 foot (3.6 meter) main power cable; a 2 foot (1/2 meter) AC
jumper; and a 2 foot XLR to XLR line jumper. The KLA181 subwoofer comes with a 12 foot (3.6 meter)
main power cable; a 3 foot (1 meter) AC jumper; and a 3 foot XLR to XLR jumper.
Custom combination cables can be obtained from a number of 3rd party suppliers such as ProCo (preassembled Siamese cable), or Proel (bulk HPC501 cable);
http://www.procosound.com/snakeworks/siamese-twins
http://www.proel.com/proel/products/stage_equipment.html?cid=11169460615770/
These custom length cables combine “no hum” AC power (IEC or powerCON) with a separate XLR to
XLR audio channel into one jacketed cable. Please note – the cable shielding does very little to cancel
the hum, but rather the tight twists in the pair of conductors combined with the high performance CMR
(Common Mode Rejection) circuit inside each K product’s input is the reason why these combination
cables work so well.
In addition to the AC power and audio connections, each power module also comes with a three pin
Euro-block (Phoenix) style connector for providing Remote Level Control. By simply connecting a 10K
potentiometer and daisy-chaining all the speakers together, a very inexpensive master level control can
be added to any distributed rental system – great for corporate marquees and pavilions on raceday!
www.qscaudio.com • 1-800-854-4079
17
K Family: Transportation
K Family – Totes & Covers
K-Series – for each K Series fullrange model (K8, K10 & K12) there is an optional soft, padded tote
available, made with weather resistant & heavy-duty Nylon/Cordura® material. Side-flap access to the
aluminum top handle allows for a convenient vertical carry.
For the K-SUB we offer a soft, padded slip-on cover made from the same material. The included strap
facilitates secure transport of K Series 2-way speakers for a 1-trip load-in.
K8 Tote
K10 Tote
K12 Tote
KSUB Cover
NEW – we now offer an optional Nylon fabric and mesh cover for temporary
outdoor use of the K8, K10 or K12 in adverse weather. A removable amplifier
panel allows access to connectors and controls, and a vented panel maintains
airflow for proper heat management. NOTE: This is not intended for permanent
outdoor installation or sustained severe weather conditions.
Pictured: “K10 Outdoor Cover”
KW-Series – for each KW Series fullrange model (KW122, KW152 & KW153) there is also an optional soft, padded cover
available (no straps), made with weather resistant & heavy-duty Nylon/Cordura® material. A similar side-flap access to the
aluminum top handle allows for a convenient vertical carry.
For the KW-181 we also offer a soft, padded slip-on cover made from the same material.
KW122 Cover Tote
18
KW152 Cover
www.qscaudio.com • 1-800-854-4079
KW153 Cover
KW181 Cover
Applications: Corporate AV Function Room
Corporate AV: Function Room
Approx. 30x50ft (1500sqft) : 50-100 people
This is a typical hotel or conference center “function room” often
with moveable “airwalls” or “concertina doors”. Most commonly
used for smaller corporate presentations, seminars or training
events during the day, but can also be used for small scale
ceremonies or events during the evening, requiring some level of
music reinforcement.
Option 1 – Basic Speech & music playback
reinforcement system
Option 2 – Add a KSUB for greater impact of music playback
n Recommend K8 with 105 degree DMT coverage
TIP
For portability – one
KSUB, a pair of K8’s, plus
all cabling conveniently
packed into “Tote Bags” and wheeled away!
TIP
Rotate KSUB for even lower footprint –
or to fit under riser
www.qscaudio.com • 1-800-854-4079
19
Applications: Live Bar
Live Sound Reinforcement:
Live Bar
Approx. 40x60ft (2400sqft) : 100-200 people
This would be a live music bar or club, with the stage oriented
against a back wall or corner.
Music levels would gradually increase during the course of the
evening as the venue
switches from “dining” mode to nightlife “entertainment” mode.
Option 1 – Light Acoustic instrument reinforcement system Recommend K10 with short-throw 90 degree DMT coverage
TIP
For backline applications, the
K10 works extremely well for
acoustic guitar and keyboards,
furthermore the Line Out also
doubles as a DI output to feed
any FOH mixer!
Option 2 – High Impact Music reinforcement system – recommend KW122 for more punch
TIP
20
www.qscaudio.com • 1-800-854-4079
Simply add more KW122s
for wider coverage, and more
KW181s for greater bass energy.
Applications: Hall
Live Sound Reinforcement: Hall
Approx. 50x70ft (3500sqft) : 200-400 people
This is your typical multi-purpose venue; the School Assembly
Hall, the Community Hall, the Gymnatorium, or the Church Hall,
usually with a hard flat floor and temporary stackable seating or
retractable stadium seating.
The permanent stage is mostly directed lengthways
down the Hall, requiring narrower coverage and
longer-throw loudspeakers.
Option 1 – Basic Speech & “playback” music reinforcement system Recommend K12
with 75 degree DMT coverage
NOTE
For quick and easy public address deployment,
simply connect the announcement microphone
directly into a K family fullrange loudspeaker,
and loop thru to the next.
Option 2 – High Impact “Live” music reinforcement system
Recommend KW153 for higher SPL
while retaining 75 degree
DMT coverage
www.qscaudio.com • 1-800-854-4079
21
Applications: Ballroom
Corporate AV: Ballroom
Approx. 50x70ft (3500sqft): 200-400 People
This is a typical Hotel or Conference Centre “Ballroom” with moveable “airwalls” or “concertina doors”.
Mostly used for larger corporate presentations, Seminars & training events
during the day, but can also be used for major ceremonies or events during
the evening which may require a DJ or band. Temporary stage is typically
directed widthways across the room, requiring wider coverage loudspeakers.
Option 1 – “Ground-stacked” Speech & “Payback” Music Reinforcement System
TIP
When arraying two KW152
boxes, you will need to
apply a High Shelf filter to
compensate for the LF &
MF band summing that occurs. We suggest using a
Hi-shelf with a 3dB boost at
1.5kHz and a 12dB-slope.
Note: this feature is already
built into each KLA (Ar-Q).
Option 2 – “Flown” High Impact Live Music Reinforcement System
TIP
For distributed systems in
ballrooms, we typically recommend airwall track adaptors
such as Alumalok and Titan;
www.alumalok.com
www.airwallhangers.com
22
www.qscaudio.com • 1-800-854-4079
Applications: Theater
Live Sound Reinforcement: Theatre
Approx. 80x100ft (8000sqft) : 400-800 people
This can be a modern community theatre with stadium seating, or a traditional proscenium arch theatre with slow raking lower stalls, and a steep raking dress-circle or
balcony. Seats are typically upholstered and permanent fixtures.
Ideal deployment would include a flown Line Array with enough vertical coverage to
covers all levels. Unfortunately some older heritage buildings have no structural ability
for chain-motor pick points, therefore loudspeakers must be ground-stacked.
Option 1 – “Ground-stacked” Speech &
“Payback” Music Reinforcement System
TIP
By adjusting the lower KLA’s Tilt-Direct
from -9° to 0°, you can “steer” the
KLA boxes up towards a balcony.
Option 2 – “Flown” High
Impact Live Music reinforcement system
TIP
Use EASE Focus to determine vertical coverage of each KLA array.
Ease Focus is a free download, available from:
http://www.qscaudio.com/products/products.htm#Downloads
www.qscaudio.com • 1-800-854-4079
23
Applications: Outdoor Stage
Live Sound Reinforcement:
Outdoor Stage
Approx. up to 100ft (12,000sqft): 800 plus people
This is a small outdoor stage – either an existing band shell, or a temporary
scaffold or trailer stage. Most commonly used for community events such
as fairs, race-days or music festivals.
Option 1 – “Ground-stacked” Speech & “Playback” Music Reinforcement System
TIP
The KLA also makes a great stage-lip “front-fill”
loudspeaker for wider stage applications. QSC
Engineers have even gone to the effort of including
a useful “foot” on each KLA for this application.
Option 2 – “Flown” High Impact Live Music Reinforcement System
TIP
When adding out-fill
loudspeakers, you
can invert the L/R
to R/L to maintain
stereo imaging
across a wider
area.
24
www.qscaudio.com • 1-800-854-4079
Live Sound Reinforcement: Monitor Rigs & Backline
Monitor Rigs & Backline
Small Monitor Rig
TIP
Remember, you can power up to
FIVE K-family products (any mix of
model)
fromMonitor
a single 15Amp
Large
Rig circuit
(115V) or 7.5Amp circuit (230V)
Large Monitor Rig
www.qscaudio.com • 1-800-854-4079
25
Contact
Address
QSC Audio Products., LLC.
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468
USA
Main Switchboard
Tel: (800) 854-4079
Tel: (714) 754-6175
Fax: (714) 754-6174
E-Mail: info@qscaudio.com
Application Engineering & Technical Services
Tel. (800) 772-2834
Tel. (714) 957-7150
Fax: (714) 754-6173
E-Mail: tech_support@qscaudio.com
26
www.qscaudio.com • 1-800-854-4079