LOPA - HB
Surface / High Bay
PROJECT:
DATE:
CAT. NO.:
TYPE:
NOTES
VOLTS:
GENERAL
Shallow profile, high performance, low brightness luminaire offering energy
savings over traditional metal halide fixtures. The high efficiency and relatively
uniform light distribution reduce glare and eliminate shadows and hot spots.
Fluorescent lamps start instantly and eliminate the warm-up period required for
HID lamps. Longer lamp life reduces the frequency of lamp replacement.
Optional wire guard available.
CONSTRUCTION
Rigid one piece body constructed from code gauge steel.
FINISH
Standard finish is high gloss white polyester powder coat paint. Baked white
enamel.
SHIELDING
High Bay reflectors with HT or MR finish as an optional upgrade. While the wide
spread light distribution allows for visual comfort without any shielding, option
available for 15” module is a clear acrylic prismatic wrap-around diffuser with
ribbed sides, which is easily removable without any hardware.
ELECTRICAL
Instant start electronic ballast, 120V-50/60Hz. Other ballasts and voltages
available upon request.
CERTIFICATIONS
CSA and/or UL approved.
Ordering Information
LOPA-HB Series
MODULE
WIDTH
4
MODULE
LENGTH
-
lamps
watts
SHIELDING
REFLECTOR
VOLTAGE
BALLAST /
DRIVER
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
IS = IS
PRS = PRS
RS = RS
3=3
15 = 15”
24 = 24”
4=4
4 = 4’
5=5
6=6
32 = 32 (T8)
54 = 54 (T5HO)
ACW = Acrylic
wrap-around
lens
WG = Wireguard
HT = Specular
MR = Maximum
Reveal 97%
8=8
LOPA-HB 2015-05-06 V:001