KPHFM SERIES
P R O D U C T S
CONVERSIONS
S U P E R I O R
The exceptionally low profile of the KPHFM Series Conversion
Kits enable them to be fitted inside the latest generation of
slimline luminaires using High Frequency control gear.
T E C H N I C A L L Y
Purpose designed to provide emergency lighting conversions
of all mains lighting luminaires, the Convertalux KPHFM series
has been designed specifically to operate in conjunction with
high frequency ballasts to avoid the ballast lock out problems
often encountered when converting this type of mains
lighting equipment.
KPHFM Series Conversion Inverter Models
The low profile inverter modules incorporate a constant current battery
charger suitable to recharge and maintain the state of charge of the
connected nickel cadmium battery.
The high frequency inverter is fully solid state and provides an a.c. supply
suitable to operate the lamp(s) from the battery supply.
Designed and manufactured in accordance with the requirements of
EN60924/925 the KPHFM inverter modules have been designed and
tested for compliance to all current and known future requirements
of E.U. Directives.
KPHFM Series Batteries
Sealed rechargeable Nickel Cadmium Batteries suitable for Emergency
Lighting applications.
3 YEAR
WARRANTY
The company pays close
attention to the quality,
specification and
construction of its
products and is able to
offer a comprehensive
system design capability
to allow the effectiveness
of each installation to be
maximised.
W ith Ventilux
installations operating
worldwide, the company
works in close association
with distributors and a
number of specialist
emergency lighting
conversion centres
throughout its market.
UNIT 2
A SHGROV E INDUSTRIA L ESTA TE
K ILL A V ENUE
DUN LA OGHA IRE
COUNTY DUBLIN
IRELA ND
TELEPHONE
(INT) + 353 (0)1 214 8800
FA CSIM ILE
(INT) + 353 (0)1 280 5729
E-M A IL
user@ventilux.ie
UNIT 20
BRITONW OOD TRA DING ESTA TE
FA RA DA Y ROA D
K NOW SLEY
LIV ERPOOL
L33 7UT
UNITED K INGDOM
SERIES
··
··
·
··
··
DESIGN FEA TURES/BENEFITS
Slimline module suitable for fitting into low profile
mains luminaires.
Compatible with all high frequency mains ballast.
Avoids ballast lockout.
Suitable for lamps ranging from 9W to 85W,
(excluding TS).
Can be used for Non-Maintained or Maintained
luminaire operation.
High efficiency inverter for excellent emergency ballast
lumen factors.
·
·
··
Assembly complete with charge indicating LED.
Remote Pack option available.
Easy to install and maintain.
Robust construction, designed to EN 60924/925 and
all relevant EU directives.
Ventilux full 3 year product warranty as standard.
SA M PLE SPECIFICA TION
Emergency Conversion K its for mains
luminaires with 9W to 85W fluorescent lamps
with/without remote mounting.
Inverter module to be suitable for the
conversion of mains lighting luminaires
incorporating high frequency control gear
without additional switching components.
Inverter M odule enclosed in white finish
steel can.
High temperature sealed nickel cadmium
battery.
20mm conduit entry positions in end/rear
surfaces of remote mounting box.
M ax. dimensions of inverter module to be
29H x 38W x 215L (mm).
M ax. dimensions of remote mounting box
to be 145W x 55D x 395L (mm).
3 year product warranty.
A s V entilux Convertalux (K PHFM )
K IT PA CK S
Order Code
KPHFM-3-18
KPHFM-4-58
KPHFM-5-70
Emergency Duration
3 Hours
3 Hours
3 Hour
Range of Lamps
9W to 18W
18W to 58W
36W to 85W
HFM-4-58
HFM-5-70
230V (127V)*+/-10%
50/60 Hz
230V (127V)* +/-10%
50/60 Hz
Note: Replace KP with RP for remote pack option
CONV ERSION INV ERTER M ODULES
Order code
HFM-3-18
Input voltage
230V (127V)* +/-10%
50/60 Hz
Battery Charger
Constant current. Nominal Charge current 250 mA
Changeover
Solid State meeting electrical requirements of BS764; Including switched supply to mains ballast
Inverter
Solid state, High Frequency (30 -50 KHz)
Monitor
High Intensity
LED
Recharge Period
24 Hour for full recharge
Module Dimensions
29mm H x 38mm W x 215mm L
High Intensity
LED
High Intensity
LED
Module Fixing Centres
205mm x 4mm Dia
Max. Module Case Temp.
65° C at geometric centre
BA TTERY PA CK S
Order code
NIS/3.6
NIS/4.8
NIS/6.0
No. of Cells
3 x 4 Ah
4 x 4 Ah
5 x 4 Ah
Battery Pack
Dimensions (mm)
210 x dia. 37
270 x dia. 37
330 x dia. 37
Battery Pack
Fixing Centres (mm)
200
260
320
Photometric Data - Typical BLFs
18W
KPHFM-3-18
KPHFM-4-58
26W
28W
36W
58W
0.20
0.15
0.09
0.08
65W
70W
0.10
0.07
0.10
KPHFM-5-70
215
38
29
V ENTILUX
manufactures and
supplies an extensive
range of emergency
lighting, standby power
and fire detection
equipment.
··
··
·
K PHFM
TELEPHONE
(INT) + 44 (0) 151 546 4155
FA CSIM ILE
(INT) + 44 (0) 151 546 3987
E-M A IL
barrie@ventilux.co.uk
T E C H N I C A L L Y
S U P E R I O R
P R O D U C T S
SPA RES ORDER CODE
NIS/3.6
NIS/4.8
NIS/6.0
00410
DESCRIPTION
3 Cell NiCad. Battery
4 Cell NiCad. Battery
5 Cell NiCad. Battery
LED A ssembly and Clip
This publication is provided to outline specification details of Ventilux product and is not deemed to form any part of any offer or contract.
We adopt a policy of continuous product and service improvement and we reserve the right to vary details without prior notice.
* Conversion Inverter Modules also available in 127 Volts
V 97 ¥ 10 - 1