Re-Formable Semirigid Cable Assemblies, Between:
Connectors : 1.85, 2.4, 2.92 mm and SMPM
DESCRIPTION The Re-Formable Semirigid Cable Assemblies, Between, up to 65
GHz, easy to install with bending on your Labs./Sites, are designed
for broadband measurement, instrument and system use. All materials are "lead free".
SPECIFICATIONS:
Connector Interfaces:
Insertion Loss :
See Fig.1
Return Loss :
See following table
Phase match :
Available (+/- 2 ps or +/- 1 ps)
Temperature Range : -55 to 100 deg.C
Connector durability : >100 cycles [Predicted for SMPM]
Length (L)
: 25 to 800 mm +/-2mm [*]
(Over 801mm to 1500mm, Considerable)
Bending
: On request
- 1.85 mm, 2.4 mm, and 2.92 mm
are conformed IEEE-std-287.
- SMPM as per MIL-STD-348A 328.1
Production Status
Two weeks Lead-Time will
be available for shipping.
[*] Please specify length(L: nnnn see following table), when you order this item.
For example: CA185F119SMPM0025 (Length:25 mm)
Frequency
Range
TYPE
Connectors
Typical performance, including Coaxial adapters for SMPM
Return Loss
CA185F119SMPMnnnn
1.85 mm Female
and
7.1 SMPM Female
14.6
DC 65GHz
L
CA185M119SMPMnnnn
1.85 mm Male
and
7.1 SMPM Female
13.4
>22 dB, <13 GHz
>16 dB, 13 to 48 GHz
>12 dB, 48 to 65 GHz
6x CA185F119SMPM0050 (Blue)
6x CA185M119SMPM0050 (Orange)
L
CA240F119SMPMnnnn
DC 50GHz
2.40 mm Female
and
7.1 SMPM Female
15.4
L
CA240M119SMPMnnnn
2.40 mm Male
and
7.1 SMPM Female
14.3
>22 dB, <13 GHz
>16 dB, 13 to 38 GHz
>13 dB, 38 to 50 GHz
6x CA240F119SMPM0050 (Blue)
6x CA240M119SMPM0050 (Orange)
L
CA292F119SMPMnnnn
DC 40GHz
2.92 mm Female
and
7.1 SMPM Female
14.7
L
CA292M119SMPMnnnn 2.92 mm Male
7.1
13.9
and
SMPM Female
6x CA292F119SMPM0050 (Blue)
6x CA292M119SMPM0050 (Orange)
L
All dimensions are in Millimeters.
Cable Properties:
Outer Conductor:
1.19 mm Dia.Copper
with Cu/Sn/Zn plated
Center Conductor:
Silver plated copper
Insulator : PTFE
Moding Freq.:111GHz(Approx.)
Delay Time: 0.476ns/100mm
Inside Bending Radius: 3 mm(min)
Non-Magnetic
0
Insertion Loss dB/100mm (Typ)
Note:
>22 dB, <13 GHz
>16 dB, 13 to 35 GHz
>13 dB, 35 to 40 GHz
--Caution---
0.2
When you install the cable
assemblies, please support
a cable near the connector
and tighten the nut, because
the cable that composed of
a thin copper tube may be
damaged easily by a twist
stress.
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
[GHz]
Fig.2 Tightening of Nut
0 5 10 15 20 25 30 35 40 45 50 55 60 65
Fig.1 Frequency vs Insertion Loss
Removal Tool for SMPM
Hand Bender 1200
For Re-Forming(R3/6mm)
4mm(Approx.)
Notice:
About the cable bending with hand bender 1200
To prevent the cable damage in the joint part of the
cable and the connector, Please bend the cable in a
place about 4mm away from the joint part.
Specifications Subject to Change Without Notice.
Copyright(C) 2012 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
ISO9001:2000 Certified
Kawashima Manufacturing Co., Ltd.
Pre-Bend
(10-20deg.)
FullBend
(90deg.)
CA185_240_292_SMPMBetweenRev.00 27-Apr-2012
1-3-5 Higashiikuta, Tama-ku,
Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621
http://www.kmco.biz/ e-mail: sales@kmco.co.jp