Fluorescent High Bay for High Mounting Applications
lumen maintenance comparison hid vs. fluorescent
40000
30000
total
lumen
output
400W M-H
4X54W T5HO
20000
6X54W T5HO
6X32 T8 (PLUS)
10000
00
0
0
36
00
0
32
00
00
28
0
24
0
00
00
20
00
16
0
00
12
0
80
00
40
0
0
hours of operation
h.i.d.
• Metal Halide (MH) has
traditionally been the
common solution in
High Bay applications.
• Superior optical design
puts the light where
you want it.
• Good initial fixture light
output.
• Wide temperature
range – operates
reliably in areas
where temperatures
can exceed 120˚ F or
fall below 50˚ F.
• Can operate in
severe environments
that are corrosive or
extremely dirty.
Contents
H.I.D. vs. Fluorescent . . . . . .1, 2
Energy Savings . . . . . . . . . . .3, 4
I5/I8 Series . . . . . . . . . . . . . .5, 6
HB Series . . . . . . . . . . . . . . . .7, 8
HBO Series . . . . . . . . . . . . . . . . .9
High Ambient Applications . .10
MB Series . . . . . . . . . . . . . . . . .11
2HBG, 2HBHD Series . . . . . .12
Options & Accessories . .13, 14
I5/I8, HB Ordering . . . . . . . . .15
HBO, HA, MB Ordering . . . . .16
2HBG, 2HBHD Ordering . . . .17
F-Bay Application . . . . . . . . . . .18
1
thermal effect on fluorescent and hid lamps
20
00
relative
lumen
output
%
80
HID
60
T8
T5HO
40
20
0
0
5
10
15
20
25
30
35
40
45
50
55 60
temperature in ˚c
fluorescent high bays
• Energy Savings – 30-50% energy
reduction for comparable light levels.
• Superior Lumen Maintenance –
maintain 90-95% of initial light output
and extended life. Last 25,000 hours
based on 10 hour starts.
• Improved Color Rendering –
Fluorescent maintains consistent color
through life and has a color rendering
index (CRI) of 85...improves visual acuity!
• Instant On/Off – in an event of power
interruption, fluorescent lamps are back
on instantly. Integral stand-by emergency
battery packs are also available.
• More Energy Savings – Instant on/off
makes fluorescent control friendly. Use
with motion sensors to further reduce
energy consumption. Dimming is also
an option.
Reduce Energy Costs.....
Save Money!
2
linear fluorescent replaces
400w metal halide one for one.....
with half the energy.
additional benefits
f-bay
f-bay
metalux
2hb-632
metalux
i5-454t5
400w
metal halide
22,302
20,000
36,000
Lamp Lumen Depreciation
.93
.95
.60
Avg. Fixture Efficiency
.937
.936
.887
19,434
17,784
19,159
226 Watts
232 Watts
455 Watts
86
77
42
fixture
comparison:
Initial Lumens
Maintained (Useable) Lumens
Energy Consumed
Maintained Lumens/Watt (LPW)
the standard
Three to six lamp T5 or T8
cross-section allow Cooper’s
F-Bays to be used in many
applications and various
mounting heights. F-Bays can
be customized with many
options and accessories to
match specific requirements.
• Lumen uniformity with reduced direct glare.
• Negligible color shift throughout life.
• Linear source reduces troublesome shadows.
• Environmentally friendly by reducing green
house gases through energy reductions.
According to EPA conversion guidelines,
emissions pollution reductions over ten
years are estimated to be equivalent to:
planting 320 million trees, removing
247 million cars, and saving 158 billion
gallons of gasoline.
f-bay
f-bay
metalux
2hb-632
metalux
i5-454
350w
pulse start
400w
high bay
Footcandles produced
with new lamps
26
24
38
40
Footcandles after
10,000 hours
25
23
25
27
Footcandles after
16,000 hours
24
23
23
24
Energy Consumed
225W
232W
386W
455W
light level
comparison:
Spacing= 25' Centers
Mounting Height= 31'
Luminaire Dirt Depreciation= 0.88
Lamp Lumen Depreciation= 0.6 (M.H.) 0.93 (T8) 0.95 (T5HO)
save energy!
Visit Cooper Lighting’s website www.cooperlighting.com and click on F-Bay Payback
Calculator for a financial analysis of your lighting needs.
3
a visible and money saving difference
The purpose of this example is to determine the energy savings associated with replacing Metal Halide
fixtures currently installed with Cooper Lighting’s F-Bay fixtures. The analysis assumes one for one
fixture replacement so that current electrical supply connections do not have to be relocated.
The major considerations are:
• F-Bays reduce energy costs by 50%
• F-Bays generate comparable or better light levels
• Occupancy sensors can further reduce energy costs by another 50%
• Improved color rendering enhances visual acuity
Application: Warehouse/Distribution Center
Building Size: 700 x 350 x 35
metal halide 400w
f-bay 2hb-632 (plus)
f-bay hb-454t5
w/acrylic refractor
w/6% uplight component
w/6% uplight component
fixture type
Layout
Lamp &
Fixture
Data
Footcandles
Operating
Data
Savings
Analysis
Space Utilization: 9' Wide Aisles w/ 25' High Racking
Existing Lighting: (500) 400W MH w/Acrylic Refractor
FIXTURE MOUNTING HEIGHT
31'
31'
31'
FIXTURE SPACING
25'
25'
25'
INITIAL LAMP LUMENS
36,000
3,150
4,400
NUMBER OF LAMPS
1
6
4
INITIAL FIXTURE LUMENS
36,000
18,900
17,600
BALLAST FACTOR
1.0
1.18
1.0
INITIAL FIXTURE LUMENS (ballast corrected)
36,000
22,302
17,600
LAMP LUMEN DEPRECIATION
0.6
0.93
0.95
LUMINAIRE DIRT DEPRECIATION
0.88
0.88
0.88
FIXTURE EFFICIENCY
.887
0.937
0.936
MAINTAINED FIXTURE LUMENS
16,860
17,102
13,772
232
FIXTURE WATTS
455
226
FIXTURE LUMENS/WATT
37
76
59
CRI
70
85
85
FC BELOW FIXTURE
26
27
23
FC BETWEEN FIXTURES
20
23
22
VERTICAL FC
7.3
7.0
7.6
NUMBER OF FIXTURES
500
500
500
SYSTEM KW
227.5
113
116
COST PER KWH
$0.08
$0.08
$0.08
HRS/DAY
24
24
24
DAYS/WEEK
7
7
7
WEEKS/YEAR
52
52
52
TOTAL HRS/YEAR
8,736
8,736
8,736
ANNUAL ENERGY COSTS
$158,995
$78,973
$81,070
$80,021
$77,925
ANNUAL SAVINGS
4
Surface or suspension mounting
(cable, chain, pendant mount or
top connector box)
Optional uplight apertures
(approximately 8% uplight component)
White enamel finish
improves efficiency
and protects from
corrosion
Latched retention of optics
(safety leader restraints)
allows for easy access
Occupancy sensor is
availble to instantly turn
lights on and off.
Saves more energy!
Modular optics include open, lens,
wireguard, crossblade or
asymmetric directional louver
2, 3 & 4 lamp versions in nominal
4' and 8' tandem models
UL/CUL listed to meet U.S and
Canadian safety standards
Optical distribution options allow for precise light control
Aisle - enhanced specular aluminum.
Minimum 95% total reflectivity
General - paint-after-fabrication polyester powder coat.
Minimum 90% total refectivity
(see below for photo)
The F-Bay I5/I8 series is an ideal
solution for high mounting height
i5 & i8 optical distributions
industrial or retail applications
with an attractive, professional
style. F-Bay I5/I8 optics have
been optimized to provide
maximum performance from either
T5 or T8 lamps. Optional uplight
component is available to enable
excellent ceiling uniformity.
5
Narrow Aisle –
General Ambient –
(Specular Enhanced Aluminum)
(White Painted Finish)
i5 & i8 shielding optics
Open – For
Frosted Acrylic Lens
maximum
light output
– In white doorframe
w/”Herringbone” patterned end rail
Heavy Duty Wire
Guard – Finished in
white. Can be used
alone or in combination
with other shielding
TBW– Thin Blade White
Asymmetric Louver – Can
Baffle w/23˚ longitudinal
shielding
be oriented in either direction
for flexibility
i5 & i8 application suitability matrix
i5 & i8 lamp configurations
3-lamp t5/t8
2-lamp t5/t8
i5/i8
4-15/16"
[126mm]
4-15/16"
[126mm]
4-5/8"
[118mm]
11" [280mm]
X=2-3/4"
[70mm]
# Lamps
Source
X
3
T5HO
4
T5HO
3
T8
4
T8
X
11" [280mm]
4-lamp t5/t8
4-15/16"
[126mm]
4-15/16"
[126mm]
X=2-11/32"
[60mm]
2-lamp biax
X
X
4-5/8"
[118mm]
11" [280mm]
X
11" [280mm]
mounting height
40'
30'
20'
4-lamp biax
3-lamp biax
10'
X=2-3/4"
[70mm]
X
X
11" [280mm]
X=2-11/32"
[60mm]
X
X
X
11" [280mm]
applications replaces
4-15/16"
[126mm]
4-15/16"
[126mm]
400W HID
400W HID
250W HID
250W HID
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
Manufacturing
Retail
Cafeteria
Manufacturing
Retail
Cafeteria
6
Surface or suspension mounting
(cable, chain, pendant mount or
top connector box)
Optional uplight apertures
(approximately 8% uplight component)
Occupancy sensor is availble to
instantly turn lights on and off.
Saves more energy!
White enamel finish
improves efficiency
and protects from
corrosion
Modular optics include open,
wireguard or lens
4 and 6 lamp downlight lamp versions 24" and
15" wide housings 4' models only
UL/CUL listed to meet U.S and
Canadian safety standards
Optical distribution options allow for precise light control
Aisle - enhanced specular aluminum.
Minimum 95% total reflectivity
General - paint-after-fabrication polyester powder coat.
Minimum 90% total refectivity
(see below for photo)
The HB series is an ideal solution
for high mounting height industrial
hb optical distributions
or retail applications. F-Bay HB
optics have been optimized to
provide maximum performance
from either T5 or T8 lamps.
Optional uplight component is
available to enable excellent
ceiling uniformity.
Narrow Aisle –
(Specular Enhanced Aluminum)
7
General Ambient –
(White Painted Finish)
hb shielding optics
Open – For maximum
light output
Heavy-Duty Wireguard
and Lens –
Finished in white.
Acrylic Lens – A wide choice
Thin Blade White Baffle –
of acrylic lenses in a white extruded
steel doorframe (G1 & G2 optional)
Finished in white.
hb lamp configurations
hb application suitability Matrix
2-lamp t5/t8
hb
4-3/4"
[121mm]
X=6-5/16"
[161mm]
# Lamps
Source
X
4
T8
4
T5HO
4
T8
4
T5HO
6
T8
6
T5HO
250-400W HID
250-400W HID
250-400W HID
250-400W HID
250-400W HID
250-400W HID
Warehouse
Manufacturing
Retail
Warehouse
Manufacturing
Retail
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
Warehouse
Manufacturing
Gymnasium
Auditorium
Convention Ctr
Big-Box Retail
15-7/16" [392mm]
40'
mounting height
3-lamp t5/t8
4-3/4"
[121mm]
X=3-9/16"
[91mm]
X
X
15-7/16" [392mm]
4-lamp t5/t8
4-3/4"
[121mm]
X=2-7/8"
[74mm]
X
X
X
30'
20'
10'
applications replaces
15-7/16" [392mm]
4-lamp t5/t8
4-3/4"
[121mm]
X=5"
[127mm]
X
X
X
24" [610mm]
6-lamp t5/t8
4-3/4"
[121mm]
X=3-12"
[89mm]
2hb
X
X
X
X
X
24" [610mm]
8
Surface or suspension mounting
(cable, chain, pendant mount or
top connector box)
Optional uplight apertures
(approximately 5% uplight component)
4, 6 and 8 lamp versions
for HBO (6 & 8 for HBOT)
White enamel finish
improves efficiency
and protects from
corrosion
hbo lamp configurations
4-lamp t5/t8
Occupancy sensor is availble to
instantly turn lights on and off.
Saves more energy!
5-1/16"[129mm]
X=4"
[102mm]
X
X
UL/CUL listed to meet U.S and
Canadian safety standards
X
16-5/16" [414mm]
Optical distribution options allow for precise light
control (aisle or general)
Aisle - enhanced specular aluminum.
Minimum 95% total reflectivity
General - paint-after-fabrication polyester powder coat.
Minimum 90% total refectivity
The HBOT series provides
structural rigidity
6-lamp t5/t8
5-1/16"[129mm]
X=4"
[102mm]
X
X
X
X
X
24-5/16" [617mm]
hbo application suitability matrix
8-lamp t5/t8
5-1/16"[129mm]
X=4"
[102mm]
hbo/hbot
X
X
X
X
X
X
32-5/16" [820mm]
X
# Lamps
Source
4
T8
4
T5HO
6
T8
6
T5HO
8
T8
8
T5HO
250-1000W
HID
250-1000W
HID
250-1000W
HID
250-1000W
HID
250-1000W
HID
250-1000W
HID
hbot lamp configurations
40'
5-3/16" [131mm]
X=4"
[102mm]
X
X
X
X
X
24-9/16" [624mm]
8-lamp t5/t8
5-3/16" [131mm]
X=4"
[102mm]
X
X
X
X
X
X
32-11/16" [830mm]
X
mounting height
6-lamp t5/t8
30'
20'
solution for high mounting height industrial or
retail applications. The optics have been optimized
to provide maximum performance from either T5
or T8 lamps. Optional uplight component is
available to enable excellent ceiling uniformity.
9
applications
The HBO and HBOT series offer an economical
replaces
10'
Warehouse
Warehouse
Warehouse
Warehouse
Warehouse
Warehouse
Manufacturing Manufacturing Manufacturing Manufacturing Manufacturing Manufacturing
Gymnasium
Gymnasium
Gymnasium
Gymnasium
Gymnasium
Gymnasium
Auditorium
Auditorium
Auditorium
Auditorium
Auditorium
Auditorium
Convention Ctr Convention Ctr Convention Ctr Convention Ctr Convention Ctr Convention Ctr
Big-Box Retail Big-Box Retail Big-Box Retail Big-Box Retail Big-Box Retail Big-Box Retail
The High Ambient (HA) system, featuring T5HO technology,
combines the high quality features of Cooper Lighting’s
F-Bay series, such as reliability, energy efficiency and
lighting quality with high ambient temperature operation.
The HA system is UL listed to operate in environments up
to 65˚C. HA features a ballast warranty of five years
for ambient temperatures up to 55˚C and three years
up to 65˚C.
HA delivers 50% or more energy savings over 400W MH
and maintains designed light levels.
10
Easily suspended and adjusted
with various cable mounting
methods
Ideal for continuous row
mounting in narrow aisle
applications (available with
long connector for row
alignment)
White enamel finish
improves efficiency
and protects from
corrosion
Occupancy sensor is availble to
instantly turn lights on and off.
Saves more energy!
UL/CUL listed to meet U.S and
Canadian safety standards
Specular MIRO 4 reflectors for precise light control.
Three optical distribution patterns are available
Normal - enhanced specular aluminum.
Minimum 95% total reflectivity
Focus - enhanced specular aluminum.
Minimum 95% total reflectivity
Task - paint-after-fabrication polyester powder coat.
Minimum 90% total refectivity
mb lamp configurations
focus beam 1 or 2 lamp
task beam 1 or 2 lamp
X
X
The F-Bay MB series (Micro-Bay) is
a functional and multi-purpose
T5
narrow profile fluorescent High-
1-31/32" [51mm]
3-9/32"
[84mm]
X=2-11/16"
[69mm]
Bay that incorporates premium
1"
[26mm]
X=2-11/16"
[69mm]
4-5/16"
[110mm]
X
1-31/32" [51mm]
3-9/32"
[84mm]
normal beam 1 or 2 lamp
1-7/16"
[37mm]
4-5/16"
[110mm]
1-31/32" [51mm]
3-9/32"
[84mm]
X=2-11/16"
[69mm]
1-3/16"
[31mm]
4-5/16"
[110mm]
performance and construction
focus beam 1 or 2 lamp
task beam 1 or 2 lamp
normal beam 1 or 2 lamp
X
X
X
durability. Designed for both T5
and T8 fluorescent technology,
the MB Series offers both high
performance and application
versatility.
11
T8
3-5/32"
[81mm]
X=2-11/16"
[69mm]
29/32"
[24mm]
7-3/16"
[183mm]
3-5/32"
[81mm]
X=2-11/16"
[69mm]
29/32"
[24mm]
7-9/16"
[193mm]
3-5/32"
[81mm]
X=2-11/16"
[69mm]
29/32"
[24mm]
7-3/32"
[181mm]
Modular optics
include open, lens
or wireguard
White enamel finish
improves efficiency
and protects from
corrosion
Hole-free housing
Particulock gasket
system provides
200 psi hose
down rating
4 or 6 lamp versions
The 2HBG series is an ideal
The 2HBHD series is designed
Occupancy sensor is availble to
instantly turn lights on and off.
Saves more energy!
solution for high mounting
height industrial or retail
applications that require a
recessed luminaire. The 2HBG
for use in high mounting height
applications where periodic cleaning
with high pressure is required.
UL/CUL listed to meet U.S and
Canadian safety standards
This surface mounted luminaire
optics have been optimized to
has a hole-free design and is
provide maximum performance
enclosed and gasketed to provide
from either T5 or T8 lamps.
200psi hose down protection.
hb application suitability matrix
2hbg lamp configurations
6-lamp t5/t8
2hbg
4-5/8"
[117mm]
X=3-12"
[89mm]
X
X
X
X
X
# Lamps
Source
2hbhd
6
T8
6
T5HO
4
T8
4
T5HO
6
T8
6
T5HO
400W
HID
400W
HID
250-400W
HID
250-400W
HID
250-400W
HID
250-400W
HID
Retail
Convention
Center
Gymnasium
Retail
Convention
Center
Gymnasium
Food
Processing
Industrial
Food
Processing
Industrial
Food
Processing
Industrial
Food
Processing
Industrial
23-3/4" [603mm]
2hbhd lamp configurations
4-lamp t5/t8
4-1/2"
[115mm]
X=5"
[127mm]
X
X
X
23-11/16" [602mm]
mounting height
40'
30'
20'
6-lamp t5/t8
10'
X
X
X
X
23-11/16" [602mm]
X
applications
X=3-1/2"
[89mm]
replaces
4-1/2"
[115mm]
12
Mounting Options
Mounting options.... quickly & securely
Chain
Cable
Stem
AYC Chain Set – (2) Sturdy Wire Hooks and
36" Chain Sets c/w S-Hooks.
Cable Sets – CCA (48" or 120" adjustable)
and CCF (12", 15", 18", 21", 24" or 27" fixed
length) Stainless Steel Aircraft Cable Kits.
Available in non-power feed and PFC (coil power
cord) or PFS (straight power cord).
Stem Sets – Fixed, Swivel or Adjustable Stem
Sets available in various lengths.
“Y” Toggle
Loop Hanger
Mounting Toggle
and 10' or 25'
cable
10' or 30' Loop
Hanger w/#2
Cable
Single Toggle
10' or 30' Single
Toggle w/#2
Cable
Mounting Options
Row Mount
End plates provided with
the “Quick-Tab” joining
system for ease of row
mounting. Blank end
plates provided for row
ends.
Cord & Plug
Uplight Option
3' or 6' long Power Cord & Plug sets
available for various power supply
voltages (please specify voltage)
Optional uplight component to
illuminate the ceiling available
on all models.
Power Cord Sets
3' or 6' long Power Cord sets also
available (please specify voltage)
13
Pre-Lamp
Emergency Battery Packs
Quick Disconnect Plug
Factory installled lamps
save labor on jobsites.
Self-contained integrally mounted
in the fixture operate lamps at
emergency levels for 90
minutes upon loss of
primary power.
Pre-wired between the ballast
and the power supply,
this feature allows
for internal cut-off
of power supply
for service
convenience.
Mounting Accessories
Two Point
Suspension
Single Point Cable Kit
SINGLE POINT
Stainless Steel Cable Kit for single point
suspension. (fixture dropped below
mounting point by 13")
Use with TCB to minimize
cantilevering and rotation.
TWO POINT
(fixture dropped
below mounting
points by 29")
Mounting Accessories
Top Connector Box (tcb)
Hook & Safety Hook
Loop
Retrofit Hanger
Suitable for conduit mounting or for use
with fixture hook, loop or safety hook.
(Recommended for use with chain or cable
set to prevent cantilevering and rotation
from a central mounting point).
ideal for retro-fit
opportunities!!!
Fixture Hook 2-1/2"
(must be used with Top
Connector Box)
Fixture Loop 2-1/2"
(must be used with
Top Connector Box)
Cast Aluminum Hanger
w/Togglr Nut & Carriage
Bolt for quick installation
(must be used
with Top
Connector Box)
Top Ballast Access Plate
Allows for removal or service of
ballast from above without
disturbing internal optics.
Occupancy Sensor.... saves more energy!
Provides switching capabilities with adjustments for
time delay, sensitivity, and lux levels.
Designed specifically for aisle lighting
applications, it provides a rectangular
coverage pattern of 15' x 40'
when mounted at a 40'
mounting height. Full 360˚
coverage also available.
MWS
Job Pack
Factory installed Modular Wiring System provides low cost
installation of branch
circuit wiring.
Fixtures pallet packed with
protective end caps to minimize
trash on sites.
Unit Pack
Fixtures individually packaged with
corrugated carton and internal pads.
14
i5/i8
I 5 / I 8 O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : 8 T I 5 - 2 5 4 T 5 - T BW- 1 2 0 V- E B T 1- U P L
Length
Blank=4' Length
8T=8' Length
Series
I5=T5 Industrial
I8=T8 Industrial
Mounting Arrangement
Blank=Stand Alone
R=Continuous Row Mount
No. of Lamps
2=2 Lamps (T5)
3=3 Lamps (T5, T8)
4=4 Lamps (T5)
T2=2 Tandem Lamps (Biax)
T3=3 Tandem Lamps (Biax)
T4=4 Tandem Lamps (Biax)
Lamp Type I5
28T5=T5 Std (4') Lamps
54T5=T5HO (4') Lamps
BX40=40W Biax Lamps
BX50=50W Biax Lamps
BX55=55W Biax Lamps
Wireguard
Blank=No Guard
WG=Heavy Duty
Wireguard
Lamp Type I8
32=32W T8 (48")
Distribution Optic
Blank=Aisle
G=General
Downlight Optic
Blank=Open
TBW=Thin White Baffle
FL=Frosted Acrylic Lens & Frame
ASY=Asymmetric Directional Louver
(1)
Voltage
UNV=Universal
120/277 Voltage (1)
UNC=Universal
347/480 Voltage (T5 linear
only)(1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - for lamps installed
Emergency - for EM installed
NOTES: Not available when specifying emergencies, voltage must be specific.
For complete product data, reference the Fluorescent Specification binder. Specifications &
dimensions subject to change without notice. Consult your Cooper Lighting Representative
for availability and ordering information.
Ballast Type
Options
(See Options &
EB5 =T5 Biax Electronic Instant Start.
Accessories
Total Harmonic Distortion < 20%
Pages 13, 14)
No. of Ballast
1, 2 or 3
TEB5 =T5 Biax Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EBT =T5 Linear Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
LEOC8 =T8 Magnetic Energy Saving
ER8 =T8 Electronic Program Rapid Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 =T8 Electronic Instant Start. Total Harmonic
Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS = T8 Electronic Instant Start. High
Ballast Factor >1.13. Total Harmonic
Distortion < 20%
No. of
Ballast 1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total Harmonic
Distortion < 10%
No. of Ballast
1, 2 or 3
DIM=Dimming
DLS=Digital Lighting System Dimming
Packaging
U=Unit Pack
hb
H B O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : H B - R - 2 3 2 - A- 1 2 0 V- E B 8 1
Width
Blank=15"
2=24"
Series
HB=High Bay
Mounting Arrangement
Blank=Stand Alone
R=Continuous Row Mount
No. of Lamps
2=2 Lamps (5)
3=3 Lamps (5)
4=4 Lamps
6=6 Lamps (6)
Lamp Type
BX40=40W Biax Lamps (24") (3)
BX55=55W Biax Lamps (24") (3)
32=32W T8 Lamps (48")
28T5=28W T5 Lamps (48")
54T5=T5HO Lamps (48")
Distribution Optic
Blank=Aisle
G=General
(1)
NOTES: Products also available in non-US voltages and frequencies for
(2)
international markets. Not available when specifying emergencies, voltage
(3)
(4)
must be specific. Biax available in 6-lamp only. Not available for biax
(5)
(6)
model.
15" width only.
24" width only
15
For complete product data, reference the Fluorescent Specification binder.
Specifications & dimensions subject to change without notice. Consult your
Cooper Lighting Representative for availability and ordering information.
Downlight Optic
A=Prismatic Acrylic
Lens & Doorframe
WG=Wireguard &
Doorframe(4)
A/WG=Acrylic Lens,
Wireguard &
Doorframe(4)
CL=Clear Acrylic Lens
& Doorframe
SWG=Field Installable
Wireguard
Voltage (1)
UNV=Universal
120/277 Voltage (2)
UNC=Universal
347/480 Voltage (T5 linear only)
120V=120 Volt
277V=277 Volt
347V=347 Volt
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - Lamps installed
Emergency - EM installed
Options
Ballast Type (1)
(See Options
EB8 =T8 Electronic Instant Start.
& Accessories
Total Harmonic Distortion < 20% Pages 13, 14)
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
2
TEB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
2
EBT =T5 Linear Electronic Program Rapid
Start Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
DIM=Dimming
DLS=Digital Lighting System Dimming
Packaging
U=Unit Pack
hbo/hbot/ha
H B O / H B O T / H A O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : 3 H B O - 8 3 2 - 1 2 0 V- E B 8 2
Width
Blank=15" wide
2=24" wide
3=32" wide
Series
HBO=High Bay Open Version
HBOT=High Bay Open Top Version
HA=High Ambient
No. of Lamps
4=4 Lamps
6=6 Lamps
8=8 Lamps
Wattage (Length)
32=32W T8 (48") Lamps
28T5=28W T5 (48") Lamps
54T5=54W T5HO (48") Lamps
Voltage (1)
UNV=Universal
120/277 Voltage (2)
UNC=Universal
347/480 Voltage
(T5 linear only) (2)
120V=120 Volt
277V=277 Volt
347V=347 Volt
Options
Ballast Type (1)
(See Options &
EB8 =T8 Electronic Instant Start.
Accessories
Total Harmonic Distortion < 20%
Pages 13, 14)
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - Lamps installed
Emergency - EM installed
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EBT =T5 Linear Electronic Program Rapid
Start. Total Harmonic Distortion < 10%
No. of Ballast
1 or 2
DIM=Dimming
DLS=Digital Lighting System Dimming
Distribution Optic
Blank=Aisle (Aluminum)
G=General (White Painted)
(1)
NOTES: Products also available in non-US voltages and frequencies for international markets.
specifying emergencies, voltage must be specific.
(2)
Not available when
Packaging
U=Unit Pack
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change
without notice. Consult your Cooper Lighting Representative for availability and ordering information.
mb
M B O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : M B - 1 5 4 T 5 - 1 2 0 V- E B T 1
Tandem
Blank=4' Length
8T=8' Length
Lamp Types
54T5=54W T5/HO (4' Unit)
32=32WT8
Voltage
UNV=Universal
Voltage 120-277
Series
MB= T5 Micro-Bay
Reflector
FB=Focus Beam
TB=Task Beam
NB=Normal Beam
Options
Number of Lamps
(Not included)
1=1 Lamp
2=2 Lamps
NOTES:
(1)
Products also available in non-US voltages and frequencies for international markets.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject
to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.
Ballast Type (1)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
Options
(See Options &
Accessories
Pages 13, 14)
Packaging
U=Unit Pack
PAL=Pallet Pack
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EBT =T5 Linear Electronic Program Rapid
Start. Total Harmonic Distortion < 10%
No. of Ballast
1 or 2
DIM=Dimming
DLS=Digital Lighting System Dimming
16
2hbg
2 H B G O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : 2 H B G - 6 5 4 T 5 - A- U N V- E B T 2 - U
Downlight Optic
Blank=Open
A=Prismatic Acrylic
Lens & Aluminum
Doorframe
CL=Clear Acrylic
Lens & Aluminum
Doorframe
Width
2=24"
Series
HB=High Bay
Trim Type
G=Grid/Lay-in (Standard)
F=Flange Trim
Options
(See Options
& Accessories
Pages 13, 14)
Voltage (1)
UNV=Universal
120/277 Voltage
UNC=Universal
347/480 Voltage (T5 linear only)
120V=120 Volt
277V=277 Volt
347V=347 Volt
No. of Lamps
6=6 Lamps
Lamp Type
32=32W T8 Lamps (48")
28T5=28W T5 Lamps (48")
54T5=T5HO Lamps (48")
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - Lamps installed
Emergency (T8 only) - EM installed,(1)
Distribution Optic
Blank=Aisle
G=General
(1)
NOTES: Products also available in non-US voltages and frequencies for international
(2)
markets. Not available when specifying emergencies, voltage must be specific.
Ballast Type (1)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EBT =T5 Linear Electronic Program Rapid
Start. Total Harmonic Distortion < 10%
No. of Ballast
1 or 2
Packaging
U=Unit Pack
PAL=Job Pack,
out of carton
PALC=Job
Pack, in carton
For complete product data, reference the Fluorescent Specification binder. Specifications
& dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
2hbhd
2 H B H D O R D E R I N G I N F O R M AT I O N : S A M P L E N U M B E R : 2 H B H D - 6 5 4 T 5 - A- U N V- E B T 2
Width
2=24"
Series
HBHD=High Bay Hose Down
No. of Lamps
4=4 Lamps
6=6 Lamps
Lamp Type
32=32W T8 Lamps (48")
28T5=28W T5 Lamps (48")
54T5=T5HO Lamps (48")
Distribution Optic
Blank=Aisle
G=General
(1)
NOTES: Products also available in non-US voltages and frequencies for
(2)
international markets. Not available when specifying emergencies, voltage
(4)
must be specific. Use with general distribution reflector.
For complete product data, reference the Fluorescent Specification binder.
Specifications & dimensions subject to change without notice. Consult your
Cooper Lighting Representative for availability and ordering information.
17
Downlight Optic
Blank=Open
A=Prismatic Acrylic
Lens & Doorframe(4)
CL=Clear Acrylic
Lens & Doorframe
Voltage (1)
UNV=Universal
120/277 Voltage(2)
UNC=Universal
347/480 Voltage (T5 linear only)
120V=120 Volt
277V=277 Volt
347V=347 Volt
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - Lamps installed
Emergency - EM installed
Options
Ballast Type (1)
(See Options
EB8 =T8 Electronic Instant Start.
& Accessories
Total Harmonic Distortion < 20%
Pages 13, 14)
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EBT =T5 Linear Electronic Program Rapid
Start. Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
DIM=Dimming
DLS=Digital Lighting System Dimming
Packaging
U=Unit Pack
PAL=Palletized
Out of Carton
Ideal Solution For:
Retail – maximize energy savings while delivering excellent lumens per watt and consistent color throughout the store.
Warehouses & Manufacturing Facilities– excellent lumen maintenance prevents light levels from dropping
to unsafe or unacceptable levels and higher lumens per watt lower energy costs. The use of occupancy sensors
further reduce energy costs.
Gymnasiums, Cafeterias, Auditoriums– no need to wait for lights to turn on with the instant on feature,
plus occupancy sensors offer additional energy savings.
F-Bay Offers the Following Advantages:
• Superior solution with 50% energy savings
H.I.D.
• Excellent optics with comparable lumen output
– Specular reflectors ideal for Hi-Bay applications
– White reflectors ideal for Low-Bay applications
– 8% Uplight option provides ceiling uniformity
A Visible
• Instant On/Off allows for use of Occupancy
and
Sensors to optimize energy savings
Money
Saving
• Multiple mounting options offer flexibility and
Difference
reduce labor costs
• Superior lumen maintenance and lamp life
Combine these benefits with Cooper Lighting’s
unparalleled product breadth and experience and you have
the best fluorescent high bay solution in the industry working
for you.
F-BAY
Cooper Lighting is your source for fluorescent high bay solutions for
every application in commercial, industrial and institutional settings.
18
Customer First Center
1121 Highway 74 South
Peachtree City, Georgia 30269
770 486 4800
Fax 770 486 4801
Domestic Facilities, USA
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
International Sales, USA
Peachtree City, Georgia
Canada
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
905 507 4000
FAX 905 568 7049
The Cooper Lighting Family
Halo
Cooper Lighting - Metalux
Cooper Lighting - Lumark
Cooper Lighting - Sure-Lites
Neo-Ray
Corelite
Portfolio
Iris
Shaper
Lumière
Invue
McGraw-Edison
Fail-Safe
MWS
DLS
RSA
Domestic Facilities, Canada
Calgary, Alberta
Chomedey, Laval P.Q.
Cooper Lighting, Inc.
All rights reserved
Printed in USA
Dimensions and specifications are subject to
change without notice.
www.cooperlighting.com
ADF060565