CPY250-A-PD-D / F-A
CPY Series LED Canopy / Soffit Luminaire –
Pendant Mount – Drop / Flat Lens – 82 Watts
Product Description
Slim, low profile, easy mounting from below the deck. Luminaire housing
constructed of rugged cast aluminum with integral heat sink specifically
designed for LED. Pendant mount is intended to be mounted by 3/4 IP
pendant (by others). J-Box supplied for customer wiring. Direct imaging of
LEDs is eliminated with high efficiency patterned flat or 0.91" (23mm) drop
glass lens.
Drop Lens
Flat Lens
Performance Summary
Made in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
CCT: 5700K (+ / - 500K) Standard, 4000K (+ / - 300K)
Limited Warranty†: 10 years on luminaire / 10 years on Colorfast DeltaGuard® finish
Accessories
Field Installed Accessories
XA-PSFTG
Pendant Mount
XA-PS18KIT
Pendant Fitting
XA-PS22KIT
22" (559mm) Pendant Kit
- Pendant height from ceiling surface to bottom
of fixture; mounting accessories or surface
boxes will add to overall height
18" (457mm) Pendant Kit
- Pendant height from ceiling surface to bottom
of fixture; mounting accessories or surface
boxes will add to overall height
15.0"
(382mm)
TPS-2
Tamper Resistant Driver Bit
XA-PS12KIT
12" (305mm) Pendant Kit
- Pendant height from ceiling surface to bottom
of fixture; mounting accessories or surface
boxes will add to overall height
15.0"
(382mm)
Pendant Not
Included
8.0"
(203mm)
5.9"
(149mm)
Ordering Information
Example: CPY250-A-PD-D-A-UL-WH-OPTIONS
CPY250
A
PD
A
Product
Version
Mounting
Optic
Input Power Designator
Voltage
Color Options
CPY250
A
PD
Pendant
D
0.91" (23mm)
Drop Lens
F
Flat Lens
A
82W
UL
Universal
120–277V
UH
Universal
347–480V*
WH
White (Standard)
SV
Silver
BK
Black
BZ
Bronze
PB
Platinum Bronze
† See www.cree.com/lighting/products/warranty for warranty terms.
* For input power for 347–480V, refer to the Lumen Output, Electrical, and Lumen Maintenance data table below.
Rev. Date: 10/17/13
www.cree.com/lighting
T (800) 236-6800
F (262) 504-5415
Options
40K 4000K Color Temperature
- Color temperature per luminaire
CPY250-A-PD-D / F-A
Product Specifications
Photometry
All published luminaire photometric testing performed to IESNA LM-79-08
standards by a NVLAP certified laboratory.
CONSTRUCTION & MATERIALS
• Slim, low profile, easy mounting from below the deck
• Luminaire housing constructed of rugged cast aluminum with integral
heat sink specifically designed for LED
3373
150˚
80'
80'
150˚
2530
• Pendant mount is intended to be mounted by 3/4 IP pendant (by others)
60'
120˚
120˚
1687
• J-Box supplied for customer wiring.
90˚
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer
with an ultra-durable powder topcoat, providing excellent resistance to
corrosion, ultraviolet degradation and abrasion. Standard is white. Bronze,
black, silver, and platinum bronze are also available
0'
20' 40'
60' 80'
24.4
18.3
0˚
40'
20'
• Below ceiling serviceable driver for ease of upgrade or replacement
40' 20'
60'
843
Candlepower Trace: Vertical plane through
horizontal angle of maximum candlepower.
0'
90˚
12.2
6.1
.5
.1 .2 1 2 5
0m
CURB LINE
20'
6.1
40'
12.2
60'
60˚
60˚
ELECTRICAL SYSTEM
30˚
• Input Voltage: 120–277V or 347–480V, 50 / 60Hz, Class 1 drivers
• Total Harmonic Distortion: < 20% at full load
6.1
0m
6.1
12.2 18.3
24.4
24.4
Position of vertical plane
of maximum candlepower.
30˚
ITL Test Report #: 76866
CPY250-A-**-F-A-UL
Initial Delivered Lumens: 8,821
• Power Factor: > 0.9 at full load
18.3
80'
24.4 18.3 12.2
CPY250-A-**-F-A-UL
Mounting Height: 15' (4.6m)
Initial Delivered Lumens: 8,000
Initial FC at grade
• Integral 6kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C / D breaker should
be used
3457
150˚
150˚
80'
80'
60'
40' 20'
0'
20' 40'
60' 80'
24.4
2593
REGULATORY & VOLUNTARY QUALIFICATIONS
120˚
120˚
1728
• cULus Listed
• Suitable for damp locations
• Consult factory for CE Certified products
90˚
18.3
60'
90˚
40'
864
Candlepower Trace: Vertical plane through
horizontal angle of maximum candlepower.
.1
20'
2
0'
90˚
• 6kV surge suppression protection tested in accordance with IEEE / ANSI
C62.41.2
20'
12.2
.2
.5 1
6.1
5
0m
CURB LINE
6.1
12.2
40'
60'
60˚
• Product qualified on the DesignLights Consortium™ (“DLC”) Products
List (“QPL”)
60˚
30˚
• Luminaire and finish endurance tested to withstand 5,000 hours of
elevated ambient salt fog conditions as defined in ASTM Standard B 117
18.3
6.1
0m
6.1
12.2 18.3
24.4
24.4
Position of vertical plane
of maximum candlepower.
30˚
CESTL Test Report #: 2013-0111
CPY250-A-**-D-A-UL
Initial Delivered Lumens: 8,356
• Meets Buy American requirements within ARRA
80'
24.4 18.3 12.2
CPY250-A-**-D-A-UL
Mounting Height: 15' (4.6m)
Initial Delivered Lumens: 8,000
Initial FC at grade
• Dark Sky Friendly, IDA Approved when ordered with “F” optic
Weight
Weight
12.5 lbs (5.7kg)
Lumen Output, Electrical, and Lumen Maintenance Data
CPY250 Canopy Luminaire
5700K
BUG
Ratings**
TOTAL CURRENT
System Watts
347–480V
120V
208V
240V
277V
347V
480V
B3 U2 G1
82
84
0.69
0.40
0.35
0.32
0.24
0.18
97%
B3 U0 G1
82
84
0.69
0.40
0.35
0.32
0.24
0.18
97%
Per TM-15-11
Per TM-15-11
8,000
B3 U2 G1
7,600
8,000
B3 U0 G1
7,600
D
F
* Actual production yield may vary between -4 and +10% of initial delivered lumens.
** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf.
*** For recommended lumen maintenance factor data see TD-13. Calculated L70 based on 6,000 hours LM-80-08 testing: > 150,000 hours.
© 2013 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change. See
www.cree.com/patents for patents that cover these products. Cree®, the Cree logo, and Colorfast DeltaGuard®
are registered trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. DesignLights
Consortium™ and the DLC QPL logo are trademarks of Northeast Energy Efficiency Partnerships, Inc.
www.cree.com/lighting
50K Hours
Projected Lumen
Maintenance Factor
@ 15˚C (59˚F)***
System Watts
120–277V
BUG
Ratings**
Initial
Delivered
Lumens*
Initial
Delivered
Lumens*
Optic
4000K
T (800) 236-6800
F (262) 504-5415