COMM/DATA
PROTECTION GUIDE
Lightning and Surge Protection for
Comm/Data Networks
www.tiinettech.com
Table of Contents
TABLE OF CONTENTS...........................................................................................1-2
NETWORK PROTECTION AND HAZARDS TO YOUR NETWORK..................... 3
RESPONSE OF VARIOUS TRANSIENT PROTECTORS...................................... 4
RECOMMENDED PROTECTION FOR VARIOUS APPLICATIONS..................... 5
PRIMARY PROTECTION MODULES..................................................................... 6-8
DELTA: HIGH ENERGY, FAST RESPONSE,
GAS TUBE: HIGH ENERGY, ECONOMICAL, LOW CAPACITANCE,
SOLID STATE: FAST RESPONSE, LOW ENERGY LET-THROUGH,
DSL MODULE: LOW CAPACITANCE, BALANCED, FAST RESPONSE,
LOW VOLTAGE DATA PROTECTORS: HIGH FREQUENCY DATA
BUILDING ENTRANCE TERMINALS (BET)
Series Overview...................................................................................................
9-10
SERIES 24, 25, and 26 OVERVIEW AND COMPARISON
Series 24: 66 Terminations......................................................................................11-12
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
Series 24: 110 Terminations.................................................................................... 13-14
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
Series 25: 66 & 110 Terminations............................................................................. 15
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
Series 25: Stub Input..............................................................................................16
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
Series 26: Stub Input & Output................................................................................ 17
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
CATEGORY 6 PROTECTION PRODUCTS
606 Protector Packs............................................................................................... 18
CATEGORY 5E PROTECTION PRODUCTS......................................................... 19
505E Protector Packs
MODULAR PROTECTOR PACKS FOR HIGH-SPEED DATA AND OTHER LOW VOLTAGE APPLICATIONS
1504 Protector Packs
WITH LVP PROTECTOR MODULES
1
Table of Contents
(cont'd)
GENERAL APPLICATION PROTECTOR PACKS, 1-PIN STYLE.............................. 20
504, 505, and 581
66/110 TERMINATION PROTECTION OF TELEPHONE SYSTEMS
Six Plus
66/110 TERMINATIONS NETWORK PROTECTION AND AC LINE PROTECTION
GENERAL APPLICATION PROTECTOR PACKS, 5-PIN STYLE...............................21-22
5-Pin Building Entrance Protectors
SPECIFICATIONS, MODEL NUMBERS, AND ORDERING INFORMATION
SECONDARY PROTECTORS................................................................................ 23
Omega Protector Packs
SECONDARY LINE PROTECTION FOR TELEPHONE SYSTEMS
Series 575 Sneak Fuse Assembly
SECONDARY LINE PROTECTION
578 Linebacker (PFTU)
EMERGENCY TELEPHONE SERVICE DURING A POWER FAILURE
DISTRIBUTION FRAME EQUIPMENT....................................................................24
88 Terminal Block Family
TO CONNECT EQUIPMENT ON DISTRIBUTION FRAMES
P399 100-PAIR PROTECTOR BLOCK.................................................................. 25-26
PROTECTOR BLOCKS FOR CONVENTIONAL CENTRAL OFFICE FRAMES WITH
8 INCH CENTER LINES
SERIES 28 XLBET EXTRA LARGE BUILDING ENTRANCE TERMINAL............ 27-28
HIGH PAIR COUNT PROTECTION AND DISTRIBUTION ON STANDARD RELAY RACKS
COMPETITOR PRODUCT REFERENCE............................................................... 29-30
All Specifications Subject to Change Without Notice
2
Network Protection
Sophisticated Equipment Demands Sophisticated Protection
•
An unprotected or insufficiently protected communications network is a hazard to both your employee’s
safety and your bottom line.
•
When a communications line is protected by Porta Systems products, hazards are quickly and safely shorted to
ground.
HAZARDS TO YOUR NETWORK
Lightning:
By far the most common cause of electrical surge damage to the communications network
is lightning. Lightning can enter your network in a number of ways. It might strike a telephone or power line, causing high voltage to enter the equipment through incoming lines,
or it might strike the ground and travel along buried cables.
Power Crosses:
Power crosses refer to incidents where a communications line comes in physical contact
with an electrical power line. This could be caused by a downed telephone pole where
phone and electrical lines have crossed. These incidents cause excessive AC current conditions to be carried into the communications system.
Power Faults:
Power faults should not to be confused with power crosses. In most buildings, the power
company’s neutral line is bonded to the telephone company’s cable. If current is introduced
onto this neutral line by any means, it can be transferred to the communications line and
into the equipment.
Induction:
Communications lines need not come in direct physical contact with lightning or power
overloads for a voltage spike or surge to be introduced on a line. These hazards can
be induced from nearby sources such as the magnetic field surrounding a power line.
Furthermore, when a brown out occurs, the power surge that accompanies the return to
normal service can be transferred to nearby communications lines.
Electrostatic Discharge:
Most people have experienced the effects of electrostatic discharge in the home by simply
walking across a carpet, touching a metal object and receiving a small shock. Similar type
of shocks can be transmitted to communications circuits through the build-up and discharge of energy in dry climates .
REGISTERED TO ISO 9001:2000
3
Response of Various Transient Protectors
Gas Discharge Tube (GDT)
• A robust balanced three-electrode design.
• Automatically resets after current surges of up to 10,000 Amps and high voltages.
• Attractive for protecting high-speed carrier lines, such as T1, due to Ultra Low Capacitance.
Solid State (S.S.)
•
•
•
•
Solid State thyristor based design.
Tighter voltage range which results in lower over-shoot voltage.
Quick transient response time.
Automatically resets after current surges of up to 100 Amps.
Delta (GDT/TVS)
• A robust balanced three-electrode GDT coordinated with Transient Voltage Suppressor
(TVS) diodes.
• Tighter voltage range which results in lower over-shoot voltage.
• Quick transient response time.
• Automatically resets after current surges of up to 20,000 Amps and high voltages.
Response of Overvoltage Protector
500
10KV/uSec (1KV pulse)
Over-Shoot Voltage
230V Gas Tube (GDT)
400
230V Delta- (GDT/Solid State)
Volts ( V )
300
200
230V Solid State (S.S.)
230V Nominal
100
0
0
100
200
300
400
Response Time
500
600
700
800
900
1000
Time (NanoSeconds)
Nanosecond = Billionth of a Second
Actual waveshapes recorded by Tektronix TDS520 Oscilloscope
4
Recommended Protection of Various Applications
Porta Systems Corp. is a leading provider of connection and protection products for public and private
telecommunications networks. Porta Systems’ Delta, a hybrid Solid State and Gas Tube Protector Module, reacts to
over-voltages in less than five nanoseconds and is the fastest in the industry. Over 100 patents for termination and
protection products attest to Porta’s innovative engineering and support of voice and data networks.
Performance Comparison Table
Protector Type
Gas Discharge Tube
(GDT)
Solid State
(Thyristor)
Delta
(GDT/TVS)
Response Time
Good
Best
Best
Voltage Precision
Good
Better
Best
Current Capability
Better
Good
Best
Low Capacitance
Best
Good
Better
Service Life
Better
Good
Best
Recommended Applications
Telephony Signals
Model
Technology
Application
3B1E, 175BCXN-230
Gas Tube 230 Volt
Analog (CO or Line Card), T1
4B1S, 115SCN-240
Solid State 240 Volt
Digital (CO lines)
4B1S (75), 115SCN-75
Solid State 75 Volt
Digital (Line Card)
195BCDXN-230
Delta 240 Volt
Digital (CO lines)
195BCDXN-75
Delta 75 Volt
Digital (Line Card)
Data Signals - (Low Capacitance, Low Voltage)
LVP18E1, LVP6-182
Solid State 18 Volt
Ethernet/LAN
LVP27E1, LVP6-272
Solid State 27 Volt
IP Cameras
(12-24V applications)
LVP6-652
Solid State 65 Volt
Ethernet/PoE
Note 1: The LVP18E and LVP27E are for Category 5E networks when used in series 505 and 1504 blocks.
Note 2: The LVP6-18, LVP6-27 and LVP6-65 are for Category 6 networks when used in series 606 blocks.
5
Primary Protection Modules
Over 400 Models—UL Listed Protection
for Every Application (7.5V to 400V)
The Porta Systems family of protector modules provides
primary voltage protection utilizing gas tube and solid state
elements. Primary/Secondary voltage and current protection is provided by incorporating one or more of the following technologies into the protection circuit:
•
•
•
•
•
•
•
Gas Tubes
Thyristors
TVS Diodes
Metal Oxide Varistor (MOV)
Heat Coils
Heat Sensors
Sneak Current Fuses
115SCN
115SCNHDSL
175BCXN
195BCDXN
MLVP27
15SCN
75BCXN
LVP27E
6
Primary Protection Modules
Gas Tube Protector
(UL LISTED. HIGH ENERGY,
ECONOMICAL, LOW CAPACITANCE)
Provides a highly reliable and robust
means of protecting equipment from
high energy voltage and current surges (up to 10KA). The protector includes
a heat-activated failsafe mechanism
that provides protection against a
sustained surge condition.
ORDERING INFORMATION:
CONFIGURATIONOVERCURRENT CROSS
PROTECTOR
REF.
75V
230V
400V
Single-Pin
NA
Heat Coil
—
—
—
75BCXN-230 75BCXN-400
95BCXN-75 95BCXN-230 95BCXN-400
Five-Pin
NA
Heat Coil
3B1E
4B1E
—
175BCXN-230 175BCXN-400
195BCXN-75 195BCXN-230 195BCXN-400
Solid State Protector
(UL LISTED. FAST RESPONSE, LOW
ENERGY LET-THROUGH)
With a response time of 5nanoseconds, these protectors
are recommended for protection
of sensitive equipment. An integral
fail-safe mechanism permanently
shorts the protector to ground in the
presence of a sustained surge condition.
ORDERING INFORMATION:
CONFIGURATIONOVERCURRENT CROSS
PROTECTOR
REF.
Single-Pin
Heat Coil
Five-Pin
Heat Coil
—
—
4B1S
—
75V
240V
15SCN-75 15SCN-240
05SCN-75 05SCN-240
115SCN-75 115SCN-240
105SCN-75 105SCN-240
300V
15SCN-300
05SCN-300
115SCN-300
105SCN-300
Low Voltage Data
Protectors
(UL LISTED. HIGH-FREQUENCY DATA,
ALARM, CCTV)
For protection of LAN equipment
and data communications circuits.
Solid state technology provides fast
reaction to hazardous voltage conditions and prevents damage to sensitive data equipment. For CAT 5E
applications use our 505E or 1504PX2
series blocks. (See page 19).
7
ORDERING INFORMATION:
CONFIGURATION OVERCURRENT
PROTECTION
7.5V
18V
27V
LVP18E
LVP27E
LVP65E
65V
Single-Pin
Sneak Fuse
LVP7.5E
Primary Protection Modules
DELTA™ Protector
(UL LISTED. HIGH ENERGY, FAST
RESPONSE)
Provides cutting edge, high-speed protection for sensitive communications and
data equipment particularly in high lightning areas. The DELTATM coordinates
very high speed diodes with a powerful,
three-element gas tube for overvoltage
protection. This provides fast response
time (clamps in 5 nanoseconds) and
high energy (20KA) sustainability. The
DELTATM protector also provides overcurrent protection using heat coils.
ORDERING INFORMATION:
CONFIGURATION
OVERCURRENT
PROTECTOR
75V
230V
350V
Single-Pin
Heat Coil
95BCDXN-75
95BCDXN-230
95BCDXN-350
Five-Pin
Heat Coil
195BCDXN-75
195BCDXN-230
195BCDXN-350
xDSL Protection Modules
(LOW CAPACITANCE, BALANCED,
FAST RESPONSE)
Provides dependable protection for
the broadband communication provider.
Balanced, low capacitance circuitry
minimizes reflection and extends
DSL frequency operating range. Solid
State components minimize energy
let-through.
ORDERING INFORMATION:
CONFIGURATION
STYLE
230V
Single-Pin
SS/Heat Coil
15SCNHDSL-230
Five-Pin
SS/Heat Coil
115SCNHDS-230
(UL LISTED. FAST RESPONSE, LOW
ENERGY LET-THROUGH)
Provides dependable protection
for the broadband communication
provider. Balanced three-electrode
gas tube design and low
capacitance circuitry minimizes
reflection, maximizes DSL frequency
operating range and distance. Ideal
for POTS, ISDN, ADSL2/2+, SDSL,
HDSL, RADSL, and VDSL.
ORDERING INFORMATION:
CONFIGURATION
Single-Pin
Five-Pin
STYLE
330V
400V
GDT
Hybrid GDT/MOV
GDT
Hybrid GDT/MOV
75HAVN-330
175HAVN-330
75AVN-400
175AVN-400
-
8
Building Entrance Terminals (BETs)
S E R I E S 2 4 B E Ts
In order to safeguard buildings and personnel from dangerous electrical surges, the
National Electric Code (NEC) requires UL
497 Primary Protection for incoming communication lines. This requirement applies
to Service Providers (Telcos) at their demarcation point, and to Customer Premise owners
and installers for runs between buildings in
industrial, commercial, or campus environments. Failure to comply with this requirement not only creates a potentially dangerous
condition, but also can result in costly fines,
rework, and destruction of sensitive equipment.
A Porta Systems Building Entrance
Terminal (BET) equipped with its primary protectors meets or exceeds these
demands.
Suitable for use by both Service Providers (Telcos) at
their demarcation point and Customer Premise owners
and installers for runs between buildings in an industrial,
commercial, or campus environment.
24100-66-F66P
AVAILABLE WITH FACTORY INSTALLED &
TESTED PROTECTORS
• Choice of Single or Five Pin, Gas Tube, DELTA or
Solid State Protectors. See pages 7 & 8 for protectors.
PAIR COUNT
• Available in 25, 50 and 100 pairs
INPUT TERMINATION
• Available in 66, 110, 710, MS2 and factory stubbed
• Custom inputs available—contact Customer Service
OUTPUT TERMINATION
• Available in 66, 110, RJ 21
INTERNAL FUSIBLE LINK
SPLICE CHAMBER WITH COVER
• Cable knock outs for top or bottom cable entry
• Small swing radius— more room in tight quarters
OPTIONAL LOCKABLE PROTECTOR & EQUIPMENT
SIDE COVER
MULTIGROUND BUS BAR
• Allows approved bonding termination point
LINE DESIGNATION STRIP
VERTICALLY STACKABLE
• Up to 400 pairs
CONSTRUCTION
• 18 gauge welded steel housing
• Durable finish
• Compact, light weight, rugged
9
The Most Comprehensive Line of UL Listed BETs for Primary Protection
S E R I E S 2 5 B E Ts
No splice chamber provides for the smallest available
profile with termination blocks.
S E R I E S 2 6 B E Ts
Stub in and out provides the smallest possible profile for
protection, and drastically cuts punch-down labor.
26100-ST-MST
25100-110-M110PC
AVAILABLE WITH FACTORY INSTALLED &
TESTED PROTECTORS
• Choice of Five Pin Gas Tube, DELTA or
Solid State Protectors. See pages 7 & 8 for protectors.
AVAILABLE WITH FACTORY INSTALLED & TESTED
PROTECTORS
• Choice of Five Pin Gas Tube, DELTA or Solid
State Protectors. See pages 7 & 8 for protectors.
PAIR COUNT
• Available in 25, 50 and 100 pairs
PAIR COUNT
• Available in 25, 50 and 100 pairs
INPUT TERMINATION
• Available in 66, 110, 25ft — 26 gauge stub
• Custom stub lengths available–
contact Customer Service
INPUT STUB
• 25ft — 26 gauge cable stub providing fusible link
OUTPUT TERMINATION
• Available in 66 and 110
INTERNAL FUSIBLE LINK
OUTPUT STUB
• 25ft — 24 gauge cable stub
MULTIGROUND BUS BAR
• Allows approved bonding termination point
COVER INCLUDED WITH ALL MODELS
OFFSET INPUT AND OUTPUT STUBS
• For maximum density
MULTIGROUND BUS BAR
• Allows approved bonding termination point
VERTICALLY STACKABLE
LINE DESIGNATION STRIP
VERTICALLY STACKABLE (STUB INPUT MODELS)
CONSTRUCTION
• 16 gauge steel housing
• Durable finish
• Compact, light weight, rugged
CONSTRUCTION
• 16 gauge steel housing
• Durable finish
• Compact, light weight, rugged
All Specifications Subject to Change Without Notice
10
Series 24 Building Entrance Terminals—66 Terminations
(Available with Factory Installed & Tested Gas Tube, DELTA , or Solid State Protectors. See pages 7 & 8)
6 6 T E R M I N AT I O N
24100-66-M66P
SPECIFICATIONS: (66 TERMINATION)
Pair Count
25 PAIR
50 PAIR
100 PAIR
Dimensions (height x width x depth)
100 PAIR ORDERING INFORMATION
Weight (approx.)*
8" x 14.5" x 4" (20.3 cm x 36.8 cm x 10.2 cm)
8" x 14.5" x 4" (20.3 cm x 36.8 cm x 10.2 cm)
12" x 16.5" x 4" (30.5 cm x 41.9 cm x 10.2 cm)
7 lbs.
9 lbs.
12 lbs.
* Weight - Add approx 0.5 oz per installed module.
BET MODEL NUMBER DESIGNATION KEY
24/25/26 = BET SERIES
M = FIVE PIN
110 or 66 = TERMINATION
F = SINGLE PIN
25/50/100 = PAIR COUNT
RJ = RJ21 RECEPTACLE
ST = 25 FT. CABLE STUBBED
C = COVER
P = FACTORY INSTALLED PROTECTORS
11
MODEL NUMBER
24100-66-F66
24100-66-F66C
24100-66-F66P
24100-66-F66PC
24100-66-FRJ
24100-66-FRJC
24100-66-FRJP
24100-66-FRJPC
24100-66-M66
24100-66-M66C
24100-66-M66P
24100-66-M66PC
24100-66-MRJ
24100-66-MRJC
24100-66-MRJP
24100-66-MRJPC
PAIR
COUNT
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
TERM
PIN
PROTECTORS
INPUT OUTPUT CONFIGURATION INSTALLED
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
RJ
RJ
RJ
RJ
66
66
66
66
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
COVER
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
CUSTOMIZED CONFIGURATIONS AVAILABLE (MS2 OR 710 TERMINATIONS).
CONTACT CUSTOMER SERVICE AT: 1-800-937-6782.
6 6 T E R M I N AT I O N
24100-66-F66P
50 PAIR ORDERING INFORMATION
25 PAIR ORDERING INFORMATION
MODEL NUMBER
MODEL NUMBER
24050-66-F66
24050-66-F66C
24050-66-F66P
24050-66-F66PC
24050-66-FRJ
24050-66-FRJC
24050-66-FRJP
24050-66-FRJPC
24050-66-M66
24050-66-M66C
24050-66-M66P
24050-66-M66PC
24050-66-MRJ
24050-66-MRJC
24050-66-MRJP
24050-66-MRJPC
PAIR
COUNT
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
RJ
RJ
RJ
RJ
66
66
66
66
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
All Specifications Subject to Change Without Notice
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
24025-66-F66
24025-66-F66C
24025-66-F66P
24025-66-F66PC
24025-66-FRJ
24025-66-FRJC
24025-66-FRJP
24025-66-FRJPC
24025-66-M66
24025-66-M66C
24025-66-M66P
24025-66-M66PC
24025-66-MRJ
24025-66-MRJC
24025-66-MRJP
24025-66-MRJPC
PAIR
COUNT
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
RJ
RJ
RJ
RJ
66
66
66
66
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
12
Series 24 Building Entrance Terminals—110 Terminations
(Available with Factory Installed & Tested Gas Tube, DELTA, or Solid State Protectors. See pages 7 & 8)
11 0 T E R M I N AT I O N
24100-110-M110C
100 PAIR ORDERING INFORMATION
SPECIFICATIONS (1-PIN): (110 TERMINATION)
MODEL NUMBER
Pair Count
PAIR
COUNT
24100-110-F110
24100-110-F110C
24100-110-F110P
24100-110-F110PC
24100-110-FRJ
24100-110-FRJC
24100-110-FRJP
24100-110-FRJPC
24100-110-M110
24100-110-M110C
24100-110-M110P
24100-110-M110PC
24100-110-MRJ
24100-110-MRJC
24100-110-MRJP
24100-110-MRJPC
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
TERMI
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
RJ
RJ
RJ
RJ
110
110
110
110
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
25 PAIR
50 PAIR
100 PAIR
Dimensions (height x width x depth)
8" x 14.5" x 4" (20.3 cm x 36.8 cm x 10.2 cm)
12" x 16.5" x 4" (30.5 cm x 41.9 cm x 10.2 cm)
12" x 16.5" x 4" (30.5 cm x 41.9 cm x 10.2. cm)
7 lbs.
12 lbs.
12 lbs.
SPECIFICATIONS (5-PIN): (110 TERMINATION)
Pair Count
Dimensions (height x width x depth)
Weight (approx.)*
25 PAIR
6.75" x 14.5" x 6" (17.1 cm x 37 cm x 15.5 cm)
50 PAIR
6.75" x 14.5" x 6" (17.1 cm x 37 cm x 15.5 cm)
100 PAIR 10.75" x 14.5" x 6"(27.3 cm x 37 cm x 15.5 cm)
13 lbs.
15 lbs.
16 lbs.
* Weight - Add approx 0.5 oz per installed module.
BET MODEL NUMBER DESIGNATION KEY
24/25/26 = BET SERIES
M = FIVE PIN
110 or 66 = TERMINATION
F = SINGLE PIN
25/50/100 = PAIR COUNT
RJ = RJ21 RECEPTACLE
ST = 25 FT. CABLE STUBBED
C = COVER
P = FACTORY INSTALLED PROTECTORS
13
Weight (approx.)*
CUSTOMIZED CONFIGURATIONS AVAILABLE (MS2 OR 710 TERMINATIONS).
CONTACT CUSTOMER SERVICE AT: 1-800-937-6782.
11 0 T E R M I N AT I O N
24100-110-F110PC
50 PAIR ORDERING INFORMATION
25 PAIR ORDERING INFORMATION
MODEL NUMBER
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
MODEL NUMBER
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
24025-110-F110
24025-110-F110C
24025-110-F110P
24025-110-F110PC
24025-110-FRJ
24025-110-FRJC
24025-110-FRJP
24025-110-FRJPC
24025-110-M110
24025-110-M110C
24025-110-M110P
24025-110-M110PC
24025-110-MRJ
24025-110-MRJC
24025-110-MRJP
24025-110-MRJPC
PAIR
COUNT
24050-110-F110
24050-110-F110C
24050-110-F110P
24050-110-F110PC
24050-110-FRJ
24050-110-FRJC
24050-110-FRJP
24050-110-FRJPC
24050-110-M110
24050-110-M110C
24050-110-M110P
24050-110-M110PC
24050-110-MRJ
24050-110-MRJC
24050-110-MRJP
24050-110-MRJPC
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
110
110
110
110
RJ
RJ
RJ
RJ
110
110
110
110
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
All Specifications Subject to Change Without Notice
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
PAIR
COUNT
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
RJ
RJ
RJ
RJ
110
110
110
110
RJ
RJ
RJ
RJ
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
FIVE
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
14
Series 25 Building Entrance Terminals
(Available with Factory Installed & Tested Gas Tube, DELTA, or Solid State Protectors. See pages 7 & 8)
6 6 & 11 0 T E R M I N AT I O N
25050-110-M110C (COVER NOT SHOWN)
25025-66-M66C (COVER NOT SHOWN)
66 & 110 ORDERING INFORMATION
MODEL NUMBER
PAIR
COUNT
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
25100-110-M110C 100
25100-110-M110PC 100
110
110
110
110
FIVE
FIVE
NO
YES
YES
YES
25100-66-M66C
25100-66-M66PC
100
100
66
66
66
66
FIVE
FIVE
NO
YES
YES
YES
25050-110-M110C 50
25050-110-M110PC 50
110
110
110
110
FIVE
FIVE
NO
YES
YES
YES
25050-66-M66C
25050-66-M66PC
50
50
66
66
66
66
FIVE
FIVE
NO
YES
YES
YES
25025-110-M110C 25
25025-110-M110PC 25
110
110
110
110
FIVE
FIVE
NO
YES
YES
YES
25025-66-M66C
25025-66-M66PC
66
66
66
66
FIVE
FIVE
NO
YES
YES
YES
25100-66-M66C
SPECIFICATIONS: (66 & 110 TERMINATION)
Pair Count
Dimensions (height x width x depth)
Weight (approx.)
25 PAIR
8" x 9.75" x 4.6" (20.3 cm x 24.8 cm x 11.7 cm)
50 PAIR
11" x 9.75" x 4.6" (27.9 cm x 24.8 cm x 11.7 cm)
100 PAIR 13.5" x 13.5" x 4.6"(34.3 cm x 34.3 cm x 11.7 cm)
* Weight - Add approx 0.5 oz per installed module.
15
7 lbs.
9 lbs.
12 lbs.
25
25
STANDARD STUB LENGTH — 25 FT. FOR CUSTOMIZED STUB LENGTHS CONTACT:
CUSTOMER SERVICE AT: (800) 937-6782.
STUB INPUT (26 GAUGE)
25100-ST-M110C (COVER & MODULES NOT SHOWN)
STUBBED ORDERING INFORMATION
MODEL NUMBER
PAIR
COUNT
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
25100-ST-M110C 100
25100-ST-M110PC 100
ST
ST
110
110
FIVE
FIVE
NO
YES
YES
YES
25100-ST-M66C
25100-ST-M66PC
100
100
ST
ST
66
66
FIVE
FIVE
NO
YES
YES
YES
25050-ST-M110C 50
25050-ST-M110PC 50
ST
ST
110
110
FIVE
FIVE
NO
YES
YES
YES
25050-ST-M66C
25050-ST-M66PC
50
50
ST
ST
66
66
FIVE
FIVE
NO
YES
YES
YES
25025-ST-M110C 25
25025-ST-M110PC 25
ST
ST
110
110
FIVE
FIVE
NO
YES
YES
YES
25025-ST-M66C
25025-ST-M66PC
ST
ST
66
66
FIVE
FIVE
NO
YES
YES
YES
25
25
25100-ST-M66C
BET MODEL NUMBER DESIGNATION KEY
SPECIFICATIONS: (STUB INPUT)
Pair Count
Dimensions (height x width x depth)
Weight (approx.)*
25 PAIR
8" x 9.75" x 6.56"(20.3 cm x 24.8 cm x 166.7 cm)
50 PAIR
8" x 9.75" x 6.56" (20.3 cm x 24.8 cm x 16.7 cm)
100 PAIR 10.75" x 12.5" x 6.56" (27.3 cm x 31.8 cm x 16.7 cm)
* Weight - Add approx 0.5 oz per installed module.
All Specifications Subject to Change Without Notice
17 lbs.
21 lbs.
27 lbs.
24/25/26 = BET SERIES
M = FIVE PIN
110 or 66 = TERMINATION
F = SINGLE PIN
25/50/100 = PAIR COUNT
RJ = RJ21 RECEPTACLE
ST = 25 FT. CABLE STUBBED
C = COVER
P = FACTORY INSTALLED PROTECTORS
16
Series 26 Building Entrance Terminals
(Available with Factory Installed & Tested Gas Tube, DELTA, or Solid State Protectors. See pages 7 & 8)
STUB INPUT (26 GAUGE CABLE) & STUB OUTPUT (24 GAUGE CABLE)
26025-ST-MST
26100-ST-MST
26050-ST-MST
SPECIFICATIONS: (STUB INPUT & OUTPUT)
Pair Count
25 PAIR
50 PAIR
100 PAIR
Dimensions (height x width x depth)
Weight (approx.)*
8" x 4" x 3.72" (20.3 cm x 10.16 cm x 9.5 cm)
13" x 4" x 3.72" (33.1 cm x 10.16 cm x 9.5 cm)
23" x 4" x 3.72" (61.0 cm x 10.16 cm x 9.5 cm)
7 lbs.
9 lbs.
12 lbs.
* Weight - Add approx 0.5 oz per installed module.
STUBBED ORDERING INFORMATION
BET MODEL NUMBER DESIGNATION KEY
24/25/26 = BET SERIES
M = FIVE PIN
110 or 66 = TERMINATION
F = SINGLE PIN
25/50/100 = PAIR COUNT
RJ = RJ21 RECEPTACLE
ST = 25 FT. CABLE STUBBED
C = COVER
MODEL NUMBER
PAIR
COUNT
TERM
PIN
PROTECTORS COVER
INPUT OUTPUT CONFIGURATION INSTALLED
26100-ST-MST
26100-ST-MSTP
100
100
ST
ST
ST
ST
FIVE
FIVE
NO
YES
NO
NO
26050-ST-MST
26050-ST-MSTP
50
50
ST
ST
ST
ST
FIVE
FIVE
NO
YES
NO
NO
26025-ST-MST
26025-ST-MSTP
25
25
ST
ST
ST
ST
FIVE
FIVE
NO
YES
NO
NO
P = FACTORY INSTALLED PROTECTORS
17
C A T E G O R Y
6
P R O T E C T I O N
P R O D U C T S
606 Protector Packs
FOR PROTECTION OF DATA NETWORK EQUIPMENT, WORKSTATIONS, ROUTERS, SWITCHES,
•
Building Entrance Protection that maintains
CAT 6 performance
UL 497, UL 497A, & UL 497B Listed for
Primary, Secondary, and Isolated Loop
Circuit Protection
•
•
Ultra low capacitance solid state technology
provides protection transparent to
frequencies up to 250 MHz
•
Factory loaded with 18V, 27V or 65V Solid
State modules
•
Ideal for Power Over Ethernet (PoE) circuit
protection using the 65 volt module
•
110 Termination
•
Cover included
606-27 W/O
COVER
ORDERING INFORMATION: 606 PROTECTOR PACKS
PAIRS TERM.
18V
27V
65V
4
DIMENSIONS:
606-18
606-27
606-65
LVP6-27
LVP6-65
REPLACEMENT MODULES
H x W x D (Approx.)
4.75” x 2.88” x 3.38”
(with cover)
110
(12.1 cm x 7.3 cm x 8.6 cm)
All Specifications Subject to Change Without Notice
LVP6-18
18
C A T E G O R Y
5 E
P R O T E C T I O N
P R O D U C T S
505E Protector Packs
FOR PROTECTION OF DATA NETWORK EQUIPMENT—ROUTERS, SWITCHES, HUBS.
• Ultra low capacitance Solid State technology
provides protection transparent to frequencies up
to 100 MHz for CAT 5E performance
• UL 497, UL 497A, and UL 497B Listed for Primary,
Secondary, and Isolated Loop Circuit Protection.
• Mounts directly on DIN rail or may be mounted on
industry standard 89 style standoff bracket for wire
management
• Style 89 Standoff brackets included with 12, 24 and 32 pair
• DIN rail mounting bracket included with 4 and 8 pair
• 110 Termination
• Covers included
• Designed for use in an enclosure
• Available factory loaded with 7.5V, 18V, 27V or 65V
Solid State modules.
• 4 pair modular design allows for easy custom
configuration
505E32-27
DIMENSIONS:
Pair Count
505E12-27
(COVERS NOT SHOWN)
H x W x D (Approx.)
4 PAIR
w/o DIN rail
1.3” x 3.9” x 3.5”
(3.3 cm x 9.9 cm x 8.9 cm)
4 PAIR
w/DIN rail
4.4" x 3.9" x 3.5"
(11.2 cm x 9.9 cm x 8.9 cm)
8 PAIR
w/DIN rail
4.4" x 3.9" x 3.5"
(11.2 cm x 9.9 cm x 8.9 cm)
12 PAIR
w/89E Bracket
24 & 32 PAIR
w/89D Bracket
ORDERING INFORMATION: 505E PROTECTOR PACKS
PAIRS
TERM.
MOUNTING
7.5V
18V
27V
65V
4
110
DIN rail
505E4-7.5
505E4-18
505E4-27
505E4-65
8
110
DIN rail
505E8-7.5
505E8-18
505E8-27
505E8-65
5.0" x 3.9" x 4.9"
(12.7 cm x 9.9 cm x 12.5 cm)
12
110
505E12-7.5
505E12-18
505E12-27
505E12-65
10.5" x 3.9" x 4.9"
(26.7 cm x 9.9 cm x 12.5 cm)
24
110
89E Standoff
Bracket
89D Standoff
Bracket
505E24-7.5
505E24-18
505E24-27
505E24-65
32
110
505E32-7.5
505E32-18
505E32-27
505E32-65
89D Standoff
Bracket
1504 Protector Packs
ORDERING INFORMATION: 1504 CAT 5E PROTECTOR PACKS
NO OF
TERM.
PROTECTORS
7.5V
18V
27V
65V
4
110
1504PX24LVP7.5E
1504PX24LVP18E
1504PX24LVP27E
1504PX24LVP65E
8
110
1504PX28LVP7.5E
1504PX28LVP18E
1504PX28LVP27E
1504PX28LVP65E
7.5V
18V
27V
65V
1504PXACLVP7.5E
1504PXACLVP18E
WITH AC PROTECTION
NO OF
TERM.
PROTECTORS
4
1504PX28LVP27E
19
110
1504PXACLVP27E 1504PXACLVP65E
General Application Protector Packs, 1-Pin Style
General Application 504, 505, and 581 Protector Packs
FOR TERMINATION AND PROTECTION OF DIGITAL AND ANALOG TELEPHONE SYSTEMS.
• The units can be cascaded to accommodate immediate system
requirements as well as future growth.
• Protector Packs feature a sturdy, flame-retardant housing and are factory
loaded with 6, 10, 12, or 25 gas tube, DELTA, or solid state protectors.
ORDERING INFORMATION: 504 PROTECTOR PACKS
NUMBER TERM.
OF
PROTECTORS
6
66
10
66
6
110
10
110
FACTORY INSTALLED PROTECTORS
BLOCK
ONLY
GAS TUBE
230V
504PX2
1504PX2
DELTA
75V
DELTA
230V
DELTA
350V
SOLID STATE
240V
504PX26GT
504PX26D75
504PX26D
504PX26D350
504PX26SS
504PX210GT
504PX210D75
504PX210D
504PX210D350
504PX210SS
1504PX26GT
1504PX26D75
1504PX26D
1504PX26D350
1504PX26SS
1504PX210GT
1504PX210D75 1504PX210D 1504PX210D350 1504PX210SS
505P12SS
ORDERING INFORMATION: 505 PROTECTOR PACKS
NUMBER TERM.
OF
PROTECTORS
FACTORY INSTALLED PROTECTORS
BLOCK
ONLY
GAS TUBE
230V
DELTA
75V
DELTA
230V
DELTA
350V
SOLID STATE
240V
6
110
505P8
505P6GT
505P6D75
505P6D
505P6D350
505P6SS
12
110
505P12
505P12GT
505P12D75
505P12D
505P12D350
505P12SS
1581P225SS
504PX210SS
ORDERING INFORMATION: 581 PROTECTOR PACKS
NUMBER TERM.
OF
PROTECTORS
FACTORY INSTALLED PROTECTORS
DIMENSIONS:
BLOCK
ONLY
GAS TUBE
230V
DELTA
75V
DELTA
230V
DELTA
350V
SOLID STATE
240V
25
66
581P2
581P225GT
581P225D75
581P225D
581P225D350
581P225SS
25
110
1581P2
1581P225GT
1581P225D75
1581P225D
1581P225D350
1581P225SS
Model #
Dimensions (height x width x depth)
504 & 1504
505P6
505P12
581 & 1581
5" x 4" x 3.5" (12.7 cm x 10.2 cm x 8.9 cm)
4.4" x 3.9" x 3.5" (11.2 cm x 9.9 cm x 8.9 cm)
5" x 3.9" x 4.9" (12.7 cm x 9.9 cm x 12.5 cm)
10" x 3.5" x 3" (25.4 cm x 8.9 cm x 7.6 cm)
Six-Plus—General Application with AC Line Protection
FOR
TERMINATION AND PROTECTION OF COMMUNICATIONS EQUIPMENT, CABLED TO EXTERNAL TELEPHONE LINES AND
SOURCES, INCLUDING
PBXS, KSUS, FAX
AC
POWER
MACHINES, MODEMS AND COMPUTERS.
• Six-line capacity device providing AC and line protection in a single unit.
• Protects against, surges, sneak currents and electrostatic discharge,
while providing EMI/RFI noise reduction and isolation on the AC circuit.
• Common grounding point eliminates ground potential difference that
exists when AC and telephone lines are protected separately. Simply plug
in your PBX (<15 amp) or KSU into the Six-Plus and terminate
the telephone lines.
• Available with gas tube, high-speed DELTA or solid state protectors.
• Accommodates up to six voice/data lines. Capacity may be expanded
by cascading 6, 10, or 25 pair Porta Protector Packs with the Six-Plus.
1504PXACSS
ORDERING INFORMATION: Six-Plus
NUMBER TERM.
OF
PROTECTORS
FACTORY INSTALLED PROTECTORS
DIMENSIONS:
BLOCK
ONLY
Gas Tube
230V
DELTA
75V
DELTA
230V
DELTA
350V
SOLID STATE
240V
Model #
Dimensions (height x width x depth)
504PXACD
504PXACD350
504PXACSS
504AC & 1504AC
5" x 4" x 3.5" (12.7 cm x 10.2 cm x 8.9 cm)
6
66
504PXAC
504PXACGT
504PXACD75
6
110 1504PXAC
1504PXACGT
1504PXACD75 1504PXACD
All Specifications Subject to Change Without Notice
1504PXACD350 1504PXACSS
20
G E N E R A L
A P P L I C A T I O N
P R O T E C T O R
P A C K S ,
5 - P I N
5-Pin Building Entrance Protectors
FOR PROTECTION OF DIGITAL AND ANALOG TELEPHONE SYSTEMS.
•
•
•
•
UL 497 Listed for Primary Protection.
Utilizes industry standard 5-Pin protector modules.
Compact, lightweight design.
66 or 110 IDC termination input and output.
• High-impact, fire-retardant housing.
• Units can be cascaded to provide for expansion
• Can be mounted to 89 style stand-off brackets.
(Model 525 and 1525 only)
Model 506 & 1506 - 6 Pair Building Entrance Protector
ORDERING INFORMATION:
PAIRS
TERM.
BLOCK
ONLY
230V GAS TUBE
PROTECTORS
240V SOLID STATE
PROTECTORS
230V DELTA
PROTECTORS
75V DELTA
PROTECTORS
6
66
506
506GT
506SS
506D
506D75
6
110
1506
1506GT
1506SS
1506D
1506D75
DIMENSIONS:
Model #
506
1506
Dimensions (height x width x depth)
4" x 4.6" x 3.3"
3.75" x 4" x 3.3"
(10 cm x 11.7 cm x 8.2 cm)
(9.5 cm x 10 cm x 8.2 cm)
506
1506
Model 512 & 1512 - 12 Pair Building Entrance Protector
ORDERING INFORMATION:
PAIRS
TERM.
BLOCK
ONLY
230V GAS TUBE
PROTECTORS
240V SOLID STATE
PROTECTORS
230V DELTA
PROTECTORS
75V DELTA
PROTECTORS
12
66
512
512GT
512SS
512D
512D75
12
110
1512
1512GT
1512SS
1512D
1512D75
DIMENSIONS:
Model #
512
1512
Dimensions (height x width x depth)
5.6" x 3.75" x 3.3" (14.2 cm x 9.5 cm x 8.2 cm)
3.75" x 5.6" x 3.3" (9.5 cm x 14.2 cm x 8.2 cm)
1512
512
21
G E N E R A L
A P P L I C A T I O N
P R O T E C T O R
P A C K S ,
5 - P I N
5-Pin Building Entrance Protectors (cont'd)
Model 525 & 1525 - 25 Pair Building Entrance Protector
ORDERING INFORMATION:
PAIRS
TERM.
BLOCK
ONLY
230V GAS TUBE
PROTECTORS
240V SOLID STATE
PROTECTORS
230V DELTA
PROTECTORS
75V DELTA
PROTECTORS
25
66
525
525GT
525SS
525D
525D75
25
110
1525
1525GT
1525SS
1525D
1525D75
DIMENSIONS:
Model #
525 & 1525
Dimensions (height x width x depth)
10" x 3.4" x 3.5" (25.4 cm x 11.7 cm x 8.2 cm)
525
All Specifications Subject to Change Without Notice
1525
22
SECONDARY PROTECTION
PRODUCTS
OMEGA PROTECTOR BLOCKS
• Dependable Secondary Protection to stop surges
that make it past the Primary protector
• An added level of protection after the primary protector,
when the primary protection may not be sufficient
• UL 497 and UL 497A Listed for Primary and
Secondary Protection
ORDERING INFORMATION:
OMEGA PROTECTOR BLOCKS
DC Breakdown
66
110
110
• UL 497B Listed for Isolated Loop Circuit Protection
Pair
Model
240
240
240
25
12
25
581P225M240
505P12M240
1581P225M240
REPLACEMENT MODULES
240V
• Solid State devices for overvoltage protection
• Fuse elements for overcurrent protection
15SCSN-240
1581P225M240
Series 575 Sneak Fuse Assembly
•
•
•
•
•
Dependable sneak current protection for up to 25 lines.
Protects against fire causing current overloads in walls and floors.
Protects personnel, property, electronic equipment.
Sturdy, UL 94-V0 fire retardant housing
UL 497A Listed—Secondary protection
ORDERING INFORMATION: 575 SNEAK FUSE ASSEMBLY
CABLE SIDE
TERMINATION
MODEL
575-4UL
575-5UL
EQUIPMENT SIDE
TERMINATION
575-1UL
66
RJ21 Female
575-2UL
66
66 with Network Disconnect RJ21
575-3UL
66
RJ21 Male
575-4UL
RJ21 Male
RJ21 Female
575-5UL
25AUL
POWER
66
SNEAK FUSE REPLACEMENT PROTECTOR
FAIL TRANSFER
66
UNIT
578 Linebacker
PROVIDES
EMERGENCY TELEPHONE SERVICE IN THE EVENT OF A POWER OUTAGE
OR
• Automatically activates, connecting eight pre-assigned “critical use”
phone lines directly to Central Office trunks.
• Automatically returns circuits to PBX/KSU when power is restored.
• A practical alternative to Uninterruptible Power Supplies.
• Installs in less than 10 minutes.
• Compatible with digital key systems.
• Can be cascaded to increase the number of critical use phone lines.
ORDERING INFORMATION: 578 LINEBACKE
MODEL
578PFTU
DESCRIPTION
8 circuit equipped with both 66 and RJ21 termination can be wired for
either automatic loop-start or ground-start capability
23
D I S T R I B U T I O N
F R A M E
E Q U I P M E N T
Model 88 Terminal Block Family - Front Facing General Purpose, High Density
88
EQUIPMENT TERMINAL BLOCKS ARE USED TO TERMINATE THE EXCHANGE EQUIPMENT PAIRS ON THE HORIZONTAL SIDE OF A
CONVENTIONAL MAIN DISTRIBUTION FRAME (MDF), AND PROVIDE THE CROSS-CONNECT FIELD FOR JUMPERING TO THE OUTSIDE PLANT
(OSP) VERTICAL SIDE OF THE FRAME FOR PROTECTION OF TELEPHONE SYSTEMS.
• 8" block accommodates most conventional
horizontal frame mounting configurations
• Bifurcated wire wrap pins for the cross-connect
field are available as "88B"
• Hinged connection field facilitates easy termination
of equipment pairs
• Ample designation areas on both front and back of
cover
• 8 mounting holes allow mounting on most any
conventional frame
• Wire Wrap terminations for equipment (input) and
cross- connect (output) as per Telcordia specifications
• RJ21 inputs on "C" models (88/96C, etc)
• Face of the block is set at an angle to allow easy
termination with wire wrap gun
• Designation label included
Model 88 Terminal Block
ORDERING INFORMATION:
Model
Pair Count
Input
Output
88/96
88/100
88/128
88/150
88/192
88/200
88/256
88B/96
88B/100
88B/128
96
100
128
150
192
200
256
96
100
128
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Bifurcated Wire Wrap
Bifurcated Wire Wrap
Bifurcated Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
Wire Wrap
88 TERMINAL BLOCK
DIMENSIONS:
Pair Count
96-256
Dimensions (height x width x depth)
4.1" x 7.04" x 3.5" (10.4 cm x 17.9 cm x 8.9 cm)
Weight
3.3 lbs
Model 88/C Terminal Block
ORDERING INFORMATION:
Model
Pair Count
Input
Output
88/96C
96
32-Pair RJ21 (Female)
Wire Wrap
88/100C
100
25-Pair RJ21 (Female)
Wire Wrap
88/128C
128
32-Pair RJ21 (Female)
Wire Wrap
88/150C
150
25-Pair RJ21 (Female)
Wire Wrap
88/192C
192
32-Pair RJ21 (Female)
Wire Wrap
88/200C
200
25-Pair RJ21 (Female)
Wire Wrap
88/256C*
256
32-Pair RJ21 (Female)
Wire Wrap
88B/96C
96
32-Pair RJ21 (Female)
Bifurcated Wire Wrap
88B/100C
100
25-Pair RJ21 (Female)
Bifurcated Wire Wrap
88B/128C
96
32-Pair RJ21 (Female)
Bifurcated Wire Wrap
*This special 256-pair version is the highest density available in the market. It is also CAT5 compliant
for superior transmission of DSL signals and other high frequency circuits.
88/256C
DIMENSIONS:
Pair Count
96-256
88/C TERMINAL BLOCK
Dimensions (height x width x depth)
7.94" x 3.5" x 8.16" (20.2 cm x 8.9 cm x 20.7 cm)
All Specifications Subject to Change Without Notice
Weight
3.8 lbs
24
C E N T R A L
O F F I C E
P R O T E C T O R
B L O C K
P399 100-Pair Protector Block
PROTECTS PERSONNEL AND VALUABLE EQUIPMENT FROM DAMAGING ELECTRICAL SURGES THAT MAY GET ONTO INCOMING CABLE
LINES. MOUNTS ON CONVENTIONAL CENTRAL OFFICE FRAMES WITH
8
INCH CENTER LINES.
FEATURES:
• 100-pair front facing test field
• Compact design saves space and increases
number of protected pairs per frame vertical
• Accepts industry standard 5-pin protector
modules
• Gold plated protector module sockets and test
field contacts offer superior electrical contact,
minimizing noise problems
• Front ground test point offers labor savings and
reliability
• Fanning strips allow easy wire management for
both field stubbing and cross connection to
horizontal blocks bracket
• Cross connect field available with Wire Wrap
(WW) or bifurcated Quick Clip (QC)
• Custom swivel stub
• Operating Temperature: -13˚F to 149˚F
(-25˚C to 65˚C)
ORDERING INFORMATION: P399
MODEL#
P399-WW
P399-WW-24x25
P399-WW-24x50
P399-WW-24x75
P399-WW-24x100
P399-WW-22x25
P399-WW-22x50
P399-WW-22x75
P399-WW-22x100
P399-QC
P399-QC-24x25
P399-QC-24x50
P399-QC-24x75
P399-QC-24x100
P399-QC-22x25
P399-QC-22x50
P399-QC-22x75
P399-QC-22x100
25
Termination
Factory Stubbed
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Wire-Wrap
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
Quick-Clip
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Cable
None
25 feet of 24 AWG
50 feet of 24 AWG
75 feet of 24 AWG
100 feet of 24 AWG
25 feet of 22 AWG
50 feet of 22 AWG
75 feet of 22 AWG
100 feet of 22 AWG
None
25 feet of 24 AWG
50 feet of 24 AWG
75 feet of 24 AWG
100 feet of 24 AWG
25 feet of 22 AWG
50 feet of 22 AWG
75 feet of 22 AWG
100 feet of 22 AWG
C E N T R A L
O F F I C E
P R O T E C T O R
B L O C K
P399 100-Protector Block (cont'd)
THE P399 IS A COMPACT
100-PAIR
CONNECTOR THAT UTILIZES INDUSTRY STANDARD
5-PIN
PROTECTOR MOD-
8.5"
7.5"
4.5." MAX
DIMENSIONS:
H x W x D (Approx.)
8.5” x 4.5” x 7.5”
8.5"
(21.6 cm x 11.4 cm x 19.1 cm)
All Specifications Subject to Change Without Notice
26
HIGH
PAIR
COUNT
PROTECTION
&
DISTRIBUTION
Series 28 XLBET - Distribution Frame
FEATURES:
• UL listed for Primary Protection.
• Can be installed on industry standard 23" x 6" deep
relay rack.
• 1800-pair with cross connect field can be mounted
on a 7 ft. rack.
• 2400-pair without the cross connect field mounts
on 7 ft. rack.
• Includes all mounting hardware and wire
management guides.
• External, front mounted grounding lugs allows for
"daisy chaining" the units together on frame.
• Separate cross connect field (110 or other) can be
mounted on the output side of the rack.
• Compatible with all industry standard 5-pin style
protector modules.
.
Back
Front
28 EXTRA LARGE BET (XLBET) IS A HIGH-DENSITY RACK MOUNTED PROTECTED SOLUTION. THE XLBET MOUNTS ON A
23" RACK PROVIDING PROTECTION FOR 1800 PAIRS WITH CROSS CONNECT FIELDS OR 2400 PAIRS WITHOUT CROSS CONNECT FIELDS. RJ21 CONNECTORS ALLOW FOR EASY CABLING TO TELEPHONY EQUIPMENT. THE FRONT SIDE OF THE RACK PROVIDES
CROSS CONNECTION BETWEEN THE XLBETS AND EQUIPMENT CABLING.
THE SERIES
STANDARD
THE XLBET UTILIZES INDUSTRY STANDARD
5-PIN
PROTECTOR MODULES.
ORDERING INFORMATION: SERIES 28 XLBET
MODEL#
PAIRS
INPUT
OUTPUT
28300-ST-MRJF
28300-ST-M110U*
12RJ110MU*
24RJ110MU*
12RJ110F
300
300
300
600
300
Three 100 pair 26' guage 25 ft. Cables
Three 100 pair 26' guage 25 ft. Cables
12 Cables w/Male RJ tails
24 Cables w/Male RJ tails
12 Cables w/Female RJ tails
12 Cables w/Female RJ tails
300-pair 110 connection block
300-pair 110 connection block
Two 300-pair 110 connection blocks
300-pair 110 connection block
UWMB110
RJEQ
N/A
600
*Any model numbers ending in the letter "U", includes UWMB110
27
Mounting Bracket for two 300 pair 110 connection blocks with wire guides
RJ21 Connector Plate
HIGH
PAIR
COUNT
PROTECTION
&
DISTRIBUTION
Series 28 XLBET - Mechanical Specifications for each 300 Pair BET
•
•
•
•
•
•
•
•
•
Construction-16 gauge steel, durable finish
Input Stubbing- Three, 100-Pair, 25 foot, 26 AWG riser/plenum rated cables provides integrated fusible link
Output-110 Terminal Blocks (connected to BET via RJ21 connectors)
Twelve 25 pair 24 AWG output cables connectorized with female RJ21 connectors
25-Pair RJ21 connectorized output stubs connect easily with cross connect blocks
Output stubs can be made to custom cable lengths for direct equipment cabling
Custom stub lengths available
5 U Space on 23” Rack per 300-Pairs. Up to 2400 pair on one rack (1800 with cross connects)
Large ground lug for easy connection of all units with facilities ground points
24"
24.00
PAIRS 101-200
PAIRS 201-300
8.56"
4.69"
PAIRS 1-100
8.56
251-275
201-225
276-300
226-250
151-175
176-200
101-125
51-75
1-25
126-150
76-100
26-50
Front View
Back View
Top View
Side View
4.69
Porta Systems offers a wide range of Main Distribution
Frame products. For ordering, installation, and
engineering information please contact a Technical
Support Manager at: 1-800-937-6782.
All Specifications Subject to Change Without Notice
28
COMPETITOR
PRODUCT
REFERENCE
Functional Equivalents for
Porta Systems
Solution
CommScope
(Systimax)
(Marconi)
506
-
2606QC/QC
-
506GT
-
2606QC/QC (w/3B1E)
-
1880110/US-6
-
1506
110ANA1-06
1506GT
Building
Entrance
Protectors
Emerson
Circa
1880110/US-6 (w/3B1E)
512
-
2612QC/QC
-
512GT
-
2612QC/QC (w/3B1E)
-
1512
-
-
-
1512GT
-
-
-
525
-
2625QC/QC
R66P25
525GT
-
2625QC/QC (w/3B1E)
R66P25
(w/3B1E)
1525
Protector
Modules
110ANA1-25
-
-
1525GT 110ANA1-25 (w/3B1E)
-
-
75BCXN-230
3B1E (Single Pin)
3B1E (Single Pin) 3B1E (Single Pin)
95BCXN-230
4B1E (Single Pin)
4B1E (Single Pin) 4B1E (Single Pin)
15SCN-240
4B1S (Single Pin)
4B1S (Single Pin) 4B1S (Single Pin)
175BCXN-230
3B1F
C3B1E
R3B1E
175BCXN-400
3B1EW
C3B1E
R3B1E
195BCXN-230
4B1F
C4B1E
R4B1E
195BCXN-400
4B1EW
C4B1E
R4B1E
105SCN-75
606
Protector
Packs
29
C3B1S-75
-
3B1FS
C3B1FS
R3B1FS
105SCN-300
3B1S
C3B1S
R3B1S
115SCN-75
4B1FS-75
C4B1S-75 (PTC)
115SCN-240
4B1FS
C4B1FS (PTC)
115SCN-300
4B1S
C4B1S (PTC)
115SCNHDSL-230
4C1FS
C3B1FS-BAL
-
C3B1S-30
-
MLVP27
505E
Protector
Packs
-
105SCN-240
-
505E4-18
505E8-18
Cross with
505E12-18
Systimax 108224774
505E32-18
Cross with ITW Linx and
Panamax LAN5E
protectors
R4B1FS
R4B1S
-
606-18
760028373
Cross with ITW Linx
-
606-27
760033951
and Panamax
-
606-65
190A1-100
LAN6 Protectors
-
COMPETITOR
PRODUCT
REFERENCE
Functional Equivalents for
Porta Systems
Building Entrance Terminal
(BET) Solution
26100-ST-MST
100
Pair
Count
50
25
CommScope
(Systimax)
Circa
190A1-100
1900A1-100
Emerson
(Marconi)
-
25100-110-M110C
-
1880ENA1/NSC-100G
BEPNCT100T
25100-66-M66C
-
1890ECT1/NSC-100
BEPNCC100C
1880B1-100
BEPT100SC25
25100-ST-M110C
489ACC1-100
25100-ST-M66C
489BCC1-100
26100-ST-MST
190A1-100
1900A1-100
R13410012
24100-110-M110C
489ACA1-100
1880ECA1-100G
BEPT100T
24100-66-M66C
489BCB1-100
1890BC1-100 BEPC100SC25
1890ECT1-100
BEPC100C
25050-110-M110C
-
1880ENA/NSC-50G
BEPNCT50T
25050-66-M66C
-
1890ECT1/NSC-50
BEPNCC50C
25050-ST-M110C
489ACC1-050
1880B1-50
BEPT50SC25
25050-ST-M66C
489BCC1-050
1890BC1-50
BEPC50SC25
26050-ST-MST
190A1-50
24050-110-M110C
489ACA1-050
1880ECA1-50G
-
BEPT50T
R134506
24050-66-M66C
489BCB1-050
1180ECT1-50
BEPC50C
25025-110-M110C
-
1880ENA1/NSC-25G
BEPNCT25T
25025-66-M66C
-
1890ECT/NSC-25
BEPNCC25C
25025-ST-M110C
489ACC1-025
1880B1-25
BEPT25SC25
25025-ST-M66C
489BCC1-025
1890BC1-25
BEPC25SC25
26025-ST-MST
-
-
-
24025-110-M110C
489ACA1-025
1880ECA1-25G
BEPT25T
24025-66-M66C
489BCB1-025
1880ECT1-25
BEPC25C
1. Add a "P" before the "C" of any BET part number to have the BET factory loaded with 230-volt Gas tube protectors
(3B1E equivalents). For Example: 24100-110-M110PC.
2. Add a "PCS" at the end of any BET part number to have the BET factory loaded with Solid State protectors (4B1S
equivalents). For Example: 24100-110-M110PCS.
3. Custom BET configurations and specialty products such as 710 and MS2 inputs and CAT 5E and CAT 6 entrance
protectors are available. Contact Porta Systems customer service or your local manufacturer's representative
for assistance.
All Specifications Subject to Change Without Notice
30
3PEFP%SJWFt&EHFXPPE/:t5t
5PMM'SFFt'tTBMFT!UJJOFUUFDIDPN
Tii Network Technologies, Inc.
REGISTERED TO ISO
9001:2000