For:
Customer Service Contact:
Model Number:
Web support:
Galaxy S® 5
800-473-5422
C03030 Voyager
Rev:
A
pelican.com/mobile
Pages:
1 of 1
email:
csr.warranty@pelican.com
Online support:
Pelican Products Inc.
1.800.473.5422
23215 Early Avenue, Torrance, CA 90505
REMOVAL
1. Begin unlatching the case at the coin slot in the
lower right corner. A coin (pictured) may assist in
releasing.
2. Remove the front cover by pulling up and away
slowly around the edges.
INSTALLATION
1. Place the front cover of the case face down as shown.
4. Place the phone face down onto the screen protector
(home button at bottom should align with the hole on
the screen protector).
2. Peel the protective film from both sides of the screen protector.
5. Place the rear shell of the case over the phone
(the camera/flash on the corner will show through the case).
3. Place the screen protector face down into the front
cover (make sure the top of the screen protector
lines up with the top of the front cover).
6. Snap the case together around the edges so there are
no gaps between the front and rear covers.