Technical Data
Foot-switch
Series F1-EX
-
II 2G
II 2 D
Article number 6096198014
5000
Description F1-SU1Z EX -5M-
Operating
(BK)
(GY)
(BN)
(BU)
Electrical data
Rated insulation voltage
Conv. thermal current
Rated operational voltage
Utilization category
Direct opening action
Short-circuit protective device
Safety class
Ui
Ithe
Ue
p
250 V AC
5A
230 V
AC 15, 240 V / 3 A; DC 13, 250 V / 0,27 A
acc. to IEC / EN 60947-5-1, Annex K (pedal stop)
Fuse 4 A gG (with safety function)
Fuse 6 A gG
II, fully insulated (see Notes)
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-07-17 and will not be removed in case of changes.
Page 1 of 3
6096198014 / 2212-15
Technical Data
Mechanical Data
Enclosure
Cover
Actuator
Ambient air temperature
Maximum surface temperature
Contact type
Operating force
Mechanical life
Mechanical switching frequency
Switching frequency under max. load
Assembly
Connection
Conductor cross-sections
Cable entrance
Weight including cover
Installation position
Protection type of the installed
switch block
AL, die-cast
AL, die-cast
Foot lever (AL, die-cast)
–20°C ... +60°C
+80°C/T6
1 NC, 1 NO (Zb)
≈ 10 N (pedal centre)
2 x 106 switching cycles
≤ 50 / min.
≤ 20 / min. (AC), ≤ 15 / min. (DC)
2 screws M8
Control cable (with wire end ferrules)
4 x 0,75 mm²
1 x cable gland M20x1,5
≈ 1,0 kg
Any, installed in a protected position on the underside of the enclosure
IP 66/IP 67 acc. to IEC/EN 60529
ID for safety engineering
B10d
4 x 106 switching cycles
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
VDE 0170-1, DIN EN 60079-0, IEC 60079-0
VDE 0170-5, DIN EN 60079-1, IEC 60079-1
VDE 0170-15, DIN EN 60079-31, IEC 60079-31
DIN EN ISO 13849-1
Explosion Protection
II 2 G Ex d IIC T6 Gb
II 2 D Ex tb IIIC T80°C Db
EC-Type Examination Certificate
Foot-switch complete
Installed switch block
TÜV 03 ATEX 2043X
TÜV 03 ATEX 2021X
BG-Type Examination Certificate
Installed switch block
GS-ET-15
EU Conformity
acc. to explosion-protection directive 94/9/EC
acc. to machinery directive 2006/42/EC
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-07-17 and will not be removed in case of changes.
Page 2 of 3
6096198014 / 2212-15
Technical Data
Notes
The switching unit must be securely installed.
The cable must be securely laid and protected against mechanical damage.
The metal enclosure of the switch must be earthed if the enclosure can be expected to develop a hazardous charge during
operation.
Other cable lengths on request.
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-07-17 and will not be removed in case of changes.
Page 3 of 3
6096198014 / 2212-15