PROJECT INFORMATION
MILLENIUM™ OVAL
Job Name
Fixture Type
MO13 SERIES – 5 DAY SHIP PROGRAM – LOW PROFILE HOUSING
Catalog Number
Approved by
PRODUCT FEATURES:
»»Surface mount – ceiling or wall mount; 9"W×13"H×4"D
»»Marine grade die-cast aluminum housing and UV-stabilized
polycarbonate lens for durability
»»Peace of Mind Guarantee® against breakage
»»UL certified IP64 per IEC 60598
»»Maximum of 50 per order
FL
EL
SPECIFICATIONS
BASEPLATE: Marine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying.
Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting capabilities – See Installation Detail. Standard black, bronze or white exterior TGIC
polyester powder coat – 5-step pre-treatment.
REFLECTOR: Full reflector/wire cover – 92% reflectivity.
LENS: UV-stabilized, high impact resistant, virgin injection molded polycarbonate. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance mating of
injection molded lens and lens base facilitates set up and installation. Lens and lens base secured with two concealed captive Torx® with center pin fasteners.
LENS BASE/GRILLE: Lens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate.
GASKETING: Die-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens
base, baseplate and optional surface adapter.
HARDWARE: Two stainless steel Torx® with center pin fasteners.
ELECTRICAL: Fluorescent magnetic ballasts – 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10%THD).
WARRANTY: Standard four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.
LISTINGS: UL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. ADA compliant.
5
IP64
Day
ADA
ORDERING INFORMATION (Ex: MO13FL-PP-MB-13Q-1-120-FS)
Model
Lens Type
Finish
Model
MO13EL Eyelid (wall mount only)
MO13FL Full Face
Lens Type
PP Pearlescent Polycarbonate
S
Clear Starburst Polycarbonate
Finish
MB Matte Black
MW Matte White
DB Dark Bronze
Lamp Type
Lamp Qty
Voltage
Lamp Type (Quantity/Ballast/Volt/Starting Temp)
7t 7 Watt Twin (2/MB/120,277/0°F)
13t 13 Watt Twin (1,2/MB/120,277/32°F)
13Q 13 Watt Quad (1/RS/120,277, DV, 347/0°F)
18Q 18 Watt Quad (1/RS/120,277, DV, 347/0°F)
26Q 26 Watt Quad (1/277, DV, 347/0°F)
32P 32 Watt PLT (1/277, DV, 347/0°F)
Lamp Quantity*
1 One Lamp
2 Two Lamps
Voltage*
120 120 Volts
277 277 Volts
347† 347 Volts
DV† 120-277 Volts, electronic ballasts only
www.kenall.com
P: 800-4-Kenall
Options
Accessories
Options
EL Standard Lumen EL Pack with Die-Cast Surface Adapter
(SA) – Non ADA (32 total system watts max)
FS Single Fuse & Holder
Accessories
BPC Photo Control – Shielded Button Type (Requires Surface Adapter)
(120-277V only)
SA Die-Cast Surface Adapter –Non ADA
9500Torx® Screwdriver
* See Lamp Type for availability
t
n/a with 347V
† n/a with BPC
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MO13_L-QS_5DAY-060314
For additional photometry, go to www.kenall.com
MILLENIUM™ OVAL
MO13 SERIES – 5-DAY SHIP PROGRAM – LOW PROFILE HOUSING
DIMENSIONAL DATA
FRONT & SIDE VIEW
SURFACE ADAPTER (SA)
SIDE & BACKVIEW
BACK VIEW
(4) 1/2" NPT 4 sides (Plugged)
(1) 3/4" NPT (Not Plugged)
13.20"
3.80" (FL)
4.00"
(EL, BL, CL)
8.88"
13.22"
7.31"
2.81"
6.60"
FL
6.80"
EL, CL, BL
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
5.75"
Mounting
Plate
3.625"
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MO13_L-QS_5DAY-060314