FINELITE
Select the combination that gives you the light you need
ION
N
A
T
MP
CO NDAN
PE UNT
MO
.
. ..
5
Downlight
Shielding Options
..........
CH FIELD
AN
G
OPT EABL
ICS E
!
..
2
Reflector
Choices
Affordable
Brightness
4
Uplight
Control Options
“Open”
Standard 91White
In an “Open” fixture the
lamps are exposed on the
top side. “Open” fixtures
provide a greater percentage
of uplight than other options.
A12 Diffuser
Acrylic Lens
Stylish Subtle
Brightness
. ...
...........
White side reflectors provide good
basic light distribution - 70/30
.
Extended Performance
Controlled Center Optics
Specular side reflectors enhance
performance.
Gives you 3 fixtures in one!
Perfect for educational market.
Dual switching -55/45, 75/25, 5/95
Perf Shield
White
General
Purpose
Cross Blade
Baffle
2
Lamp
Ballast Systems
White
VDT
Compatible
Parabolic
Louver
Soft Top Optics
Diffuses light into soft rays above and
delivers downlight where needed - 30/70
T8
Semi-Specular
Diffuser
Totally Direct Optics
Tight Control
T5HO
1.5″ Paracube
Diffuser between lamps and shielding
is standard with T5HO lamps.
Semi-Specular
Finelite, Inc.
◊
30500 Whipple Road
◊
Union City, CA 94587-1530
◊
510 / 441-1100
Directs light 100% downwards - 0/100
◊
FAX: 510 / 441-1510
◊
www.finelite.com
Series 10 Wall Mount
today and change it easily in the field tomorrow.
SPACE TRANSITIONS
Change optics easily in the field when you
reconfigure your space. Change your lighting
without ever having to take the fixtures down.
. ...
...........
.
General Office
OPTIONAL MOUNTING BRACKET
Optional mounting bracket
comes in 4′ and 8′ lengths
and has holes at 1″ intervals
for securing to wall studs. Feed
hole is 4.5″ from the end of the
fixture. Fixture hangs 0.5″ from
the wall. Bracket cap covers end
of bracket.
OPTIONAL
1.0″
4.5″
edge to feed hole
Optional
Mounting Bracket
BALLASTS — “Yes” all Standard Ballasts
•
•
•
•
BUILDING 1
Lab
T8 - 1, 2, 3 lamp
T5HO - 1, 2, 3 lamp
All major dimming systems
Full size battery backup units
Training Center
LAMP GUARD
Optional virgin clear acrylic
Lamp Guard fits between T8
lamps and shielding.
STANDARD
MOUNTING
Standard mounting is a surface mount (SUR), that bolts
fixture directly to wall. Fixture is secured at each end
and at each wall stud.
Stud
Stud
x
x
fixture
= Mounting
Locations
x
fixture
OPTIONAL MOUNTING
x = Distance
between
studs
Rack Adjustment
Power
Mounting
Bracket
Optional Mounting Bracket (MB) gives fixture a secure
surface to hang from when walls are uneven. Fixture must
be secured at each end and at every stud. Unique rack
adjustment screw allows side to side leveling.
◊
30500 Whipple Road
Diffuser between lamps and
shielding is standard with
T5HO lamps.
DUST COVER
Optional Dust Cover keeps
fixtures covered and clean.
Shielding
Lamps Dust Cover
NOTE: Lamp Guard and
Dust Cover may be used together.
Shielding
ENDCAPS
Finelite standard flat endcap extends to the wall.
Wall
Finelite, Inc.
Lamps Lamp Guard
◊
Union City, CA 94587-1530
LENGTHS
4′ and 8′ multiples can be joined to make runs as long as
required.
◊
510 / 441-1100
◊
FAX: 510 / 441-1510
◊
www.finelite.com
FINELITE
Series 10 Wall Mount
EXCELLENT PERFORMANCE
OFFICE / CONFERENCE ROOM
CORRIDOR / HALLWAY SERIES 10WM
2 T8 - EP
...........
Suspension (7′0″ AFF)″
6′ WIDTH
. ...
.
Parabolic Louver
75% uplight
25% downlight
Corridor Size
6′ X 30′
6′ X 30′
6′ X 30′
6′ X 30′
12′
.
SERIES
10WM
Perf Shield
90% uplight
10% downlight
Parabolic Louver
75% uplight
25% downlight
30′ LENGTH
Perf Shield
90% uplight
10% downlight
...........
2 T8 - EP
12′
. ...
Ceiling 9′0″
Ceiling
9′0″
Suspension
(7′0″ AFF)
White Cross Blade
75% uplight
25% downlight
White Cross Blade
75% uplight
25% downlight
Reflectances - 80/50/20
Reflectances - 80/50/20
Shielding
Maintained Avg.
Perf Shield
45 fc
Parabolic Louver
50 fc
White Cross Blade
54 fc
Paracube
49 fc
Layout
1 - 28′
1 - 28′
1 - 28′
1 - 28′
# Lamps
Maintained Avg.
Shielding
Turned On
Footcandles
Perf Shield
2 T8
37 fc
White Cross Blade 2 T8
44 fc
Layout
1 - 8′
1 - 8′
SERIES 10 WALL MOUNT
WHITE CROSS BLADE BAFFLE
Scale: 3/4″= 1″
S
eries 10 Wall Mount takes versatility to a whole new
level. Choose a shielding option for any brightness need.
And, no matter which optical package you choose today, you
can change it in the field if your needs change anytime in the
future—you don’t even have to take the fixtures down to do
it! Interchangeable parts snap in and out easily.
Fixtures are easy to install, either bolted directly to the wall,
or using Finelite’s optional mounting bracket.
Steel die-formed, interlocking joiners assure straight rows.
Series 10 Wall Mount redefines “custom lighting” with its
field interchangeable shieldings and optics.
Fixtures are factory pre-tested and all row fixtures are supplied
with pre-installed electrical quick connect mating plugs.
Fixtures can be supplied from the factory pre-lamped, and
every fixture is shipped in a protective plastic sleeve to keep
it clean until project completion.
MOUNTING & JOINT DETAIL
S10WIntro1.ID 4010.06/01
MOUNTING BRACKET
FLAT ENDCAP
PRECISION JOINING
© 2001 FINELITE INC. ALL RIGHTS RESERVED.
Finelite, Inc.
◊
30500 Whipple Road
◊
Union City, CA 94587-1530
◊
510 / 441-1100
◊
FAX: 510 / 441-1510
◊
www.finelite.com