Use product tables for pricing. Some options are found on separate pages at the back of the book. If prices are not shown, contact factory. Note Alera does not quote or manufacture "per plans and specs." Alera is not liable for items or interpretations which may vary from "per plans and specs." MS6 MS6 Features • • Beams • • • Direct/Indirect Rectilinear T8, T5, or T5HO Controls compatible Separate up/down lamp compartments create an efficient and creative optical system Nine different lamp and distribution options provide flexibility for any application • • • Multiple shielding options provide a wide array of glare control levels All steel housing is sturdy yet economical UL listed 1598. cUL or CSA. Damp location listed Ordering Information MS6 – – Model MS6 MS6 – LAMP PROFILE & DISTRIBUTION 1U1D 1-Lamp Uplight, 1-Lamp Downlight1 1U2D 1-Lamp Uplight, 2U1D Row Length 4 4' Single 8 8' Single — Indicate 2U2D 1U1AD 2U1AD row length over 8' in 4' 1AU1D increments Note: Rows over 8' will be 1AU2D configured by Alera. Example: 16' will be (2) 1AU1AD 8'. Alternate configurations: contact factory. LAMP TYPE T5 T52 T5HO T5HO2 T8 T8 – – SUSPENSION LENGTH 48 48" 96 96" Not applicable for surface or wall mount. Other lengths available on request. 2-Lamp Downlight1 2-Lamp Uplight, 1-Lamp Downlight 2-Lamp Uplight, Mounting Method Shielding 2-Lamp Downlight LD Low Iridescent 1-Lamp Uplight, 1-Lamp CM Adjustable Aircraft Cable Semi-Specular Louver Asymmetric Downlight1 LS Low Iridescent Specular 2-Lamp Uplight, 1-Lamp PM Pendant Mount Louver Asymmetric Downlight WM Wall Mount, Symmetric Dist. A12 Pattern 12 Acrylic Lens 1-Lamp Asymmetric Uplight, 1-Lamp WMW Wall Mount, A19 Pattern 19 Acrylic Lens Wall Wash3 Downlight CA Clear Acrylic Lens WMR Wall Mount, 1-Lamp Asymmetric (No pattern) 3 Room Wash Uplight, 2-Lamp Opal Acrylic Lens OA Downlight White Cross Baffle WCB 1-Lamp Asymmetric NA No Shielding Uplight, 1-Lamp Asymmetric Downlight Connector box required on all 1-lamp connector uplight units if pendant or cable mounted. This option does not permit continuous shielding for all 1-lamp symmetric uplights. 2 T5/T5HO at risk for socket shadow in downlight component. 3 For use with asymmetric distributions. 1 – – Voltage Finish U 120V- MW Matte 277V White (Std.) ZT ZET Metallic Silver 120 120V 277 277V 347 347V Ballast E Electronic, Instant Start (Std. for T8) EP Electronic, Programmed Start (Std. for T5 & T5HO, optional for T8) ED Electronic, Dimming (Must specify) Unless specified, Alera will use fewest ballasts possible. Options DC Dust Cover (T8 or T5 only) LR Left/Right UB EL EMC NLC GLR GMF TBAR Switching4 Upper/Lower Switching4 One Emergency Battery Pack5, 6 One Emergency Circuit6, 7 Night Light Circuit 6, 7 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting LR requires 2 lamps in cross section. UB assumes 1 circuit up, 1 circuit down. Specify voltage. For additional, specify quantity before nomenclature (Example: 2EL120). Not available with all configurations; some limitations apply. Contact factory for details. 7 One extra feed drop per row for EMC/NLC. For through wiring, contact factory. 4 5 6 CROSS SECTIONS 6" 7¾" MS6-1U1D6 MS6-1U2D6 MS6-2U1D MS6-1AU1D MS6-1AU2D MS6-1AU1AD MS6-2U2D Name: Test #: Efficiency: LER: MS6-1U1AD6 MS6-2U1AD MS6-1U1DT8-LD-E 10976 68.5% 63 Specifications subject to change without notice.