Assembly Equipment.2015

advertisement
Montageausrüstung
Assembly Equipment
Montage am Kabel / Assembly on the cable
Montage an Freileitungen/ Assembly on overhead lines
Erdungs- und Kurzschließvorrichtungen / Earthing and short circuiting devices
Schneiden / Cutting
Pressen / Press
Zubehör / Accessory
Katalog 2015
maintenance tools
assembly tools
working umbrella
working umbrella, cotton
- brown colored, subdivided into 10 sections
- water-proofed and decomposition repressive impregnated
- 2,50 m cotton fabric ca. 200 g/m² and 3,0 m cotton fabric ca. 300 g/m²
- earthing spike for all umbrella sizes
Description
Material number
working umbrella 2,0 m, brown, cotton
8101000
151,00 €
Price
working umbrella 2,5 m, brown, cotton
8101250
264,00 €
working umbrella 3,0 m, brown, cotton
8101300
309,00 €
earth spike for working umbrella
8101001
34,00 €
working umbrella, PVC
- PVC B1, flame resistant
- white, subdivided into 10 sections
- waterproof
- earthing spike for all umbrella sizes
Description
Material number
working umbrella 2,0 m, white, PVC B1 flame resisant
8111000
131,00 €
working umbrella 2,5 m, white, PVC B1 flame resisant
8111250
252,00 €
working umbrella 3,0 m, white, PVC B1 flame resisant
8111300
370,00 €
earth spike for working umbrella
8101001
34,00 €
www.bsd-dresden.de
Price
Seite 176
tents
cable solder tent with steel tube frame
- on both sides PVC-coated PES-fabric
- ca. 600 g/m², rot resistant
- steel framework 27/2 mm grey painted, foldable
- color white with circulating warning strip
Description
Material number
cable soldering tent L200 x W200 x H200
8102200
731,00 €
Price
cable soldering tent L250 x W250 x H190
8102250
843,00 €
cable soldering tent L300 x W250 x H190
8102300
896,00 €
assembly tent 5-seconds tent
- small, handy, well stowable
- assembling and dismantling in seconds by only one person
- self supportive construction - no loose sticks
- fastness to light for electrical work, installation of fiber-optic cable, maintenance
of telecommunication installations
- won't be heavier through rainfall
- rain-/coldness protection
- simple cleaning with high pressure cleaner
- light and robust solution
- one grey reflective strip for additional safety
- no loose parts, just one bag
- flame-resistant blacket white with yellow brim
The assembly tent be suitable for the different kind of work, for
example at switch- and control boxes, sleeves assembly, for ground- and
conductor work, waste water pumps and inspections, sewer and road
construction work.
The assembly tents are avialable in two standard- basic forms:
tapered roof (TE) and flat roof (KE)
The flat roof type is avialable as cube - and cuboid version in different
measurements
The peaked roof tents have in the back at the standard version an extra zip, which
enables to cover a larger working space by opening und putting on an
additional tent. For the flat roof tents with ca. 1m length the additional zip is
optionally as special function avialable
Description
Material number
assembly tent 5-seconds tent flat roof L180 x W180 x H200
8102140
906,00 €
assembly tent 5-seconds tent peaked roof L180 x W180 x H200
8102181
949,00 €
assembly tent 5-seconds tent flat roof L250 x W180 x H200
8102182
1.130,00 €
assembly tent 5-seconds tent flat roof W210 x L210 x H200
8102210
1.165,00 €
assembly tent 5-seconds tent flat roof L250 x W250 x H200
8102253
1.215,00 €
assembly tent 5-seconds tent peaked roof L180 x W180 x H170
8102180
582,00 €
assembly tent 5-seconds tent peaked roof L250 x W200 x H190
8102252
906,00 €
www.bsd-dresden.de
Price
Seite 177
assembly tent for mini-compact station
- enables to work at mini-compact station also during rainfall
- because it prevents a penetration of wetness to the medium voltage parts
- simple construction, doors will be used as structure
- rear spanning made by tightening ropes with hooks and eyelets
- universal size suitable for stations of the firms Betonbau, Gröber, Scheidt
- on both sides PVC-coated PES-fabric
- ca. 600 g/m², rot resistant
- door- and roof cover in the working area are made of transparent cover
- other sizes are available on request
delivery supply:
1x tent cover with inset out of transparent plastic film
1x tent helping rods, adjustable 2-parts
2x universal-tension clamps
2x metal stick for side weighting
1x storage bag for tent cover
1x storage bag for tent rods
1x manual
Description
Material number
assembly tent for mini-compact station
8102100
www.bsd-dresden.de
Price
757,00 €
Seite 178
mass stove
mass stove
- 8 kW
- gas-cook-heater for heating up of filling mass
- adjustable burner with flame supervision
- Piezo firing
- 1.5 bar propan
- connection G3/8LHa
- incl. filling bucket 15 Ltr.
Description
Material number
mass stove, 8 kW with melting bucket 15 l
8103000
Price
561,00 €
mass bucket 15 liter
- filling bucket 15 Ltr.
- for inserting in mass stove
- with pouring spout
Description
Material number
melting bucket 15 l
8104000
Price
108,00 €
mass bucket 15 ltr. riddle inset
- for boiling of rolls (wrap paper)
- height 15 cm
Description
Material number
riddle inset for mass stove 15 l
8154100
www.bsd-dresden.de
Price
64,00 €
Seite 179
mass thermometer
- temperature range 50°C up to 250 °C
Description
Material number
mass thermometer 50 - 250 °C
8105000
www.bsd-dresden.de
Price
97,00 €
Seite 180
line stretcher clamp
line stretcher clamp
- for alu- or steel/alu cable
- autonomous holding via spring effect
- galvanized
Description
Material number
line stretcher clamp 25 - 35 mm² aluminium/steel
8106040
56,50 €
Price
line stretcher clamp 16 - 70 mm² aluminium/steel
8106041
66,00 €
line stretcher clamp 50 - 150 mm² aluminium/steel
8106042
92,50 €
line stretcher clamp
- for copper- and steel cable
- jaws are hardened and brunished
Description
Material number
line stretcher clamp 1 - 16 mm² copper/steel
8107050
38,00 €
Price
line stretcher clamp 6 - 35 mm² copper/steel
8107051
61,00 €
line stretcher clamp 16 - 70 mm² copper/steel
8107052
68,00 €
line stretcher clamp 50 - 150 mm² copper/steel
8107053
91,50 €
line stretcher clamp
- for insulating overhead lines
- galvanized
- autonomous holding
- 2 x 25 -70 mm²
- diameter 14 - 36 mm
Description
Material number
line stretcher clamp / insulated overhead lines, 4 x 35 - 70 mm²
8108070
www.bsd-dresden.de
Price
184,00 €
Seite 181
ISO line stretcher clamp
- for insulated overhead lines
- jaws out of aluminium-cast
- for conductor bundle of 4 x 25 x 50
- or 4 x 70 x 95 + 35 mm² (street lightling)
Description
Material number
ISO line stretcher clamp 2,2 kg for insulated overhead line
8150028
405,00 €
ISO belt stretcher clamp 4,6 kg for insulated overhead line
8150036
479,00 €
www.bsd-dresden.de
Price
Seite 182
uptake roll
uptake roll with mount bracket
- roller out of alu with brass brushing
- with closed bracket, opening at the side
- with wing nut and strong mount bracket
- galvanized
- roll-diameter 115 mm bzw. 200 mm
Description
Material number
uptake roll up to diameter 16 mm with closed bracked
8110016
82,50 €
Price
uptake roll up to diameter 29 mm with closed bracked
8110029
115,00 €
uptake roll with rotatable load hook
- roller out of alu with brass brushing
- instead of mount bracket with rotatable load hook and backup
- roll-diameter 115 mm or 200 mm
Description
Material number
Price
uptake roll up to diameter 16 mm with rotary load hook
8111016
80,50 €
uptake roll up to diameter 29 mm with rotary load hook
8111029
116,00 €
uptake roll for insulated conductor
- for insulated conductor and conductor bundles
- up 4 x 95 mm²
- plastic roll
1 1,0 Stck.
8149496 : plastic pulley ø 150 mm / 160 mm drilling hole = 18,2 mm
Description
Material number
uptake roll, roll inner diameter 50 mm
8149495
www.bsd-dresden.de
Price
168,00 €
Seite 183
pulleys
pulley, complete
- with rotatable forged safety hook and hook protection
- galvanized, solid steel case
- with 3 adjacent rollers, out of plastic
- brass rollers on request
- 20 m hemp rope
Description
Material number
pulley, polyamided roll 40mm, 6 mm x 20 m hemp rope, 100kg
8109100
62,00 €
Price
pulley, polyamided roll 50mm, 8 mm x 20 m hemp rope, 150kg
8109150
80,50 €
pulley, polyamided roll 60mm, 10 mm x 20 m hemp rope, 200kg
8109200
85,50 €
wire rope hoist
- simple and save handling
- light
- load pressure break avoids accidental drop of the load
- simple rope line175 kg tensile load
- double rope line350 kg tensile load
Description
Material number
wire rope hoist 350 kg 2,5 kg
8112350
Price
392,00 €
universal wire rope hoist
- for tensioning, pulling, lifting and securing the load
- for unlimited rope length
- according to accident prevention regulation VBG 8
Description
Material number
universal wire rope hoist 800 kg
8151080
575,00 €
universal wire rope hoist 1600 kg
8151160
785,00 €
www.bsd-dresden.de
Price
Seite 184
chain lever hoist, alu
- specially for narrow spatial relations
- low weight and low construction height
- operated by back and forth swiveling of the ratchet lever
- the switching between pulling and sinking is carried ot by one on the ratchet
arm attached small lever
standard equipment:
- lever, casing lid and hand wheel out of alu
- casing cast version
- chain activation, the chain will be moved by turning the hand wheel or by
pulling at the chain
- transmission with needle bearing, for light run
- more hoisting possible on request
Description
Material number
chain lever hoist 750 kg
8112750
377,00 €
chain lever hoist 1500 kg
8112150
793,00 €
www.bsd-dresden.de
Price
Seite 185
climbing iron
climbing iron
- climbing iron according to DIN 48345
- for wooden poles with variable diameter
- with 3 peaks
Description
Material number
climbing iron for wooden poles diameter, 90 - 180 mm
8124180
370,00 €
Price
climbing iron for wooden poles diameter, 150 - 240 mm
8124240
329,00 €
climbing iron for wooden poles diameter, 200 - 300 mm
8124300
340,00 €
climbing iron for wooden poles diameter, 230 - 340 mm
8124340
381,00 €
line cleaning brush
- to remove layers of oxide and dirt
- there are different brushes for different line types
- red brush: for copper lines
- green brush: for alu lines
Description
Material number
Price
line cleaning brush, aluminum line 5 - 24 mm
8140001
79,50 €
line cleaning brush, aluminum line 24 - 42 mm
8140002
65,50 €
line cleaning brush, copper line 5 - 24 mm
8140003
79,50 €
line cleaning brush, copper line 24 - 42 mm
8140004
65,50 €
alu cleaning brush for lines
- to remove oxide and soil layers of lines
- out of 2 anodized, connected by hinges, aluminium half-shells
- bristles out of V2A-steel, length ca. 120 mm
- for cable diameter 10 to 40 mm, or bigger
- 2 different bristles for different cable types
- blue bristle: for aluminium lines
- red bristle: for copper lines
Description
Material number
line cleaning brush for aluminium line, blue
8140005
82,50 €
line cleaning brush for copper line, red
8140006
75,00 €
www.bsd-dresden.de
Price
Seite 186
earthing and short-circuiting devices
earthing and short circuit device, set
- according to DIN VDE 0683 part 100 (EN/IEC 61230)
- for earthing and short circuit elektronical installations on the
working position as potential equalization according DIN
VDE 0105 part 100 (EN 50110)
- short circuit current with 25 mm² 4,9 kA / 1 s
consisting of:
- 2 pce earthing and short circuit devices, 25 mm², hook cable lug
- 2 pce earthing clamp mit flexible turning handle
- 1 pce earthing handle with double function
- 3 pce earthing cartridge NH 00
- 6 pce earthing cartridge NH 1-3
- 3 pce earthing bits E33, screw thread insulated
- 1 pce tin case, 440 x 330 x 66 mm
Description
Material number
earthing and short circuit device, set
8148000
Price
1.095,00 €
earthing and short circuit device with hook cable lug
- for cable distribution box
- 2 possibilities to mount the earthing clamp
(81486006 or 8148607)
- earth cable 500 mm, short circuit cables 200 mm, 400 mm and 600 mm
- short circuit current:16 mm² 3,2 kA / 1 s
25 mm² 4,9 kA / 1 s
35 mm² 6,9 kA / 1 s
Description
Material number
Price
earthing device 16 mm² with earth sided hook cable lug
8148602
156,00 €
earthing device 25 mm² with earth sided hook cable lug
8148603
155,00 €
earthing device 35 mm² earth sided hook cable lug
8148604
166,00 €
earthing clamp with flexible turning handle und two adjust possibilities
8148606
79,50 €
earthing clamp, with wing screw
8148607
44,00 €
earthing and short circuit device with flexible turning handle
- for cable distribution box
- turning handle with two adjust possibilities (45° and 90°)
- clamping range up to 20 mm²
- earth cable 500 mm, short circuit cables 200 mm, 400 mm and 600 mm
- short circuit current:25 mm² 4,9 kA / 1 s
35 mm² 6,9 kA / 1 s
Description
Material number
earthing device 25 mm², with turning handle
8148600
212,00 €
earthing device 35 mm², with turning handle
8148601
217,00 €
www.bsd-dresden.de
Price
Seite 187
earthing and short circuit device, earthing lug with spring preload
- for house entrance panels
- clamp range up to 24 mm
- earth cable 280 mm, short circuit cables each 140 mm
- mounting via turning handle (Nr. 8149144)
- short circuit current at 16 mm² 3,2 kA / 1 s
Description
Material number
earthing device 16 mm² with spring preload
8148605
Price
193,00 €
earthing cartridge for earthing device
- M10 connecting to insert to NH-Fuse lower sections
via earthing handle with double-function
- schort circuit current 6,9 kA / 1 s
Description
Material number
earthing cartridge NH 00
8148609
20,50 €
Price
earthing cartridge NH 1-3
8148610
31,50 €
earthing cartridge NH 4a
8148611
41,00 €
earthing bits for earthing device
- M10 connecting to insert to screw-fuse lower sections
via earthing handle with double-function
- schort circuit current 4,9 kA / 1 s
Description
Material number
earthing bit E27, screw thread insulated
8148612
24,50 €
earthing bit E33, screw thread insulated
8148613
26,00 €
earthing bit E27, screw thread conducting
8148614
36,50 €
earthing bit E33, screw thread conducting
8148615
37,00 €
www.bsd-dresden.de
Price
Seite 188
earthing handle with double-function
- to insert earthing cartridges or earthing bits with M10 connecting
- to connect the earthing device to cartridges (AF 19)
- length: 355 mm
Description
Material number
earthing handle with double function
8148608
Price
75,50 €
tin case for earthing device
- to storage earthing and short circuit devices and accessory
Description
Material number
tin case, empty 380 x 260 x 80 mm
8148616
95,00 €
Price
tin case, empty 440 x 330 x 66 mm foam insert
8148617
211,00 €
earthing and short circuit device set for streetlights
- for E14 safety screw insets
- for distribution board of streetlights
- aluminium adapter for E27 to E14 thread
- max. pre-fuse 32 A - circuit breaker (B characteristic)
- 3 permanently attached E14 safety screw insets and
earthing clamp with spring preload
- clamping area up to 24 mm
- set consits of:
2 earthing and short-circuit devices with E14 safety screw insets
6 E27 / E14 adapter
1 fitting screw wrench
1 turning handle with flexible spindle
1 plastic case
Description
Material number
earthing and short circuit device street lightning - complete set
8149140
694,00 €
earthing and short circuit device
8149141
213,00 €
adapter E 27 / E 14
8149142
13,50 €
fit bolt wrench
8149143
15,50 €
turning handle for earthing clamp
8149144
38,00 €
storage bag for earthing and short cut device
8149145
175,00 €
www.bsd-dresden.de
Price
Seite 189
earthing and short circuit device for house connection box
- 3 short ciruit cartridge, size 00
- 1 earthing cable and short circuit cable, cross section 25 mm ² -ESUY
bough length 3 x 200 mm
earth cable length 1 x 300 mm
- 1 earthing clamp to install to bars up to 12 mm
- short-circuit current 4,9 kA / 0,5 s
- connection with hot stick Art.-Nr. 8 149 500
Description
Material number
earthing and short circuit device, house connection box , NH 00
8149225
Price
358,00 €
earthing and short circuit device LV distributions
- 3 short ciruit cartridge, size 00
- 1 earthing cable and short circuit cable, cross ection 25 mm ² -ESUY
bough length 250/ 500/ 750 mm
earth cable length 1 x 300 mm
- 1 earthing clamp to install to bars up to 12 mm
- short-circuit current 4,9 kA / 0,5 s
- connection with hot stick Art.-Nr. 8 149 500
Description
Material number
earthing and short circuit device low voltage distributer, NH 00
8149325
Price
370,00 €
earthing and short circuit device with short ciruit cartridges
- to handle with for NH low-voltage handhold
- for sizes 1; 2 and 3
- short-circuit current
25 mm² 5 kA / 1s
35 mm² 7 kA / 1s
Description
Material number
earthing and short circuit device 25 mm², NH 1 / 2 / 3
8149025
324,00 €
earthing and short circuit device 35 mm², NH 1 / 2 / 3
8149035
338,00 €
www.bsd-dresden.de
Price
Seite 190
earthing and short circuit device with short ciruit cartridge
- earthing clamp complete insulated with moveable handle
- to handle with NH low voltage handhold
- for sizes 1; 2 and 3
- other sizes on request
- short-circuit current
25 mm² 5 kA / 1s
35 mm² 7 kA / 1s
Description
Material number
earthing and short circuit device with moveable handhold 25 mm², NH 1 / 2 / 3
8149125
423,00 €
Price
earthing and short circuit device with moveable handhold 35 mm², NH 1 / 2 / 3
8149135
431,00 €
hot stick
- ball catch to install the earthing clamp
- to connect short circuit parts
Description
Material number
hot stick with ball catch
8149500
Price
62,00 €
coupling device, connection of 2 LV-Systems
- to handle with NH low-voltage handhold
- for sizes 1; 2 and 3
- connection wire out of OZONFLEX-rubber
- 1000 mm length
Description
Material number
coupling device to connect 2 low voltage systems
8149600
Price
181,00 €
short circuit cartridge
- short circuit cardridge can be connected with a line
- can serve as coupling of two low voltage systems
Description
Material number
short circuit cartridge 0,25 kg
8149050
www.bsd-dresden.de
Price
51,50 €
Seite 191
short circuit device LV overhead lines
- with independet spring terminal
- clamping range 3 - 180 mm diameter
- per clamp 1 copper short-circuit cable highly flexible
- PVC insulated
- section 16 mm²
- short-circuit current 4,5 kA / 0,5 s
Description
Material number
short circuit device 4-pole
8114004
474,00 €
Price
short circuit device 5-pole
8114005
574,00 €
short circuit device 6-pole
8114006
680,00 €
earthing and short circuit device MV-Systems
- 3 universal phase-screw-clamps MT-1921, top
- 1 universal earthing clamp
- 1 earthing- and short circuit cable
- bough lengths 600 mm, earth-cable lengths 1800 mm
- phase-fix-point orbicula 25 / 30 mm diameter
- short circuit cable 120 mm² / earth cable 50 mm²
- short circuit current 23,7 kA / 1 s IK
- other sizes on request
Description
Material number
universal short circuit device 120 mm² / 50 mm²
8148500
Price
512,00 €
earthing stick
- earthing stick made out of GRP-pipe 36 mm diameter
- with bayonet catch
Description
Material number
earthing stick 1000 mm GRP - tube
8148301
80,50 €
earthing stick 1500 mm GRP - tube
8148302
98,00 €
www.bsd-dresden.de
Price
Seite 192
wall mounting
- to uptake device and earthing stick
Description
Material number
wall mounting for device and earthing stick
8148400
Price
56,50 €
earthing and short circuit device MT-500-P
MT-500-P earthing- and short-circuit device
to operate from the ground, for 3 phased medium voltage overhead lines
- earthing- and short-circuit device for use at the workplace
- to attache to any place between two poles
- clamps lock automatically by hanging up
- suitable for maximal short circuit current
Ik = 6,9 kA 1s with short-circuit cables 35 mm²
- suitable for overhead line heights up to 10,5 m and conductor diameters up
to 22 mm
- avialable with short-circuit cable up to 35 mm²
normal version complete like described below.
3 telescopic earthing tubes out of special aluminium,
length continuously variable adjustable between 2,25 m and 6 m,
with self locking clamps, round conductors up to 22 mm diameter
3 earthing- and short-circuit cable, highly flexible, transparent wraped,
cross section selectable 25 mm² or 35 mm²,
length 6 m summarized to 1 earthing clamp MT-480
1 stick earther out of forged steel
1 earthing stick out of glass-fibre reinforced polyester tube with
special coupling, length 2 m
1 extension stick out of glass-fibre polyester tube
1 case for admission of the earthing tubes, of the stick earther and the
earthing- and extension stick
Description
Material number
earthing and short circuit device MT-500-P three-phase 35 mm²
8114003
Price
2.090,00 €
voltage detection-head for hot stick
- 10-30 kV
- suitable to hot stick with gear coupling
- used for overhead lines and indoor
- hook electrode to hang in overhead lines
- with insulated telescopic bar
- can be used from the ground in the overhead line via insulated telescopic rod
Description
Material number
voltage detector head 10-36 kV
8114010
1.020,00 €
telescopic rod, insulating up to 36 kV with gear coupling and scale up to 10,6m
7510020
995,00 €
storage bag 1,8 m with pocket for telescope measuring rod
7510021
81,00 €
hot stick working heads 1,5 m locking 36 kV
7480052
186,00 €
hot stick working heads 2,0 m locking 36 kV
7480056
245,00 €
hook electrode for voltage detector PHE III
8114015
17,50 €
www.bsd-dresden.de
Price
Seite 193
earthing and short circuit device for 3-phase MV overhead lines
- 3 spring terminals with highly flexible copper short-circuit cables, PVC insulated
- dismountable opertion rod 2 m
- distance between terminals 2,25 m
- steel sheet case 425 x 200 x 150
- copper earthing cable, PVC coated, 16 m on reel
- maximal short-circuit current:
Ik = 4,9 kA 1s with short circuit cables 25 mm²
Ik = 6,9 kA 1s with short circuit cables 35 mm²
Description
Material number
earthing and short circuit device three-phase 25 mm²
8148025
1.530,00 €
earthing and short circuit device three-phase 35 mm²
8148035
1.545,00 €
www.bsd-dresden.de
Price
Seite 194
cable processing tools
cable stripping pliers
- for cable diameter from 20 mm up to 54 mm
- with 4 cutting wheels for round-cut (RC), 2 moveable
- 1 cutting wheel for longitudinal cut (LC)
- double beads to protect the blades
- double-joint and alignment of the blades allow
to let go of the hand from the cable
- base body out of aluminium and stainless steel,
handles black PVC
- cutting wheels with other depth of cut on request
Description
Material number
cable stripping plier, RC 2,0/LC 2,5 for diameter 20 - 54 mm
8115010
455,00 €
Price
cable stripping plier, RC 2,0/LC 2,5 for diameter 20 - 54 mm
8115011
455,00 €
spare-kit, 4 cutting wheels for RC (2,0 mm), 1 cutting wheel LC (2,5 mm)
7060008
178,00 €
spare-kit, 4 cutting wheels for RC (2,0 mm), 1 cutting wheel LC (2,8 mm)
7060009
178,00 €
cable stripping tool
- for removing insulation coating on cables from ø 25 mm
- adjustable cutting depth 0 - 5 mm
- changeable blade
- suitable for longitudinal and circular cuts
- substitute blade also for insulated conducting
Description
Material number
Price
stripping tool for diameter from 25 mm IEC 60900:2004
8135180
139,00 €
substitute blade for cable stripping tool
8135171
40,00 €
medium voltage case- set
complete assembly case consisting of:
- sheath cutter GB-M20 with plastic insert
- peeling device GB-P20 with silicone tube
- universal edge breaker
- hexagon socket wrench for changing blade
- manual
- case with foam insert
- cuts VPE-outer sheath and insulation layer sheath
- exact break possible for 28 mm strength
- on round conductor up to ø 25 mm
Description
Material number
MV case - set, plastic transport case
8152000
www.bsd-dresden.de
Price
1.345,00 €
Seite 195
sheath cutter GB-M20
- cuts VPE-outer sheath and insulation layer sheath
- exact break possible of the outer sheath
- for single conductor cable 10-30 kV
- between 15 and 50 mm cable diameter
Description
Material number
sheath cutter GB-M20 35 - 500 mm²
8152001
Price
substitute blade 10 mm for sheath cutter GB-M20
8153004
56,50 €
substitute blade set 10mm (5 pieces) for sheath cutter GB-M20
8153002
231,00 €
532,00 €
peeling device GB-L10
- peels extruded conducting layer of VPE- medium voltage cable
- special for work of smallest insulation diameters of
ca. 20 mm in the section of 10 and 20 kV
- suitable especially in cramped conditions
Description
Material number
peeling device GB-L10
8152200
Price
320,00 €
peeling device GB-L20
- for VPE cables from 35 mm² 10 kV up to 500 mm² 30 kV
- without previous grease
- automatic feed during the peeling
Description
Material number
peeling device GB-L20
8152220
www.bsd-dresden.de
Price
576,00 €
Seite 196
peeling device GB-P20
- for controlled peeling of the tough extruded outside conduction layers on
medium voltage cable with 10 - 30 kV
- field of work 10 - 50 mm cable diameters
- start with the peeling on the end of the cable, the take off measure
is ca. 25 mm
- through simple turning around the hand crank , you can also start in the
middle of the cable, the take off measure is then 10 mm
- consist of hard metal, polished
- peeling depth can be manually adjusted,
0 - 1,2 mm in 0,1 mm steps
- automatic work feed
- on the end of the peeling operation the circle cut will be reached by simple
moving back of the glide jaw
Description
Material number
Price
peeling device GB-P20 35 - 500 mm²
8152002
536,00 €
substitute blade for peeling device GB-P20
8153005
73,50 €
substitute blade set 5 piece for peeling device GB-P20
8153003
262,00 €
round peeling device
- for peeling the outer conducting layer of plastic cables
- conducting layer thickness up to 1,2 mm can be peeled
- adjustable stop can be equipped, if required
- 10 kV-cable up to 25 mm²
30 kV-cable up to 500 mm²
- up to 52 mm cable diameter
- delivered with case for transport
Description
Material number
round peeling device incl. stop ring and silicone
8152400
Price
630,00 €
lengthwise peeling GB-HS20
- for controlled peeling of outer extruded conduction layers
- for sector shaped cable
- through lengthwise cut direction
- peeling of EPR-power cable with rubber insulating partially possible
- maximum cutting depth 0,6 mm up to 0,7 mm
- for cable diameter 10 mm up to 50 mm
- with wheel on the underside
Description
Material number
lengthwise peeling device for conduction layer GB-HS20
8152410
www.bsd-dresden.de
Price
404,00 €
Seite 197
silicone for peeling devices
- 100 ml per tube
Description
Material number
silicone for peeling device 100 ml / tube
8152005
Price
19,00 €
edge breaker GB-KG05-3
- universal edge breaker
- for touching the contrasting VPE-insulation
- variable to use for all standard cross-sections of medium voltage cable up to
300 mm²
- working field 15 - 40 mm
- by using the edge cutter the out slide-forces will be reduced to a minimum
and a damage of the cable set will be avoided
Description
Material number
edge breaker up to 300 mm²
8152004
Price
199,00 €
edge breaker 35° for 10 - 30kV-cable
- tool for edge breaking
- easy to handle
- prevents damage to cable
Description
Material number
edge breaker 16-50 mm² (KG 0,5)
8152010
151,00 €
edge breaker 70-95 mm² (KG 0,8)
8152020
151,00 €
edge breaker 120-150 mm² (KG 1,0)
8152030
151,00 €
edge breaker 185-240 mm² (KG 2,0)
8152040
151,00 €
www.bsd-dresden.de
Price
Seite 198
cutting device for N(A)KLEY cable
- cutting device for the Rheydter-cut on alu-sheath of NAKLEY-cable
- with cutting depth limit to avoid cable damage
- for aluminium sheaths up to a maximum diameter of 35 mm
- angle adjustment of the cutting wheel possible 45°
- integrated damping system evens small irregularities of the aluminium
- special designs on request
Description
Material number
Price
cutting device for NAKLEY cable
8118000
639,00 €
substitute cutting wheel for NAKLEY cutting device
8118010
100,00 €
punch pliers for N(A)KLEY cable assembly
- to punching the hole in to the alu sheath
for neutral conductor-connection
Description
Material number
punch pliers for NAKLEY cable
8152600
Price
543,00 €
seam pliers
- straight jaw width 60 mm
- suitable to smooth the alu sheath of NAKLEY cable
Description
Material number
seam pliers to smooth the aluminium sheath
8152601
www.bsd-dresden.de
Price
59,50 €
Seite 199
sheet pliers
- for straight continuouse and figure cuts
- blades polished
- for sheet thickness up to max. 1,0 mm at a strength 600 N/mm²
- black coated, handle with blue PVC-coat
Description
Material number
sheet pliers 260 mm
8152602
Price
41,00 €
N(A)KLEY-case
content:
1
2
3
4
5
6
7
8
1,0 Stck.
1,0 Stck.
1,0 Stck.
1,0 Stck.
1,0 Stck.
1,0 Stck.
1,0 Stck.
1,0 Stck.
8109010 :
8118000 :
7116205 :
8152600 :
8152601 :
8152602 :
7418140 :
050006 :
plastic-case, 452 x 383 x 144 mm, black, empty, for N(A)KLEYcutting device for NAKLEY cable
plier for NAKLEY-wires , 200 mm
punch pliers for NAKLEY cable
seam pliers to smooth the aluminium sheath
sheet pliers 260 mm
wedge, length: 140 mm, red
foam insert for NAKLEY- case
Description
Material number
plastic-case equipped with tools for processing oil paper insulated cables
8109000
www.bsd-dresden.de
Price
1.590,00 €
Seite 200
cable cutter
cable shears 600 mm
- low effort through double lever
- changeable head up to 27 mm ø
- for cable up to 185 mm²
Description
Material number
cable shears 185 mm²
8154601
153,00 €
Price
substitute head for cable shears 185 mm²
8154602
106,00 €
wire-cable shears 600 mm, wire and cable shears
- for copper and alu cable, wire cable and round steel
- for seperating of overhead lines with strain relief wire
- changeable head
- 14 mm diameter
Description
Material number
Price
wire-cable shears 150 mm²
8154600
255,00 €
substitute head for wire-cable shears 150 mm²
8155600
155,00 €
cable shears with lever transmisson
- cutting edges out of tempered Cr-V-Steel
- shock resistant coated grip tubes
- for cutting copper and aluminium cables
- E 2: 250 mm² up to 35 mm diameter
- E 3: 500 mm² up to 50 mm diameter
Description
Material number
cable shears E2 with lever transmission
8155530
substitute head for cable shears E2
8155531
82,50 €
cable shears E3 with lever transmission
8155780
202,00 €
substitute head for cable shears E3
8155781
125,00 €
www.bsd-dresden.de
Price
144,00 €
Seite 201
ratchet cable cutter SH, 250 mm and 280 mm
- one handed cutting of copper- and aluminium cable, single- and multi wired
cutting width:
- at 250 mm length 32 mm up to 4x 70 mm²
- at 280 mm length 52 mm up to 4x 150 mm²
- wide blade
- wide feed pawl with 5 teeth
- blade movable in both directions
- delivery of substitute components possible
- unsuitable for cutting of steel-wire or steel wire-cable!
Description
Material number
Price
ratchet cable cutter the 250 mm 240 mm²
8133250
151,00 €
ratchet cable cutter the 280 mm 600 mm²
8133280
184,00 €
ratchet cable cutter SH, 720 mm and 870 mm
- two handed ratchet-cable cutter
- for cutting copper and aluminium cables
- also to seperating of cable with band steel and lead casing
- cutting performance:
720 mm: opening width 60 mm (ca. 900 mm²)
870 mm: opening width 100 mm (ca. 1200 mm²)
- wide blade
- wide feed pawl with 5 teeth
- blade movable in both directions
- delivery of substitute components possible
Description
Material number
ratchet cable cutter, 720 mm, 900 mm²
8134720
514,00 €
ratchet cable cutter, 870 mm, 1200 mm²
8134870
619,00 €
www.bsd-dresden.de
Price
Seite 202
cable cutter, end cutter with ratchet K24 / K32
- cutting performance
- length 290 mm: 180 mm² Cu/ 250 mm² Al, max ø 24 mm
- length 306 mm: 250 mm² Cu/ 320 mm² Al, max ø 32 mm
- in every position unlockable
- through drawback spring the cutting edge will jump back to the starting position
- ergonomic, soft handle
Description
Material number
Price
cable cutter K24 length: 290 mm
8136290
192,00 €
cable cutter K32 length: 306 mm
8136310
201,00 €
cable cutter KS 45
- solid construction, for long lifetime
- very smooth-running ratchet drive
- needle bearing eccentric shaft
- turning-blade unlockable in every position
- excellent cutting quality also for finely stranded cables
- for copper- and aluminium-conductors up to 300 mm²
at a maximum of ø 45 mm
Description
Material number
cable cutter KS 45 length: 260 mm
8137450
Price
261,00 €
ratchet cable cutter KS 52
- cutting-range electric cable up to 52 mm diameter,
- Cu/ Al cable cross-section up to 500 mm²
- turning blade and cutting plate out of special hardened chrome-nickelsteel
- suitable for thin-sheet sheated cable
- unsuitable for cable with hardened stee-wires!
Description
Material number
ratchet cable cutter KS 52 length: 325 mm
8137420
www.bsd-dresden.de
Price
206,54 €
Seite 203
ratchet cable cutter KS 62
- cutting-range electric cable up to 62 mm diameter,
- Cu/ Al cable cross-section up to 750 mm²
- turning blade and cutting plate out of special hardened chrome-nickelsteel
- suitable for thin-sheet sheated cable
- unsuitable for cable with hardened stee-wires!
Description
Material number
ratchet cable cutter KS 62 length: 410 mm
8137410
Price
550,00 €
ratchet cable cutter KS 62 HD
- cutting-range up to 62 mm diameter,
- Cu/ Al cable up to 840 mm²
- splits cable with thin-sheet sheath or steel-sheathing in the
outside section
- unsuitable for cable with hardened steel wires!
Description
Material number
ratchet cable cutter KS 62 HD length: 410 mm
8138410
Price
636,00 €
ratchet cable cutter KS 80
- smoothly operating excenter drive
- suitable cable up to 80 mm diameter,
- Cu/ Al cable cross-section up to 1000 mm²
- suitable for cable with thin-sheet sheats or protection sheathing out
of soft steel wire
- unsuitable for hardened steel wires
Description
Material number
ratchet cable cutter KS 80 length: 610 mm
8139610
www.bsd-dresden.de
Price
726,00 €
Seite 204
street lightning
connection set for street lightning cables
content:
- crimping plier for street lightning connector Cu re 10
- 50 pce. crimp-connector 10 mm²
- 34 pce. screwconnector 2,5-16 mm²
- screwdriver insulated AF 2,5
- stripping plier 2,5-16 mm² especially for massive conductor 10+16 mm²
- transport case
Description
Material number
connection set for street lightning cables
8137500
882,00 €
crimping plier for street lightning connector
8137510
205,00 €
crimp-connector 10 mm², 50 pieces
8137511
189,00 €
screwconnector 2,5-16 mm², 34 pieces
8137512
404,00 €
screwdriver insulated AF 2,5
8137513
6,52 €
stripping plier 2,5-16 mm²
8137514
172,00 €
transport case
8137515
44,50 €
www.bsd-dresden.de
Price
Seite 205
hydraulic tools
hand hydraulic cable cutter HS-55
- light and compact
- rotatable head (180°) - with folding and knife guiding
- fast feed with double-pipe-hydraulic
- automatic pressure limitation
- oeration pressure: 700 bar (70 MPa) or 850 bar (85 MPa)
- cutting force: 43 kN
- maximum cable diameter: 50 mm
- delivery including carrier bag
Description
Material number
hand hydraulic cable cutter the HS-50 incl. carrier bag
8148050
Price
1.655,00 €
hand hydraulic cable cutter HS-85
- light and compact
- rotatable head (180°) - with special breech
for opening in every blade position
- with protection againt accidental opening
- fast feed with double-pipe-hydraulic
- automatic pressure limitation
- oeration pressure: 700 bar (70 MPa)
- cutting force: 60 kN
- maximum cable diameter: 85 mm
- delivery including carrier bag
Description
Material number
hand hydraulic cable cutter HS-85 incl. carrier bag
8148085
Price
1.615,00 €
hydraulic battery cutting tool BCP-025
battery cutting tool BCP-025, incl. battery, charger, carrying case
- light and compact through bar shape
- for ACSR-cables, copper and aluminium wires
- range of cutting 25 mm
- cutting force 55 kN
- rotatable head
- fast feed and manual return
- with LED-light to illuminate the work place
- multifunctional electronic for service indicator and battery control
- lithium ion accumulator 18 V/ 1,5 Ah
- length 320 mm
- weight 3,8 kg
Description
Material number
battery cutting tool BCL-025 incl. battery, charger, carrying case
8170200
www.bsd-dresden.de
Price
1.745,00 €
Seite 206
hydraulic battery cutting tool BCP-040
battery cutting tool BCP-040, incl. battery, charger, carrying case
- light and compact through bar shape
- for ACSR-cables, copper and aluminium wires
- range of cutting 45 mm
- cutting force 55 kN
- rotatable head
- fast feed and manual return
- with LED-light to illuminate the work place
- multifunctional electronic for service indicator and battery control
- lithium ion accumulator 18 V/ 1,5 Ah
- length 485 mm
- weight 5,3 kg
Description
Material number
battery cutting tool BCP-040, incl. battery, charger, carrying case
8170210
Price
2.290,00 €
hydraulic battery cutting tool BCP-055
battery cutting tool BCP-055, incl. battery, charger, carrying case
- light and compact through bar shape
- for copper and aluminium wires
- range of cutting 55 mm
- cutting force 43 kN
- rotatable head
- fast feed and manual return
- with LED-light to illuminate the work place
- multifunctional electronic for service indicator and battery control
- lithium ion accumulator 18 V/ 1,5 Ah
- length 505 mm
- weight 6,2 kg
Description
Material number
battery cutting tool BCP-055, incl. battery, charger, carrying case
8170220
Price
2.325,00 €
hydraulic battery cutting tool BCP-085
battery cutting tool BCP-085, incl. battery, charger, carrying case
- light and compact through bar shape
- for copper and aluminium wires
- range of cutting 85 mm
- cutting force 55 kN
- rotatable head
- fast feed and manual return
- with LED-light to illuminate the work place
- multifunctional electronic for service indicator and battery control
- lithium ion accumulator 18 V/ 1,5 Ah
- length 575 mm
- weight 9,4 kg
Description
Material number
battery cutting tool BCP-085, incl. battery, charger, carrying case
8170230
www.bsd-dresden.de
Price
2.720,00 €
Seite 207
hydraulic cutting head SK-40
- suitable for aluminium lines (ACSR), copper and aluminium cables
- for up to 40 mm diameter
- can be operated with hydraulic pump (pressure 700 or 850 bar)
- with folding clasp, knife guiding, quick connect nipple
- and dust protection flap
- operating pressure: 700 bar (70 MPa) or 850 bar (85 MPa)
- cutting force: 88 kN
Description
Material number
hydraulic cutting head SK-45 including connection plug
8170045
1.135,00 €
Price
carrier bag for cutting heads
8170086
91,50 €
hydraulic cutting head SK-55
- suitable copper and aluminium cables
- for up to 55 mm diameter
- can be operated with hydraulic pump (pressure 700 or 850 bar)
- with folding clasp, knife guiding, quick connect nipple
- and dust protection flap
- operating pressure: 700 bar (70 MPa) or 850 bar (85 MPa)
- cutting force: 43 kN
Description
Material number
Price
hydraulic cutting head SK-50
8170150
1.235,00 €
carrier bag for cutting heads
8170086
91,50 €
hydraulic cutting head SK-85
- suitable for copper and aluminium cables
- can be operated with hydraulic pump (pressure 700 or 850 bar)
- with folding clasp for opening in every blade position
- with protection againt accidental opening
- operation pressure: 700 bar (70 MPa) or 850 bar (85 MPa)
- cutting force: 60 kN
Description
Material number
cutting head SK-85 up to 85 mm incl. connection plug
8170070
www.bsd-dresden.de
Price
1.015,00 €
Seite 208
hydraulic cutting head 95 hS-Light
- suitable for copper- and aluminium cables
- with lever block
- oil filter
- edge out of tool steel, hardened
- max. cable diameter: 95 mm
- operation pressure : 850 bar
- cutting force: 81,8 kN
Description
Material number
hydraulic cutting head 95 hS-light
8170105
1.630,00 €
Price
case for cutting head 95 hS
8170116
494,00 €
hydraulic cutting head 95 hS-steel
- suitable for copper- and aluminium cables, steel reinforcement
- with lever block
- oil filter
- edge out of high-speed steel
- max. cable diameter: 95 mm
- operation pressure : 850 bar
- cutting force: 81,8 kN
Description
Material number
Price
hydraulic cutting head 95 hS-steel
8170115
1.955,00 €
case for cutting head 95 hS
8170116
494,00 €
hydraulic cutting head 120 hS-light
- suitable for copper- and aluminium cables
- with lever block
- oil filter
- edge out of tool steel, hardened
- max. cable diameter: 120 mm
- operation pressure : 850 bar
- cutting force: 81,8 kN
Description
Material number
hydraulic cutting head 120 hS-light
8170125
2.445,00 €
case for cutting head 120 hS
8170136
466,00 €
www.bsd-dresden.de
Price
Seite 209
hydraulic cutting head 120 hS-steel
- suitable for copper- and aluminium cables, steel reinforcement
- with lever block
- oil filter
- edge out of high-speed steel
- max. cable diameter: 120 mm
- operation pressure : 850 bar
- cutting force: 81,8 kN
Description
Material number
hydraulic cutting head 120 hS-steel
8170135
2.930,00 €
Price
case for cutting head 120 hS
8170136
466,00 €
lithium ion battery for hydraulic cutting tools
- lithium ion accumulator with new nano-phosphat-technique
- 18 V, 1,5 / 3,0 Ah / 4,0 Ah
- for battery cutting tools of the BCL and BCP series
- for battery crimping tools of the BPL and BPC series
Description
Material number
Price
lithium ion battery for hydraulic tools 18 V/15, Ah
8170300
153,00 €
lithium ion battery for hydraulic tools 18 V/3,0 Ah
8170301
215,00 €
lithium ion battery for hydraulic tools 18 V/4,0 Ah
8170302
274,00 €
charger for lithium ion battery (1,4-4,0 Ah), 220 V power supply
8170305
118,00 €
auto-charger for lithium ion battery (1,5-4,0 Ah), 12V connection
8170306
118,00 €
safety cutting system
- authorized for DIN EN 50110-1 ( VDE 0105 part 1) § 6.2.3
- for cutting low and medium voltage cable up to 30 kV
- made according to DIN EN 50340 (VDE 0682 part 661)
- head: shears (SSA-95) or guillotine (SSA-120; SSA-85)
cutting area:
- SSA-85 up to 85 mm diameter
- SSA-95 up to 95 mm diameter
- SSA-120 up to 120 mm diameter
scope of delivery:
- 1 hydraulic shears
- 1 special high-pressure hose 10,5 m
- 1 leak free coupling
- 1 foot operating lever
- 1 two-step hydraulic pump with pedestal
- 1 case
Description
Material number
safety cutting system SSA-85
8117085
2.725,00 €
safety cutting system SSA-95
8117090
2.705,00 €
safety cutting system SSA-120
8117120
3.270,00 €
www.bsd-dresden.de
Price
Seite 210
mains-/accu safety cutting system
- for nominal voltages above 30 kV up to 60 kV
- at single-conductor cables for nominal voltages up to 110 kV
- cutting force: 68 kN
- Li-Ions Accumulator 5,2 Ah / 28,7 V
- protection class according to EN 60529 IP 54
- suitable for aluminium and copper cables
- weight ca. 14 kg
cutting range:
- SSA-95 hS up to 95 mm diameter
- SSA-120 hS up to 120 mm diameter
scope of delivery:
- hydraulic device incl. manometer and earthing connector
- cutting head
- 10 m high-pressure hose
- mains/recharge cable
- remote control
Description
Material number
safety cutting system SSA-95 hS, incl. carrying bag
8117095
5.915,00 €
safety cutting system SSA-95 hS, incl. transport case
8117105
6.055,00 €
safety cutting system SSA-120 hS, incl. carrying bag
8117100
6.570,00 €
safety cutting system SSA-120 hS, incl. transport case
8117110
6.865,00 €
www.bsd-dresden.de
Price
Seite 211
crimping tools
mechanical crimping pliers K 18
- single stroke plier with open C-crimping head
- 360° rotating head
- 2 telescopic lock handles
- length: 78 - 112 cm
- wire end ferrules up to 95 mm²
- Cu-pressing (standard according to VDE 0220) up to 185 mm²
- AI hexagonal compression up to 185 mm²
- Cu-pressing (commercial) up to 240 mm²
Description
Material number
mechanical crimping pliers HM-6D, open C-crimping head
8129000
Price
444,00 €
hydraulic battery crimping tool BPL-060-D
battery - crimping tool BPL-060-D, incl. battery, charger, carrying case
- for hexagon crimping dies of the series PK-6D, PH-6D, PR-6D
- Cu-crimping (standard according to VDE 0220 (240 mm²)
- Cu-crimping (DIN 46235) 240 mm²
- Al-crimping 240 mm²
- light and compact through bar shape
- with open C-head
- opening/stroke 13 mm
- pressing force 60 kN
- pressing head rotatable
- fast feed, return stop and manual return
- LED-light to illuminate the work place
- multifunction electronic for serviceindicator and battery control
- lithium ion battery 18 V/1,5 Ah
- length ca. 400 mm
- weight ca. 3,5 kg
Description
Material number
battery crimping tool BPL-060-D incl. battery, charger, carrying case
8170400
www.bsd-dresden.de
Price
2.055,00 €
Seite 212
crimping dies PK-6D
- hexagon crimping dies according to DIN 48083 for connecting
material according to DIN 46235, DIN 46287, Cu + Al suitable for
following tools:
BSD:
K 18 (nr.: 8129000)
BLP-060-D (nr.: 8170400)
KW Hydraulik:
MP-60-CD, P-60-CD, HP-60-CD, AP-60-CD-F12,
P-60-D, HP-60-D, AP-100-D
KKT:
MP-60/1, PP-60/1, HP-60/1, AP-60/1, HAP-60
Pfisterer:
GO-6, Primat GO-6
Rema:
MP-60, C-60-ST, HP-60-C, AP-60-C
Dr. Peters:
FLP-6-185, EPG-II-P, HPK-240-C, HPO-6-240,
EPG/HPG/HPK-U
Klauke:
K-18, PK-18, HK-60/18, EK-18 plus, PK/HK/EK-60-UNV
Cembre:
RH-50, RH-61, HT-50, HT-51, HT-60, HT-61
Clasen:
EPC-50-A, REC-60
Lemp:
MP-60-1, PP-60-1, HPI-60-1, API-60-1
- crimping width: aluminium: 7 mm / copper: 5 mm
- IN = index number
- SR = strain relieved
- TS = tensile strength
Description
Material number
hexagonal crimping die IN 5-Cu, SR= 6 mm²
8129020
48,50 €
hexagonal crimping die IN 6-Cu, SR= 10 mm²
8129021
48,50 €
hexagonal crimping die IN 8-Cu, SR= 16 mm² / TS= 10 mm²
8129022
48,50 €
hexagonal crimping die IN 10-Cu, SR= 25 mm² / TS= 25 mm²
8129023
48,50 €
hexagonal crimping die IN 12-Cu, SR= 35 mm² / TS= 35 mm²
8129025
48,50 €
hexagonal crimping die IN 14-Cu, SR= 50 mm² / TS= 50 mm²
8129027
48,50 €
hexagonal crimping die IN 16-Cu, SR= 70 mm² / TS= 70 mm²
8129029
48,50 €
hexagonal crimping die IN 18-Cu, SR= 95 mm²
8129031
48,50 €
hexagonal crimping die IN 20-Cu, SR= 120 mm² / TS= 95 mm²
8129033
48,50 €
hexagonal crimping die IN 22-Cu, SR= 150 mm² / TS= 120 mm²
8129034
48,50 €
hexagonal crimping die IN 25-Cu, SR= 185 mm² / TS= 150 mm²
8129036
68,00 €
hexagonal crimping die IN 5-Al, SR= 10 mm²
8129024
48,50 €
hexagonal crimping die IN 12-Al, SR= 16-25 mm² / TS= 16-25 mm²
8129026
48,50 €
hexagonal crimping die IN 14-Al, SR= 35 mm² / TS= 35 mm²
8129028
48,50 €
hexagonal crimping die IN 16-Al, SR= 50 mm² / TS= 50 mm²
8129030
48,50 €
hexagonal crimping die IN 18-Al, SR= 70 mm² / TS= 70 mm²
8129032
48,50 €
hexagonal crimping die IN 22-Al, SR= 95-120 mm² / TS= 95 mm²
8129035
48,50 €
hexagonal crimping die IN 25-Al, SR= 150 mm² / TS= 120 mm²
8129037
68,00 €
hexagonal crimping die IN 27-Al, SR= 185 mm²
8129038
68,00 €
hexagonal crimping die IN 28-Al, SR= 185 mm² / TS= 150-185 mm²
8129039
68,00 €
www.bsd-dresden.de
Price
Seite 213
crimping dies PH-6D
- hexagon crimping dies
- for cable lugs and connector out of copper
- DIN related
- crimping width: 5 mm
Description
Material number
hexagonal crimping die PH-6-6D, similar to DIN for 6 mm²
8129040
48,50 €
hexagonal crimping die PH-10-6D, similar to DIN for 10 mm²
8129041
48,50 €
hexagonal crimping die PH-16-6D, similar to DIN for 16 mm²
8129042
48,50 €
hexagonal crimping die PH-25-6D, similar to DIN for 25 mm²
8129043
48,50 €
hexagonal crimping die PH-35-6D, similar to DIN for 35 mm²
8129044
48,50 €
hexagonal crimping die PH-50-6D, similar to DIN for 50 mm²
8129045
48,50 €
hexagonal crimping die PH-70-6D, similar to DIN 70 mm²
8129046
48,50 €
hexagonal crimping die PH-95-6D, similar to DIN for 95 mm²
8129047
48,50 €
hexagonal crimping die PH-120-6D, similar to DIN for 12 mm²
8129048
48,50 €
hexagonal crimping die PH-150-6D, similar to DIN for 150 mm²
8129049
48,50 €
hexagonal crimping die PH-185-6D, similar to DIN for 185 mm²
8129050
48,50 €
hexagonal crimping die PH-240-6D, similar to DIN for 240 mm²
8129051
48,50 €
www.bsd-dresden.de
Price
Seite 214
crimping dies PR-6D
- round-press crimping dies
- for rounding of Cu- and Al sector conductors
- crimping width : 20 mm
- SM = sector multiple wire
- SS = sector single wire
Description
Material number
round-press crimping die PR-4,1-6D, SM= 10 mm²
8129052
54,50 €
Price
round-press crimping die PR-5,1-6D, SM= 16 mm²
8129053
54,50 €
round-press crimping die PR-6,3-6D, SM= 25 mm² / SS= 35 mm²
8129054
54,50 €
round-press crimping die PR-7,5-6D, SM= 35 mm² / SS= 50 mm²
8129055
54,50 €
round-press crimping die PR-9,0-6D, SM= 50 mm² / SS= 70 mm²
8129056
54,50 €
round-press crimping die PR-10,5-6D, SM= 70 mm² / SS= 95 mm²
8129057
54,50 €
round-press crimping die PR-12,5-6D, SM= 95 mm² / SS= 120 mm²
8129058
54,50 €
round-press crimping die PR-14,0-6D, SM= 120 mm² / SE= 150 mm²
8129059
54,50 €
round-press crimping die PR-15,7-6D, SM= 150 mm² / SS= 185 mm²
8129060
54,50 €
round-press crimping die PR-17,5-6D, SM= 185 mm² / SS= 240 mm²
8129061
54,50 €
round-press crimping die PR-20,2-6D, SM= 240 mm² / SS= 300 mm²
8129062
54,50 €
mechanical crimping pliers HM-6C for C-cup
- single stroke plier with head for exchangeable dies
- telescopic lock handles
- Cu-crimping according to DIN 46235 up to 240 mm²
- Cu-crimping (standard) according to VDE 0220 up to 300 mm²
- AI-crimping up to 240 mm²
Description
Material number
mechanical crimping pliers HM-6C for C-cup
8129080
Price
579,00 €
hand hydraulic crimping pliers HH-6C
- closed crimping head
- crimping head rotatable
- double piston hydraulic with fastener
- manual return
- automatic pressure limit
- operation pressure: 700 bar
- stroke opening: 13 mm
- Cu-crimping according to DIN 46235up to 300 mm²
- Cu-crimping (standard) accordind to VDE 0220up to 300 mm²
- Al- crimping up tp 300 mm²
Description
Material number
hand hydraulic crimping pliers HH-6C for C-cup
8129101
986,00 €
transport case for crimping pliers steel sheet
8129100
138,00 €
www.bsd-dresden.de
Price
Seite 215
hydraulic battery crimping tool BPL-062
battery - crimping tool BPL-062, incl. battery, charger, carrying case
- for hexagon crimping dies of the series PK-6C, PH-6C, PR-6C
- Cu-crimping (standard according to VDE 0220 (300 mm²)
- Cu-crimping (DIN 46235) 300 mm²
- Al-crimping 300 mm²
- light and compact through bar shape
- with open C-head
- opening/stroke 13 mm
- pressing force 62 kN
- pressing head rotatable
- fast feed, return stop and manual return
- LED-light to illuminate the work place
- multifunction electronic for serviceindicator and battery control
- lithium ion battery 18 V/1,5 Ah
- length ca. 400 mm
- weight ca 3,8 kg
Description
Material number
battery crimping tool BPL-062 incl. battery, charger, carrying case
8170410
Price
1.540,00 €
hydraulic battery crimping tool BPP-062
battery - crimping tool BPP-062, incl. battery, charger, carrying case
- for hexagon crimping dies of the series PK-6C, PH-6C, PR-6C
- Cu-crimping (standard according to VDE 0220 (300 mm²)
- Cu-crimping (DIN 46235) 300 mm²
- Al-crimping 300 mm²
- with open C-head
- opening/stroke 13 mm
- pressing force 62 kN
- pressing head rotatable
- fast feed, return stop and manual return
- LED-light to illuminate the work place
- multifunction electronic for serviceindicator and battery control
- lithium ion battery 18 V/1,5 Ah
- weight ca. 5,4 kg
Description
Material number
battery crimping tool BPP-062 incl. battery, charger, carrying case
8170420
Price
2.035,00 €
hydraulic crimping head PK-6C
- closed crimping head with special fastener
- crimping head for connecting to hydraulic pump 700 bar
- stroke opening: 13 mm
- qiuck-release coupling
- Cu-crimping according to DIN 46235up to 300 mm²
- Cu-crimping (standard) accorind to VDE 0220 up to 300 mm²
- Al-crimpingup to 300 mm²
Description
Material number
hydraulic crimping head PK-6C for C-cup
8129105
www.bsd-dresden.de
Price
733,00 €
Seite 216
crimping dies PK-6C
hexagon crimping dies according to DIN 48083 for connecting material
according to DIN 46235, DIN 46287, Cu + Al suitable to following tools:
BSD:
- HM-6C (Art.: 8129080)
- H-6C (Art.: 8129085)
- PK-6C (Art.: 8129090)
- APE6-22 (Art.: 8170010)
KW Hydraulik:
MP/HP/AP60-CK
KKT:
MP/PP/HP/AP 60-2
Rema:
HP 62 D, AP 60
Dr. Peters:
P 22, HPK 300 E, HPO 6-300, EPG I P, HPK/HPG/EPG Uni
Klauke:
K 22, PK 22, HK 60/22, EK 22 plus, PK/HK/EK 60 UNV
- crimping width: aluminium: 7 mm / copper: 5 mm
- IN = index number
- SR = strain relieved
- TS = tensile strength
Description
Material number
hexagonal crimping die IN 5-Cu-6C, SR= 6 mm²
8171065
57,00 €
hexagonal crimping die IN 6-Cu-6C, SR= 10 mm²
8171075
57,00 €
hexagonal crimping die IN 8-Cu-6C, SR= 16 mm² / TS= 10-16 mm²
8171085
57,00 €
hexagonal crimping die IN 10-Cu-6C, SR= 25 mm² / TS= 25 mm²
8171105
57,00 €
hexagonal crimping die IN 12-Cu-6C, SR= 35 mm² / TS= 35 mm²
8171125
57,00 €
hexagonal crimping die IN 14-Cu-6C, SR= 50 mm² / TS= 50 mm²
8171145
57,00 €
hexagonal crimping die IN 16-Cu-6C, SR= 70 mm² / TS= 70 mm²
8171165
57,00 €
hexagonal crimping die IN 18-Cu-6C, SR= 95 mm²
8171185
57,00 €
hexagonal crimping die IN 20-Cu-6C, SR= 120 mm² / TS= 95 mm²
8171205
57,00 €
hexagonal crimping die IN 22-Cu-6C, SR= 150 mm² / TS= 120 mm²
8171225
57,00 €
hexagonal crimping die IN 25-Cu-6C, SR= 185 mm² / TS= 150 mm²
8171255
57,00 €
hexagonal crimping die IN 28-Cu-6C, SR= 240 mm²
8171285
57,00 €
hexagonal crimping die IN 32-Cu-6C, SR= 300 mm²
8171325
57,00 €
hexagonal crimping die IN 10-Al-6C, SR= 10 mm²
8171107
57,00 €
hexagonal crimping die IN 12-Al-6C, SR= 16-25 mm² / TS= 16-25 mm²
8171127
57,00 €
hexagonal crimping die IN 14-Al-6C, SR= 35 mm² / TS= 35 mm²
8171147
57,00 €
hexagonal crimping die IN 16-Al-6C, SR= 50 mm² / TS= 50 mm²
8171167
57,00 €
hexagonal crimping die IN 18-Al-6C, SR= 70 mm² / TS= 70 mm²
8171187
57,00 €
hexagonal crimping die IN 22-Al-6C, SR= 95-120 mm² / TS= 95 mm²
8171227
57,00 €
hexagonal crimping die IN 25-Al-6C, SR= 150 mm² / TS= 120 mm²
8171257
57,00 €
hexagonal crimping die IN 28-Al-6C, SR= 185 mm² / TS= 150-185 mm²
8171287
57,00 €
hexagonal crimping die IN 32-Al-6C, SR= 240 mm²
8171327
57,00 €
hexagonal crimping die IN 34-Al-6C, SR= 300 mm²
8171347
57,00 €
www.bsd-dresden.de
Price
Seite 217
crimping dies PKB-6C
Hexagon crimping dies for cable lug , for solified conductor according
to VDE 0295 class 2. Compatible to "Blue Connection" seires of Klauke.
Marked with a blue marking infront of size engraving.
Dies can be crimped with a 60 kN tool, e.g. following tools
BSD:HH-6C, BPL-062, BPP-062, PK-6C
Klauke:EKM 60/22L, K22 PK 22
Description
Material number
hexagonal crimping die PKB-6-6C, crimping width 9 mm, for 6 mm²
8129001
57,00 €
hexagonal crimping die PKB-10-6C, crimping width 9 mm, for 10 mm²
8129002
57,00 €
hexagonal crimping die PKB-16-6C, crimping width 9 mm, for 16 mm²
8129003
57,00 €
hexagonal crimping die PKB-25-6C, crimping width 9 mm, for 25 mm²
8129004
57,00 €
hexagonal crimping die PKB-35-6C, crimping width 9 mm, for 35 mm²
8129005
57,00 €
hexagonal crimping die PKB-50-6C, crimping width 9 mm, for 50 mm²
8129006
57,00 €
hexagonal crimping die PKB-70-6C, crimping width 9 mm, for 70 mm²
8129007
57,00 €
hexagonal crimping die PKB-95-6C, crimping width 9 mm, for 95 mm²
8129008
57,00 €
hexagonal crimping die PKB-120-6C, crimping width 9 mm, for 120 mm²
8129009
57,00 €
hexagonal crimping die PKB-150-6C, crimping width 9 mm, for 150 mm²
8129010
57,00 €
hexagonal crimping die PKB-185-6C, crimping width 5 mm, for 185 mm²
8129011
57,00 €
hexagonal crimping die PKB-240-6C, crimping width 5 mm, for 240 mm²
8129012
57,00 €
hexagonal crimping die PKB-300-6C, crimping width 5 mm, for 300 mm²
8129013
57,00 €
www.bsd-dresden.de
Price
Seite 218
crimping dies PH-6C
- hexagon crimping dies
- for cable lugs and copper connector
- DIN related
- crimping width: 5 mm
Description
Material number
hexagonal crimping die PH-6-6C, similar to DIN for 6 mm²
8129145
61,00 €
hexagonal crimping die PH-10-6C, similar to DIN for 10 mm²
8129146
61,00 €
hexagonal crimping die PH-16-6C, similar to DIN for 16 mm²
8129147
61,00 €
hexagonal crimping die PH-25-6C, similar to DIN for 25 mm²
8129148
61,00 €
hexagonal crimping die PH-35-6C, similar to DIN for 35 mm²
8129149
61,00 €
hexagonal crimping die PH-50-6C, similar to DIN for 50 mm²
8129150
61,00 €
hexagonal crimping die PH-70-6C, similar to DIN for 70 mm²
8129151
61,00 €
hexagonal crimping die PH-95-6C, similar to DIN for 95 mm²
8129152
61,00 €
hexagonal crimping die PH-120-6C, similar to DIN for 120 mm²
8129153
61,00 €
hexagonal crimping die PH-150-6C, similar to DIN for 150 mm²
8129154
61,00 €
hexagonal crimping die PH-185-6C, similar to DIN for 185 mm²
8129155
61,00 €
hexagonal crimping die PH-240-6C, similar to DIN for 240 mm²
8129156
61,00 €
hexagonal crimping die PH-300-6C, similar to DIN for 300 mm²
8129157
61,00 €
www.bsd-dresden.de
Price
Seite 219
crimping dies PR-6C
- round-press crimping dies
- to round copper and aluminium sector conductors
- crimping width: 20 mm
- SM = sector multiple wire
- SS = sector single wire
Description
Material number
Price
round-press crimping die PR-4,1-6C, SM= 10 mm²
8129158
77,00 €
round-press crimping die PR-5,1-6C, SM= 16 mm²
8129159
77,00 €
round-press crimping die PR-6,3-6C, SM= 25 mm² / SS= 35 mm²
8129160
77,00 €
round-press crimping die PR-7,5-6C, SM= 35 mm² / SS= 50 mm²
8129161
77,00 €
round-press crimping die PR-9,0-6C, SM= 50 mm² / SS= 70 mm²
8129162
77,00 €
round-press crimping die PR-10,5-6C, SM= 70 mm² / SS= 95 mm²
8129163
77,00 €
round-press crimping die PR-12,5-6C, SM= 95 mm² / SS= 120 mm²
8129164
77,00 €
round-press crimping die PR-14,0-6C, SM= 120 mm² / SS= 150 mm²
8129165
77,00 €
round-press crimping die PR-15,8-6C, SM= 150 mm² / SS= 185 mm²
8129166
77,00 €
round-press crimping die PR-17,5-6C, SM= 185 mm² / SS= 240 mm²
8129167
77,00 €
round-press crimping die PR-20,3-6C, SM= 240 mm² / SS= 300 mm²
8129168
77,00 €
hand hydraulic crimping pliers HH-13C
- open and rotatable crimping head
- double hydraulic piston with fast feed
- manual return
- automatic pressure limitation
- operation pressure 700 bar
- stroke-opening: 32 mm
- Cu-crimping according to DIN 46235up to 300 mm²
- Cu-crimping (standard) acoording to VDE 0220 up to 300 mm²
- Al-crimpingup to 300 mm²
Description
Material number
hand hydraulic crimping pliers HH-13C for C-cup
8129095
www.bsd-dresden.de
Price
1.320,00 €
Seite 220
hydraulic battery crimping tool BPP-130 (1 to 3)
battery - crimping tool BPP-130, incl. battery, charger, carrying case
- for hexagon crimping dies of the series PK-13C, PH-13C, PR-13C
- Cu-crimping (standard according to VDE 0220) 400 mm²
- Cu-crimping (DIN 46235) 300 mm²
- Al-crimping 300 mm²
- with open C-head
- opening/stroke 26 mm for BPP-1301
- opening/stroke 32 mm for BPP-1302
- opening/stroke 38 mm for BPP-1303
- pressing force 130 kN
- pressing head rotatable
- fast feed, return stop and manual return
- LED-light to illuminate the work place
- multifunction electronic for serviceindicator and battery control
- lithium ion battery 18 V/1,5 Ah
- weight 7,2 kg (BPP-1301), 7,7 kg (BPP-1302), 7,9 kg (BPP-1303)
Description
Material number
battery crimping tool BPP-1301, stroke 26mm incl battery, charger,carrying case
8170430
2.135,00 €
Price
battery crimping tool BPP 1302, stroke 32mm incl battery, charger,carrying case
8170433
2.155,00 €
battery crimping tool BPP 1303, stroke 38mm incl battery, charger,carrying case
8170435
2.245,00 €
hydraulic crimping head PK-13OC
- open C-head
- crimping head to connect to hydraulic pump 700 bar
- stroke opening: 32 mm
- quick-release coupling
- Cu-crimping according to DIN 46235up to 300 mm²
- Cu-crimping (standard) according to VDE 0220 up to 400 mm²
- Al-crimpingbis 300 mm²
Description
Material number
hydraulic crimping head PK-13OC for C-cup
8129099
750,00 €
Price
transport case for crimping pliers steel sheet
8129100
138,00 €
hydraulic crimping head PK-13GC
- closed head
- crimping head to connect to hydraulic pump 700 bar
- stroke opening: 26 mm
- quick-release coupling
- Cu-crimping according to DIN 46235 up to 300 mm²
- Cu-crimping (standard) according to VDE 0220 up to 400 mm²
- AI-crimpingup to 300 mm²
Description
Material number
hydraulic crimping head PK-13GC for C-cup
8129120
www.bsd-dresden.de
Price
876,00 €
Seite 221
crimping dies PK-13C
hexagon crimping dies according to DIN 48083 for connection material
according to DIN 46235, DIN 46287, Cu + Al suitable to following tools:
BSD:
- H-13C (nr.: 8129095)
- PK-13OC (nr.: 8129099)
- PK-13GC (nr.: 8129100)
- APE13-C (nr.: 8170011)
KW Hydraulik:
P-130, HP-130, AP-130
KKT:
PP/HP/AP 130-C
Rema:
C 130, CG 130, HP, 130 C, HP 130 H
Dr. Peters:
HPK 300 C, HPO 16-300, EPG III P, HPO 16-300 U, EPG VII P
Klauke:
PK 120/38, PK 120 U, HK/EK 120/25, HK/EK 120/42, HK/EK 120 U
Cembre:
RHC 131, HT 131-C, RHU 131-C, HT 131-UC, B 131-UC B 131-C
Clasen:
EPC 410, EPC 410 H, EPC 510-B, REC 100, REC 410
crimping width:
- 5 mm (8129175)
- 7 mm (8129185, 8129187, 8129189)
- 14 mm (8129177 - 8129184, 8129186, 8129188, 8129190)
- IN = index number
- SR = strain relieved
- TS = tensile strength
Description
Material number
hexagonal crimping die IN 6-Cu-13C, SR= 10 mm²
8129175
83,00 €
hexagonal crimping die IN 8-Cu-13C, SR= 16 mm² / TS= 10-16 mm²
8129176
83,00 €
hexagonal crimping die IN 10-Cu-13C, SR= 25 mm² / TS= 25 mm²
8129177
83,00 €
hexagonal crimping die IN 12-Cu-13C, SR= 35 mm² / TS= 35 mm²
8129178
83,00 €
hexagonal crimping die IN 14-Cu-13C, SR= 50 mm² / TS= 50 mm²
8129179
83,00 €
hexagonal crimping die IN 16-Cu-13C, SR= 70 mm² / TS= 70 mm²
8129180
83,00 €
hexagonal crimping die IN 18-Cu-13C, SR= 95 mm²
8129181
83,00 €
hexagonal crimping die IN 20-Cu-13C, SR= 120 mm² / TS= 95 mm²
8129182
83,00 €
hexagonal crimping die IN 22-Cu-13C, SR= 150 mm² / TS= 120 mm²
8129183
83,00 €
hexagonal crimping die IN 25-Cu-13C, SR= 185 mm² / TS= 150 mm²
8129184
83,00 €
hexagonal crimping die IN 28-Cu-13C, SR= 240 mm²
8129185
83,00 €
hexagonal crimping die IN 32-Cu-13C, SR= 300 mm²
8129187
83,00 €
hexagonal crimping die IN 28-Al-13C, SR= 185 mm² / TS= 150-185 mm²
8129186
83,00 €
hexagonal crimping die IN 32-Al-13C, SR= 240 mm²
8129188
83,00 €
hexagonal crimping die IN 34-Al-13C, SR= 300 mm²
8129190
83,00 €
www.bsd-dresden.de
Price
Seite 222
crimping dies PH-13C
- hexagon crimping dies for cable lugs and connector out of copper
- similar to DIN
crimping width:
- 7 mm (8129212)
- 8 mm (8129200, 8129201)
- 10 mm (8129202)
- 14 mm (8129203 - 8129211)
Description
Material number
hexagonal crimping die PH-10-13C, similar to DIN for 10 mm²
8129200
83,00 €
hexagonal crimping die PH-16-13C, similar to DIN for 16 mm²
8129201
83,00 €
hexagonal crimping die PH-25-13C, similar to DIN for 25 mm²
8129202
83,00 €
hexagonal crimping die PH-35-13C, similar to DIN for 35 mm²
8129203
83,00 €
hexagonal crimping die PH-50-13C, similar to DIN for 50 mm²
8129204
83,00 €
hexagonal crimping die PH-70-13C, similar to DIN for 70 mm²
8129205
83,00 €
hexagonal crimping die PH-95-13C, similar to DIN for 95 mm²
8129206
83,00 €
hexagonal crimping die PH-120-13C, similar to DIN for 120 mm²
8129207
83,00 €
hexagonal crimping die PH-150-13C, similar to DIN for 150 mm²
8129208
83,00 €
hexagonal crimping die PH-185-13C, similar to DIN for 185 mm²
8129209
83,00 €
hexagonal crimping die PH-240-13C, similar to DIN for 240 mm²
8129210
83,00 €
hexagonal crimping die PH-300-13C, similar to DIN for 300 mm²
8129211
83,00 €
hexagonal crimping die PH-400-13C, similar to DIN for 400 mm²
8129212
83,00 €
www.bsd-dresden.de
Price
Seite 223
crimping dies
- round-press crimping dies
- to rounding copper- and aluminium sector conductors
- crimping width: 35 mm
- SM = sector multiple wire
- SS = sector single wire
Description
Material number
Price
round-press crimping die PR-4,1-13C, SM= 100 mm²
8129220
91,00 €
round-press crimping die PR-5,1-13C, SM= 16 mm²
8129221
91,00 €
round-press crimping die PR-6,3-13C, SM= 25 mm² / SS= 35 mm²
8129222
91,00 €
round-press crimping die PR-7,5-13C, SM= 35 mm² / SS= 50 mm²
8129223
91,00 €
round-press crimping die PR-9,0-13C, SM= 50 mm² / SS= 70 mm²
8129224
91,00 €
round-press crimping die PR-10,5-13C, SM= 70 mm² / SS= 95 mm²
8129225
91,00 €
round-press crimping die PR-12,5-13C, SM= 95 mm² / SS= 120 mm²
8129226
91,00 €
round-press crimping die PR-14,4-13C, SM= 120 mm² / SS= 150 mm²
8129227
91,00 €
round-press crimping die PR-15,4-13C, SM= 150 mm² / SS= 185 mm²
8129228
91,00 €
round-press crimping die PR-17,5-13C, SM= 185 mm² / SS= 240 mm²
8129229
91,00 €
round-press crimping die PR-20,3-13C, SM= 240 mm² / SS= 300 mm²
8129230
91,00 €
round-press crimping die PR-22,5-13C, SM= 300 mm²
8129231
91,00 €
hydraulic crimping head PK-23
- crimping head with hydraulic cylinder to connect to hydraulic pump
- incl. coupling plug
- with captive safety bolt
- compression force: 230 kN
- for crimping dies of the series 230
- operating preassure: max 700 bar
- diameter 60 mm
- Cu-crimping (according to DIN 46235) up to 625 mm²
- Cu-crimping (standard) according to VDE 0220 up to 625 mm²
- Al crimping up tp 400 mm²
- additional dies and connection material on request
Description
Material number
crimping head PK-23, 230 kN incl. coupling plug
8170040
www.bsd-dresden.de
Price
803,00 €
Seite 224
hydraulic crimping head 150hP
- operation pressure: 850 bar
- standard stroke 19 mm
- crimping range: up to 300 mm², index 34
- crimping force: 154 kN
- for copper and aluminium cables
- crimping dies on request
Description
Material number
hydraulic crimping head 150hP
8170035
1.540,00 €
Price
case for crimping head 150hP
8170036
391,00 €
hydraulic crimping head 300hP
- operation pressure: 850 bar
- standard stroke 28 mm
- crimping range: up to 625 mm², index 44
- crimping force: 230 kN (700 bar), 280 kN (850 bar)
- for copper and aluminium cables
- crimping dies on request
Description
Material number
Price
hydraulic crimping head 300hP
8170055
1.045,00 €
case for crimping head 300hP
8170056
391,00 €
hydraulic crimping head 550hP
- operation pressure: 850 bar
- crimping range: up to 1.000 mm², index 58
- crimping force: 540 kN
- for copper and aluminium cables
- crimping dies on request
Description
Material number
hydraulic crimping head 550hP
8170065
1.895,00 €
case for crimping head 550hP
8170066
391,00 €
www.bsd-dresden.de
Price
Seite 225
hydraulic crimping head 990hP
- operation pressure: 850 bar
- crimping range: up to 1.200 mm², index 68
- crimping force: 960 kN
- for copper and aluminium cables
- crimping dies on request
Description
Material number
hydraulic crimping head 990hP
8170075
7.040,00 €
Price
case for crimping head 990hP
8170076
563,00 €
hydraulic crimping head 1000hP
- operation pressure: 850 bar
- crimping range: up to AK 82, 2.500 mm²
- crimping force: 960 kN
- cable diameter: 250 mm
- for copper cables
- crimping dies on request
Description
Material number
Price
hydraulic crimping head 1000hP
8170085
13.345,00
case for crimping head 1000hP
8170084
929,00 €
hydraulic crimping head 1500hP
- operation pressure: 850 bar
- crimping range: up to AK 94, 3.200 mm²
- crimping force: 1500 kN
- cable diameter: 250 mm
- for copper cables
- crimping dies on request
Description
Material number
hydraulic crimping head 1500hP
8170095
15.155,00
case for crimping head 1500hP
8170096
1.072,00 €
www.bsd-dresden.de
Price
Seite 226
hydraulic foot pump
- operating pressure: 700 bar
- fast feed
- solid double piston pump with automatic conveying switchover
- operating pressure: 700 bar
- high flow rate (17cm³ LP) in fast feed
- scope of delivery:
incl. 3,0 m hose
Description
Material number
two step hydraulic foot pump, 700 bar, incl. 3,0 m hydraulic hose
8170080
Price
939,00 €
combined accu/mains-hydraulic pump
- stepless power regulation
- pressure cutting off by reaching the operation pressure
- usage with accumulator oder at 230 V mains
- nominal pressure: max. 850 bar
- power: max. 1200 W
- main supply: 230 V, 50 Hz
- usable oil volume: 700 ml
- effiency: max. 0,71 l/min
- 28,7 V Li-Ionen accumulator
- protection type according to EN 60529 IP 54
- weight: ca. 6,9 kg
- incl. mains/recharge cable, remote control, carrying strap
Description
Material number
combined accu/mains hydraulic pump
8129292
Price
3.545,00 €
mains-hydraulic pump
- with intregrated engine stop to avoid overtravel of the hydraulic device
- remote control to start the work process
- automatic pressure cut off after finishing the work process
- mains connection 230 V
- protection type according to EN 60529 IP 20
- for continuous operation
- nominal pressure: max. 850 bar
- power: 400 W
- useable oil volume: 700 ml
- effiency: max. 0,71 l/m
- weight: 14 kg
Description
Material number
mains-hydraulic pump
8129290
www.bsd-dresden.de
Price
6.700,00 €
Seite 227
hydraulic hoses with fast coupling
- high pressure hoses
- pressure resistance: 850 bar
- fast coupling
- for our mains- and combined hydraulic pump
Description
Material number
hydraulic hose 2 m, with fast-coupling
8129286
297,00 €
Price
hydraulic hose 3 m, with fast-coupling
8129287
306,00 €
hydraulic hose 5 m, with fast-coupling
8129288
365,00 €
hydraulic hose 2 m, with fast-coupling
8129289
465,00 €
hydraulic hoses, standard
- steel reinforced high pressure hoses
- pressure resistance: 850 bar
- G 1/4", both-sided
Description
Material number
Price
hydraulic hose 3,0 m
8129275
96,00 €
hydraulic hose 5,0 m
8129276
127,00 €
hydraulic hose 10,0 m
8129277
212,00 €
coupling box
- coupling sleeve S115, G 1/4" lG
- coupling plug S115, G 1/4" IG nipple
- for hydraulic hoses
Description
Material number
coupling box S115 G 1/4 inch IG
8129278
58,00 €
connection plug S115 G 1/4 inch IG (nipple)
8129279
31,00 €
www.bsd-dresden.de
Price
Seite 228
hydraulic oil
- biodegradable
- electrically non-conductive
- for safety cutting units
Description
Material number
SHELL Naturelle HF-15E hydraulic oil, 1 l
8129280
51,50 €
Price
SHELL Naturelle HF-15E hydraulic oil, 5 l
8129281
106,00 €
lithium ion battery for hydraulic cutting tools
- lithium ion accumulator with new nano-phosphat-technique
- 18 V, 1,5 / 3,0 Ah / 4,0 Ah
- for battery cutting tools of the BCL and BCP series
- for battery crimping tools of the BPL and BPC series
Description
Material number
lithium ion battery for hydraulic tools 18 V/15, Ah
8170300
153,00 €
lithium ion battery for hydraulic tools 18 V/3,0 Ah
8170301
215,00 €
lithium ion battery for hydraulic tools 18 V/4,0 Ah
8170302
274,00 €
charger for lithium ion battery (1,4-4,0 Ah), 220 V power supply
8170305
118,00 €
auto-charger for lithium ion battery (1,5-4,0 Ah), 12V connection
8170306
118,00 €
www.bsd-dresden.de
Price
Seite 229
burner
security regulator for using under ground level
- DVGW tested
- integrated leak gas - testing device
- integrated hose rupture protection
- to use underground
- up to 1,5 kg/h
- Connection 3/8" left
Description
Material number
safety regulator
8120000
Price
78,50 €
handhold for burner
- double valve - handle
- adjustable igniting flame
Description
Material number
handhold for burner
8119100
Price
58,50 €
handhold for burner, piezo
- piezo ignition
- bayonet-clasp for fast burner change
- continuously adjustable flame
Description
Material number
handhold for burner, piezo ignition
8119000
www.bsd-dresden.de
Price
113,00 €
Seite 230
shrink burner
- to shrink shrink-hoses
- up to 50 mm or 130 mm diameter
- consumption 900 g/h or 1200 g/h
Description
Material number
shrink burner 28 mm
8122028
52,50 €
Price
shrink burner 38 mm
8122038
57,50 €
shrink burner, piezo
- to shrink shrink-hoses
- up to 50 mm or 150 mm diameter
- consumption 400 g/h or 900 g/h
- piezo ignition
Description
Material number
Price
shrink burner 28 mm piezo ignition
8121028
93,50 €
shrink burner 38 mm piezo ignition
8121038
98,00 €
hose set
- HD 4x4 mm, complete mounted with R 3/8"-connections
Description
Material number
hose-set 3 m
8122030
18,00 €
hose-set 5 m
8122050
25,50 €
www.bsd-dresden.de
Price
Seite 231
pressure regulator
- integrated hose rupture protection
- connection entry: DIN-combi
- connection outlet: 3/8" left side
- flow direction: max. 6 kg/h
Description
Material number
pressure regulator 2.0 bar
3121000
Price
76,00 €
turbo-cyclone burner, piezo
- special burner
- divided gas flow through diagonal channels
- and shaped through the steel burn pipe to a cyclone flame
- vortex flame encases the hole pipe
- gas consumption: 19 mm 240 g/l
- gas consumption: 25 mm 580 g/l
Description
Material number
turbo-cyclone burner 19 mm
3123018
75,50 €
Price
turbo-cyclone burner 25 mm
3123025
89,50 €
midget bottle
- with base, outlet and hook
- tube connection 3/8" left side
Description
Material number
midget bottle 425 g
8126000
Price
95,00 €
pressure regulator for midget bottle
- flow rate: max. 6 kg/h
Description
Material number
pressure regulator for midget bottle
8121041
www.bsd-dresden.de
Price
45,50 €
Seite 232
transport case, burner equipment
- solid wood box with steel angles all round
- to storage of components
- e.g. burner, handle, tubes etc.
- incl. holding for midget bottle
Description
Material number
transport case 280 x 180 x 330 mm
8125000
Price
108,00 €
decant connector
- bottle connection DIN combi
Description
Material number
decant connector for midget bottle
8121040
Price
18,50 €
flame guard mat
- only for soldering
- asbestos-free
Description
Material number
flame guard mat 250 x 250 mm
3128000
www.bsd-dresden.de
Price
27,00 €
Seite 233
cable-pulley
cable grip
- out of galvanized steel wire
- suitable to lay and pull cables
- construction with eyelet for end of cables
- ca. 1 m length
Description
Material number
cable grip 6-10 mm
8145001
64,00 €
Price
cable grip 10-15 mm
8145002
52,50 €
cable grip 15-20 mm
8145003
51,50 €
cable grip 20-25 mm
8145004
61,00 €
cable grip 25-30 mm
8145011
61,00 €
cable grip 30-40 mm
8145005
64,00 €
cable grip 40-50 mm
8145006
73,00 €
cable grip 50-60 mm
8145007
73,00 €
cable grip 60-70 mm
8145008
82,50 €
cable grip 70-90 mm
8145009
89,50 €
cable grip 90-110 mm
8145010
119,00 €
cable grip
- out of galvanized steel wire
- suitable to lay and pull cables
- construction with double eyelets
- ca. 1 m length
Description
Material number
cable grip 6-10 mm double eyelet
8146001
59,50 €
cable grip 10-15 mm double eyelet
8146002
59,50 €
cable grip 15-20 mm double eyelet
8146003
63,00 €
cable grip 20-25 mm double eyelet
8146004
67,00 €
cable grip 30-40 mm double eyelet
8146005
75,00 €
cable grip 40-50 mm double eyelet
8146006
79,50 €
cable grip 50-60 mm double eyelet
8146007
84,50 €
cable grip 60-70 mm double eyelet
8146008
90,50 €
cable grip 70-90 mm double eyelet
8146009
104,00 €
cable grip 90-110 mm double eyelet
8146010
148,00 €
www.bsd-dresden.de
Price
Seite 234
cable grip for 3 power single-core cables
- consists of 3 grips
- and a joint loop ø 22 mm
Description
Material number
cable grip for 3 power single-core cable 3x 30-40 mm
8147100
179,00 €
Price
cable grip for 3 power single-core cable 3x 40-50 mm
8147200
186,00 €
cable grip for overhead line, plaited loop
- out of galvanized steel wire
- suitable to pull overhead line wires and cables
- contruction with plaited loop
- tripple back-plaited
- 6 - 10,9 mm diameter, violet, 600 mm pitch length
- 11 - 15,9 mm diameter, green, 980 mm pitch length
- 16 - 22,9 mm diameter, yellow, 1200 mm pitch length
- 23 - 27,9 mm diameter, grey, 1200 mm pitch length
- 28 - 36,0 mm diameter, red, 1400 mm pitch length
Description
Material number
Price
cable grip 6 - 10,9 mm plaited loop
8145012
218,00 €
cable grip 11 - 15,9 mm plaited loop
8145013
273,00 €
cable grip 16 - 22,9 mm plaited loop
8145014
343,00 €
cable grip 23 - 27,9 mm plaited loop
8145015
420,00 €
cable grip 28 - 36,0 mm plaited loop
8145016
506,00 €
cable grip for overhead line, crimped loop
- out of galvanized steel wire
- suitable to pull overhead line wires and cables
- construction with aluminium sleeve between loop and plait
- steel-braid back-plaited
Description
Material number
cable grip 6 - 13,0 mm pressed loop
8145017
122,00 €
cable grip 12 - 19,0 mm pressed loop
8145018
146,00 €
cable grip 19 - 25,0 mm pressed loop
8145019
152,00 €
cable grip 25 - 32,0 mm pressed loop
8145020
181,00 €
cable grip 32 - 38,0 mm pressed loop
8145021
228,00 €
cable grip 38 - 48,0 mm pressed loop
8145022
364,00 €
cable grip 48 - 63,0 mm pressed loop
8145023
407,00 €
www.bsd-dresden.de
Price
Seite 235
torsion compensation swivel
- used as a connection between rope and cable
- protects cable fom rotating force
- made of steel
Description
Material number
torsion compensation swivel 20 mm 10 kN
8147001
144,00 €
Price
torsion compensation swivel 32 mm 30 kN
8147002
163,00 €
torsion compensation swivel 45 mm 60 kN
8147003
269,00 €
torsion compensation swivel 60 mm 110 kN
8147004
528,00 €
cable lay roll
- for undergroung cables
- made of galvanized steel
- available with steel or plastic wheels
Description
Material number
Price
cable lay roll 125 x 80 mm
8144125
64,00 €
earth cable roll, plastic
8144130
61,00 €
edge roll
- for underground cable
- sheathed, waterproof ball bearing
- frame out of galvanized steel
- to place on already layed cable
- steel or plastic rolls
Description
Material number
edge roll 130 x 70 mm
8140130
www.bsd-dresden.de
Price
207,00 €
Seite 236
protective tube entry
- removable protection tube
- for bay inlet bends
Description
Material number
protective tube 80 mm
8139080
Price
protective tube 100 mm
8139100
92,50 €
protective tube 120 mm
8139120
100,00 €
protective tube 150 mm
8139150
109,00 €
86,50 €
plug-in synthetic cord incl. wire pay-off
- on moveable reel
- infinetely variable brake
- other lengths are possible
Description
Material number
Price
plug-in synthetic rope incl wire pay-off 80 m x 9 mm
8152280
924,00 €
plug-in synthetic rope incl wire pay-off 100 m x 9 mm
8152300
1.080,00 €
plug-in synthetic rope incl wire pay-off 120 m x 9 mm
8152320
1.190,00 €
plug-in synthetic rope incl wire pay-off 150 m x 11 mm
8152850
1.420,00 €
plug-in synthetic rope incl wire pay-off 200 m x 11 mm
8152900
1.715,00 €
plug-in synthetic rope incl wire pay-off 300 m x 11 mm
8152901
2.440,00 €
plug-in synthetic rope incl wire pay-off 500 m x 11 mm
8152902
3.710,00 €
wire pay-off
- U-Steel ca. 50 x 30 x 6 mm
- maximum load: 150 kg
Description
Material number
wire pay off 50 x 30 x 4 mm
8113000
www.bsd-dresden.de
Price
375,00 €
Seite 237
pole installation and support rods
pole installation device
- with undivided support rod
- connected to rod head through a 13-unit thorn chain
- for wooden poles
- PVC coated lifting sling (for alu, steel and cement poles)
- alu pipe 50 x 4 mm ø
- thorn plate on the pole head
- 2 handle on each support rod
Description
Material number
pole installation device 3 m
8206030
666,00 €
Price
pole installation device 3,5 m
8206035
752,00 €
pole installation device 4,0 m
8206040
726,00 €
pole installation device 4,5 m
8206045
754,00 €
pole installation device 5,0 m
8206050
796,00 €
pole installation device 5,5 m
8206055
824,00 €
pole installation device 6,0 m
8206060
850,00 €
pole installation device 7,0 m
8206070
942,00 €
pole installation device
- with divided support rod
- connected to rod head through a 13-unit thorn chain
- for wooden poles
- PVC coated lifting sling (for alu, steel and cement poles)
- alu pipe 50 x 4 mm ø
- thorn plate on the pole head
- 2 handle on each support rod
Description
Material number
pole installation device, divided 3,0 m (2 x 1,5 m)
8207030
718,00 €
pole installation device, divided 3,5 m (2 x 1,75 m)
8207035
749,00 €
pole installation device, divided 4,0 m (2 x 2,00 m)
8207040
788,00 €
pole installation device, divided 4,5 m (2 x 2,25 m)
8207045
824,00 €
pole installation device, divided 5,0 m (2 x 2,5 m)
8207050
860,00 €
pole installation device, divided 5,5 m (2 x 2,75 m)
8207055
895,00 €
pole installation device, divided 6,0 m (2 x 3,0 m)
8207060
1.035,00 €
pole installation device, divided 7,0m (2 x 3,5 m)
8207070
1.135,00 €
www.bsd-dresden.de
Price
Seite 238
pole securing device
- for protection during climbing on wooden poles
- for temporarily protection of slant wooden poles
- for wooden poles up to 12 m heigth and 12-30 cm diameter
- only to use, if 3 sides are guyed
- if only 2 ground anchor can be used, use trees,
buildings or a truck to warrant the third guy.
Description
Material number
pole securing device MP 315 rope length 15 m
8206080
www.bsd-dresden.de
Price
2.045,00 €
Seite 239
switch rods
switch rod for nominal voltage up to 110 kV
- DIN VDE 0681 part 2
- Do not use during rainfall!
- deep dipping into the construction possibe through
extension LV
- insulating pipe: fiber-glass reinforced polyester pipe ø 30 mm
- shift pin: complete plastic coated
- end part: anti-slip plastic cap
- immersion depth
1030 mm: 135 mm
1500 mm: 415 mm
2000 mm: 765 mm
Description
Material number
switch rod, 1030 mm, for nominal voltage 30 kV
8201050
103,00 €
Price
switch rod, 1500 mm, for nominal voltage 60 kV
8201500
125,00 €
switch rod, 2000 mm, for nominal voltage 60 kV
8201000
147,00 €
insulating rod type BS for nominal voltage up to 110 kV
- with M 12 thread
- so screw on thread head product nr.: 8 205 000
- additional with hexagon bit
- also suitable for uptake clamps
- for spindle with hexagon earthing and short circuit devices
- insulating pipe : fiber-glass reinforced polyester pipe ø 30 mm yellow
- end part: antislip plastic cap
- immersion depth:
1000 mm: 175 mm
1500 mm: 475 mm
Description
Material number
insulating rod, 1000 mm, type BS for nominal voltage 30 kV
8205030
122,00 €
Price
insulating rod, 1500 mm, type BS for nominal voltage 30 kV
8205031
142,00 €
switch rod head
- DIN VDE 0681 part 2
- thread M 12
- to screw on hot stick with M12 thread
- steel, complete plastic coated
Description
Material number
switch rod head
8205000
www.bsd-dresden.de
Price
13,50 €
Seite 240
ladders
single-arm pole ladder, with fall protection
The ladder base compensates automatically uneven ground surfaces.
Ladder parts will be put-on and locked by quick fastener.
Mounting the ladder part through 2 supplied tension belts with ratchet.
The technican is fall protected from the use of the first ladder part through
fall arrester slide mechanism.
pole diameter:
ladder width:
material:
min. 200 mm bis max. 600 mm
370 mm
Alu, bright
Description
Material number
ladder heel for single-arm pole ladder
6017500
577,00 €
plug-in part for ladder 1,96 m for single-arm pole ladder
6017501
656,00 €
plug-in part for ladder 1,12 m for single-arm pole ladder
6017502
602,00 €
plug-in part for ladder 0,56 m for single-arm pole ladder
6017503
602,00 €
rail barrier detachable for single-arm pole ladder
6017504
22,50 €
fall arrester for single-arm pole ladder the
6017506
466,00 €
lifting device for single-arm pole ladder
6017505
519,00 €
www.bsd-dresden.de
Price
Seite 241
double-arm pole ladder, with fall protection
High safety through double-arm ladder construction and integrated fall arrester system.
Moveable fall arrester ensured permanent safety during setup.
Width, 30 mm deep rungs for slip resistance during climbing
Ladder system ist tested according to DIN EN 353 CE 0121 , DIN 18799 – 1 ,
DIN EN ISO 14122 – 4 , DIN EN 131.
Maximum total load from 150 kg for the ladder system.
Moveable fall arrester can be mounted and dismounted to the system in every position.
Moveable fall arrester is not in the scope of delivery.
pole diameter: min. 140 mm up to max. 1000 mm
ladder width: 505 mm
material:Aluminium
Description
Material number
Price
pole ladder, 3-part, length 8,80 m
8208001
2.850,00 €
pole ladder, 4-part, length 11,60 m
8208002
3.795,00 €
pole ladder, 5-part, length 14,40 m
8208003
4.740,00 €
pole ladder, 6-part, length 17,20 m
8208004
5.685,00 €
pole ladder, 7-part, length 20,00 m
8208005
6.630,00 €
moveable fall arrester for double-arm pole ladder
8208006
1.120,00 €
ladder adapter for variable level compensation
8208007
238,00 €
pole leaning device
- suitable to U-Profile-staves 32 mm wide
- with a distance of 28 cm
- pole diameter from 160 mm up to 600 mm
Description
Material number
pole leaning device universal for pole diameter: 160 - 600 mm
6019000
www.bsd-dresden.de
Price
155,00 €
Seite 242
pole cliff ladder
- light metal pole cliff ladder
- according to VRG 74/DIN 4567
- GS tested
- 5 years europe warranty
- slip-proof sqaue staves 30 x 30 mm
- ladder ends with changeable plastic shoes
- hang-in hook (320 mm diameter) made out of galvanized steel
- chain protection and carabiner hook against accidentally unhooking
- bigger hook diameters on request
- ladder wide inside : 370 mm
- ladder wide outside: 420 mm
Important notice: standard pole cliff ladders not for horizontal usage.
Description
Material number
cliff ladder for masts live working light metal 2,14 m
6017214
394,00 €
cliff ladder for masts live working light metal 2,70 m
6017270
480,00 €
cliff ladder for masts live working light metal 3,26 m
6017326
449,00 €
cliff ladder for masts live working light metal 3,82 m
6017382
490,00 €
cliff ladder for masts live working light metal 4,38 m
6017438
517,00 €
www.bsd-dresden.de
Price
Seite 243
other
torque wrench
- adjustable torque wrench
- with ratchet
- calibrated according to ISO 6789,
max. error of measurement +/- 4 %
- delivery with test certificate, licensed through DKD
(Deutscher Kalibrier Dienst) (german calibrate service)
Description
Material number
torque wrench 3/8 inch 8-60 Nm
1316000
181,00 €
Price
torque wrench ½ inch 20-100 Nm
1316020
190,00 €
torque wrench ½ inch 40-200 Nm
1316040
181,00 €
torque wrench
- slim construction, with plastic handles
- interconnect protection through plug-in button
at the end of the handle
- click mechanism with slide rollers for long endurance
- calibrated according to ISO 6789,
max. error of measurement +/- 4 %
- delivery with test certificate, licensed through DKD
(Deutscher Kalibrier Dienst) (german calibrate service)
Description
Material number
torque wrench 3/8 inch 8-70 Nm
1319010
226,00 €
Price
torque wrench ½ inch 10-100 Nm
1317020
144,00 €
torque wrench ½ inch 20-200 Nm
1317030
155,00 €
cotter pin pliers
- for W cotter pins
- made out of steel
- rust protected
- for rabbit-nominal size 11 and 16 mm ø
Description
Material number
cotter pin pliers 180 mm
8154180
www.bsd-dresden.de
Price
57,50 €
Seite 244
rod auger bit
- with crest of thread
- two main cutting edges
- two taper tap
- polished helix with eyelet
- gimlet for softwood
Description
Material number
rod auger bit 18 mm
1324180
26,00 €
Price
rod auger bit 20 mm
1324200
29,00 €
rod auger bit 22 mm
1324220
31,50 €
rod auger bit 24 mm
1324240
35,00 €
rod auger bit 26 mm
1324260
38,00 €
lever tensioning device
- consist of:
- lever tension device
- plate shears
- bend pliers
- hammer
- 100 bails
- for mounting to wooden pole, ferreous pole, concrete pole, alu pole
- for all kind of cross sections (round, triangular, quadratic, oblong, polygonal, ribbed)
Description
Material number
lever tensioning device - set in tool case
8131000
Price
683,00 €
earth scoop
- adjustable chain
- forged, steel
- hole diameter 90 - 200 mm
- with ash handle
Description
Material number
earth scoop 1500 mm lenght
2133000
www.bsd-dresden.de
Price
87,50 €
Seite 245
substitute handle for earth scoop
- straight, out of ash
Description
Material number
substitute handle for earth scoop
2133001
Price
9,27 €
maintenance sign "put not into operation"
- plastic, matt
- 10 pieces per package
Description
Material number
maintenance sign 7,6 x 14,7 cm (10 pieces)
8350055
Price
21,50 €
maintenance sign "do not switch! work is proceeding!"
- plastic, matt
- 10 pieces per package
Description
Material number
maintenance sign 7,6 x 14,7 cm (10 pieces)
8350040
Price
21,50 €
maintenance sign "Be careful! working at the installation"
- plastic, matt
- 10 pieces per package
Description
Material number
maintenance sign 7,6 x 14,7 cm (10 piece)
8350060
www.bsd-dresden.de
Price
21,00 €
Seite 246
instruction sign "5 safety rules"
- plastic
- according to BGV A8
Description
Material number
instruction sign 40,0 x 25,0 cm 5 safety rules
8350045
Price
12,50 €
instruction sign "qualified electrician is ..."
- plastic
- according to BGV A8
Description
Material number
instruction sign 40,0 x 20,0 cm
8350050
Price
12,50 €
danger sign "life danger"
- plastic, yellow
Description
Material number
danger sign 24,4 x 20,0 cm
8350065
Price
10,50 €
danger sign "Attention! Only qualified persons may..."
- plastic, yellow
"Only qualified persons may open the distribution cabinet"
Description
Material number
danger sign 7,4 x 21,0 cm
8350020
www.bsd-dresden.de
Price
3,45 €
Seite 247
danger sign "electrical service room"
- plastic, yellow
Description
Material number
danger sign 29,7 x 21,0 cm
8350010
Price
16,00 €
danger sign "earthed and shorted"
- plastic, yellow
Description
Material number
danger sign 29,7 x 21,0 cm
8350015
Price
16,00 €
danger sign "Attention! earthed and shorted"
- plastic, yellow
Description
Material number
danger sign 7,4 x 21,0 cm
8350070
Price
3,45 €
danger sign "system under voltage"
- plastic, yellow
Description
Material number
danger sign 20,0 x 30,0 cm
8350030
www.bsd-dresden.de
Price
10,00 €
Seite 248
danger sign "Attention! electrical installation ...!"
- plastic, yellow
"Attention! electrical installation, keep access free"
Description
Material number
danger sign 12,0 x 21,0 cm
8350025
Price
5,05 €
danger sign "Attention! high-voltage room!"
- plastic, yellow
Description
Material number
danger sign 35,0 x 25,0 cm
8350035
Price
12,50 €
prohibition sign "do not switch"
- plastic
Description
Material number
prohibition sign d= 20,0 cm
8350075
www.bsd-dresden.de
Price
5,97 €
Seite 249
electric-cabinet key
- stabil construction
- also for MV - switchboards
- and cabinets CSIM, BSIG
- meter box and open switchboards
- listing according to sketch from top to bottom
Description
Material number
electric cabinet key, type 1
8121501
27,50 €
electric cabinet key, type 2
8121601
34,00 €
electric cabinet key, type 3
8121500
28,50 €
electric cabinet key, type 4
8121600
33,00 €
electric cabinet key, type 5
8121502
26,00 €
electric cabinet key, type 6
8121506
28,50 €
electric cabinet key, type 7
8121509
29,50 €
electric cabinet key, type 8
8121507
28,50 €
electric cabinet key with adapter for bits, type 9
8121504
14,50 €
electric cabinet key, type 10
8121505
11,00 €
electric cabinet key, type 11
8121503
28,50 €
electric cabinet key, type 12
8121610
51,00 €
www.bsd-dresden.de
Price
Seite 250
Download