SFOEM Fixed Optics Emergency Light
Technical Specifications
SFOEM
The Simkar SFOEM Fixed Optics Emergency Light is ideal for applications where
economical emergency illumination along the path of egress is desired.
Pr ojec t
C at alog N um ber
Ty pe
D at e
HOUSING Injection-molded, engineering grade, 5VA flame
retardant, high-impact resistant, thermoplastic in white or
black finish.
ILLUMINATION Two fixed optics 5.4W glare-free lamp
heads. Smooth thermoplastic reflector and plastic lens for
optimal light distribution.
ELECTRICAL Dual 120/277V voltage. Charge rate/power
on LED indicator light and push-to-test switch for mandated
code compliance testing. LVD (low voltage disconnect)
prevents battery from deep discharge.
TRANSFER/CHARGING CIRCUITRY Internal solid state
transfer switch automatically connects the internal battery
to LEDs for minimum 90-minute emergency illumination.
Fully automatic solid-state, two-rate charger initiates
battery charging to recharge a discharged battery in 24
hours.
BATTERY 6V maintenance-free, rechargeable sealed lead
acid battery.
MOUNTING Surface mount via easy connect back plate,
which fits most standard junction boxes and snaps into
place making internal electrical connections. Suitable for
wall mount.
LISTINGS Meets UL924, NFPA 101 Life Safety Code, NEC,
OSHA, Local and State Codes. ETL listed for damp locations
32°F (0˚C) – 122°F (50˚C).
WARRANTY 5 year limited warranty on all electronics and
housing. Battery pro-rated for two years.
R
5
YEAR
WARRANTY
BACK PLATE
MOUNT
SFOEM Fixed Optics Emergency Light Configuration
SERIES
SFOEM
HOUSING COLOR
B = Black
W = White
OPTIONS
C4 = 4’ Cord & Plug
C7 = 7’ Cord & Plug
Dimensions
Electrical Information
2⅜”
Model
Input Wattage
(W)
SFOEM
120V
4.0
5⅛”
11 13/16”
FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
121520151555 REV B
(800) 523-3602 • www.simkar.com
277V
5.0
Input Amps (A)
120V
0.045
277V
0.020
Easy Connect Feature
1. Simply pull supply wires in junction box
through the canopy or backplate knockout
2. Secure the canopy or backplate to the
junction box. Wire fixture with both
hands free!
3. Snap the entire fixture right onto the canopy