ASA LASER H, CR, CR-DCR,
KS and CANAVIEIRO
The best subsoilers from Brazil
Virtual catalog | English |Feb/2016
SUBSOILERS ASA
The Asa subsoilers perform the vibrating subsoiling that increases
the decompression between the rows and reduce the required
energy up to 10% in relation to other subsoilers. The decompression
of the soil allows better expand the root system from the plant and
improve the water infiltration.
The Asa Laser preserve the remaining from crops at the surface,
Adjustment screw
The anti-clod roll has an
adjustment screw where the
pressure can be adapted
according to the soil conditions
and the kind of desired finishing.
protecting the soil against the effects of rainwater and from the sun.
It were design to endure the worst work conditions.
The subsoilers Asa are available in the models Asa Laser H, CR,
CR-DCR and Canavieiro (sugar cane).
Adjustment pin
It is responsible for the height adjustment,
limiting the work deepness.
Asa Laser H
Asa Laser Canavieiro
Ideal for subsoiling in small
areas where the manipulation
is frequently needed.
The Asa Laser Canavieiro was developed specifically for heavy works in the sugar cane crops and designed to
break compressions up to 62 cm deep. It has Automatic Disarm system, its discs are independents and adjustable,
dimensioned to cut great volumes of remaining crops.
Rising cylinder
The cylinder is responsible for lowing and
rising the equipment from the ground for
transportation or returning.
Header
The header has height adjustment
to engage it in the tractor.
Roll
The anti-clod and leveler roll with adjustable
pressure eliminates the need to pass with
harrow after the subsoiling, available on the
model Asa CR-DCR. For the model Asa Laser
KS, the leveler roll and anti-clod helps to
permeate the seeds uniformly.
Comparative between two soil preparation systems:
Automatic disarm
LIMING
FERTILIZATION
HARROW
SUBSOILER
Discs
The cutting discs with individual pressure and
height adjustment allows an efficient work in different type of soil and haulm.
Available for the model Asa CR-DCR.
Harrow with plow and seeder
The Automatic Disarm system protects the equipment and the tractor against heavy impacts and you don’t need to change the safety screws.
Harrow with ASA LASER KS
ASA LASER KS
The biggest benefit from the Asa Laser KS is to avoid the soil
reconsolidation. With this, the plants will expand its root system in
a soft soil, occupying rapidly all its profile volume, before the natural
reconsolidation occurs.
The reconsolidation is common in soils where good agronomical
practices are not made, such as crops rotation.
For decreasing some operation as harrow and sowing, the use of the
Asa Laser KS allows an important reduction of costs in implanting new
crops that allows the distribution by throw, such as oat, millet and wheat,
in no tillage areas and brachiaria in pastures.
BARLEY – TILLERING
ASA LASER KS
ASA LASER KS
BARLEY – MAINTENANCE
PLANTER
PLANTER
Seeds box
It has seeds box engaged with capacity
for 225 to 585 liters that performs
the sowing of small seeds in just one
operation.
It establishes the winter coverage in the same operation of subsoiling, avoiding the reconsolidation of the soil
by the traffic of machines after this operation. Therefore, the soil remains ideal to receive the next summer crop.
Technical Especifications
Ideal for sowing winter
crops coverage.
Technical Especifications
Technical Especifications
Model
ASA-H
Number of shanks
5 shanks
7 shanks
9 shanks
Work width
1.90 m
2.66 m
3.42 m
Work deepness
Until 45 cm
*Required power
60 to 90 hp 90 to 130 hp 130 to 160 hp
Weight
847 kg
1.040 kg
675 kg
ASA-CR-DCR
ASA-CR
5 shanks
7 shanks
9 shanks
11 shanks
13 shanks
5 shanks
7 shanks
9 shanks
11 shanks
13 shanks
1.90 m
2.66 m
3.42 m
4.18 m
4.94 m
1.90 m
2.66 m
3.42 m
4.18 m
4.94 m
Until 45 cm
Until 45 cm
80 to 105 hp 105 to 130 hp 130 to 160 hp 160 to 220 hp 220 to 280 hp 80 to 125 hp 105 to 180 hp 130 to 225 hp 160 to 275 hp 220 to 325 hp
1.045 kg
1.404 kg
1.618 kg
1.866 kg
2.170 kg
1.720 kg
*The great variation of power occurs due the variations in the deepness, spacing, compressing and soil moister.
In dry soils and with intense compression, the power required is superior to the power specified and we recommend to cancel the operation.
2.048 kg
2.548 kg
3.173 kg
3.850 kg
Model
Asa Laser KS
Number of shanks
7 shanks
5 shanks
Work width
2.66 m
1.90 m
Work deepness
Until 45 cm Until 45 cm
*Required power
80 to 125 hp 105 to 180 hp
**Weight
2,695 kg
2,130 kg
Seed box capacity
315 l
225 l
Work speed
4 - 7 km/h 4 - 7 km/h
9 shanks
11 shanks
13 shanks
3.42 m
4.18 m
4.94 m
Until 45 cm
Until 45 cm
Until 45 cm
130 to 225 hp 160 to 275 hp 220 to 325 hp
2,936 kg
3,600 kg
4,310 kg
405 l
495 l
585 l
4 - 7 km/h
4 - 7 km/h
4 - 7 km/h
*The great variation of power occurs due the variations in the deepness, spacing,
compressing and soil moister.
In dry soils and with intense compression, the power required is superior to the power
specified and we recommend to cancel the operation.
**The weight is related to the KS Kit and to the subsoiler.
Model
Asa Cana CR-DCR
Number of shanks
5 shanks
7 shanks
Width of work - spacing
2.00 to 2.55 m
2.80 to 3.57 m
Spacing
40/45 and 51 cm
40/45 and 51 cm
Work deepness
30 to 62 cm
30 to 62 cm
Weight
3,340 kg
4,680 kg
Chassis width
2.80 m
3.70 m
Length with roll
6.40 m
6.40 m
Width without roll
5.40 m
5.40 m
Height
1.60 m
1.60 m
Work speed
3 - 6 km/h
3 - 6 km/h
*Required power- tractors with conveyor
100/230 hp
140/320 hp
*Required power - Tractors with tires
160/280 hp
200/320 hp
Tires
10.5/65”x 16”
10.5/65”x 16”
Hydraulic cylinder
2 - Ø 3”
2 - Ø 3”
*The great variation of power occurs due the variations in the
deepness, spacing, compressing and soil moister.
In dry soils and with intense compression, the power required is
superior to the power specified and we recommend to cancel the
operation.
**The weight is related to the KS Kit and to the subsoiler.