Insulated Gate Bipolar Transistor

advertisement
Order this document
by MGW20N120/D
SEMICONDUCTOR TECHNICAL DATA
 Motorola Preferred Device
N–Channel Enhancement–Mode Silicon Gate
This Insulated Gate Bipolar Transistor (IGBT) uses an advanced
termination scheme to provide an enhanced and reliable high
voltage–blocking capability. Short circuit rated IGBT’s are specifically suited for applications requiring a guaranteed short circuit
withstand time. Fast switching characteristics result in efficient
operation at high frequencies.
IGBT IN TO–247
20 A @ 90°C
28 A @ 25°C
1200 VOLTS
SHORT CIRCUIT RATED
• Industry Standard High Power TO–247 Package with
Isolated Mounting Hole
• High Speed Eoff: 160 J/A typical at 125°C
• High Short Circuit Capability – 10 s minimum
• Robust High Voltage Termination
C
G
G
E
C
E
CASE 340K–01
STYLE 4
TO–247AE
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
VCES
1200
Vdc
Collector–Gate Voltage (RGE = 1.0 MΩ)
VCGR
1200
Vdc
Gate–Emitter Voltage — Continuous
VGE
±20
Vdc
Collector Current — Continuous @ TC = 25°C
— Continuous @ TC = 90°C
— Repetitive Pulsed Current (1)
IC25
IC90
ICM
28
20
56
Adc
PD
174
1.39
Watts
W/°C
TJ, Tstg
– 55 to 150
°C
tsc
10
s
RθJC
RθJA
0.7
35
°C/W
TL
260
°C
Total Power Dissipation @ TC = 25°C
Derate above 25°C
Operating and Storage Junction Temperature Range
Short Circuit Withstand Time
(VCC = 720 Vdc, VGE = 15 Vdc, TJ = 125°C, RG = 20 Ω)
Thermal Resistance — Junction to Case – IGBT
— Junction to Ambient
Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 5 seconds
Mounting Torque, 6–32 or M3 screw
Apk
10 lbfSin (1.13 NSm)
(1) Pulse width is limited by maximum junction temperature. Repetitive rating.
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Designer’s is a trademark of Motorola, Inc.
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 1
IGBT
 Motorola
Motorola, Inc.
1997 Device
Data
1
MGW20N120
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
1200
—
—
870
—
—
mV/°C
25
—
—
Vdc
—
—
—
—
100
2500
—
—
250
—
—
—
2.42
2.36
2.90
3.54
—
4.99
4.0
—
6.0
10
8.0
—
mV/°C
gfe
—
12
—
Mhos
pF
OFF CHARACTERISTICS
Collector–to–Emitter Breakdown Voltage
(VGE = 0 Vdc, IC = 25 µAdc)
Temperature Coefficient (Positive)
V(BR)CES
Emitter–to–Collector Breakdown Voltage (VGE = 0 Vdc, IEC = 100 mAdc)
V(BR)ECS
Zero Gate Voltage Collector Current
(VCE = 1200 Vdc, VGE = 0 Vdc)
(VCE = 1200 Vdc, VGE = 0 Vdc, TJ = 125°C)
ICES
Gate–Body Leakage Current (VGE = ± 20 Vdc, VCE = 0 Vdc)
IGES
Vdc
µAdc
nAdc
ON CHARACTERISTICS (1)
Collector–to–Emitter On–State Voltage
(VGE = 15 Vdc, IC = 10 Adc)
(VGE = 15 Vdc, IC = 10 Adc, TJ = 125°C)
(VGE = 15 Vdc, IC = 20 Adc)
VCE(on)
Gate Threshold Voltage
(VCE = VGE, IC = 1.0 mAdc)
Threshold Temperature Coefficient (Negative)
VGE(th)
Forward Transconductance (VCE = 10 Vdc, IC = 20 Adc)
Vdc
Vdc
DYNAMIC CHARACTERISTICS
Input Capacitance
Output Capacitance
(VCE = 25 Vdc,
Vdc VGE = 0 Vdc,
Vdc
f = 1.0 MHz)
Transfer Capacitance
Cies
—
1860
—
Coes
—
122
—
Cres
—
29
—
td(on)
—
88
—
tr
—
103
—
td(off)
—
190
—
tf
—
284
—
Eoff
—
1.65
2.75
mJ
td(on)
—
83
—
ns
tr
—
107
—
td(off)
—
216
—
tf
—
494
—
Eoff
—
3.19
—
mJ
QT
—
62
—
nC
Q1
—
21
—
Q2
—
25
—
—
13
—
SWITCHING CHARACTERISTICS (1)
Turn–On Delay Time
Rise Time
Turn–Off Delay Time
Fall Time
(VCC = 720 Vdc,
Vd IC = 20 Ad
Adc,
VGE = 15 Vdc,
Vd L = 300 mH
RG = 20 Ω)
Energy losses include “tail”
Turn–Off Switching Loss
Turn–On Delay Time
Rise Time
Turn–Off Delay Time
Fall Time
(VCC = 720 Vdc,
Vd IC = 20 Ad
Adc,
Vd L = 300 mH
VGE = 15 Vdc,
RG = 20 Ω, TJ = 125°C)
125 C)
Energy losses include “tail”
Turn–Off Switching Loss
Gate Charge
(VCC = 720 Vdc,
Vdc IC = 20 Adc
Adc,
VGE = 15 Vdc)
ns
INTERNAL PACKAGE INDUCTANCE
Internal Emitter Inductance
(Measured from the emitter lead 0.25″ from package to emitter bond pad)
LE
nH
(1) Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%.
2
Motorola IGBT Device Data
MGW20N120
TYPICAL ELECTRICAL CHARACTERISTICS
IC, COLLECTOR CURRENT (AMPS)
60
VGE = 20 V
TJ = 25°C
50
17.5 V
40
12.5 V
30
20
10 V
10
0
0
2
4
6
50
40
12.5 V
30
10 V
20
10
0
8
0
40
20
7
8
9
25°C
10
11
12
13
14
15
VCE , COLLECTOR–TO–EMITTER VOLTAGE (VOLTS)
IC, COLLECTOR CURRENT (AMPS)
VCE = 10 V
250 µs PULSE WIDTH
6
IC = 20 A
3
15 A
10 A
2
1
– 50
0
C, CAPACITANCE (pF)
VGE, GATE–TO–EMITTER VOLTAGE (VOLTS)
TJ = 25°C
VGE = 0 V
Coes
Cres
10
10
15
20
VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS)
Figure 5. Capacitance Variation
Motorola IGBT Device Data
100
150
Figure 4. Collector–to–Emitter Saturation
Voltage versus Junction Temperature
1000
5
50
TJ, JUNCTION TEMPERATURE (°C)
10,000
0
8
VGE = 15 V
250 µs PULSE WIDTH
Figure 3. Transfer Characteristics
100
6
4
VGE, GATE–TO–EMITTER VOLTAGE (VOLTS)
Cies
4
Figure 2. Output Characteristics
60
5
2
VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS)
Figure 1. Output Characteristics
0
15 V
17.5 V
VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS)
TJ = 125°C
VGE = 20 V
TJ = 125°C
15 V
IC, COLLECTOR CURRENT (AMPS)
60
25
16
QT
14
12
10
Q1
8
Q2
6
TJ = 25°C
IC = 20 A
4
2
0
0
10
20
30
40
50
60
70
Qg, TOTAL GATE CHARGE (nC)
Figure 6. Gate–to–Emitter Voltage versus
Total Charge
3
MGW20N120
IC, COLLECTOR CURRENT (AMPS)
100
10
1
VGE = 15 V
RGE = 20 Ω
TJ = 125°C
0.1
1
10
100
1000
10,000
VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS)
Figure 7. Reverse Biased
Safe Operating Area
1.0
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
D = 0.5
0.2
0.1
0.1
0.05
P(pk)
0.02
0.01
t1
SINGLE PULSE
t2
DUTY CYCLE, D = t1/t2
0.01
1.0E–05
1.0E–04
1.0E–03
1.0E–02
1.0E–01
RθJC(t) = r(t) RθJC
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
TJ(pk) – TC = P(pk) RθJC(t)
1.0E+00
1.0E+01
t, TIME (s)
Figure 8. Thermal Response
4
Motorola IGBT Device Data
MGW20N120
PACKAGE DIMENSIONS
0.25 (0.010)
M
–T–
–Q–
T B M
E
–B–
C
4
L
U
A
R
1
K
2
3
–Y–
P
V
H
F
G
D
0.25 (0.010)
M
Y Q
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
DIM
A
B
C
D
E
F
G
H
J
K
L
P
Q
R
U
V
MILLIMETERS
MIN
MAX
19.7
20.3
15.3
15.9
4.7
5.3
1.0
1.4
1.27 REF
2.0
2.4
5.5 BSC
2.2
2.6
0.4
0.8
14.2
14.8
5.5 NOM
3.7
4.3
3.55
3.65
5.0 NOM
5.5 BSC
3.0
3.4
INCHES
MIN
MAX
0.776
0.799
0.602
0.626
0.185
0.209
0.039
0.055
0.050 REF
0.079
0.094
0.216 BSC
0.087
0.102
0.016
0.031
0.559
0.583
0.217 NOM
0.146
0.169
0.140
0.144
0.197 NOM
0.217 BSC
0.118
0.134
S
CASE 340K–01
TO–247AE
ISSUE A
STYLE 4:
PIN 1.
2.
3.
4.
GATE
COLLECTOR
EMITTER
COLLECTOR
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141,
4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 1–602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
Motorola IGBT Device Data
◊
MGW20N120/D
5
Download