5C EFS Factory Sealed Selector Switches

advertisement
2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
100:
JOB: CRMAIN06-0438-2 Name: 5C-438
5C
DATE: JAN 19 2006
Time: 5:25:15 PM Operator: RB
COLOR: CMYK
TCP: 15001
Typedriver Name: TS name csm no.: 100
Cl. I, Div. 1 & 2, Groups B*,C,D
Cl. II, Div. 1, Groups E,F,G
Cl. II, Div. 2, Groups F,G
Cl. III
NEMA 3,7B*CD,9EFG
EFS Factory Sealed
Selector Switches
Maintained Contact, 600VAC Heavy
Duty, Dimensions Pg. 430
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Furnished with pushbuttons, cam actuated
by a maintained contact selector mechanism
to operate in the sequences shown in the
diagrams below. Specify indicating plate
markings. See table below listings.
EFS11271
EFS11273
Single Gang
Enclosure With Switch
Replacement
Contact
Blocks†
Hub
Size
Dead End
Cat. #
Through Feed
Cat. #
TwoPosition,
TwoCircuit
ED11
1⁄2
3⁄4
EFS11271
EFS21271
EFS31271
EFSC11271
EFSC21271
EFSC31271
TwoPosition,
FourCircuit
ED12
EFS11272
EFS21272
EFS31272
EFSC11272
EFSC21272
EFSC31272
EFS11273
EFS21273
EFS31273
EFSC11273
EFSC21273
EFSC31273
EFS11274
EFS21274
EFS31274
EFSC11274
EFSC21274
EFSC31274
EFS11275
EFS21275
EFS31275
EFSC11275
EFSC21275
EFSC31275
Style
Position
1
Position
2
Position
3
1
1⁄2
3⁄4
1
ThreePosition,
TwoCircuit
ED11
1⁄2
3⁄4
1
ThreePosition,
FourCircuit
ED12
ED12
1⁄2
3⁄4
1
1⁄2
3⁄4
1
Standard indicating plate markings available are as follows:
Two-Position
RUN, JOG
FAST, SLOW
IN, OUT
HAND, AUTOMATIC
OPEN, CLOSE
RAISE, LOWER
FORWARD, REVERSE
UP, DOWN
START, STOP
ON, OFF
Three-Position
RUN, OFF, JOG
1, OFF, 2
HAND, OFF, AUTOMATIC
OPEN, OFF, CLOSE
FORWARD, OFF, REVERSE
UP, OFF, DOWN
FAST, OFF, SLOW
* Class I, Group B: All enclosures listed above are suitable
for Class I, Group B, Div. 1 usage. Seals only have to be
installed on 1 inch conduit within 5 ft. in Division 1.
† For replacement contact blocks see page 400.
438
STIBOINFO((CRH:66008com:5C:438))
CH0 5 C- 1 3
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Zoom: 100
2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
JOB: CRMAIN06-0428-6 Name: 5C-428
5C
100:
DATE: JAN 19 2006
Time: 5:25:03 PM Operator: GK COLOR: CMYK
Dimensions Pg. 430
Factory sealed enclosures are installed in a
rigid metallic conduit system for surface
mounting adjacent to or remote from
equipment being controlled and are used:
ɀ to prevent arcing of enclosed device from
causing ignition of a specific hazardous
atmosphere or atmospheres external to the
enclosure
ɀ in industrial areas such as chemical plants,
oil and gas refineries, paint and varnish
manufacturing plants, gasoline bulk loading
terminals, grain elevators, grain processing
industries, coal processing or handling areas,
or metal handling or finishing areas where
atmosphere may contain hazardous gases
and/or dust
ɀ in non-hazardous areas where sturdy,
durable enclosures are required
ɀ in conjunction with magnetic starters or
contactors for remote control of motors
Manual motor starting switch enclosures are
used:
ɀ for manual starting of small ac or dc motors
ɀ to provide manual starting and stopping
and, in the case of units with heaters, motor
running protection
Features:
Factory sealed devices have many distinct
advantages:
ɀ reduce installation problems
ɀ eliminate external seals
ɀ lower installation costs
ɀ improve safety
ɀ are used with general purpose snap and
pushbutton type switches
ɀ standard neoprene covers for front
operated pushbuttons. Prevents
accumulation of dirt and entrance of water
around operating shafts
ɀ mounting lugs and taper tapped hubs with
integral bushings
ɀ large machine screws for fastening covers
to bodies
ɀ lockout provisions on front operated push
button (marked ‘‘STOP’’ and ‘‘OFF’’) and
selector switch covers
ɀ lockout hole for padlock having 1⁄4⍯ hasp is
provided when used with covers for front
lever and side rocker type operation
ɀ close tolerances in machining of wide,
mating flanges and journalled shafts and
bearings for front button operation, produces
flametightness of enclosure joints
ɀ on enclosures with front lever and side
rocker type operating handles, threaded type
shafts and bushings are used to ensure
flametightness
ɀ dead end (EFS or EDS) or through feed
(EFSC or EDSC) hubs – 1⁄2⍯ to 1⍯ sizes
ɀ Shafts – stainless steel
ɀ Shaft bushings – stainless steel
ɀ Rocker handle and pushbutton guards –
type 6/6 nylon
ɀ Sealing enclosures – copper-free aluminum
Standard Finishes:
Feraloy iron alloy – electrogalvanized and
aluminum acrylic paint
ɀ Copper-free aluminum – natural
ɀ Type 6/6 nylon – black
ɀ Stainless steel – natural
ɀ NEC/CEC:
Class I, Division 1 & 2, Groups B*,C,D
Class II, Division 1, Groups E,F,G
Class II, Division 2, Groups F,G
Class III
ɀ NEMA/EEMAC: 3,7B*CD,9EFG
ɀ UL Standard: 894, 698
ɀ CSA Standard: C22.2 No. 30
Options:
The following special options are available
from the factory by adding suffix to Cat. No.
Suffix to be
Added to
Cat. #
Description
Emergency ‘‘Stop’’ button (momentary) – front operated red mushroom button . . . . . . . . . . S111
Lockout provision on front operated pushbutton cover (standard on buttons
marked ‘‘OFF’’ and ‘‘STOP’’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S153
For 24 VDC operation on pilot lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S300
Three-position selector switches with modified operation:
Momentary contact clockwise operation, spring return to center, maintained
contact counter-clockwise operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S634
Momentary contact counter-clockwise operation, spring return to center,
maintained contact clockwise operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S635
Bodies and covers (single and two gang units) – copper-free aluminum. . . . . . . . . . . . . . . . . . . SA
Where indicated in the catalog listings, EDS units suitable for Class I, Division 1,
Group B usage can be supplied, add suffix - GB, EFS units are suitable for Class I, Division 1,
Group B as standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB
Maintained contact mushroom head with lockout and guard. Maximum one per cover
and cannot be used with a pilot light with a transformer or another standard pushbutton.. . S769
EDS bodies and factory sealed cover and device sub-assemblies are available for field
assembly (see pages 394 to 396).
ɀ Bodies – Feraloy® iron alloy; copper-free
aluminum.
ɀ Front operated pushbutton and pilot light
covers – Feraloy iron alloy
ɀ Side operated type pushbutton covers –
copper-free aluminum
STIBOINFO((CRH:66008com:5C:428))
CH0 0 5 C- 0
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Certifications and
Compliances:
Suffix S769
Standard Materials:
428
Typedriver Name: TS name csm no.: 100
Cl. I, Div. 1 & 2, Groups B*,C,D
Cl. II, Div. 1, Groups E,F,G
Cl. II, Div. 2, Groups F,G
Cl. III
NEMA 3,7B*CD,9EFG
EFS and EDS Factory Sealed
Control Devices and Manual
Motor Starting Switches
Application:
TCP: 15001
US: 1-866-764-5454
* See Options: suffix GB
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Zoom: 100
Download