Now You Are Free to Choose Gearmotors and Reducers Based on Easy Fit and Selection Introducing Series 7000 — Helical, In-line, Enclosed Gearmotors and Speed Reducers Emerson Power Transmission now offers you a complete interchange solution for SEWEurodrive* and other European style modular, in-line helical gear drives. Introducing the Browning® Series 7000 — a full line of enclosed gearmotors and speed reducers, designed with a broad range of standard input configurations to adapt to most in-line, helical applications. Series 7000 empowers you to choose gearmotor and reducer products, based on ease of selection and ease of use. Series 7000 utilizes the same motors available on all modular gearmotors from Emerson Power Transmission. This includes the industry’s widest variety of gearmotor enclosures and types, including Corro-Duty® Cast Iron, explosionproof, inverter duty (NEMA MG1, part 31 compliant), premium efficiency and more. In addition, the Series 7000 is assembled-to-order for ready availability in a multitude of arrangements. *SEW-Eurodrive is a trademark and/or a trade name of SEW-Eurodrive GMBH & Co., *Dodge Quantis is a trademark and/or a trade name of Reliance Electric Company, *Falk Ultramite is a trademark and/or a trade name of The Falk Corporation, *Boston Gear is a trademark and/or a trade name of IMO Industries, *Nordbloc is a trademark and/or a trade name of Nord Gear Corporation, *Flender is a trademark and/or a trade name of A. Friedr. Flender GMBH, *Leeson is a trademark and/or a trade name of Leeson Electric Corporation. ** The terms David Brown/Cone are used in this brochure for product comparison purposes only and they are not trademarks of Emerson Power Transmission or Emerson Power Transmission Manufacturing, L.P. These trade names, trademarks and/or registered trademarks of others are used herein for product comparison purposes only, are the property of their respective owners and are not owned or controlled by Emerson Power Transmission Corporation. Emerson Power Transmission does not represent or warrant the accuracy of this document. The Emerson logo is a trademark and a service mark of Emerson Electric Co. © Emerson Power Transmission Manufacturing, L. P. or affiliates 2004. All Rights Reserved. More Complete Interchange • Direct interchange with SEW-Eurodrive* and other European style modular in-line helical gear drives, making it highly flexible for adaptation to application requirements • Simple, size-for-size, drop-in replacement for many, widely used brands – Dodge Quantis*, Falk Ultramite*, Boston Gear 800 Series*, David Brown/Cone**, Sterling*, Nordbloc*, Flender* and Leeson* Industrial Grade Cast Iron • Unlike some competitive units that utilize aluminum housings, the Series 7000 is industrial-grade – all gear housings are manufactured from cast iron • Long lasting durability in wet, corrosive environments • Units withstand heavy shock and overhung loads for lower maintenance in more severe environments • The Corro-Duty motor ends are all cast iron (rolled steel in 56/140T frames), while some competitors’ similar motors have aluminum frames *SEW-Eurodrive is a trademark and/or a trade name of SEW-Eurodrive GMBH & Co., *Dodge Quantis is a trademark and/or a trade name of Reliance Electric Company, *Falk Ultramite is a trademark and/or a trade name of The Falk Corporation, *Boston Gear is a trademark and/or a trade name of IMO Industries, *Nordbloc is a trademark and/or a trade name of Nord Gear Corporation, *Flender is a trademark and/or a trade name of A. Friedr. Flender GMBH, *Leeson is a trademark and/or a trade name of Leeson Electric Corporation. ** The terms David Brown/Cone are used in this brochure for product comparison purposes only and they are not trademarks of Emerson Power Transmission or Emerson Power Transmission Manufacturing, L.P. These trade names, trademarks and/or registered trademarks of others are used herein for product comparison purposes only, are the property of their respective owners and are not owned or controlled by Emerson Power Transmission Corporation. Emerson Power Transmission does not represent or warrant the accuracy of this document. 1 Widest Variety of Standard Configurations and Motor Types Emerson Power Transmission offers the widest variety of standard configurations and motor types available in gearmotors, assembled-to-order for quick delivery and minimized downtime. Broadest Line of Motor Ends • TEFC • Explosionproof • Corro-Duty • Inverter duty • Brake motors 2 The New Quill Style “C-Face” C-Face reducers utilize compact quill construction with two bearings for support and a non-metallic liner to eliminate fretting. • Eliminates coupling wear and replacement • Shortens overall length • Allows use with DC and servo motors with like diameters • Transmits torque through metal key and keyway Scoop mount Top mount 3 Industry’s Highest Overall Torque Rating • Rule of thumb – if the dimensions and ratio match, the torque and hp ratings are where they should be (review catalog for actual ratings) • Advanced gearing design gives Browning the highest overall torque density per frame size in the industry • When replacing older series competitive units, the Series 7000 line has 20 to 50 percent higher torque capacity so a replacement often lasts longer than the original unit sized by the OEM • For maximum durability, specify Series 7000 for your replacement gearbox Highly Modular • Patented, modular, taper connection so that one spare of each motor hp size in the plant will allow replacement of that hp on any frame size of the Series 7000 gearmotor – so users can keep fewer spares in stock • Taper connection makes motor replacement easy, eliminating the need for draining the oil or breaking open the gearcase Innovative, self-locking, tapered shaft connection between motor and shaft. 4 Easy to Select — Find Products Quickly! Four easy ways to choose the product you need: 1. 2. Logon to Smart Interchange. (www.emerson-ept.com). Use our automated, crossreference tool (available on CD or via email). Smart Interchange is an online tool that makes it easy and efficient for distributors to select the Browning Series 7000 units for replacement of competitive units. Located at www.emerson-ept.com, Smart Interchange takes you through an interactive, step-by-step selection procedure using data from a competitor’s nameplate – almost like having an application engineer on your PC. 3. Use the Series 7000 “Selection Cross Reference” below. 4. Call Emerson Application Engineering at 1-800-626-2120. Browning Series 7000 Selection Cross Reference Manufacturer Browning SEW* Dodge* Falk* Nord* Boston* Ultramite* Nordbloc* 800 Series 03** SK322** SK17 SK27 SK37 SK47 SK57 SK67 SK77 SK87 SK97 83** David Brown/Cone** Product Name Series 7000 71 72 73 74 75 76 77 78 79 Pre "7" "7" Series Quantis* 32*** 40 42/43 60/62/63 70/72/73 80/82/83 92/93 17 27 37 47 57 67 77 87 97 38 48 48† 04 06 68 88 108 07 08 09 "M" Series M03** 84 86 M04 M06 87 M07 M08†† M09 M0122/M0132 M0222/M0232 M0322/M0332 M0422/M0432 M0522/M0532 M0622/M0632 M0722/M0732 M0822/M0832 M0921/M0931 Note: Items highlighted are not available as reducers. *SEW Eurodrive is a trademark and/or a trade name of SEW-Eurodrive GMBH & Co., *Dodge Quantis is a trademark and/or a trade name of Reliance Electric Company, *Falk Ultramite is a trademark and/or a trade name of The Falk Corporation, *Nord Nordbloc is a trademark and/or a trade name of Nord Gear Corporation, *Boston is a trademark and/or a trade name of IMO Industries Inc. ** The terms David Brown/Cone are used in this brochure for product comparison purposes only and they are not trademarks of Emerson Power Transmission or Emerson Power Transmission Manufacturing, L.P. These trade names, trademarks and/or registered trademarks of others are used herein for product comparison purposes only, are the property of their respective owners and are not owned or controlled by Emerson Power Transmission Corporation. Emerson Power Transmission does not represent or warrant the accuracy of this document. *** The dimensions of these sizes are not directly interchangeable with BC71, although ratings are covered. † HB48 with oversized shaft option (1.375” dia.). †† Output shaft size doesn’t match. Easy to Install • Extremely simple to install during replacement – critical dimensions have been sized to provide a mounting of the Series 7000 that is identical to other common brands 5 Series 7000 In-line Helical Gearmotors and Speed Reducers S7000 Gearmotor S7000 C-Face S7000 Input Shaft S7000 Top Mount S7000 Scoop Mount 6 Mounting Versatility Concentric SERIES and Size Range 7000 Gearmotors 1/6 - 40 HP Foot Mount 2, 3 stages Frames 71 – 79 Max. 26,500 in. lbs. Foot Mount 4, 5 stages Frames 74 – 79 Max. 27,500 in. lbs. Variable Speed IntelliGear 1/3 - 10 HP NEMA C-Face 56C to 326TC Frames 71 – 79 C-Face Motors Frames 56 - 326TC Backstop Option Frames 72– 79** Scoop Mount Frames 74 - 79* 56 to 286T Input Shaft Frames 71– 79 Top Mount Frames 74 - 79* 56 to 326T * 2 and 3 stages only. ** 4 and 5 stages, size 78 and 79 only. For one stage, flange mount or larger sizes up to 150,000 lb. in., refer to USGM CbN Series 2000/3000 in catalog CbN-04. 8 Experience the Power of EPT Edge® Online EPT Edge Online is our online technical support center. Also available "24-7-365," these electronic tools provide for efficient drive design and product selection: Q eCatalog (an industry first) - an interactive, robust electronic database with over 100,000 part numbers Q Product Selection (an industry first) - selection tools with extensive engineering efficiency benefits Q Smart Interchange - a dynamic tool that provides an intelligent interchange for competitive parts Q Media Library - electronically (PDF) viewable paper catalogs and documents and downloadable installation and maintenance instructions Q CAD - an online service that allows users to view and upload a 2D or 3D CAD template drawing in a number of customer-compatible formats to be integrated into users' AutoCAD drawings (release 12 or newer) www.emerson-ept.com Connect Here To Be Part of Something Bigger 100 Concentric SERIES 7000 Concentric Helical In-line Series 7000 Speed Reducer Features... 4 3 6 4 2 5 1 Design Features 1. 2. Gear reducers are delivered factory-filled with synthetic hydrocarbon lubricant. Cast iron, one-piece housing/endshield construction provides added strength and rigidity and corrosion resistance. 3. Series 7000 c-face reducers utilize compact quill construction with two bearings for support and the quill has a non-metallic liner to eliminate fretting. 4. Oversized plugs and magnetic drain plug make normal maintenance easier (gear frames 72-79 only). A normally closed breather is standard for sizes 72 through 79 to prevent contamination of lubricant. 5. All gears are keyed to shafts and finished to provide quiet operation. Gears made of 8620 heat treated, nickel chromium molybdenum steel, heat treated to 58-62 RC. 6. Oversized bearings are used for longer life. 101 Speed Reducers Concentric SERIES 7000 Table of Contents Section Page Mounting Versatility and Size Range ............................................................................................................... 104 Reducer Selection .................................................................................................................................... 105-106 Catalog Nomenclature ..................................................................................................................................... 107 Overhung Load Capacities .............................................................................................................................. 108 AGMA Application Tables .......................................................................................................................... 109-111 Mounting Positions ........................................................................................................................................... 112 Lubrication ................................................................................................................................................ 113-114 Reducer Selection Tables ......................................................................................................................... 116-133 Speed Reducer Thermal Power Ratings ......................................................................................................... 134 Modifications .................................................................................................................................................... 135 Dimension Prints (inch) C-Face Reducers - Footed ................................................................................................................. 136-138 Scoop Mount Reducers - Footed .............................................................................................................. 139 Input Shaft Reducers - Footed ........................................................................................................... 140-142 Top Mount Reducers - Footed ................................................................................................................... 143 Gear Reducers - Flanged .......................................................................................................................... 144 Dimension Print Supplements Metric Output Shafts ................................................................................................................................. 145 Reducer Weights ............................................................................................................................................. 146 NEMA Standard Dimensions ........................................................................................................................... 157 Standard Terms and Conditions of Sale .......................................................................................................... 160 102 Speed Reducers Concentric SERIES 7000 C-Face Top Mount Input Shaft 103 Speed Reducers Concentric SERIES Mounting Versatility and Size Range Foot Mount 2, 3 stages Frames 71 – 79 Max. 26,500 in. lbs. NEMA C-Face 56C to 326TC Frames 71 – 79 7000 C-Face Motors Frames 56 - 326TC Backstop Option Frames 72-79** Scoop Mount Frames 74 - 79* 56 to 286T Foot Mount 4, 5 stages Frames 74 – 79 Max. 27,500 in. lbs. Input Shaft Frames 71 – 79 Top Mount Frames 74 - 79* 56 to 326T * 2 and 3 stages only. ** 4 and 5 stages, size 78 and 79 only. For one stage, flange mount or larger sizes up to 150,000 lb. in., refer to USGM CbN Series 2000/3000 in catalog CbN-04. 104 Concentric Speed Reducers SERIES Selection 1. Dimensional interchange method: • Match the dimensions of a competitive unit. • For a unit of the same output speed and the same horsepower input, the ratings of the same physical size unit will be sufficient for replacement. • Competitive brands suitable for replacement in this manner: • SEW-Eurodrive* “R” Series • Dodge Quantis* • Falk* Ultramite • Nord* Nordbloc • David Brown/Cone** “M” Series • Boston Gear* 800 Series • Flender* • Sterling* • Leeson* 7000 3. Select the input type: • The input type may be selected to match the original unit that is being replaced. The choices are gearmotor, c-face, input shaft, top mount (frames 74-79 only), or scoop mount (frames 74-79 only). • The input style may be changed if desired, since this has no effect on ratings. For example, the user may decide to replace a gearmotor with a c-face reducer and motor. 2. Refer to the table below for dimensional interchanges: Manufacturer Browning SEW* Dodge* Falk* Nord* Boston* David Brown/Cone** Ultramite* Nordbloc* 800 Series "M" Series 03** SK322** SK17 SK27 SK37 SK47 SK57 SK67 SK77 SK87 SK97 83** Product Name Series 7000 71 72 73 74 75 76 77 78 79 Pre "7" "7" Series Quantis* 32*** 40 42/43 60/62/63 70/72/73 80/82/83 92/93 17 27 37 47 57 67 77 87 97 38 48 48† 04 06 68 88 108 07 08 09 M03** 84 86 M04 M06 87 M07 M08†† M09 M0122/M0132 M0222/M0232 M0322/M0332 M0422/M0432 M0522/M0532 M0622/M0632 M0722/M0732 M0822/M0832 M0921/M0931 *SEW Eurodrive is a trademark and/or a trade name of SEW-Eurodrive GMBH & Co., *Dodge Quantis is a trademark and/or a trade name of Reliance Electric Company, *Falk Ultramite is a trademark and/or a trade name of The Falk Corporation, *Nord Nordbloc is a trademark and/or a trade name of Nord Gear Corporation, *Boston is a trademark and/or a trade name of IMO Industries Inc. ** The terms David Brown/Cone are used in this brochure for product comparison purposes only and they are not trademarks of Emerson Power Transmission or Emerson Power Transmission Manufacturing, L.P. These trade names, trademarks and/or registered trademarks of others are used herein for product comparison purposes only, are the property of their respective owners and are not owned or controlled by Emerson Power Transmission Corporation. Emerson Power Transmission does not represent or warrant the accuracy of this document. *** The dimensions of these sizes are not directly interchangeable with BC71, although ratings are covered. † HB48 with oversized shaft option (1.375” dia.). †† Output shaft size doesn’t match. 105 Concentric Speed Reducers SERIES Selection Selection Information 1. Input HP Size Selection (cont.) Step 4 • Based on application data. • Verify overhung load ratings where required (see page 108). 2. Speed/Ratio • Obtain either desired output speed (RPM) or gearbox ratio based on application. 3. Service Factor • Determine the required service factor using either the AGMA application classification chart (pages 109-111), or the duration of operation, load type, and drive type with the table below: PRIME MOVER Electric Motor Internal Combustion Engine HOURS OF OPERATION UNIFORM LOAD U 0-3 3 - 10 10 - 24 0-3 3 - 10 10 - 24 0.80 1.00 1.25 1.00 1.25 1.50 MODERATE HEAVY SHOCK SHOCK LOAD LOAD M V 1.00 1.50 1.25 1.75 1.50 2.00 1.25 1.75 1.50 2.00 1.75 2.25 Size Selection Example 1. Application Data Rotary lobe pump, 10+ hours per day, speed reducer direct coupled to load, foot mounted, 1.25 service factor. Motor rating: TEFC, 230/460 volt, 7 1/2 HP, 1750 RPM, 213TC frame footless. Output speed: 280 RPM 2. Size Selection 280 RPM required output Equals 6.3:1 ratio PM • SF = P 7.5 HP x 1.25 = 9.4 HP Step 1 • Locate speed reducer selection tables (pages 116133) based on input speed to gearbox. Step 2 • Choose the nominal ratio appropriate for the speeds required. Step 3 • Select the gear unit size for the chosen ratio and the known input speed so that the mechanical power rating P (hp) satisfies the following: P ≥ Pm • SF P = mechanical power rating (hp) of gearbox Pm = motor power (hp) SF = required service factor Note: Size selection based on absorbed power (Pa) or absorbed torque (Ta) at the low speed shaft instead of motor power (Pm) is allowed when the former is known with sufficient accuracy and if the number of start operations is limited. When Ta is applied in size selection, verify if: T ≥ Ta • SF T = torque rating (in. lbs.) at low speed shaft Ta = absorbed torque (in. lbs.) at low speed shaft SF = required service factor 106 7000 6.1 7502 Example 10.45 2208 7502 (10.45 HP) ≥ 9.4 pg. 117 Select BC 7502 (There are no thermal or OHL considerations.) 3. Catalog Designation (see "ordering" page 107) BC • 7502 • S • B3 • 6.3 • U • 213TC 4. Motor Model Number Refer to motor catalog for complete motor selection, dimensions and characteristics. Concentric Speed Reducers SERIES Catalog Nomenclature BC • 7 1 0 2• S • B3 • 40 • See next page prior to ordering Gear Series Frame 7 = 7000 Number of Reductions Mounting Configuration and Shaft of Gear 1 02 or 12 = 2 stages S = Footed (inch shaft)*** 2 03 = 3 stages SM = Footed (metric shaft)*** 3 04 = 4 stages SBS = Footed flange mount (inch shaft)** 4 05 = 5 stages SBSM = Footed flange mount (metric shaft)** 5 SBD1 = Alt. footed flange mount (inch shaft)** 6 SBDM1 = Alt. footed flange mount (metric shaft)** U • 7000 143TC See next page prior to ordering Mounting Position See page 112 Nom. Gear Ratio Gear Input Determine AP = Input shaft from selection AD = Input shaft pages w/backstop* SP = Scoop mount 7 SD = Scoop mount w/backstop* Motor Frame Req'd for any order for c-face or scoop reducer U = C-face UD = C-face w/backstop* 8 TM = Top mount 9 TD = Top mount w/backstop* * For units with backstops, specify output shaft rotation. ** Frame 71 Only. *** Frame 71 footed S/SM units include a B14 output face standard. 107 Concentric Speed Reducers SERIES Overhung Load Capacities When a sprocket, sheave, pulley or pinion is mounted on any shaft of a reducer, it is necessary to calculate the overhung load. This calculated load must be compared with the gearbox capacity listed to make sure the gearbox will not be overloaded. To calculate the overhung load you need to know the torque or horsepower at the take-off shaft and the location along the shaft at which the load is applied. A. If torque is known: OHL = Where: OHL = Overhung load (pounds) T = Torque (in. lbs.) r = Radius of driving member (in.) HP = Horsepower K = Drive type factor LLF = Load location factor DRIVING MEMBER Chain Drive Pinion Timing Belt V-Belt Flat Belt T x K x LLF r B. If horsepower is known: OHL = 63025 x HP x K x LLF RPM x r OHL capacities are calculated at gear capacity rounded to the closest motor HP at mid shaft. For capacity when HP is known, refer to gearmotor selection tables. 7000 VALUE OF K 1.00 1.25 1.25 1.50 2.50 LOAD LOCATION End of shaft extension Center of shaft extension Shaft extension shoulder VALUE OF LLF 1.20 1.00 0.80 Overhung Load (lbs.) Output R.P.M. 301-450 SIZE 71 72 73 74 75 76 77 78 79 - 349 349 546 466 1259 1001 1591 1915 201-300 - 452 421 633 545 1507 1143 1825 1976 151-200 230 474 492 719 633 1690 1281 1910 2067 101-150 302 495 548 821 721 1750 1418 1995 2291 51-100 388 632 603 922 935 1810 1699 2547 2697 31-50 600 929 836 1119 1024 1810 2239 3486 3764 16-30 - 1075 1101 1509 1304 1810 2778 3960 4480 <15 - 1345 1345 1610 1786 1810 2905 3960 4480 Minimum OHL capacity based on minimum recommended sheave diameter and unit driven by maximum motor HP. 108 Speed Reducers Concentric SERIES AGMA Application Classifications Application Agitators (Mixers) Pure Liquids Liquids & Solids Liquids - Variable Density Service Factor Application Up to 3 hrs/day Up to 10 hrs/day Over 10 hrs/day — 1.00 1.00 1.00 1.25 1.25 1.25 1.50 1.50 Blowers Centrifugal Lobe Vane 1.00 1.00 — 1.25 1.25 1.00 — 1.50 1.25 Brewing and Distilling Bottling Machinery Brew Kettles, Continuous Duty Cookers - Continuous Duty Mash Tubs - Continuous Duty Scale Hoppers, Frequent Starts — — — — 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.50 — 1.00 1.25 Car Dumpers 1.25 1.50 1.75 Car Pullers 1.00 1.25 1.50 — 1.00 1.25 1.00 1.25 1.50 Can Filling Machines Clarifiers Classifiers Clay Working Industry Brick Press Briquette Machine Pug Mill 1.25 1.25 1.00 1.50 1.50 1.25 1.75 1.75 1.50 Compactors 1.50 1.75 2.00 Compressors Centrifugal Lobe Reciprocating, Multi - Cylinder Reciprocating, Single - Cylinder Conveyors - General Purpose Uniformly Loaded or Fed Not Uniformly Fed Reciprocating or Shaker Cranes Dry Dock Main Hoist Auxiliary Boom Hoist Slewing Drive Traction Drive Container Main Hoist — 1.00 1.00 1.25 1.00 1.25 1.25 1.50 1.25 1.50 1.50 1.75 — 1.00 1.25 1.00 1.25 1.50 1.25 1.50 1.75 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 1.75 1.75 1.75 1.75 1.50 Service Factor Up to 3 hrs/day Cranes (Continued) Boom Hoist Trolley Drive (Gantry Drive) (Traction Drive) Mill Duty Main Auxiliary Bridge & Trolley Travel Industrial Duty Main Auxiliary Bridge & Trolley Travel 7000 Up to 10 hrs/day Over 10 hrs/day Refer to Application Engineering Refer to Application Engineering Refer to Application Engineering Refer to Application Engineering Refer to Application Engineering Refer to Application Engineering 1.25 1.50 1.75 Refer to Application Engineering Refer to Application Engineering Crusher Stone or Ore 1.50 1.75 2.00 Dredges Cable Reels Conveyors Cutter Head Drives Pumps 1.00 Screen Drives Stackers Winches 1.00 1.00 1.25 1.25 1.25 1.00 1.00 1.25 1.25 1.50 1.50 1.50 1.25 1.25 1.50 1.50 1.75 Elevators Bucket Centrifugal Discharge Escalators Freight Gravity Discharge 1.00 1.25 1.50 — 1.00 1.25 Refer to Application Engineering Refer to Application Engineering — 1.00 1.25 Extruders General Plastics (a) Variable Speed Drive (b) Fixed Speed Drive Rubber (a) Continuous Screw Operation (b) Intermittent Screw Operation Fans Centrifugal Cooling Towers Forced Draft Induced Draft Industrial & Mine 1.75 1.50 1.50 1.25 1.25 1.25 1.50 1.75 1.50 1.75 1.50 1.75 1.50 1.75 1.50 1.75 1.50 1.75 — 1.00 1.25 Refer to Application Engineering 1.25 1.25 1.25 1.00 1.25 1.50 1.00 1.25 1.50 Refer to Application Engineering 109 Speed Reducers Concentric SERIES AGMA Application Classifications Application Service Factor Up to 3 hrs/day Up to 10 hrs/day Application Over 10 hrs/day Feeders Apron Belt Disc Reciprocating Screw — 1.00 — 1.25 1.00 1.25 1.25 1.00 1.50 1.25 1.50 1.50 1.25 1.75 1.50 Food Industry Cereal Cooker Dough Mixers Meat Grinders Slicers — 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.50 1.50 1.50 — 1.00 1.25 Hammer Mills 1.50 1.50 1.75 Hoists Heavy Duty Medium Duty Skip Hoist 1.25 1.00 1.00 1.50 1.25 1.25 1.75 1.50 1.50 Laundry Tumblers 1.00 1.25 1.50 Laundry Washers 1.00 1.25 1.50 Generators and Executers Lumber Industry Barkers - Spindle Feed - Main Drive Conveyors - Burner - Main or Heavy Duty - Main Log - Re-Saw, Merry-Go-Round - Slab - Transfer Chains - Floor - Green Cut-Off Saws - Chain - Drag Debarking Drums Feeds - Edger - Gang - Trimmer Log Deck Log Hauls - Incline-Well Type Log Turning Devices Planner Feed Planer Tilting Hoists Rolls - Live-Off Bearing.-Roll Cases Sorting Table Tipple Hoist Transfers - Chain - Causeway Tray Drives Veneer Lathe Drives Refer 110 1.25 1.50 1.25 1.50 1.25 1.50 1.25 1.50 1.50 1.25 1.50 1.25 1.25 1.50 1.50 1.25 1.50 1.25 1.50 1.50 1.50 1.50 1.75 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.75 1.25 1.50 1.25 1.50 1.50 1.50 1.25 1.50 1.50 1.25 1.25 1.25 1.50 1.25 1.50 1.50 1.50 1.25 1.50 1.50 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 1.25 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.25 1.25 1.50 to Application Engineering 7000 Service Factor Up to 3 hrs/day Up to 10 hrs/day Over 10 hrs/day Metal Mills Draw Bench Carriage & Main Drive Runout Table Non-reversing Group Drives Individual Drives Reversing Slab Pushers Shears Wire Drawing Wire Winding Machine 1.00 1.25 1.50 1.00 1.50 1.50 1.25 1.50 1.00 1.00 1.25 1.50 1.50 1.25 1.50 1.25 1.25 1.50 1.75 1.75 1.50 1.75 1.50 1.50 Metal Strip Processing Machinery Bridles Coilers & Uncoilers Edge Trimmers Flatteners Loopers (Accumulators) Pinch Rolls Scrap Choppers Shears Slitters 1.25 1.00 1.00 1.00 1.00 1.00 1.00 1.50 1.00 1.25 1.00 1.25 1.25 1.00 1.25 1.25 1.50 1.25 1.50 1.25 1.50 1.50 1.00 1.50 1.50 1.75 1.50 Mills, Rotary Type Ball & Rod Spur Ring Gear Helical Ring Gear Direct Connected Cement Kilns Dryers & Coolers 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.75 1.50 1.75 1.50 1.50 Mixers, Concrete 1.00 1.25 1.50 1.50 1.25 1.75 1.75 1.50 1.25 1.25 1.75 1.50 1.25 1.50 1.25 1.75 1.75 1.50 1.25 1.25 1.75 1.50 1.25 1.25 1.75 1.25 1.75 1.25 1.25 1.75 1.25 1.75 1.25 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 Paper Mills Agitator (Mixer) 1.50 Agitator for Pure Liquids 1.25 Barkers - Mechanical 1.75 Barking Drums 1.75 Beater 1.50 Breaker Stack 1.25 YCalender 1.25 Chipper 1.75 Chip Feeder 1.50 Coating Rolls 1.25 Conveyors Chip, Bark, Chemical 1.25 Log (Including Slab) 1.75 Couch Rolls 1.25 Cutter 1.75 Cylinder Molds 1.25 YDryers Paper Machine 1.25 Conveyor Type 1.25 Embosser 1.25 Extruder 1.50 Fourdrinier Rolls (Includes Lump Breaker, Dandy Roll, Wire Turning, and Return Rolls) 1.25 Jordan 1.25 Kiln Drive 1.50 Mt. Hope Roll 1.25 Speed Reducers Concentric SERIES AGMA Application Classifications Application Service Factor Up to 3 hrs/day Paper Mills (Continued) Paper Rolls Platter Presses - Felt & Suction Pulper Pumps - Vacuum Reel (Surface Type) Screens Chip Rotary Vibrating Size Press Super Calender (See Note) Thickner (AC Motor) (DC Motor) Washer (AC Motor) (DC Motor) Wind and Unwind Stand Winders (Surface Type) YYankee Dryers Plastics Industry - Primary Processing Intensive Internal Mixers (a) Batch Mixers (b) Continuous Mixers Batch Drop Mill - 2 Smooth Rolls Continuous Feed, Holding & Blend Mill Compounding Mills Calenders Up to 10 hrs/day Application Over 10 hrs/day 1.25 1.50 1.25 1.50 1.50 1.25 1.25 1.50 1.25 1.50 1.50 1.25 1.25 1.50 1.25 1.75 1.50 1.50 1.50 1.50 1.75 1.25 1.25 1.50 1.50 1.75 1.25 1.25 1.50 1.50 1.75 1.25 1.25 1.50 1.25 1.50 1.25 1.50 1.25 1.50 1.25 1.00 1.25 1.25 1.50 1.25 1.00 1.25 1.25 1.50 1.25 1.00 1.25 1.25 1.75 1.50 1.25 1.25 1.25 1.50 1.75 1.50 1.25 1.25 1.25 1.50 1.75 1.50 1.25 1.25 1.25 1.50 Plastics Industry - Secondary Processing Blow Molders Coating Film Pipe Pre-Plasticizers Rods Sheet Tubing 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.25 1.25 1.50 Pullers - Barge Haul 1.00 1.50 1.75 — 1.00 1.00 1.25 1.25 1.50 1.00 1.00 1.25 1.25 1.50 1.50 — — — 1.00 1.00 1.00 1.50 1.25 1.25 Pumps Centrifugal Proportioning Reciprocating Single Acting, 3 or more cylinders Double Acting, 2 or more cylinders Rotary - Gear - Lobe - Vane 7000 Service Factor Up to 3 hrs/day Up to 10 hrs/day Over 10 hrs/day Rubber Industry Intensive Internal Mixers (a) Batch Mixers 1.50 (b) Continuous Mixers 1.25 Mixing Mill - 2 Smooth Rolls - (If corrugated rolls are used, (then use the same service factors that are used for a Cracker-Warmer) 1.50 Batch Drop Mill - 2 Smooth Rolls 1.50 Cracker Warmer - 1 Corrugated Roll 1.75 Cracker - 2 Corrugated Rolls 1.75 Holding, Feed & Blend Mill - 2 Rolls 1.25 Refiner - 2 Rolls 1.50 Calenders 1.50 1.75 1.50 1.75 1.50 1.50 1.50 1.75 1.75 1.25 1.50 1.50 1.50 1.50 1.75 1.75 1.25 1.50 1.50 Sand Miller 1.00 1.25 1.50 Sewage Disposal Bar Screens Chemical Feeders Dewatering Screens Scum Breakers Slow or Rapid Mixers Sludge Collectors Thickeners Vacuum Filters — — 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.00 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.25 1.50 1.50 Screens Air Washing Rotary - Stone or Gravel Traveling Water Intake — 1.00 — 1.00 1.25 1.00 1.25 1.50 1.25 Sugar Industry Beet Slicer Cane Knives Crushers Mills (Low Speed End) 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.75 1.50 1.50 1.50 Textile Industry Batchers Calenders Cards Dry Cans Dryers Dyeing Machinery Looms Mangles Nappers Pads Slashers Soapers Spinners Tenter Frames Washers Winders 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 Y Anti-friction bearings only. NOTE: A service factor of 1.0 may be applied at the base of a super calender, operating over a speed range where part of the range is constant horsepower and part of the range is constant torque, provided that the constant horsepower part is greater than 1.5 to 1. A service factor of 1.25 is applicable to super calenders operating over the entire speed range at contant torque, or where the constant horsepower speed range is less than 1.5 to 1. 111 Speed Reducers Mounting Positions 112 B3 B8 B6 B7 V5 V6 Concentric SERIES 7000 Concentric Speed Reducers SERIES Lubrication 7000 The BC7000 series gearing is shipped with one of the following synthetic lubricants per the table below and fitted with a magnetic drain (except frame 71). Each reducer is filled according to the mounting position specified when ordered. Refer to the unit nameplate and the previous page for a mounting position arrangement for your unit. In the case of synthetic oil, the lubricant does not require changing, but it is recommended that proper oil level be checked periodically. SYNTHETIC No Backstop With Backstop -25° F to 125° F (-30° C to 50° C) Sintogear 125 Mobilgear* SHC 150 Omala* HD 150 Manufacturer Cofran* Mobil* Shell* -25° F to 125° F (-30° C to 50° C) Omala* RL 100 Mobil* SHC 629 Manufacturer Shell* Mobil* • Never mix synthetic oil and mineral oil. • Never use extreme pressure (EP) oil in a reducer with a backstop. ACCEPTABLE MINERAL OIL LUBRICANTS Manufacturer Cofran* Mobil* Shell* -4° F to 14° F (-20° C to 10° C) ISO VG 68 Mecanep 68 GL Mobilgear* 626 Omala* 68 ISO VG 100 Cofraline Equitex 100 Mobilgear* 627 Omala* 100 14° F to 122° F(-10° C to 50° C) NO BACKSTOP ISO VG 150 ISO VG 220 Mecanep 150 Equilux C2000 Super Mobilgear* 629 Mobilgear* 630 Omala* 150 Omala* 220 WITH BACKSTOP ISO VG 150 Cofrapoid 80W 90 DTE* Extra Heavy Morlina* 150 122° F and Above (50° C +) ISO VG 320 Mecanep 320 Mobilgear* 632 Omala* 320 OIL CAPACITIES (U.S. QUARTS) Reduction Stages Two Three Gear Frame 71 72 73 74 75 76 77 78 79 72 73 74 75 76 77 78 79 B3 B6 .68 .68 1.01 1.01 2.31 1.75 3.75 6.18 .68 .68 1.01 1.01 2.31 1.75 3.75 6.18 1.44 1.44 2.29 2.29 5.01 4.17 7.42 15.80 1.14 1.14 1.71 1.71 3.90 3.04 5.84 15.18 Mounting Positions B7 B8 Refer to illustration below .85 1.31 .85 1.31 1.50 2.33 1.50 2.33 3.06 3.71 2.68 3.80 5.09 6.67 10.42 15.37 .85 1.31 .85 1.31 2.33 1.50 1.50 2.33 3.06 3.71 2.68 3.80 5.09 6.67 10.42 15.37 * The terms used in the above tables are the trade names, trademarks, and/or registered trademarks of the respective owners, are used herein for comparison or reference, and are not the property of, controlled by, or affiliated with Emerson Power Transmission Manufacturing, L.P. V5 V6 1.19 1.19 2.58 2.58 4.28 4.11 7.99 17.74 1.19 1.19 2.58 2.58 4.28 4.11 7.99 17.74 1.56 1.56 2.65 2.65 4.66 4.41 7.87 15.58 1.56 1.56 2.65 2.65 4.66 4.41 7.87 15.58 Primary Gear Input Opening Orient the gear head vertically and fill to mid-point of the primary gear. Diagram for size 71 oil level. 113 Concentric Combined Units SERIES Lubrication 7000 PRIMARY SECONDARY Foot Mounted Combined Units (U.S. Quarts) Reduction Gear Composition Stages Frame Prim. Sec. 7404 7402 3012 7504 7502 3012 7604 7602 3012 Four 7704 7702 3012 7804 7802 3132 7904 7902 3132 7405 7403 3012 7505 7503 3012 7605 7603 3012 Five 7705 7703 3012 7805 7803 3132 7905 7903 3132 B3 Prim. Sec. 1.01 * 1.01 * 2.31 * 1.75 * 3.75 .63 6.18 .63 1.01 * 1.01 * 2.31 * 1.75 * 3.75 .63 6.18 .63 B6 Prim. Sec. 2.29 * 2.29 * 5.01 * 4.17 * 7.42 1.00 15.80 1.00 1.71 * 1.71 * 3.90 * 3.04 * 5.84 1.00 15.18 1.00 * See illustration for oil measurement from product installation manual. 114 Mounting Positions B7 B8 Prim. Sec. Prim. Sec. 1.50 * 2.33 * 1.50 * 2.33 * 3.06 * 3.71 * 2.68 * 3.80 * 5.09 .90 6.67 1.16 10.42 .90 15.37 1.16 1.50 * 2.33 * 1.50 * 2.33 * 3.06 * 3.71 * 2.68 * 3.80 * 5.09 .90 6.67 1.16 10.42 .90 15.37 1.16 V5 Prim. Sec. 2.58 * 2.58 * 4.28 * 4.11 * 7.99 1.22 17.74 1.22 2.58 * 2.58 * 4.28 * 4.11 * 7.99 1.22 17.74 1.22 V6 Prim. Sec. 2.65 * 2.65 * 4.66 * 4.41 * 7.87 1.48 15.58 1.48 2.65 * 2.65 * 4.66 * 4.41 * 7.87 1.48 15.58 1.48 ™ Connect at www.emerson-ept.com to receive: • Cost savings through electronic services • Engineering efficiencies via online technical support • Integrated site for integrated solutions across seven major brands Our Web Site Provides a Wide Range of Efficient eBusiness Tools User-friendly site provides comprehensive data on demand. Product information is readily available to all visitors and registrants “24-7.” • • • • Corporate overview All product families and brands Find a distributor Literature request forms EDGE Online provides you with technical information and product selection capabilities Also available around-the-clock, these electronic tools provide for efficient drive design and product selection: • eCatalog — an interactive, robust electronic “database” with over 100,000 part numbers searchable by part number or general description providing features and benefits of each product line • Product Selection — selection tools with extensive engineering efficiency benefits • Smart Interchange — a dynamic tool that provides the user an intelligent interchange for competitive parts • CAD — an online service that allows users to view and upload a 2D or 3D CAD template drawing in a number of customer-compatible formats to be integrated into your drawings ® ® • Media Library — digital (PDF) viewable paper catalogs, documents, and downloadable installation and maintenance instructions • Engineered Solutions — a quick and easy way for engineers to communicate special application information 115 Concentric Speed Reducers SERIES Motor RPM 1750 7000 Exact Ratio RPM, HP and Torque Nom. RPM 438 4 389 4.5 350 5 313 5.6 278 6.3 246 7.1 219 8 194 9 175 10 156 11.2 140 12.5 125 14 109 16 97 18 88 20 78 22.4 70 25 63 28 56 31.5 116 Size of S7000 Reducer Nom. Ratio 71 6.93 3.06 8.16 2.69 8.59 2.56 10.20 2.17 10.92 2.03 12.23 1.82 14.24 1.57 15.35 1.46 18.06 1.25 20.24 1.12 22.76 1.00 25.59 0.89 28.85 0.79 32.48 0.70 72 7102 733 7102 762 7102 763 7102 768 7102 769 7102 772 7102 776 7102 777 7102 781 7102 783 7102 786 7102 787 7102 789 7102 791 3.91 6.29 4.43 5.68 4.99 5.56 5.65 5.38 6.42 5.18 7.34 4.57 8.28 4.37 8.79 4.12 10.43 3.47 11.04 3.28 12.61 2.87 14.08 2.57 15.79 2.29 18.28 1.98 20.07 1.80 21.36 1.96 24.41 1.72 27.25 1.54 30.55 1.37 73 7202 850 7202 870 7202 960 7202 1050 7202 1150 7202 1160 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7212 1450 7212 1450 7212 1450 7212 1450 Exact ratio Gear frame Input H.P. Output torque 3.91 7.04 4.43 6.32 4.99 6.14 5.65 5.90 6.42 5.63 7.34 4.93 7.57 5.18 8.57 4.79 9.67 4.42 10.94 4.07 12.43 3.74 14.20 3.42 16.03 3.15 17.01 2.98 20.20 2.52 21.36 2.39 24.41 2.09 27.25 1.88 30.55 1.68 74 7302 954 7302 969 7302 1061 7302 1155 7302 1251 7302 1251 7312 1359 7312 1421 7312 1480 7312 1542 7312 1609 7312 1681 7312 1750 7312 1753 7312 1762 7312 1765 7312 1771 7312 1776 7312 1780 3.87 10.91 4.57 9.81 4.88 9.78 5.51 9.50 6.10 8.82 6.96 8.10 7.63 8.11 9.02 7.41 9.62 7.34 10.88 7.16 12.04 6.61 13.72 6.01 15.82 5.36 16.90 5.12 19.18 4.51 21.31 4.21 24.20 3.72 26.93 3.34 30.29 2.97 7402 1460 7402 1550 7402 1650 7402 1810 7402 1860 7402 1950 7412 2140 7412 2310 7412 2440 7412 2695 7412 2750 7412 2850 7412 2930 7412 2990 7412 2990 7412 3100 7412 3110 7412 3110 7412 3110 Concentric Speed Reducers SERIES Motor RPM 1750 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 438 4 389 4 .5 350 5 313 5.6 278 6.3 246 7.1 219 8 194 9 175 10 156 11.2 140 12.5 1 25 14 109 16 97 18 88 20 78 22.4 70 25 63 28 56 31.5 75 3.87 16.04 4.57 13.94 4.88 13.07 5.51 11.57 6.10 10.45 6.96 9.17 7.63 10.28 9.02 9.26 9.62 8.84 10.88 8.18 12.04 7.64 13.72 7.02 15.82 6.38 16.90 6.10 19.18 5.60 21.31 5.22 24.20 4.72 26.93 4.25 30.29 3.79 76 7502 2150 7502 2208 7502 2208 7502 2208 7502 2208 7502 2208 7512 2718 7512 2891 7512 2947 7512 3082 7512 3186 7512 3335 7512 3492 7512 3571 7512 3719 7512 3850 7512 3952 7512 3964 7512 3977 3.98 21.44 4.59 18.59 5.06 16.86 5.59 15.26 6.41 13.31 7.09 12.03 7.85 17.61 9.06 15.26 9.98 13.85 11.03 12.59 12.65 11.20 13.98 10.55 16.05 9.59 18.08 8.72 19.64 8.25 21.89 7.40 24.56 6.59 27.80 5.83 30.24 5.36 If shaded, mechanical H.P. may exceed thermal H.P. limit. Refer to page 134. 77 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7612 4780 7612 4780 7612 4780 7612 4800 7612 4900 7612 5100 7612 5320 7612 5450 7612 5600 7612 5600 7612 5600 7612 5600 7612 5600 3.98 26.24 4.59 22.74 5.06 20.64 5.59 18.68 6.41 16.28 7.09 14.73 7.85 21.22 9.06 19.35 9.98 18.13 11.03 16.56 12.65 15.46 13.98 14.12 16.05 12.68 18.08 11.39 19.64 10.49 21.89 9.41 24.56 8.39 27.80 7.41 30.24 6.81 Exact ratio Gear frame Input H.P. Output torque 78 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7712 5767 7712 6069 7712 6266 7712 6330 7712 6774 7712 6839 7712 7052 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 3.91 38.77 4.37 41.60 4.91 42.14 5.48 35.76 6.21 36.63 6.86 34.35 7.69 38.77 8.60 38.41 9.67 35.65 10.78 33.16 12.23 30.33 13.50 28.00 15.77 24.63 17.61 22.21 19.77 19.86 22.37 17.64 25.55 15.52 27.42 14.49 31.90 12.52 79 7802 5249 7802 6299 7802 7168 7802 6786 7802 7883 7802 8160 7812 10329 7812 11446 7812 11933 7812 12381 7812 12844 7812 13089 7812 13452 7812 13540 7812 13601 7812 13663 7812 13727 7812 13760 7812 13826 4.07 66.63 4.66 66.63 5.10 66.63 5.70 57.53 6.38 53.87 7.18 48.81 7.92 66.63 9.07 64.65 9.94 60.86 11.10 56.06 12.43 52.23 13.98 47.77 15.17 45.28 17.24 41.48 19.07 36.51 22.06 33.75 24.08 31.03 27.05 27.74 30.14 25.00 7902 9371 7902 10727 7902 11760 7902 11350 7902 11903 7902 12133 7912 18252 7912 20305 7912 20956 7912 21544 7912 22478 7912 23128 7912 23788 7912 24761 7912 24111 7912 25783 7912 25876 7912 25987 7912 26088 117 Concentric Speed Reducers SERIES Motor RPM 1750 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM 49 35.5 44 40 39 45 35 50 31 56 28 63 25 71 22 80 19 90 18 100 16 112 14 125 12.5 140 10.9 160 9.7 180 8.8 200 118 Size of S7000 Reducer Nom. Ratio 71 35.73 0.64 40.32 0.57 45.36 0.51 72 7102 793 7102 794 7102 796 35.37 1.19 38.84 1.08 44.54 0.94 49.15 0.85 57.83 0.64 65.25 0.59 69.24 0.57 82.23 0.49 86.97 0.48 99.40 0.42 110.94 0.39 124.40 0.34 144.02 0.30 158.13 0.27 181.32 0.24 200.11 0.21 73 7212 1450 7212 1450 7212 1450 7212 1450 7203 1250 7203 1300 7203 1330 7203 1360 7203 1400 7203 1430 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 35.37 1.46 38.84 1.33 44.54 1.00 49.15 1.00 57.83 0.69 65.25 0.63 69.24 0.61 82.23 0.54 86.97 0.52 99.40 0.48 110.94 0.45 124.40 0.41 144.02 0.37 158.13 0.34 181.32 0.29 200.11 0.27 Exact ratio Gear frame Input H.P. Output torque 74 7312 1786 7312 1790 7312 1540 7312 1699 7303 1351 7303 1406 7303 1434 7303 1519 7303 1547 7303 1618 7303 1678 7303 1744 7303 1804 7303 1804 7303 1804 7303 1804 35.51 2.53 39.20 2.29 42.98 2.09 50.19 1.79 55.70 1.65 64.20 1.43 68.61 1.34 77.86 1.18 86.48 1.06 98.24 0.93 109.30 0.84 122.96 0.75 144.13 0.64 159.10 0.58 174.46 0.53 203.72 0.45 7412 3110 7412 3110 7412 3110 7412 3110 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 Concentric Speed Reducers SERIES Motor RPM 1750 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 49 35.5 44 40 39 45 35 50 31 56 28 63 25 71 22 80 19 90 18 100 16 112 14 125 12.5 140 10.9 160 9.7 180 8.8 200 75 35.51 3.25 39.20 2.95 42.98 2.69 50.19 2.32 55.70 2.13 64.20 1.85 68.61 1.73 77.86 1.53 86.48 1.37 98.24 1.21 109.30 1.09 122.96 0.97 144.13 0.82 159.10 0.75 174.46 0.68 203.72 0.58 76 7512 3993 7512 4002 7512 4010 7512 4024 7503 4032 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 34.18 4.74 39.36 4.12 43.98 3.78 48.68 3.40 57.57 2.98 66.10 2.59 74.44 2.30 80.86 2.12 90.12 1.90 101.13 1.71 114.47 1.51 124.53 1.39 140.74 1.23 162.06 1.07 181.09 0.95 200.44 0.86 77 7612 5600 7612 5600 7612 5750 7612 5720 7603 5800 7603 5800 7603 5800 7603 5800 7603 5800 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 34.18 6.03 39.36 5.23 43.98 4.68 48.68 4.23 57.57 3.77 66.10 3.29 74.44 3.01 80.86 2.77 90.12 2.49 101.13 2.21 114.47 1.96 124.53 1.80 140.74 1.59 162.06 1.38 181.09 1.24 200.44 1.12 78 7712 7132 7712 7132 7712 7132 7712 7132 7703 7383 7703 7389 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 Exact ratio Gear frame Input H.P. Output torque 34.62 11.56 38.24 10.50 42.46 9.48 50.34 8.03 54.71 7.55 63.93 6.48 71.36 5.82 80.13 5.20 90.66 4.61 103.54 4.04 111.11 3.77 129.28 3.25 140.31 3.00 154.98 2.72 172.09 2.45 203.99 2.07 79 7812 13861 7812 13901 7812 13941 7812 14004 7803 14033 7803 14084 7803 14118 7803 14152 7803 14187 7803 14222 7803 14240 7803 14277 7803 14295 7803 14317 7803 14339 7803 14373 34.18 22.14 39.23 19.37 42.67 17.85 49.71 15.39 56.63 11.64 61.44 11.13 69.82 10.32 77.24 9.74 89.35 8.63 97.53 8.03 109.55 7.25 122.06 6.52 138.42 5.77 158.87 5.03 172.82 4.63 201.34 3.99 7912 26199 7912 26314 7912 26381 7912 26496 7903 22403 7903 23239 7903 24473 7903 25562 7903 26204 7903 26602 7903 26991 7903 27049 7903 27115 7903 27173 7903 27212 7903 27274 119 Concentric Speed Reducers SERIES Motor RPM 1450 7000 Exact Ratio RPM, HP and Torque Nom. RPM 363 4 322 4.5 290 5 259 5.6 230 6.3 204 7.1 181 8 161 9 145 10 129 11.2 116 12.5 104 14 91 16 81 18 73 20 65 22.4 58 25 52 28 46 31.5 120 Size of S7000 Reducer Nom. Ratio 71 6.93 2.54 8.16 2.23 8.59 2.12 10.20 1.80 10.92 1.68 12.23 1.51 14.24 1.30 15.35 1.21 18.06 1.04 20.24 0.93 22.76 0.83 25.59 0.74 28.85 0.65 32.48 0.58 72 7102 733 7102 762 7102 763 7102 768 7102 769 7102 772 7102 776 7102 777 7102 781 7102 783 7102 786 7102 787 7102 789 7102 791 3.91 5.21 4.43 4.71 4.99 4.61 5.65 4.45 6.42 4.29 7.34 3.79 8.28 3.62 8.79 3.41 10.43 2.88 11.04 2.72 12.61 2.38 14.08 2.13 15.79 1.90 18.28 1.64 20.07 1.49 21.36 1.63 24.41 1.42 27.25 1.28 30.55 1.14 73 7202 850 7202 870 7202 960 7202 1050 7202 1150 7202 1160 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7212 1450 7212 1450 7212 1450 7212 1450 Exact ratio Gear frame Input H.P. Output torque 3.91 5.83 4.43 5.24 4.99 5.09 5.65 4.89 6.42 4.66 7.34 4.08 7.57 4.29 8.57 3.97 9.67 3.66 10.94 3.37 12.43 3.10 14.20 2.83 16.03 2.61 17.01 2.47 20.20 2.09 21.36 1.98 24.41 1.73 27.25 1.56 30.55 1.39 74 7302 954 7302 969 7302 1061 7302 1155 7302 1251 7302 1251 7312 1359 7312 1421 7312 1480 7312 1542 7312 1609 7312 1681 7312 1750 7312 1753 7312 1762 7312 1765 7312 1771 7312 1776 7312 1780 3.87 9.04 4.57 8.13 4.88 8.10 5.51 7.87 6.10 7.31 6.96 6.71 7.63 6.72 9.02 6.14 9.62 6.08 10.88 5.94 12.04 5.47 13.72 4.98 15.82 4.44 16.90 4.24 19.18 3.74 21.31 3.49 24.20 3.08 26.93 2.77 30.29 2.46 7402 1460 7402 1550 7402 1650 7402 1810 7402 1860 7402 1950 7412 2140 7412 2310 7412 2440 7412 2695 7412 2750 7412 2850 7412 2930 7412 2990 7412 2990 7412 3100 7412 3110 7412 3110 7412 3110 Concentric Speed Reducers SERIES Motor RPM 1450 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 363 4 322 4 .5 290 5 259 5.6 230 6.3 204 7.1 181 8 161 9 145 10 129 11.2 116 12.5 104 14 91 16 81 18 73 20 65 22.4 58 25 52 28 46 31.5 75 3.87 13.29 4.57 11.55 4.88 10.83 5.51 9.59 6.10 8.66 6.96 7.60 7.63 8.52 9.02 7.67 9.62 7.32 10.88 6.78 12.04 6.33 13.72 5.82 15.82 5.29 16.90 5.05 19.18 4.64 21.31 4.33 24.20 3.91 26.93 3.52 30.29 3.14 76 7502 2150 7502 2208 7502 2208 7502 2208 7502 2208 7502 2208 7512 2718 7512 2891 7512 2947 7512 3082 7512 3186 7512 3335 7512 3492 7512 3571 7512 3719 7512 3850 7512 3952 7512 3964 7512 3977 3.98 17.76 4.59 15.40 5.06 13.97 5.59 12.65 6.41 11.03 7.09 9.97 7.85 14.59 9.06 12.64 9.98 11.48 11.03 10.43 12.65 9.28 13.98 8.74 16.05 7.94 18.08 7.22 19.64 6.83 21.89 6.13 24.56 5.46 27.80 4.83 30.24 4.44 If shaded, mechanical H.P. may exceed thermal H.P. limit. Refer to page 134. 77 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7612 4780 7612 4780 7612 4780 7612 4800 7612 4900 7612 5100 7612 5320 7612 5450 7612 5600 7612 5600 7612 5600 7612 5600 7612 5600 3.98 21.74 4.59 18.84 5.06 17.10 5.59 15.48 6.41 13.49 7.09 12.20 7.85 17.58 9.06 16.03 9.98 15.02 11.03 13.72 12.65 12.81 13.98 11.70 16.05 10.51 18.08 9.44 19.64 8.69 21.89 7.80 24.56 6.95 27.80 6.14 30.24 5.64 Exact ratio Gear frame Input H.P. Output torque 78 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7712 5767 7712 6069 7712 6266 7712 6330 7712 6774 7712 6839 7712 7052 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 3.91 32.12 4.37 34.47 4.91 34.92 5.48 29.63 6.21 30.35 6.86 28.46 7.69 32.12 8.60 31.83 9.67 29.54 10.78 27.48 12.23 25.13 13.50 23.20 15.77 20.41 17.61 18.40 19.77 16.46 22.37 14.62 25.55 12.86 27.42 12.01 31.90 10.37 79 7802 5249 7802 6299 7802 7168 7802 6786 7802 7883 7802 8160 7812 10329 7812 11446 7812 11933 7812 12381 7812 12844 7812 13089 7812 13452 7812 13540 7812 13601 7812 13663 7812 13727 7812 13760 7812 13826 4.07 55.21 4.66 55.21 5.10 55.21 5.70 47.67 6.38 44.64 7.18 40.44 7.92 55.21 9.07 53.57 9.94 50.43 11.10 46.45 12.43 43.28 13.98 39.58 15.17 37.52 17.24 34.37 19.07 30.25 22.06 27.96 24.08 25.71 27.05 22.98 30.14 20.71 7902 9371 7902 10727 7902 11760 7902 11350 7902 11903 7902 12133 7912 18252 7912 20305 7912 20956 7912 21544 7912 22478 7912 23128 7912 23788 7912 24761 7912 24111 7912 25783 7912 25876 7912 25987 7912 26088 121 Concentric Speed Reducers SERIES Motor RPM 1450 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM 41 35.5 36 40 32 45 29 50 26 56 23 63 20 71 18 80 16 90 15 100 13 112 12 125 10 140 9.1 160 8.1 180 7.3 200 122 Size of S7000 Reducer Nom. Ratio 71 35.73 0.53 40.32 0.47 45.36 0.42 72 7102 793 7102 794 7102 796 35.37 0.98 38.84 0.89 44.54 0.78 49.15 0.71 57.83 0.53 65.25 0.49 69.24 0.47 82.23 0.40 86.97 0.39 99.40 0.35 110.94 0.32 124.40 0.29 144.02 0.25 158.13 0.22 181.32 0.20 200.11 0.18 73 7212 1450 7212 1450 7212 1450 7212 1450 7203 1250 7203 1300 7203 1330 7203 1360 7203 1400 7203 1430 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 35.37 1.21 38.84 1.10 44.54 0.83 49.15 0.83 57.83 0.57 65.25 0.52 69.24 0.51 82.23 0.45 86.97 0.43 99.40 0.40 110.94 0.37 124.40 0.34 144.02 0.31 158.13 0.28 181.32 0.24 200.11 0.22 Exact ratio Gear frame Input H.P. Output torque 74 7312 1786 7312 1790 7312 1540 7312 1699 7303 1351 7303 1406 7303 1434 7303 1519 7303 1547 7303 1618 7303 1678 7303 1744 7303 1804 7303 1804 7303 1804 7303 1804 35.51 2.10 39.20 1.90 42.98 1.73 50.19 1.49 55.70 1.36 64.20 1.18 68.61 1.11 77.86 0.98 86.48 0.88 98.24 0.77 109.30 0.70 122.96 0.62 144.13 0.53 159.10 0.48 174.46 0.44 203.72 0.37 7412 3110 7412 3110 7412 3110 7412 3110 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 Concentric Speed Reducers SERIES Motor RPM 1450 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 41 35.5 36 40 32 45 29 50 26 56 23 63 20 71 18 80 16 90 15 100 13 112 12 125 10 140 9.1 160 8.1 180 7.3 200 75 35.51 2.69 39.20 2.44 42.98 2.23 50.19 1.92 55.70 1.76 64.20 1.53 68.61 1.43 77.86 1.27 86.48 1.14 98.24 1.00 109.30 0.90 122.96 0.80 144.13 0.68 159.10 0.62 174.46 0.56 203.72 0.48 76 7512 3993 7512 4002 7512 4010 7512 4024 7503 4032 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 34.18 3.93 39.36 3.41 43.98 3.13 48.68 2.82 57.57 2.47 66.10 2.15 74.44 1.91 80.86 1.76 90.12 1.58 101.13 1.42 114.47 1.25 124.53 1.15 140.74 1.02 162.06 0.88 181.09 0.79 200.44 0.71 77 7612 5600 7612 5600 7612 5750 7612 5720 7603 5720 7603 5800 7603 5800 7603 5800 7603 5800 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 34.18 5.00 39.36 4.33 43.98 3.88 48.68 3.50 57.57 3.12 66.10 2.73 74.44 2.49 80.86 2.30 90.12 2.06 101.13 1.83 114.47 1.62 124.53 1.49 140.74 1.32 162.06 1.14 181.09 1.03 200.44 0.93 78 7712 7132 7712 7132 7712 7132 7712 7132 7703 7383 7703 7389 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 Exact ratio Gear frame Input H.P. Output torque 34.62 9.58 38.24 8.70 42.46 7.85 50.34 6.65 54.71 6.26 63.93 5.37 71.36 4.82 80.13 4.31 90.66 3.82 103.54 3.35 111.11 3.12 129.28 2.69 140.31 2.49 154.98 2.25 172.09 2.03 203.99 1.72 79 7812 13861 7812 13901 7812 13941 7812 14004 7803 14033 7803 14084 7803 14118 7803 14152 7803 14187 7803 14222 7803 14240 7803 14277 7803 14295 7803 14317 7803 14339 7803 14373 34.18 18.34 39.23 16.05 42.67 14.79 49.71 12.75 56.63 9.64 61.44 9.22 69.82 8.55 77.24 8.07 89.35 7.15 97.53 6.65 109.55 6.01 122.06 5.40 138.42 4.78 158.87 4.17 172.82 3.84 201.34 3.31 7912 26199 7912 26314 7912 26381 7912 26496 7903 22403 7903 23239 7903 24473 7903 25562 7903 26204 7903 26602 7903 26991 7903 27049 7903 27115 7903 27173 7903 27212 7903 27274 123 Concentric Speed Reducers SERIES Motor RPM 1160 7000 Exact Ratio RPM, HP and Torque Nom. RPM 290 4 258 4.5 232 5 207 5.6 184 6.3 163 7.1 145 8 129 9 116 10 104 11.2 93 12.5 83 14 73 16 64 18 58 20 52 22.4 46 25 41 28 37 31.5 124 Size of S7000 Reducer Nom. Ratio 71 6.93 2.03 8.16 1.78 8.59 1.70 10.20 1.44 10.92 1.35 12.23 1.21 14.24 1.04 15.35 0.97 18.06 0.83 20.24 0.74 22.76 0.66 25.59 0.59 28.85 0.52 32.48 0.46 72 7102 733 7102 762 7102 763 7102 768 7102 769 7102 772 7102 776 7102 777 7102 781 7102 783 7102 786 7102 787 7102 789 7102 791 3.91 4.17 4.43 3.77 4.99 3.69 5.65 3.56 6.42 3.43 7.34 3.03 8.28 2.90 8.79 2.73 10.43 2.30 11.04 2.17 12.61 1.90 14.08 1.70 15.79 1.52 18.28 1.31 20.07 1.20 21.36 1.30 24.41 1.14 27.25 1.02 30.55 0.91 73 7202 850 7202 870 7202 960 7202 1050 7202 1150 7202 1160 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7212 1450 7212 1450 7212 1450 7212 1450 Exact ratio Gear frame Input H.P. Output torque 3.91 4.67 4.43 4.19 4.99 4.07 5.65 3.91 6.42 3.73 7.34 3.27 7.57 3.43 8.57 3.18 9.67 2.93 10.94 2.70 12.43 2.48 14.20 2.27 16.03 2.09 17.01 1.98 20.20 1.67 21.36 1.58 24.41 1.39 27.25 1.25 30.55 1.11 74 7302 954 7302 969 7302 1061 7302 1155 7302 1251 7302 1251 7312 1359 7312 1421 7312 1480 7312 1542 7312 1609 7312 1681 7312 1750 7312 1753 7312 1762 7312 1765 7312 1771 7312 1776 7312 1780 3.87 7.23 4.57 6.50 4.88 6.48 5.51 6.30 6.10 5.85 6.96 5.37 7.63 5.38 9.02 4.91 9.62 4.86 10.88 4.75 12.04 4.38 13.72 3.98 15.82 3.55 16.90 3.39 19.18 2.99 21.31 2.79 24.20 2.46 26.93 2.21 30.29 1.97 7402 1460 7402 1550 7402 1650 7402 1810 7402 1860 7402 1950 7412 2140 7412 2310 7412 2440 7412 2695 7412 2750 7412 2850 7412 2930 7412 2990 7412 2990 7412 3100 7412 3110 7412 3110 7412 3110 Concentric Speed Reducers SERIES Motor RPM 1160 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 290 4 258 4.5 232 5 207 5.6 184 6.3 163 7.1 145 8 129 9 116 10 104 11.2 93 12.5 83 14 73 16 64 18 58 20 52 22.4 46 25 41 28 37 31.5 75 3.87 10.63 4.57 9.24 4.88 8.66 5.51 7.67 6.10 6.93 6.96 6.08 7.63 6.81 9.02 6.14 9.62 5.86 10.88 5.42 12.04 5.06 13.72 4.65 15.82 4.23 16.90 4.04 19.18 3.71 21.31 3.46 24.20 3.13 26.93 2.82 30.29 2.51 76 7502 2150 7502 2208 7502 2208 7502 2208 7502 2208 7502 2208 7512 2718 7512 2891 7512 2947 7512 3082 7512 3186 7512 3335 7512 3492 7512 3571 7512 3719 7512 3850 7512 3952 7512 3964 7512 3977 3.98 14.21 4.59 12.32 5.06 11.18 5.59 10.12 6.41 8.82 7.09 7.98 7.85 11.67 9.06 10.12 9.98 9.18 11.03 8.34 12.65 7.43 13.98 6.99 16.05 6.35 18.08 5.78 19.64 5.47 21.89 4.90 24.56 4.37 27.80 3.86 30.24 3.55 77 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7612 4780 7612 4780 7612 4780 7612 4800 7612 4900 7612 5100 7612 5320 7612 5450 7612 5600 7612 5600 7612 5600 7612 5600 7612 5600 3.98 17.39 4.59 15.07 5.06 13.68 5.59 12.38 6.41 10.79 7.09 9.76 7.85 14.07 9.06 12.83 9.98 12.02 11.03 10.98 12.65 10.25 13.98 9.36 16.05 8.41 18.08 7.55 19.64 6.95 21.89 6.24 24.56 5.56 27.80 4.91 30.24 4.51 Exact ratio Gear frame Input H.P. Output torque 78 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7712 5767 7712 6069 7712 6266 7712 6330 7712 6774 7712 6839 7712 7052 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 3.91 25.70 4.37 27.57 4.91 27.93 5.48 23.70 6.21 24.28 6.86 22.77 7.69 25.70 8.60 25.46 9.67 23.63 10.78 21.98 12.23 20.10 13.50 18.56 15.77 16.33 17.61 14.72 19.77 13.16 22.37 11.69 25.55 10.29 27.42 9.60 31.90 8.30 79 7802 5249 7802 6299 7802 7168 7802 6786 7802 7883 7802 8160 7812 10329 7812 11446 7812 11933 7812 12381 7812 12844 7812 13089 7812 13452 7812 13540 7812 13601 7812 13663 7812 13727 7812 13760 7812 13826 4.07 44.17 4.66 44.17 5.10 44.17 5.70 38.13 6.38 35.71 7.18 32.35 7.92 44.17 9.07 42.85 9.94 40.34 11.10 37.16 12.43 34.62 13.98 31.66 15.17 30.01 17.24 27.50 19.07 24.20 22.06 22.37 24.08 20.57 27.05 18.39 30.14 16.57 7902 9371 7902 10727 7902 11760 7902 11350 7902 11903 7902 12133 7912 18252 7912 20305 7912 20956 7912 21544 7912 22478 7912 23128 7912 23788 7912 24761 7912 24111 7912 25783 7912 25876 7912 25987 7912 26088 125 Concentric Speed Reducers SERIES Motor RPM 1160 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM 33 35.5 29 40 26 45 23 50 21 56 18 63 16 71 15 80 13 90 12 100 10 112 9.3 125 8.3 140 7.3 160 6.4 180 5.8 200 126 Size of S7000 Reducer Nom. Ratio 71 35.73 0.42 40.32 0.38 45.36 0.34 72 7102 793 7102 794 7102 796 35.37 0.79 38.84 0.72 44.54 0.62 49.15 0.57 57.83 0.42 65.25 0.39 69.24 0.38 82.23 0.32 86.97 0.32 99.40 0.28 110.94 0.26 124.40 0.23 144.02 0.20 158.13 0.18 181.32 0.16 200.11 0.14 73 7212 1450 7212 1450 7212 1450 7212 1450 7203 1250 7203 1300 7203 1330 7203 1360 7203 1400 7203 1430 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 Exact ratio Gear frame Input H.P. Output torque 35.37 0.97 38.84 0.88 44.54 0.66 49.15 0.66 57.83 0.46 65.25 0.42 69.24 0.40 82.23 0.36 86.97 0.34 99.40 0.32 110.94 0.30 124.40 0.27 144.02 0.25 158.13 0.23 181.32 0.19 200.11 0.18 74 7312 1786 7312 1790 7312 1540 7312 1699 7303 1351 7303 1406 7303 1434 7303 1519 7303 1547 7303 1618 7303 1678 7303 1744 7303 1804 7303 1804 7303 1804 7303 1804 35.51 1.68 39.20 1.52 42.98 1.39 50.19 1.19 55.70 1.09 64.20 0.95 68.61 0.89 77.86 0.78 86.48 0.70 98.24 0.62 109.30 0.56 122.96 0.49 144.13 0.42 159.10 0.38 174.46 0.35 203.72 0.30 7412 3110 7412 3110 7412 3110 7412 3110 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 Concentric Speed Reducers SERIES Motor RPM 1160 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 33 35.5 29 40 26 45 23 50 21 56 18 63 16 71 15 80 13 90 12 100 10 112 9.3 125 8.3 140 7.3 160 6.4 180 5.8 200 75 35.51 2.15 39.20 1.96 42.98 1.78 50.19 1.54 55.70 1.41 64.20 1.23 68.61 1.15 77.86 1.01 86.48 0.91 98.24 0.80 109.30 0.72 122.96 0.64 144.13 0.54 159.10 0.50 174.46 0.45 203.72 0.38 76 7512 3993 7512 4002 7512 4010 7512 4024 7503 4032 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 34.18 3.14 39.36 2.73 43.98 2.51 48.68 2.25 57.57 1.97 66.10 1.72 74.44 1.53 80.86 1.40 90.12 1.26 101.13 1.13 114.47 1.00 124.53 0.92 140.74 0.81 162.06 0.71 181.09 0.63 200.44 0.57 77 7612 5600 7612 5600 7612 5750 7612 5720 7603 5720 7603 5800 7603 5800 7603 5800 7603 5800 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 34.18 4.00 39.36 3.47 43.98 3.10 48.68 2.80 57.57 2.50 66.10 2.18 74.44 2.00 80.86 1.84 90.12 1.65 101.13 1.46 114.47 1.30 124.53 1.19 140.74 1.05 162.06 0.91 181.09 0.82 200.44 0.74 Exact ratio Gear frame Input H.P. Output torque 78 7712 7132 7712 7132 7712 7132 7712 7132 7703 7383 7703 7389 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 34.62 7.66 38.24 6.96 42.46 6.28 50.34 5.32 54.71 5.00 63.93 4.30 71.36 3.86 80.13 3.45 90.66 3.06 103.54 2.68 111.11 2.50 129.28 2.15 140.31 1.99 154.98 1.80 172.09 1.62 203.99 1.37 79 7812 13861 7812 13901 7812 13941 7812 14004 7803 14033 7803 14084 7803 14118 7803 14152 7803 14187 7803 14222 7803 14240 7803 14277 7803 14295 7803 14317 7803 14339 7803 14373 34.18 14.68 39.23 12.84 42.67 11.83 49.71 10.20 56.63 7.72 61.44 7.38 69.82 6.84 77.24 6.46 89.35 5.72 97.53 5.32 109.55 4.81 122.06 4.32 138.42 3.82 158.87 3.33 172.82 3.07 201.34 2.64 7912 26199 7912 26314 7912 26381 7912 26496 7903 22403 7903 23239 7903 24473 7903 25562 7903 26204 7903 26602 7903 26991 7903 27049 7903 27115 7903 27173 7903 27212 7903 27274 127 Concentric Speed Reducers SERIES Motor RPM 870 7000 Exact Ratio RPM, HP and Torque Nom. RPM 218 4 193 4.5 174 5 155 5.6 138 6.3 123 7.1 109 8 97 9 87 10 78 11.2 70 12.5 62 14 54 16 48 18 44 20 39 22.4 35 25 31 28 28 31.5 128 Size of S7000 Reducer Nom. Ratio 71 6.93 1.52 8.16 1.34 8.59 1.27 10.20 1.08 10.92 1.01 12.23 0.90 14.24 0.78 15.35 0.73 18.06 0.62 20.24 0.56 22.76 0.50 25.59 0.44 28.85 0.39 32.48 0.35 72 7102 733 7102 762 7102 763 7102 768 7102 769 7102 772 7102 776 7102 777 7102 781 7102 783 7102 786 7102 787 7102 789 7102 791 3.91 3.13 4.43 2.82 4.99 2.77 5.65 2.67 6.42 2.58 7.34 2.27 8.28 2.17 8.79 2.05 10.43 1.73 11.04 1.63 12.61 1.43 14.08 1.28 15.79 1.14 18.28 0.98 20.07 0.90 21.36 0.98 24.41 0.85 27.25 0.77 30.55 0.68 73 7202 850 7202 870 7202 960 7202 1050 7202 1150 7202 1160 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7202 1252 7212 1450 7212 1450 7212 1450 7212 1450 Exact ratio Gear frame Input H.P. Output torque 3.91 3.50 4.43 3.14 4.99 3.05 5.65 2.93 6.42 2.80 7.34 2.45 7.57 2.58 8.57 2.38 9.67 2.20 10.94 2.02 12.43 1.86 14.20 1.70 16.03 1.57 17.01 1.48 20.20 1.25 21.36 1.19 24.41 1.04 27.25 0.93 30.55 0.84 74 7302 954 7302 969 7302 1061 7302 1155 7302 1251 7302 1251 7312 1359 7312 1421 7312 1480 7312 1542 7312 1609 7312 1681 7312 1750 7312 1753 7312 1762 7312 1765 7312 1771 7312 1776 7312 1780 3.87 5.42 4.57 4.88 4.88 4.86 5.51 4.72 6.10 4.38 6.96 4.03 7.63 4.03 9.02 3.68 9.62 3.65 10.88 3.56 12.04 3.28 13.72 2.99 15.82 2.66 16.90 2.54 19.18 2.24 21.31 2.09 24.20 1.85 26.93 1.66 30.29 1.48 7402 1460 7402 1550 7402 1650 7402 1810 7402 1860 7402 1950 7412 2140 7412 2310 7412 2440 7412 2695 7412 2750 7412 2850 7412 2930 7412 2990 7412 2990 7412 3100 7412 3110 7412 3110 7412 3110 Concentric Speed Reducers SERIES Motor RPM 870 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 218 4 193 4.5 174 5 155 5.6 138 6.3 123 7.1 109 8 97 9 87 10 78 11.2 70 12.5 62 14 54 16 48 18 44 20 39 22.4 35 25 31 28 28 31.5 75 3.87 7.97 4.57 6.93 4.88 6.50 5.51 5.75 6.10 5.20 6.96 4.56 7.63 5.11 9.02 4.60 9.62 4.39 10.88 4.07 12.04 3.80 13.72 3.49 15.82 3.17 16.90 3.03 19.18 2.78 21.31 2.60 24.20 2.35 26.93 2.11 30.29 1.88 76 7502 2150 7502 2208 7502 2208 7502 2208 7502 2208 7502 2208 7512 2718 7512 2891 7512 2947 7512 3082 7512 3186 7512 3335 7512 3492 7512 3571 7512 3719 7512 3850 7512 3952 7512 3964 7512 3977 3.98 10.66 4.59 9.24 5.06 8.38 5.59 7.59 6.41 6.62 7.09 5.98 7.85 8.76 9.06 7.59 9.98 6.89 11.03 6.26 12.65 5.57 13.98 5.25 16.05 4.77 18.08 4.33 19.64 4.10 21.89 3.68 24.56 3.28 27.80 2.90 30.24 2.66 77 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7602 2950 7612 4780 7612 4780 7612 4780 7612 4800 7612 4900 7612 5100 7612 5320 7612 5450 7612 5600 7612 5600 7612 5600 7612 5600 7612 5600 3.98 13.05 4.59 11.31 5.06 10.26 5.59 9.29 6.41 8.09 7.09 7.32 7.85 10.55 9.06 9.62 9.98 9.01 11.03 8.23 12.65 7.69 13.98 7.02 16.05 6.30 18.08 5.66 19.64 5.22 21.89 4.68 24.56 4.17 27.80 3.68 30.24 3.39 Exact ratio Gear frame Input H.P. Output torque 78 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7702 3615 7712 5767 7712 6069 7712 6266 7712 6330 7712 6774 7712 6839 7712 7052 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 7712 7132 3.91 19.27 4.37 20.68 4.91 20.95 5.48 17.78 6.21 18.21 6.86 17.08 7.69 19.27 8.60 19.10 9.67 17.72 10.78 16.49 12.23 15.08 13.50 13.92 15.77 12.24 17.61 11.04 19.77 9.87 22.37 8.77 25.55 7.72 27.42 7.20 31.90 6.22 79 7802 5249 7802 6299 7802 7168 7802 6786 7802 7883 7802 8160 7812 10329 7812 11446 7812 11933 7812 12381 7812 12844 7812 13089 7812 13452 7812 13540 7812 13601 7812 13663 7812 13727 7812 13760 7812 13826 4.07 33.12 4.66 33.12 5.10 33.12 5.70 28.60 6.38 26.78 7.18 24.27 7.92 33.12 9.07 32.14 9.94 30.26 11.10 27.87 12.43 25.97 13.98 23.75 15.17 22.51 17.24 20.62 19.07 18.15 22.06 16.78 24.08 15.43 27.05 13.79 30.14 12.43 7902 9371 7902 10727 7902 11760 7902 11350 7902 11903 7902 12133 7912 18252 7912 20305 7912 20956 7912 21544 7912 22478 7912 23128 7912 23788 7912 24761 7912 24111 7912 25783 7912 25876 7912 25987 7912 26088 129 Concentric Speed Reducers SERIES Motor RPM 870 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM 25 35.5 22 40 19 45 17 50 16 56 14 63 12 71 11 80 10 90 8.7 100 7.8 112 7.0 125 6.2 140 5.4 160 4.8 180 4.4 200 130 Size of S7000 Reducer Nom. Ratio 71 35.73 0.32 40.32 0.28 45.36 0.25 72 7102 793 7102 794 7102 796 35.37 0.59 38.84 0.54 44.54 0.47 49.15 0.42 57.83 0.32 65.25 0.29 69.24 0.28 82.23 0.24 86.97 0.24 99.40 0.21 110.94 0.19 124.40 0.17 144.02 0.15 158.13 0.13 181.32 0.12 200.11 0.11 73 7212 1450 7212 1450 7212 1450 7212 1450 7203 1250 7203 1300 7203 1330 7203 1360 7203 1400 7203 1430 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 7203 1450 Exact ratio Gear frame Input H.P. Output torque 35.37 0.73 38.84 0.66 44.54 0.50 49.15 0.50 57.83 0.34 65.25 0.31 69.24 0.30 82.23 0.27 86.97 0.26 99.40 0.24 110.94 0.22 124.40 0.20 144.02 0.18 158.13 0.17 181.32 0.14 200.11 0.13 74 7312 1786 7312 1790 7312 1540 7312 1699 7303 1351 7303 1406 7303 1434 7303 1519 7303 1547 7303 1618 7303 1678 7303 1744 7303 1804 7303 1804 7303 1804 7303 1804 35.51 1.26 39.20 1.14 42.98 1.04 50.19 0.89 55.70 0.82 64.20 0.71 68.61 0.66 77.86 0.59 86.48 0.53 98.24 0.46 109.30 0.42 122.96 0.37 144.13 0.32 159.10 0.29 174.46 0.26 203.72 0.22 7412 3110 7412 3110 7412 3110 7412 3110 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 7403 3105 Concentric Speed Reducers SERIES Motor RPM 870 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 25 35.5 22 40 19 45 17 50 16 56 14 63 12 71 11 80 10 90 8.7 100 7.8 112 7.0 125 6.2 140 5.4 160 4.8 1 80 4.4 200 75 35.51 1.62 39.20 1.47 42.98 1.34 50.19 1.15 55.70 1.06 64.20 0.92 68.61 0.86 77.86 0.76 86.48 0.68 98.24 0.60 109.30 0.54 122.96 0.48 144.13 0.41 159.10 0.37 174.46 0.34 203.72 0.29 76 7512 3993 7512 4002 7512 4010 7512 4024 7503 4032 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 7503 4038 34.18 2.36 39.36 2.05 43.98 1.88 48.68 1.69 57.57 1.48 66.10 1.29 74.44 1.14 80.86 1.05 90.12 0.95 101.13 0.85 114.47 0.75 124.53 0.69 140.74 0.61 162.06 0.53 181.09 0.47 200.44 0.43 77 7612 5600 7612 5600 7612 5750 7612 5720 7603 5720 7603 5800 7603 5800 7603 5800 7603 5800 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 7603 5850 34.18 3.00 39.36 2.60 43.98 2.33 48.68 2.10 57.57 1.87 66.10 1.64 74.44 1.50 80.86 1.38 90.12 1.24 101.13 1.10 114.47 0.97 124.53 0.89 140.74 0.79 162.06 0.69 181.09 0.62 200.44 0.56 Exact ratio Gear frame Input H.P. Output torque 78 7712 7132 7712 7132 7712 7132 7712 7132 7703 7383 7703 7389 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 7703 7611 34.62 5.75 38.24 5.22 42.46 4.71 50.34 3.99 54.71 3.75 63.93 3.22 71.36 2.89 80.13 2.59 90.66 2.29 103.54 2.01 111.11 1.87 129.28 1.62 140.31 1.49 154.98 1.35 172.09 1.22 203.99 1.03 79 7812 13861 7812 13901 7812 13941 7812 14004 7803 14033 7803 14084 7803 14118 7803 14152 7803 14187 7803 14222 7803 14240 7803 14277 7803 14295 7803 14317 7803 14339 7803 14373 34.18 11.01 39.23 9.63 42.67 8.87 49.71 7.65 56.63 5.79 61.44 5.53 69.82 5.13 77.24 4.84 89.35 4.29 97.53 3.99 109.55 3.60 122.06 3.24 138.42 2.87 158.87 2.50 172.82 2.30 201.34 1.98 7912 26199 7912 26314 7912 26381 7912 26496 7903 22403 7903 23239 7903 24473 7903 25562 7903 26204 7903 26602 7903 26991 7903 27049 7903 27115 7903 27173 7903 27212 7903 27274 131 Concentric Speed Reducers SERIES Combined - Motor RPM 1750 7000 Exact Ratio RPM, HP and Torque Nom. RPM 7.8 224 7.0 250 6.3 280 5.6 315 4.9 355 4.4 400 3.9 450 3.5 500 3.1 560 2.8 630 2.5 710 2.2 800 1.9 900 1.8 1000 1.6 1120 1.4 1250 1.3 1400 132 Size of S7000 Reducer Nom. Ratio 74 223.5 0.419 247.2 0.379 260.2 0.360 308.9 0.303 330.8 0.283 370.4 0.253 431.3 0.217 465.0 0.202 547.0 0.171 613.1 0.153 689.4 0.136 775.1 0.121 873.9 0.107 983.8 0.095 1082.3 0.087 1221.3 0.077 1374.0 0.070 75 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7404 3105 7405 3105 223.5 0.545 247.2 0.493 260.2 0.468 308.9 0.395 330.8 0.368 370.4 0.329 431.3 0.283 465.0 0.262 547.0 0.223 613.1 0.199 689.4 0.177 775.1 0.157 873.9 0.139 983.8 0.124 1082.3 0.113 1221.3 0.100 1374.0 0.091 76 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7504 4038 7505 4038 223.2 0.791 246.8 0.715 259.8 0.680 308.4 0.573 330.2 0.535 369.8 0.477 430.6 0.410 464.2 0.380 546.1 0.323 612.1 0.288 688.3 0.257 773.8 0.228 872.4 0.202 982.2 0.180 1080.5 0.163 1219.3 0.145 1371.7 0.132 77 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7604 5850 7605 5850 223.2 0.964 246.8 0.872 259.8 0.829 308.4 0.698 330.2 0.652 369.8 0.582 430.6 0.500 464.2 0.464 546.1 0.394 612.1 0.352 688.3 0.313 773.8 0.278 872.4 0.247 982.2 0.219 1080.5 0.199 1219.3 0.177 1371.7 0.171 Exact ratio Gear frame Input H.P. Output torque 78 7704 229.4 7132 1.869 7704 241.5 7132 1.775 7704 273.4 7132 1.568 7704 308.5 7132 1.390 7704 349.0 7132 1.229 7704 396.5 7132 1.081 7704 453.0 7132 0.946 7704 511.4 7132 0.838 7704 542.6 7132 0.790 7704 644.4 7132 0.665 7704 681.4 7132 0.629 7704 778.7 7132 0.551 7704 869.3 7132 0.493 7704 974.5 7132 0.440 7704 1128.3 7132 0.380 7704 1239.0 7132 0.346 7705 1420.8 7611 0.302 79 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 7804 14206 228.2 3.556 258.3 3.142 291.5 2.784 329.7 2.462 374.5 2.167 428.0 1.896 483.1 1.680 512.7 1.583 608.8 1.333 643.8 1.261 735.7 1.103 821.3 0.988 920.8 0.881 1066.1 0.761 1170.6 0.693 1342.4 0.605 1481.4 0.548 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 7904 26890 Concentric Speed Reducers SERIES Combined - Motor RPM 1750 (Continued) 7000 Exact Ratio RPM, HP and Torque Nom. RPM Size of S7000 Reducer Nom. Ratio 1.1 1600 0.97 1800 0.88 2000 0.78 2240 0.70 2500 0.63 2800 0.56 3150 0.49 3550 0.44 4000 0.39 4500 0.35 5000 0.31 5600 0.28 6300 74 1498.6 0.064 1779.5 0.054 1905.1 0.050 2133.6 0.045 2484.3 0.039 2678.0 0.036 3150.7 0.030 3531.1 0.027 3970.7 0.024 4464.4 0.021 5033.2 0.019 5666.5 0.017 6233.5 0.015 75 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 7405 3105 1498.6 0.083 1779.5 0.070 1905.1 0.065 2133.6 0.058 2484.3 0.050 2678.0 0.047 3150.7 0.040 3531.1 0.035 3970.7 0.031 4464.4 0.028 5033.2 0.025 5666.5 0.022 6233.5 0.020 76 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 7505 4038 1555.6 0.116 1847.1 0.098 1977.5 0.091 2214.7 0.081 2578.7 0.070 2779.7 0.065 3270.5 0.055 3665.3 0.049 4121.6 0.044 4634.1 0.039 5224.4 0.035 5881.8 0.031 6470.3 0.028 77 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 7605 5850 1555.6 0.151 1847.1 0.127 1977.5 0.119 2214.7 0.106 2578.7 0.091 2779.7 0.084 3270.5 0.072 3665.3 0.064 4121.6 0.057 4634.1 0.051 5224.4 0.045 5881.8 0.040 6470.3 0.036 Exact ratio Gear frame Input H.P. Output torque 78 7705 1567.9 7611 0.273 7705 1695.5 7611 0.264 7705 1926.4 7611 0.232 7705 2200.7 7611 0.203 7705 2484.3 7611 0.180 7705 2636.2 7611 0.170 7705 3130.6 7611 0.143 7705 3310.4 7611 0.135 7705 3783.1 7611 0.118 7705 4223.2 7611 0.106 7705 4734.6 7611 0.095 7705 5481.6 7611 0.082 7705 6019.4 7611 0.074 79 7804 14206 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 7805 14507 1536.3 0.554 1738.0 0.489 1974.8 0.431 2256.0 0.377 2546.7 0.334 2702.4 0.315 3209.2 0.265 3393.5 0.251 3878.0 0.219 4329.2 0.196 4853.5 0.175 5619.2 0.151 6170.5 0.138 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 7905 27563 133 Speed Reducers Thermal Power Rating (Pt) Gear Frame Nominal Ratio 79 Pt (hp) 134 3.15 - 3.55 - 4 46 4.5 46 5 46 5.6 46 6.3 46 7.1 45 8 45 9 44 10 43 11.2 43 12.5 43 14 43 16 43 18 - 20 - 22.4 - 25 - 28 - 31.5 - 35.5 - 40 - Concentric SERIES 7000 Concentric Speed Reducers SERIES Modifications Gear Modifications 7000 Modifications M11 Corro-Duty M15 Export Boxing Corro-Duty gear reducers are designed for applications in food processing, chemical, poultry and any other industries that will be subjected to extreme humidity, washdown, steam, detergents and mild acids. Construction of the Corro-Duty reducer includes the normally closed breather in the gear case. The exterior of the entire unit is then painted in one of the two options chosen at order entry: Export boxing can be provided for "underdeck" transport. When the quantity of BC7000 gear reducers exceeds five(s) units, refer to the Sales Department for the most economical accommodations. Option #1 - Corro-Duty grey • 3 step paint system using 316 stainless steel paint • Light grey semigloss finish • USDA and FDA approved M16 Special Nameplate Units can be provided with limited, additional special information on the standard product nameplate. When requested, a special nameplate may be provided, stamped with custom markings. M17 Coupling Guards For scoop series, kit includes cover, base and hardware. Option #2 - Corro-Duty white • 2 step paint system using epoxy paint • White gloss finish • USDA and FDA approved M13 NPT Adapter These adapters convert metric threads of breather, drain and/ or oil level holes in the reducer to standard NPT threads. They are required for customer additions of site glasses, sight tubes, special breathers and other plumbing accessories. The adapter(s) is supplied loose for mounting by others. Frame 71 72 - 79 Size N/A 1/4" NPFT Part Number N/A 0436216 Face and Flanged Output Footed flanged version available in size 71. For other sizes refer to USGM CbN Series 2000/3000 in catalog CbN-04. Synthetic Oil BC7000 gear reducers are supplied factory-filled with a premium synthetic oil. Refer to page 113 for complete details of lubricants. Normally Closed Breather A normally closed breather is standard on frames 72 through 79. This breather protects against lubricant contamination in applications with flying dust, lint or washdown. 135 Concentric C-Face Reducer SERIES Gear Frame 71 - Double Reduction RU M 7000 N (4) M6-1 X .44 DP. .39 V ES Key Key1 Ø2.363 Ø3.937 ØBD ØAJ XN O ØAK ØU1 ØU (4) ØBF F D G BA B 2 E A Gear Frame A B D1 E F G H M N O U3 V BA ES XN KEY 71 5.62 5.16 2.95 2.165 4.33 .47 .35 4.13 1.72 6.01 .750 1.57 .72 1.25 .276 3/16 Sq. Motor Frame AJ AK BD BF RU U1 KEY1 56C 5.875 4.50 6.50 .44 3.33 .625 3/16 Sq. 5.875 4.50 6.50 .44 3.33 .875 3/16 Sq. 140TC 1 E (4) ØH 4 Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. All rough casting dimensions may vary by .25" due to casting variations. 136 3 4 Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". Not available for ratios 31.5 to 45:1. Concentric C-Face Reducer SERIES Gear Frames 72 - 79 - Double/Triple Reduction RU M 7000 N V ES Key1 Key XN ØBD ØAK ØAJ U O D ØU1 (4) ØBF G F BA E (4) ØH B E A INPUT CENTERLINE S R .657 Size 76 only Gear Frame 1 2 3 D1 E F M .63 .35 5.39 2.11 6.71 3.35 3.47 1.000 1.97 .98 .77 .53 6.61 2.54 8.32 4.49 4.02 1.250 2.36 1.18 .77 .53 6.61 2.94 8.32 4.49 4.02 1.375 2.76 1.18 5.12 2.955 7.68 .79 .55 7.64 2.84 10.13 5.95 4.84 1.375 2.76 5.51 3.345 8.07 1.04 .69 7.86 3.36 4.81 4.23 10.24 1.29 .69 10.18 4.12 11.81 5.87 .87 12.39 5.03 14.96 7.03 B 72, 73 6.50 6.33 3.54 2.165 5.12 74 7.63 7.68 4.53 2.655 6.50 75 7.63 7.68 4.53 2.655 6.50 76 9.26 9.05 77 9.26 9.65 78 11.42 11.68 7.09 79 13.75 14.37 8.86 4.92 12.20 G 1.81 N O 9.74 R S U 3 H A V BA ES XN KEY 1.50 .335 1/4 Sq. 2.00 .394 1/4 Sq. 2.38 .394 5/16 Sq. 1.18 2.41 N/A 5/16 Sq. 4.81 1.625 3.15 1.38 2.80 .768 3/8 Sq. 5.91 2.125 3.94 1.57 3.31 1.02 1/2 Sq. 7.05 2.375 4.72 1.58 4.06 1.14 5/8 Sq. RU Motor Frame AJ 56C 140TC 180TC 4 5 210TC 4 5 250TC 4 5 280TC 4 5 320TC 4 5 5.875 5.875 7.25 7.25 7.25 9.00 11.00 AK 4.50 4.50 8.50 8.50 8.50 10.50 12.50 BD 6.50 6.50 9.00 9.00 9.00 11.25 13.38 BF .44 .44 .57 .57 .57 .57 .69 72, 73 74 75 76 77 78 79 4.48 4.48 6.20 - 4.48 4.48 6.20 6.20 - 4.48 4.48 6.20 6.20 - 4.32 4.32 6.04 6.04 6.67 - 4.32 4.32 6.04 6.04 6.67 - 4.50 4.50 6.22 6.22 7.43 8.40 - 4.14 4.14 5.87 5.87 7.09 8.06 8.79 Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". 4 5 U1 Key1 .625 .875 1.125 1.375 1.625 1.875 2.125 3/16 Sq. 3/16 Sq. 1/4 Sq. 5/16 Sq. 3/8 Sq. 1/2 Sq. 1/2 Sq. Use foot mounted motor, utilizing separate support of motor feet for these gear and motor frames: 72 - 73 180TC, 74 - 75 210TC, 76 - 77 250TC, 78 280TC and 79 320TC. Not available in all ratios for all gear frames and motor frames. 137 Concentric C-Face Reducer SERIES Gear Frames 74 - 79 - Combined Reduction RU M 7000 N V ES Key Key1 XN U ØAJ ØBD ØAK O ØU1 D (4) ØBF G F BA E (4) ØH B E A INPUT CENTERLINE S R .657 Size 76 only Gear Frame 1 2 3 A B D1 E F G H M N O R S U 3 V BA ES XN KEY 74 7.63 7.68 4.53 2.655 6.50 .77 .53 6.61 2.54 8.32 4.49 4.02 1.250 2.36 1.18 2.00 .118 1/4 Sq. 75 7.63 7.68 4.53 2.655 6.50 .77 .53 6.61 2.94 8.32 4.49 4.02 1.375 2.76 1.18 2.38 .118 5/16 Sq. 76 9.26 9.05 5.12 2.955 7.68 .79 .55 7.64 2.84 10.13 5.95 4.84 1.375 2.76 1.18 2.41 .276 5/16 Sq. 77 9.26 9.65 5.51 3.345 8.07 1.04 .69 7.86 3.36 4.81 1.625 3.15 1.38 2.80 .492 3/8 Sq. 1/2 Sq. 9.74 4.81 78 11.42 11.68 7.09 4.23 10.24 1.29 .69 10.18 4.12 11.81 5.87 5.91 2.125 3.94 1.57 3.31 1.355 79 13.75 14.37 8.86 4.92 12.20 .87 12.39 5.03 14.96 7.03 7.05 2.375 4.72 1.58 4.06 1.475 5/8 Sq. 1.81 RU Motor Frame AJ 56C 140TC 180TC 4 5 5.875 5.875 7.25 AK 4.50 4.50 8.50 BD 6.50 6.50 9.00 BF .44 .44 .57 74 75 76 77 78 79 7.79 7.79 - 7.79 7.79 - 7.62 7.62 - 7.62 7.62 - 11.47 11.47 - 11.11 11.11 12.83 Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". 138 4 5 U1 Key1 .625 .875 1.125 3/16 Sq. 3/16 Sq. 1/4 Sq. Gear frame 79 with 180TC input is not available for 1000:1 to 1400:1 or 5600:1 to 6300:1. Use foot mounted motor, utilizing separate support of motor feet for this motor frame. Concentric Scoop Mount Reducer 7000 SERIES Gear Frames 74 - 79 - Double/Triple Reduction CM L V1 ES1 V ES Key Key1 XN U O ØU1 HS D G F B BA E (4)ØH E A LT S R INPUT CENTERLINE .657 Size 76 only Gear Frame A B D1 E F G H L O R S U 3 U1 3 V V1 BA ES ES1 XN KEY KEY1 74 7.63 7.68 4.53 2.655 6.50 .77 .53 12.32 8.32 4.49 4.02 1.250 .625 2.36 1.25 1.18 2.00 1.00 .394 1/4 Sq. 3/16 Sq. 75 7.63 7.68 4.53 2.655 6.50 .77 .53 12.72 8.32 4.49 4.02 1.375 .625 2.76 1.25 1.18 2.38 1.00 .394 5/16 Sq. 3/16 Sq. 76 9.26 9.05 5.12 2.955 7.68 .79 .55 15.23 10.13 5.95 4.84 1.375 1.125 2.76 2.25 1.18 2.41 1.94 N/A 5/16 Sq. 1/4 Sq. 77 9.26 9.65 5.51 3.345 8.07 1.04 .69 15.97 9.74 4.81 4.81 1.625 1.125 3.15 2.25 1.38 2.80 1.94 .768 3/8 Sq. 1/4 Sq. 78 11.42 11.68 7.09 4.23 10.24 1.29 .69 19.33 11.81 5.87 5.91 2.125 1.125 3.94 2.25 1.57 3.31 1.94 1.02 1/2 Sq. 1/4 Sq. 79 13.75 14.37 8.86 4.92 12.20 1.81 .87 23.72 14.96 7.03 7.05 2.375 1.375 4.72 2.75 1.58 4.06 2.31 1.14 5/8 Sq. 5/16 Sq. Motor Frame Gear Frame 1 Scoop Size 56, 145T 182/184T 213/215T 254/256T 284/286T CM HS LT CM HS LT CM HS LT CM HS LT CM HS LT 74 0 11.38 3.75 27.43 - - - - - - - - - - - - 75 0 11.38 3.75 27.83 - - - - - - - - - - - - 76 1 12.38 4.74 36.27 12.38 4.74 36.83 - - - - - - - - 77 1 12.38 4.74 37.01 12.38 4.74 37.57 - - - - - - - - - 78 2 12.75 5.56 40.96 12.75 5.56 39.96 12.75 5.56 40.33 - - - - - - 79 2 12.75 5.56 45.34 12.75 5.56 44.34 12.75 5.56 44.80 - - - 79 4 - - 7.44 48.17 17.00 - - - Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. - 17.00 2 3 7.44 49.09 17.00 - - 7.44 49.22 All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". 139 Concentric Input Shaft Reducer SERIES Gear Frame 71 - Double Reduction 7000 L .39 N1 V V1 Ø2.363 ES Key ES1 FLAT (4) M6-1 X .44 DP. N Ø3.937 FN XN O ØU1 ØU F D G BA (4) ØH B Gear Frame A B D 71 5.62 5.16 2.95 Gear Frame 71 1 U 3 .750 U1 3 .500 1 E A E F G H L N N1 O 2.165 4.33 .47 .35 9.45 1.72 1.12 6.01 V V1 BA ES ES1 FN XN Key 1.57 1.00 .72 1.25 .87 .455 .276 3/16 Sq. Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. 140 E 2 3 All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". Concentric Input Shaft Reducer 7000 SERIES Gear Frames 72 - 79 - Double/Triple Reduction L N1 N V1 V ES1 ES Key Key1 XN U O ØU1 D G F BA E (4) ØH B E A INPUT CENTERLINE S R .657 Size 76 only Gear Frame D1 E 6.33 3.54 2.165 5.12 7.68 4.53 2.655 6.50 7.63 7.68 4.53 2.655 6.50 .77 9.26 9.05 5.12 2.955 7.68 .79 A B 72, 73 6.50 74 7.63 75 76 G H L N N1 .63 .35 .77 .53 O R S 10.68 2.11 1.29 12.32 2.54 1.29 6.71 3.35 3.47 8.32 4.49 4.02 .53 12.72 2.94 1.29 8.32 4.49 4.02 .55 15.23 2.84 2.31 10.13 5.95 4.84 77 9.26 9.65 5.51 3.345 8.07 1.04 .69 15.97 3.36 2.31 9.74 4.81 4.81 78 11.42 11.68 7.09 4.23 10.24 1.29 .69 19.33 4.12 2.37 11.81 5.87 5.91 79 13.75 14.37 8.86 4.92 12.20 1.81 .87 23.72 5.03 2.92 14.96 7.03 7.05 Gear Frame 1 F U 3 U1 3 V V1 BA ES ES1 XN Key Key1 1/4 Sq. 3/16 Sq. 72, 73 1.000 .625 1.97 1.25 .98 1.50 1.00 .335 74 1.250 .625 2.36 1.25 1.18 2.00 1.00 .394 1/4 Sq. 3/16 Sq. 75 1.375 .625 2.76 1.25 1.18 2.38 1.00 .394 5/16 Sq. 3/16 Sq. 76 1.375 1.125 2.76 2.25 1.18 2.41 1.94 N/A 5/16 Sq. 1/4 Sq. 1/4 Sq. 77 1.625 1.125 3.15 2.25 1.38 2.80 1.94 .768 3/8 Sq. 78 2.125 1.125 3.94 2.25 1.57 3.31 1.94 1.02 1/2 Sq. 1/4 Sq. 79 2.375 1.375 4.72 2.75 1.58 4.06 2.31 1.14 5/8 Sq. 5/16 Sq. Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. 2 3 All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". 141 Concentric Input Shaft Reducer SERIES Gear Frames 74 - 79 - Combined Reduction 7000 L N1 N V1 ES1 V ES Key Key1 XN U O ØU1 D G FLAT ES1 F FN B BA ØU1 INPUT CENTERLINE E (4)ØH E A S R .657 Size 74-77 only Size 76 only Gear Frame A B D1 E F G H L N N1 O R S 74 7.63 7.68 4.53 2.655 6.50 .77 .53 17.20 2.54 1.12 8.32 4.49 4.02 75 7.63 7.68 4.53 2.655 6.50 .77 .53 17.60 2.94 1.12 8.32 4.49 4.02 76 9.26 9.05 5.12 2.955 7.68 .79 .55 18.53 2.84 1.12 10.13 5.95 4.84 77 9.26 9.65 5.51 3.345 8.07 1.04 .69 19.11 3.36 1.12 9.74 4.81 4.81 78 11.42 11.68 7.09 4.23 10.24 1.29 .69 24.46 4.12 1.29 11.81 5.87 5.91 79 13.75 14.37 8.86 4.92 12.20 1.81 .87 27.22 5.03 1.29 14.96 7.03 7.05 3 U1 Gear Frame 1 U 3 V V1 BA ES ES1 FN XN Key1 74 1.250 .500 2.36 1.00 1.18 2.00 .87 .46 .118 1/4 Sq. N/A 75 1.375 .500 2.76 1.00 1.18 2.38 .87 .46 .118 5/16 Sq. N/A N/A 76 1.375 .500 2.76 1.00 1.18 2.41 .87 .46 .276 5/16 Sq. 77 1.625 .500 3.15 1.00 1.38 2.80 .87 .46 .492 3/8 Sq. N/A 78 2.125 .625 3.94 1.25 1.57 3.31 1.00 N/A 1.355 1/2 Sq. 3/16 Sq. 79 2.375 .625 4.72 1.25 1.58 4.06 1.00 N/A 1.475 5/8 Sq. 3/16 Sq. Dimension “D” will never be exceeded, but may vary from values shown. When exact dimensions are required, shims up to .03" may be necessary. 142 Key 2 3 All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". Concentric Top Mount Reducer SERIES Gear Frames 74 - 79 - Double/Triple Reduction CM LT HT 7000 LS CENTER DISTANCE N ES ES1 Key1 HS Key XN U ØU1 V V1 D N1 G F BA E (4) ØH B L Gear Frame A B D 1 E S R F G H L N N1 R S U 3 U1 3 74 7.63 7.68 4.53 2.655 6.50 .77 .53 12.32 2.54 1.29 4.49 4.02 1.250 .625 75 7.63 7.68 4.53 2.655 6.50 .77 .53 12.72 2.94 1.29 4.49 4.02 1.375 .625 77 9.26 9.65 5.51 3.345 8.07 1.04 .69 15.97 3.36 2.31 4.81 4.81 1.625 1.125 78 11.42 11.68 7.09 4.23 10.24 1.29 .69 19.33 4.12 2.37 5.87 5.91 2.125 1.125 79 13.75 14.37 8.86 4.92 12.20 1.81 .87 23.72 5.03 2.92 7.03 7.05 2.375 1.375 Gear Frame V V1 BA ES ES1 CM LS LT XN KEY KEY1 74 2.36 1.25 1.18 2.00 1.00 16.50 7.14 1.64 7.61 1.29 15.50 .394 1/4 Sq. 3/16 Sq. 75 2.76 1.25 1.18 2.38 1.00 16.50 7.14 1.64 7.61 1.29 15.50 .394 5/16 Sq. 3/16 Sq. 77 3.15 2.25 1.38 2.80 1.94 16.50 7.17 1.64 7.61 2.31 15.50 .768 3/8 Sq. 1/4 Sq. 78 3.94 2.25 1.57 3.31 1.94 16.50 8.48 1.89 7.36 2.35 15.50 1.02 1/2 Sq. 1/4 Sq. 79 4.72 2.75 1.58 4.06 2.31 20.00 10.48 1.89 7.36 2.72 20.25 1.14 5/8 Sq. 5/16 Sq. HS HT Min. Max. Center Distance 74, 75 Motor Frame 56 1 E A Center Distance 77 78 79 Min. Max. Min. Max. Min. Max. Min. Max. 12.28 18.25 12.31 18.28 13.87 19.34 - - 143T, 145T 12.28 18.25 12.31 18.28 13.87 19.34 15.87 21.34 182T, 184T 13.28 19.25 13.31 19.28 14.87 20.34 16.87 22.34 213T, 215T - - 14.06 20.03 15.62 21.09 17.62 23.09 254T, 256T - - - - 16.62 22.09 18.62 24.09 284T, 286T - - - - - - 19.37 24.84 Dimension “D” represents the maximum value; shims up to .03" may be necessary for more precise control of this dimension. 2 3 All rough casting dimensions may vary by .25" due to casting variations. Shaft extension tolerance: +.0000"; –.0005" up to 1.5" diameter inclusive. Larger diameters: +.000"; –.001". 143 Concentric Gear Reducer SERIES Gear Frame 71 Flange Dimensions 7000 AH ØAJ BB (4) ØBF BE 45° ØBD ØAK BA Flange Type 2 AH AJ AK BB BD BE BF BD1 1.52 3.94 3.15 .65 .12 4.72 .28 .28 BS 1.52 4.53 3.74 .65 .12 5.51 .31 .35 All rough casting dimensions may vary by .25" due to casting variations. 144 BA Concentric Gear Reducer SERIES Product Weights (Lbs.) 7000 Foot Mounted Multiple Reduction C-Face Reducers Gear Frame Input Size Stages 56/140TC 180/210TC 250TC 280TC 320TC Gear Frame Style Stages AP Scoop Top Mt. 71 2 21 - - - - 71 2 19 - - 72 2,3 47 58 - - - 72 2,3 39 - - 73 2,3 47 58 - - - 73 2,3 39 - - 2,3 54 63 - - - 2,3 47 72 94 4,5 60 - - - - 4,5 52 - - 2,3 54 63 - - - 2,3 47 72 94 4,5 60 - - - - 2,3 85 94 101 - - 74 75 76 77 78 79 146 Input Shaft 4,5 90 - - - - 2,3 85 94 101 - - 4,5 90 - - - - 2,3 93 95 98 100 - 4,5 130 - - - - 2,3 160 163 166 168 178 4,5 197 205 - - - 74 75 76 77 78 79 4,5 52 - - 2,3 80 113 - 4,5 85 - - 2,3 82 115 129 4,5 87 - - 2,3 103 155 173 4,5 153 - - 2,3 201 253 175 4,5 238 - - Concentric General Information SERIES A Guide to NEMA Motor Frames and Shaft Dimensions 7000 Motor ratings and dimensions shown in Table No. 1, below, are for general purpose motors as indicated. Frames for the 1952 - 1953 and the 1964 rerates are shown. All dimensions are subject to change without notice. Those shown are intended as a guide only. Certified dimension drawings from the motor manufacturer should be used. Table No. 1 Frame No. Specifications Dimensions A Max. B Max. D Keyseat E F H BA N-W U Width Depth Key Length HP for Various Motor RPM 3600 1800 1200 900 Fractional Horsepower Motors 48 5 3/8" 3 1/2" 3" 2 1/8" 1 3/8" 11/32 "s I 2 1/2" 1 1/2" 1/2" Flat 3/64" - 1/8-1/2 1/8-1/3 1/6 - 56 6 1/2 4 1/2 3 1/2 2 7/16 1 1/2 11/32 I 2 3/4 17/8 5/8 3/16" 3/32 1 3/8" 3/4-1 1/3-1 1/8-1/2 - 1952-53 Rerate -- Designs A, B and C -- Open Type -- Squirrel Cage -- Integral H.P. Motors 182 184 213 215 254U 9 9 10 1/2 10 1/2 12 1/2 6 1/2 7 1/2 7 1/2 9 10 3/4 4 1/2 4 1/2 5 1/4 5 1/4 6 1/4 3 3/4 3 3/4 4 1/4 4 1/4 5 2 1/4 2 3/4 2 3/4 3 1/2 4 1/8 13/32 13/32 13/32 13/32 17/32 2 3/4 2 3/4 3 1/2 3 1/2 4 1/4 2 1/4 2 1/4 3 3 3 3/4 7/8 7/8 1 1/8 1 1/8 1 3/8 3/16 3/16 1/4 1/4 5/16 3/32 3/32 1/8 1/8 5/32 1 3/8 1 3/8 2 2 2 3/4 1 1/2 3,2 5 7 1/2 10 1 2,1 1/2 3 5 7 1/2 3/4 1 1/2,1 2 3 5 1/2 3/4 1 1/2,1 2 3 256U 284U 286U 324U 324S* 12 1/2 14 14 16 16 12 1/2 12 1/2 14 14 14 6 1/4 7 7 8 8 5 5 1/2 5 1/2 6 1/4 6 1/4 5 4 3/4 5 1/2 5 1/4 5 1/4 17/32 17/32 17/32 21/32 21/32 4 1/4 4 3/4 4 3/4 5 1/4 5 1/4 3 3/4 4 7/8 4 7/8 5 5/8 3 1/4 1 3/8 1 5/8 1 5/8 1 7/8 1 5/8 5/16 3/8 3/8 1/2 3/8 5/32 3/16 3/16 1/4 3/16 2 3/4 3 3/4 3 3/4 4 1/4 1 7/8 15 20 25 30 10 15 20 25 - 7 1/2 10 15 - 5 7 1/2 10 - 326U 326S* 364U 364US* 365U 16 16 18 18 18 15 1/2 15 1/2 15 1/4 15 1/4 16 1/4 8 8 9 9 9 6 1/4 6 1/4 7 7 7 6 6 5 5/8 5 5/8 6 1/8 21/32 21/32 21/32 21/32 21/32 5 1/4 5 1/4 5 7/8 5 7/8 5 7/8 5 5/8 3 1/4 6 3/8 3 3/4 6 3/8 1 7/8 1 5/8 2 1/8 1 7/8 2 1/8 1/2 3/8 1/2 1/2 1/2 1/4 3/16 1/4 1/4 1/4 4 1/4 1 7/8 5 2 5 40 50 - 30 40 - 20 25 30 15 20 25 365US* 404U 404US* 405U 405US* 18 20 20 20 20 16 1/4 16 1/4 16 1/4 17 3/4 17 3/4 9 10 10 10 10 7 8 8 8 8 6 1/8 6 1/8 6 1/8 6 7/8 6 7/8 21/32 13/16 13/16 13/16 13/16 5 7/8 6 5/8 6 5/8 6 5/8 6 5/8 3 3/4 7 1/8 4 1/4 7 1/8 4 1/4 1 7/8 2 3/8 2 1/8 2 3/8 2 1/8 1/2 5/8 1/2 5/8 1/2 1/4 5/16 1/4 5/16 1/4 2 5 1/2 2 3/4 5 1/2 2 3/4 60 75 100 50 60 75 40 50 - 30 40 - 444U 444US* 445U 445US* 22 22 22 22 1 18 1/2 20 1/2 20 1/2 11 11 11 11 9 9 9 9 7 1/4 7 1/4 8 1/4 8 1/4 13/16 13/16 13/16 13/16 7 1/2 7 1/2 7 1/2 7 1/2 8 5/8 4 1/4 8 5/8 4 1/4 2 3/8 2 1/8 2 3/8 2 1/8 3/4 1/2 3/4 1/2 3/8 1/4 3/8 1/4 7 2 3/4 7 2 3/4 125 150 100 125 60 75 - 50 60 - 1964 Rerate -- Designs A, B and C -- Open Type -- Squirrel Cage -- Integral H.P. Motors H143T H145T K145T 182T 184T 7 7 7 9 9 6 6 6 6 1/2 7 1/2 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 2 3/4 2 3/4 2 3/4 3 3/4 3 3/4 2 2 1/4 2 1/2 2 1/4 2 3/4 11/32 11/32 11/32 13/32 13/32 2 1/4 2 1/4 2 1/4 2 3/4 2 3/4 2 1/4 2 1/4 2 1/4 2 3/4 2 3/4 7/8 7/8 7/8 1 1/8 1 1/8 3/16 3/16 3/16 1/4 1/4 3/32 3/32 3/32 1/8 1/8 1 3/8 1 3/8 1 3/8 1 3/4 1 3/4 1 1/2 3,2 5 7 1/2 1 1 1/2 2 3 5 3/4 1 1 1/2 2 1/2 3/4 1 1 1/2 213T 215T 254T 256T 284T 10 1/2 10 1/2 12 1/2 12 1/2 14 7 1/2 9 10 3/4 12 1/2 12 1/2 5 1/4 5 1/4 6 1/4 6 1/4 7 4 1/4 4 1/4 5 5 5 1/2 2 3/4 3 1/2 41/8 5 4 3/4 13/32 13/32 17/32 17/32 17/32 3 1/2 3 1/2 4 1/4 4 1/4 4 3/4 33/8 33/8 4 4 4 5/8 1 3/8 1 3/8 1 5/8 1 5/8 1 7/8 5/16 5/16 3/8 3/8 1/2 5/32 5/32 3/16 3/16 1/4 2 3/8 2 3/8 2 7/8 2 7/8 3 1/4 10 15 20 25 - 7 1/2 10 15 20 25 3 5 7 1/2 10 15 2 3 5 7 1/2 10 284TS* 286T 286TS* 324T 324TS* 14 14 14 16 16 12 1/2 14 14 14 14 7 7 7 8 8 5 1/2 5 1/2 5 1/2 6 1/4 6 1/4 4 3/4 5 1/2 5 1/2 5 1/4 5 1/4 17/32 17/32 17/32 21/32 21/32 4 3/4 4 3/4 4 3/4 5 1/4 5 1/4 3 1/4 4 5/8 3 1/4 5 1/4 3 3/4 1 5/8 1 7/8 1 5/8 2 1/8 1 7/8 3/8 1/2 3/8 1/2 1/2 3/16 1/4 3/16 1/4 1/4 1 7/8 3 1/4 1 7/8 3 7/8 2 30 40 50 30 40 - 20 25 - 15 20 - 326T 326TS* 364T 364TS* 365T 16 16 18 18 18 15 1/2 15 1/2 15 1/4 15 1/4 16 1/4 8 8 9 9 9 6 1/4 6 1/4 7 7 7 6 6 5 5/8 5 5/8 6 1/8 21/32 21/32 21/32 21/32 21/32 5 1/4 5 1/4 5 7/8 5 7/8 5 7/8 5 1/4 3 3/4 5 7/8 3 3/4 5 7/8 2 1/8 1 7/8 2 3/8 1 7/8 2 3/8 1/2 1/2 5/8 1/2 5/8 1/4 1/4 5/16 1/4 5/16 3 7/8 2 4 1/4 2 4 1/4 60 75 - 50 60 75 30 40 50 25 30 40 365TS* 404T 404TS* 405T 405TS* 18 20 20 20 20 16 1/4 16 1/4 16 1/4 17 3/4 17 3/4 9 10 10 10 10 7 8 8 8 8 6 1/8 6 1/8 6 1/8 6 7/8 6 7/8 21/32 13/16 13/16 13/16 13/16 5 7/8 6 5/8 6 5/8 6 5/8 6 5/8 3 3/4 7 1/4 4 1/4 7 1/4 4 1/4 1 7/8 2 7/8 2 1/8 2 7/8 2 1/8 1/2 3/4 1/2 3/4 1/2 1/4 3/8 1/4 3/8 1/4 2 5 5/8 2 3/4 5 5/8 2 3/4 100 125 150 100 125 - 60 75 - 50 60 - 7 1/4 7 1/4 8 1/4 8 1/4 only. 13/16 13/16 13/16 13/16 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 4 3/4 8 1/2 4 3/4 3 3/8 2 3/8 3 3/8 2 3/8 7/8 5/8 7/8 5/8 7/16 5/16 7/16 5/16 6 7/8 3 6 7/8 3 200 250 150 200 100 125 - 75 100 - 444T 444TS* 445T 445TS* 22 18 1/2 22 18 1/2 22 20 1/2 22 20 1/2 * These motors are for V Slots. 11 9 11 9 11 9 11 9 direct coupled service 157 STANDARD SOLUTIONS Complete Gearing Solutions... Emerson Power Transmission Has the Industry’s Broadest Line of Standard Gearmotors and Speed Reducers CbN In-line Concentric Gearmotor Cobra™ Worm Gear Reducer MbN Helical Shaft Mount Gearmotor Motorized Conveyor Pulley PoweRgear© Worm Gear Reducer 158 Power-Match Plus Helical Parallel Shaft Gear Reducer TORQ TAPER® Plus Shaft Mount Speed Reducer MODIFIED STANDARD SOLUTIONS One Source From Specification Review to Gear Type Selection and Design Modification Emerson Power Transmission has the capability to analyze your requirements and select your gearbox. We will incorporate aspects of your operational needs into gear selection or design and recommend a comprehensive solution. In addition to your standard or custom speed reducer requirements, Emerson Power Transmission can also design and supply complete drive systems including: • • • • • Emerson motors and controls Browning belt drives and accessories Morse® clutches and chain drives Kop-Flex® couplings Sealmaster® bearings Single source responsibility results in an efficient, smoothly operating drive, one warranty and one purchase order. 159 All sales are made on our STANDARD TERMS AND CONDITIONS OF SALE in effect at the time a customer’s order is accepted. The current Terms and Conditions are set forth below: STANDARD TERMS AND CONDITIONS OF SALE (August 15, 2001) These Terms and Conditions, the attendant quotation or acknowledgment and all documents incorporated by specific reference therein, will be the complete and exclusive statement of the terms of the agreement governing the sale of goods (“Goods”) by Emerson Power Transmission Corporation and its divisions and subsidiaries (“Seller”) to Customer (“Buyer”). Buyer’s acceptance of the Goods will manifest Buyer’s assent to these Terms and Conditions. If these Terms and Conditions differ in any way from the terms and conditions of Buyer’s order, or other documentation, this document will be construed as a counteroffer and will not be deemed an acceptance of Buyer’s terms and conditions which conflict herewith. 1. PRICES: Unless otherwise specified in writing by Seller, Seller’s price for the goods It is expressly understood that any technical advice furnished by Seller with respect to shall remain in effect for thirty (30) days after the date of Seller’s quotation or acknowlthe use of the Goods is given without charge, and Seller assumes no obligation or edgment of Buyer’s order for the Goods, whichever occurs first, provided an uncondiliability for the advice given, or results obtained, all such advice being given and actional, complete authorization for the immediate shipment of the Goods is received and cepted at Buyer’s risk. accepted by Seller within such time period. If such authorization is not received by GOODS AND/OR SERVICES SOLD HEREUNDER ARE NOT FOR USE IN ANY Seller within such thirty (30) day period, Seller shall have the right to change the price NUCLEAR AND RELATED APPLICATIONS. Buyer accepts goods and/or services for the Good to Seller’s price for the Goods at the time of shipment. with the foregoing understanding, agrees to communicate the same in writing to any 2. TAXES: Any tax or governmental charge or increase in same hereafter becoming subsequent purchaser or users and to defend, indemnify and hold harmless Seller from effective increasing the cost to Seller of producing, selling or delivering the Goods or of any claims, losses, suits, judgments and damages, including incidental and consequenprocuring material used therein, and any tax now in effect or increase in same payable tial damages, arising from such use, whether the cause of action be based in tort, by the Seller because of the manufacture, sale or delivery of the Goods, may at Seller’s contract or otherwise, including allegations that the Seller's liability is based on option, be added to the price. negligence or strict liability. 3. TERMS OF PAYMENT: Subject to the approval of Seller’s Credit Department, terms 8. EXCUSE OF PERFORMANCE: Seller shall not be liable for delays in performance are net thirty (30) days from date of Seller’s invoice in U.S. currency. If any payment or for non-performance due to acts of God, acts of Buyer, war, riot, fire, flood, other owed to Seller is not paid when due, it shall bear interest, at a rate to be determined by severe weather, sabotage, or epidemics; strikes or labor disturbances; governmental Seller, which shall not exceed the maximum rate permitted by law, from the date on requests, restrictions, laws, regulations, orders or actions; unavailability of or delays in which it is due until it is paid. Seller shall have the right, among other remedies, either transportation; default of suppliers; or unforeseen circumstances or any events or causes to terminate the Agreement or to suspend further performance under this and/or other beyond Seller’s reasonable control. Deliveries may be suspended for an appropriate agreements with Buyer in the event Buyer fails to make any payment when due. Buyer period of time as a result of the foregoing. If Seller determines that its ability to supply shall be liable for all expenses, including attorneys’ fees, relating to the collection of the total demand for the Goods, or to obtain material used directly or indirectly in the past due amounts. manufacture of the Goods, is hindered, limited or made impracticable due to causes 4. SHIPMENT AND DELIVERY: Shipments are made F.O.B. Seller’s shipping point. addressed in this Section 8, Seller may allocate its available supply of the Goods or Any claims for shortages or damages suffered in transit shall be submitted by the such material (without obligation to acquire other supplies of any such Goods or mateBuyer directly to the carrier. While Seller will use all reasonable commercial efforts to rial) among itself and its purchasers on such basis as Seller determines to be equitable maintain the delivery date acknowledged or quoted by Seller, all shipping dates are without liability for any failure of performance which may result therefrom. Deliveries approximate. Seller reserves the right to make partial shipments and to segregate suspended or not made by reason of this section may be canceled by Seller upon “specials” and made-to-order Goods from normal stock Goods. Seller shall not be notice to Buyer without liability, but the balance of the agreement shall otherwise rebound to tender delivery of any Goods for which Buyer has not provided shipping main unaffected. instructions. 9. CANCELLATION: The Buyer may cancel orders only upon written notice and upon 5. QUANTITY: Buyer agrees to accept overruns of up to ten percent (10%) of the order payment to Seller of cancellation charges which include, among other things, all costs on “made-to-order” Goods, including parts. Any such additional items shall be priced at and expenses incurred and commitments made by the Seller and a reasonable profit the price per item charged for the specific quantity ordered. thereon. 6. LIMITED WARRANTY: Subject to the limitations of Section 7, Seller warrants that 10. CHANGES: Buyer may request changes or additions to the Goods consistent with the Goods will be free from defects in material and workmanship under normal use, Seller’s specifications and criteria. In the event such changes or additions are acservice and maintenance for a period of one year (unless otherwise specified by Seller cepted by Seller, Seller may revise the price and delivery schedule. Seller reserves the in writing) from the date of shipment of the Goods by Seller. THIS IS THE SOLE AND right to change designs and specifications for the Goods without prior notice to Buyer, EXCLUSIVE WARRANTY GIVEN BY SELLER WITH RESPECT TO THE GOODS except with respect to Goods being made-to-order for Buyer. AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR 11. TOOLING: Tool, die, and pattern charges, if any, are in addition to the price of the IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING WITHGoods and are due and payable upon completion of the tooling. All such tools, dies OUT LIMITATION, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURand patterns shall be and remain the property of Seller. Charges for tools, dies, and POSE WHETHER OR NOT THE PURPOSE OR USE HAS BEEN DISCLOSED TO patterns do not convey to Buyer, title, ownership interests in, or rights to possession or SELLER IN SPECIFICATIONS, DRAWINGS OR OTHERWISE, AND WHETHER OR removal, nor prevent their use by Seller for other purchasers, except as otherwise NOT SELLER’S PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR MANUFACexpressly provided by Seller and Buyer in writing with reference to this provision. TURED BY SELLER FOR BUYER’S USE OR PURPOSE. This warranty does not extend to any losses or damages due to misuse, accident, 12. ASSIGNMENT: Buyer shall not assign its rights or delegate its duties hereunder or abuse, neglect, normal wear and tear, unauthorized modification or alteration, use beany interest therein or any rights hereunder without the prior written consent of the yond rated capacity, or improper installation, maintenance or application. To the extent Seller, and any such assignment, without such consent, shall be void. that Buyer or its agents has supplied specifications, information, representation of op13. PATENTS AND COPYRIGHTS: Subject to Section 7, Seller warrants that the Goods erating conditions or other data to Seller in the selection or design of the Goods and sold, except as are made specifically for Buyer according to Buyer’s specifications, do the preparation of Seller’s quotation, and in the event that actual operating conditions not infringe any valid U.S. patent or copyright in existence as of the date of delivery. or other conditions differ from those represented by Buyer, any warranties or other This warranty is given upon the condition that Buyer promptly notify Seller of any claim provisions contained herein which are affected by such conditions shall be null and or suit involving Buyer in which such infringement is alleged, and, that Buyer cooperate void. If within thirty (30) days after Buyer’s discovery of any warranty defects within the fully with Seller and permit Seller to control completely the defense or compromise of warranty period, Buyer notifies Seller thereof in writing, Seller shall, at its option, repair any such allegation of infringement. Seller’s warranty as to use only applies to infringeor replace F.O.B. point of manufacture, or refund the purchase price for, that portion of ments arising solely out of the inherent operation (i) of such Goods, or (ii) of any comthe goods found by Seller to be defective. Failure by Buyer to give such written notice bination of Goods in a system designed by Seller. In the event such Goods, singularly within the applicable time period shall be deemed an absolute and unconditional waiver or in combination, are held to infringe a U.S. patent or copyright in such suit, and the of Buyer’s claim for such defects. Goods repaired or replaced during the warranty use of such Goods is enjoined, or in the case of a compromise by Seller, Seller shall period shall be covered by the foregoing warranty for the remainder of the original have the right, at its option and expense, to procure for Buyer the right to continue warranty period or ninety (90) days, whichever is longer. Buyer assumes all other reusing such Goods, or replace them with non-infringing Goods; or modify same to besponsibility for any loss, damage, or injury to persons or property arising out of, concome non-infringing; or grant Buyer a credit for the depreciated value of such Goods nected with, or resulting from the use of Goods, either alone or in combination with and accept return of them. other products/components. 14. MISCELLANEOUS: These terms and conditions set forth the entire understanding SECTIONS 6 AND 7 APPLY TO ANY ENTITY OR PERSON WHO MAY BUY, ACand agreement between Seller and Buyer, and supersede all other communications, QUIRE OR USE SELLER’S GOODS, INCLUDING ANY ENTITY OR PERSON WHO negotiations and prior oral or written statements regarding the subject matter of these BUYS THE GOODS FROM SELLER’S DISTRIBUTOR AND SUCH ENTITY OR PERterms and conditions. No change, modification, rescission, discharge, abandonment, SON SHALL BE BOUND BY THE LIMITATIONS THEREIN. or waiver of these terms and conditions of Sale shall be binding upon the Seller unless 7. LIMITATION OF REMEDY AND LIABILITY: THE SOLE AND EXCLUSIVE REMmade in writing and signed on its behalf by an officer of the Seller. No conditions, EDY FOR BREACH OF ANY WARRANTY HEREUNDER (OTHER THAN THE WARusage or trade, course of dealing or performance, understanding or agreement purRANTY PROVIDED UNDER SECTION 13) SHALL BE LIMITED TO REPAIR, REporting to modify, vary, explain, or supplement these Terms and Conditions shall be PLACEMENT OR REFUND OF THE PURCHASE PRICE UNDER SECTION 6. binding unless hereafter made in writing and signed by the party to be bound, and no SELLER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERmodification shall be affected by the acceptance of purchase orders or shipping inFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM struction forms containing terms at variance with or in addition to those set forth herein. OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGAny such modifications or additional terms are specifically rejected by Seller. No waiver LIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL SELLER’S by Seller with respect to any breach or default or any right or remedy and no course of LIABILITY TO BUYER AND/OR ITS CUSTOMERS EXCEED THE PRICE TO BUYER dealing, shall be deemed to constitute a continuing waiver of any other breach or deOF THE SPECIFIC GOODS PROVIDED BY SELLER GIVING RISE TO THE CLAIM fault or of any other right or remedy, unless such waiver be expressed in writing and OR CAUSE OF ACTION. BUYER AGREES THAT IN NO EVENT SHALL SELLER’S signed by the party to be bound. Seller is not responsible for typographical or clerical LIABILITY TO BUYER AND/OR ITS CUSTOMERS EXTEND TO INCLUDE INCIerrors made in any quotation, orders or publications. All such errors are subject to DENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. THE TERM “CONSEQUENcorrection. The validity, performance, and all other matters relating to the interpretation TIAL DAMAGES” SHALL INCLUDE, BUT NOT BE LIMITED TO, LOSS OF and effect of this contract shall be governed by the law of the state of New York. The ANTICIPATED PROFITS, LOSS OF USE, LOSS OF REVENUE, COST OF CAPIUnited Nations Convention on the International Sale of Goods shall not apply to any TAL AND DAMAGE OR LOSS OF OTHER PROPERTY OR EQUIPMENT. transaction hereunder. 160 Industry’s Highest Overall Torque Rating • Rule of thumb – if the dimensions and ratio match, the torque and hp ratings are where they should be (review catalog for actual ratings) • Advanced gearing design gives Browning the highest overall torque density per frame size in the industry • When replacing older series competitive units, the Series 7000 line has 20 to 50 percent higher torque capacity so a replacement often lasts longer than the original unit sized by the OEM • For maximum durability, specify Series 7000 for your replacement gearbox Highly Modular • Patented, modular, taper connection so that one spare of each motor hp size in the plant will allow replacement of that hp on any frame size of the Series 7000 gearmotor – so users can keep fewer spares in stock • Taper connection makes motor replacement easy, eliminating the need for draining the oil or breaking open the gearcase Innovative, self-locking, tapered shaft connection between motor and shaft.