eLLK/M 92 LED 400/800

advertisement

eLLK/M 92 LED 400/800

Explosion-protected Linear LED Light Fitting for Zone 1 and 21

Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

LINEAR LED LIGHT FITTING

NEW - linear LED Module for eLLK/M 92 Series Cooper Crouse-Hinds has designed a revolutionary module with LED light source to fit into existing eLLK/M 92018/18 and eLLK/M 92036/36. This converts a traditional fluorescent light fitting into an LED light. The LED module allows also a retrofit of already installed eLLK/M 92 with the latest genera tion electronic ballast (EVG 09).

A special designed reflector system prevents disability glare at low mounting heights. This also directs the light output of the high power LED chips to the working area respective measuring plane avoiding multi shadowing and light pollution.

The LED system design and certification allows the use in the well proven Ex e technology of eLLK/M 92. With the use of our electronic ballast EVG 09 as the driver we can refer to 20 years successful operation in harsh and hazardous environments.

The advantages of the LED Module: • Environmental friendly, no mercury • Shock and vibration resistant, no filament or glass to break • Immediate start, instant full illumination • No life time reduction due to switching cycles • Reduced disposal costs Energy and cost savings • 20% energy savings compared to fluorescent lamps • Additional energy savings by operating on demand (Night-/day and presence-mode) • Reduced maintenance costs compared to standard fluorescent lamps • Lower overall cost of ownership Operating life • Expected operating life of a Cooper Crouse-Hinds LED module is 60,000 hours. This is a significant upgrade over traditional light sources.

• Heat sinks are specifically engineered to remove heat from the LEDs to ensure longer life, better lumen output and accurate colour temperature.

• Fully operational with CG-S modules for connection to CEAG central battery emergency lighting systems.

2 Can be retrofit into existing light fitting type eLLK/M 92 018/18 or eLLK/M 92036/36 (latest version) Energy savings 20 % compared to fluorescent versions Special reflector design with indirect light output to avoid disability glare and multi shadowing Well-proven driver technology of the used EVG 09 for more than 20 years Selected LED chips with perfect binning, low power dissipation and long life span Ex-e technoloy for easy maintenance For environmental temperatures from -25 °C up to +45 °C Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

eLLK/M 92 LED 400/800

LED 400 module

Te c h n i c a l D a t a

eLLK/M 92 LED 400 / eLLK/M 92 LED 800 Marking to 94/9/EC EC-Type Examination Certificate IECEx-Certification of conformity Marking to IECEx Rated voltage II 2 G Ex d e mb IIC T4 Gb II 2 D Ex tb IIIC T80 °C Db IP66 BVS 09 ATEX E 034 IECEx BVS 09.0033

Ex d e mb IIC T4 Gb/ Ex tb IIIC T80 °C Db 110 - 254 V AC, 110 - 250 V DC eLLK 92 LED 400 Permissable ambient temperature Lifetime Power factor cos Driver Connecting terminals Insulation class Light colour CRI Iluminance at measurement plane Degree of protection accd. EN 60529 Cable glands/Gland plates/Enclosure drilling Enclosure material Protective cover/protective bowl –25 °C up to +45 °C L 70 = 60,000 h at t a = 25 °C >0.95

I EVG 09 L1, L2, L3, N, PE; max. 2 x 6 mm² per terminal 4000 K >75 equivalent to related fluorescent tubes IP 66 Ex-e cable glands M25 x 1.5 (plastic) for cables Ø 8 - 17 mm Option: M20 x 1.5 metal thread Glass fibre reinforced polyester Polycarbonate Rated current Lamp/Illuminant Dimensions (L x W x H) Weight LED Module Marking to 94/9/EC EC-Type Examination Certificate Marking to IECEx IECEx-Certification of conformity Dimensions Weight eLLK/M 92 LED 400 0.15 A LED module 2 x 13 W 760 x 188 x 130 mm 6.9 kg LED 400 II 2 G Ex e mb IIC Gb BVS 13 ATEX E 018 U Ex e mb IIC Gb IECEx BVS 13.0030 U to fit into eLLK/M 92 018/18 1.7 kg eLLK/M 92 LED 800 0.25 A LED module 2 x 26 W 1360 x 188 x 130 mm 10.7 kg LED 800 II 2 G Ex e mb IIC Gb BVS 13 ATEX E 018 U Ex e mb IIC Gb IECEx BVS 13.0030 U to fit into eLLK/M 92 036/36 3.3 kg Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

3

LINEAR LED LIGHT FITTING

LED 400 module

O rd e r i n g d e t a i l s

Type Terminals eLLK 92 LED 400 1/6-1 2/6-2 1/6-1 M 1 ) 2/6-2 M 1 ) eLLM 92 LED 400 1 x 6 2 x 6 1 x 6 2 x 6 1/6-1 eLLK 92 LED 800 1/6-1 2/6-2 1/6-1 M 1 ) 1 x 3 1 x 6 2 x 6 1 x 6 2 x 6 2/6-2 M 1 ) eLLM 92 LED 800 1/6-1 LED Module 1 x 3 LED-Module 400 for eLLK/M 92 018/18, packed LED-Module 800 for eLLK/M 92 036/36, packed 1) M: with metal thread, without cable gland 2) With dustcover if entry/thread is not closed Scope of delivery without fixing accessories.

D i m e n s i o n d r a w i n g

eLLK 92 LED 400 eLLK 92 LED 800 x x Through-wiring single-ended double-ended x x x x x x Cable glands 2 ) 2 x M25 x 1.5

2 x M25 x 1.5

2 x M20 x 1.5

4 x M20 x 1.5

1 x M25 x 1.5

2 x M25 x 1.5

2 x M25 x 1.5

2 x M20 x 1.5

4 x M20 x 1.5

1 x M25 x 1.5

3.5

M25 x 1.5

13 W = 732 26 W = 1332 13 W = 400 26 W = 700 hexagon A/F 13 M8, 14 deep 4 eLLM 92 LED 800 Plugs 1 x blanking 2 x threated 1 x threated 2 x threated 1 x blanking 2 x threated 1 x threated 2 x threated 188 46 eLLM 92 LED 400 Order No 1 2265 500 101 1 2265 500 103 1 2265 500 109 1 2265 500 111 1 2268 500 101 1 2266 500 101 1 2266 500 103 1 2266 500 109 1 2266 500 111 1 2269 500 101 1 2255 213 501 1 2256 226 501 13 W = 760 26 W = 1360 eLLK 92 LED 400/800 33 150 Hexagon A/F 13 eLLM 92 LED 800 1060 = 13 W 1660 = 26 W 188 44 33 20 150 eLLM 92 LED 400/800    736 = 13 W 1336 = 26 W Hexagon A/F 13 eLLM 92 LED 400 33 Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

eLLK/M 92 LED 400/800

LED 400 module

P o l a r c u r v e

eLLK 92 LED 400 90 75 60 C 0 C90 45 30 P o l a r c u r v e eLLK/M 92 LED 400 90 15 125 250 375 500 625 0 15 30 45 60 75 l/cd eLLK 92 LED 800 eLLM 92 LED 800 eLLM 92 LED 400 P o l a r c u r v e eLLK/M 92 LED 800 90 75 60 45 30 15 250 500 750 1000 1250 0 15 C 0 C90 30 45 l/cd 90 60 75 6 m 0,5 1,0 2,0 4 2 0 0,5 1,0 -2 2,0 5,0 10 -4 5,0 10 5,0 -6 -10 m -8 0,5 1,0 -6 2,0 -4 2,0 -2 0 5,0 10 2,0 5,0 1,0 0,5 2 2,0 1,0 0,5 0 ISO-Lux diagram 6 m eLLK 92 LED 400 4 mounting height: 6 m maintenance factor: 0.8

-2 2 2,0 4 -4 6 1,0 0,5 8 10 m -6 Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

5

OVERVIEW LED LIGHTING

Refinery High power LED technology from Cooper Crouse-Hinds

Leading the way in LED technology for hazardous area lighting Cooper Crouse-Hinds offers a broad portfolio of LED luminaires for any hazardous or industrial applications Robust construction ensures highest safety and reliability suitable for application indoors/outdoors for the harshest environments Perfectly combining safety, reliability and energy efficiency

Heavy Industry Chemical plants Designed for hazardous applications Offshore

6

Optimal LED quality

Shock- and vibration- resistant solid-state devices have no fil aments or glass components that could break, greatly reduc ing the risk of premature failure No UV or IR radiation: Immediate start, provides instant and full illumination Variance of colour temperature to meet the various applica tions of our customers No negative influence on lifetime from switching cycles Disposal – LEDs contain no mercury or other hazardous sub stances, thereby reducing disposal costs and limiting future li ability.

Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

Environmentally friendly

LEDs do not contain mercury or other hazardous substances, thereby reducing disposal costs and being environmental friendly Meets rising environmental standards Helps to save energy costs and to reduce CO 2 footprint Low weight Comparison Conventional Lamps vers. LED-Light Sources Energy Consumption and Savings

400W 250W

137 98 98 295 295 455 Metal Halide

70%

High Pressure Sodium Metal Halide

= LED 67% 67% 88% 200W

25

175W 150W

98 98 200 188 210 Incandescent High Pressure Sodium Metal Halide

100W

63 130 63 120 High Pressure Sodium Metal Halide

48% 53% 52% 48% 70W

0 47 93 47 84 High Pressure Sodium Metal Halide 100 200 300 400 500

Energy Consumption (Watts) 49% 44%

Energy and cost savings

LED luminaires on average consume 50% less energy than HID luminaires and 85% less energy than incandescent luminaires.

LED luminaires provide higher lumens per watt compared to many traditional lighting technologies (incandescent, compact fluorescent, HID).

LED reduces the high maintenance costs associated with tradi tional lamps and frequent lamp changes Cut overall cost of ownership • Cooper Crouse-Hinds’ LED luminaires provide the same or better light output at a fraction of the energy. 6000

Operating life

5000 4000 3000 2000

LED

MH = 15,000 hours

= 60,000 hours

HPS

= 24,000 hours Expected operating life of a Cooper Crouse-Hinds LED lumi naire is 60,000 hours. This is a significant upgrade over tradi tional light sources, such as incandescent and HID.

Heat sinks are specifically engineered to remove heat from the LEDs and driver to ensure longer life, better lumen output and accurate colour temperature.

1000 0 0 20,000 40,000 60,000 80,000 100,000

Lamp Life (hours)

• LED maintains 70% of initial lumen output at end of rated life • HID has ~50% failure rate at end of rated life Shock and vibration resistant light source Minimal early failures Cooper Crouse-Hinds GmbH Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, [email protected], www.malux.fi

7

Download