PRODUCT DATA
DEFINITION
The Leviton Renoir™ II line of architectural
wall box dimmers support all load types and
configurations.
Performance, aesthetics, multi-location
dimming and multi-gang capabilities make
Renoir II a highly functional, yet elegant
solution for architectural dimming control.
COLOR CHANGE KITS & MADE-TO-ORDER
WALLPLATES
Each device is supplied with a white single
gang plate. For purchase of replacement
plates or plates in an alternate color, please
consult the chart below.
Stock wallplates are available for 1-2
dimmers. Custom and/or made-to-order
plates are available for other configurations,
see ordering key and wallplate chart for
more information. Custom wallplates may
have a lead time please contact customer
service for information.
WALLPLATES ORDERING KEY
Each device is supplied with a white, single gang plate. For purchase of replacement plates
or plates in an alternate color, please consult the diagram below.
-
AWPO
FINS
F = All fins on
0 = Fins to be
removed when
possible
NARROW
DIMMERS
0-6
supported*
WIDE
DIMMERS
0-4
supported*
(allows for
narrowest
possible
installation)
COLOR
E = Black
G = Gray
I = Ivory
T = Light Almond
W = White
*Ganged dimmers may require de-rating. Please reference www.leviton.com/renoirII or consult with Customer Service for additional information.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Renoir™ II Wallplates
Renoir™ II Wallplates
PRODUCT DATA
RENOIR II WALLPLATE CONFIGURATION GUIDE
To find applicable Cat. No, locate the row with the number of narrow heat sink devices that you have, and the columns that
correspond to the number of wide heat sink devices you have. In the cell you will find the following information:
• Number indicates the # of “Gangs” required
• The letters under the number indicate the order devices should be installed: N=Narrow; W=Wide
• x*=right fin break-off on device; *x=left fin break-off on device; *x*=fin break-off on both sides of device
• ** indicates that use of jumper bars is required. Jumper bars can be found in the kit with the faceplate
• Replace ‘x’ in the faceplate part number with the desired color: W=White; I=Ivory; T=Light Almond; E=Black; G=Gray
Note: 3-10 gang wallplates are custom and may have a 4-6 week lead time.
FINs Left
ON
CONFIGURATIONS
FINs Left
ON
FINs
Removed
0
FINs Left
ON
FINs Left
ON
FINs
Removed
3
FINs Left ON
FINs
Removed
2
FINs Left
ON
FINs
Removed
4
5
FINs
Removed
Renoir™ II Wallplates
FINs
Removed
1
1
2
3
Backbox - # Gangs
0
1
4
6**
9
Device
Configurations
W
W+W
W+W+W
W+W+W+W
AWP0F-01x
AWP0F-02x
AWP0F-03x
AWP0F-04x
3
5
7
W*+*W
W*+*W*+*W
W*+*W*+*W*+*W
AWP00-02x
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
4
AWP00-03x
AWP00-04x
Backbox - # Gangs
1
3
8**
11
Device
Configurations
N
W+N
W+W+N+W
W+W+N+W+W
AWP0F-10x
AWP0F-11x
AWP0F-13x
AWP0F-14x
7
9
W*+*W+N+W
W*+*W+N+W*+*W
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
AWP00-13x
AWP00-14x
Backbox - # Gangs
1+1
3+1 or 5
5+1** or 7
10
12
Device
Configurations
N+N
W+N+N
W+N+N+W
W+W+N+N+W
W+W+N+N+W+W
AWP0F-20x
AWP0F-21x
AWP0F-22x
AWP0F-23x
AWP0F-24x
2
4
6
8
10
N*+*N
W+N*+*N
W+N*+*N+W
W*+*W+N*+*N+W
W*+*W+N*+*N+W*+*W
AWP00-20x
AWP00-21x
AWP00-22x
AWP00-23x
AWP00-24x
4**
6**
9
11
14
N+N+N
W+N+N+N
W+N+N+N+W
W+W+N+N+N+W
W+W+N+N+N+W+W
AWP0F-30x
AWP0F-31x
AWP0F-32x
AWP0F-33x
AWP0F-34x
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
Backbox - # Gangs
3
5
7
9
11
Device
Configurations
N*+*N*+*N
W+N*+*N*+*N
W+N*+*N*+*N+W
W*+*W+N*+*N*+*N+W
W*+*W+N*+*N*+*N+W*+*W
Wall Plate Part #
AWP00-30x
AWP00-31x
AWP00-32x
AWP00-33x
AWP00-34x
Backbox - # Gangs
4+1**
6+1** or 8
8+1** or 10
13
15
N+N+N+N
W+N+N+N+N
W+N+N+N+N+W
W+W+N+N+N+W
W+W+N+N+N+N+W+W
AWP0F-40x
AWP0F-41x
AWP0F-42x
AWP0F-43x
AWP0F-44x
4
6
8
10
12
N*+*N*+*N*+*N
W+N*+*N*+*N*+*N
W+N*+*N*+*N*+*N+W
W*+*W+N*+*N*+*N*+*N+W
W*+*W+N*+*N*+*N*+*N+W*+*W
AWP00-40x
AWP00-41x
AWP00-42x
AWP00-43x
AWP00-44x
7**
9**
11** or 12
14
17
N+N+N+N+N
W+N+N+N+N+N
W+N+N+N+N+N+W
W+W+N+N+N+N+N+W
W+W+N+N+N+N+N+W+W
AWP0F-50x
AWP0F-51x
AWP0F-52x
AWP0F-53x
AWP0F-54x
5
7
9
11
13
Device
Configurations
N*+*N*+*N*+
*N*+*N
W+N*+*N*+*N*
+*N*+*N
W+N*+*N*+*N*+
*N*+*N+W
W*+*W+N*+*N*+*N*
+*N*+*N+W
W*+*W+N*+*N*+*N*+*N*+
*N+W*+*W
Wall Plate Part #
AWP00-50x
AWP00-51x
AWP00-52x
AWP00-53x
AWP00-54x
Device
Configurations
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
Backbox - # Gangs
Device
Configurations
Wall Plate Part #
Backbox - # Gangs
RENOIR II WALLPLATE DIMENSIONS
LENGTH
HEIGHT
CAT. NO.
LENGTH
8.32” (211.50mm)
AWP0F-01x
4.70” (119.40mm
AWP00-03x
11.95” (303.58mm)
AWP0F-02x
9.23” (234.49mm)
AWP00-04x
15.57” (395.65mm)
AWP0F-03x
13.76” (349.55mm)
AWP00-13x
15.57” (395.65mm)
AWP0F-04x
18.29” (464.61mm)
AWP00-14x
19.20” (487.73mm)
AWP0F-10x
2.89” (73.43mm)
AWP00-20x
4.70” (119.49mm)
AWP0F-11x
7.42” (188.51mm)
AWP00-21x
9.23” (234.55mm)
AWP0F-13x
16.48” (418.64mm)
AWP00-22x
13.76” (349.61mm)
AWP0F-14x
21.01” (533.70mm)
AWP00-23x
17.38” (441.69mm)
AWP0F-20x
5.59” (142.03mm)
AWP00-24x
21.01” (533.76mm)
AWP0F-21x
10.12” (257.09mm)
AWP00-30x
6.51” (165.53mm)
AWP0F-22x
14.65” (372.16mm)
AWP00-31x
11.04” (280.59mm)
AWP0F-23x
19.18” (487011mm)
AWP00-32x
15.57” (395.65mm)
AWP0F-24x
23.71” (602.28mm)
AWP00-33x
19.20” (487.73mm)
AWP0F-30x
8.29” (210.61mm)
AWP00-34x
22.82” (579.80mm)
AWP0F-31x
12.82” (325.67mm)
AWP0F-32x
17.35” (440.74mm)
5.15”
(130.81mm)
AWP00-40x
8.32” (211.56mm)
AWP00-41x
12.85” (326.63mm)
AWP0F-33x
21.88” (555.80mm)
AWP00-42x
17.38” (441.69mm)
AWP0F-34x
26.41” (670.86mm)
AWP00-43x
21.01” (533.76mm)
AWP0F-40x
10.99” (279.19mm)
AWP00-44x
24.63” (625.84mm)
AWP0F-41x
15.52” (394.25mm)
AWP00-50x
10.14 (257.60mm)
AWP0F-42x
20.05” (509.32mm)
AWP00-51x
14.67” (372.66mm)
AWP0F-43x
24.58” (624.38mm)
AWP00-52x
19.20” (487.73mm)
AWP0F-44x
29.11” (739.44mm)
AWP00-53x
22.82” (579.80mm)
AWP0F-50x
13.69” (347.77mm)
AWP00-54x
26.45” (671.88mm)
AWP0F-51x
18.22” (462.83mm)
AWP00-60x
11.95” (303.64mm)
AWP0F-52x
22.75” (577.90mm)
AWP00-61x
16.48” (418.70mm)
AWP0F-53x
27.28” (692.96mm)
AWP00-62x
21.01” (533.76mm)
AWP0F-54x
31.81” (808.02mm)
AWP00-623x
24.63” (625.60mm)
AWP0F-60x
16.39” (416.35mm)
AWP00-64x
28.26” (717.91mm)
AWP0F-61x
20.92” (531.41mm)
AWP0F-62x
25.45” (646.48mm)
AWP0F-63x
29.98” (761.54mm)
AWP0F-64x
34.51” (876.60mm)
HEIGHT
5.15”
(130.81mm)
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Renoir™ II Wallplates
CAT. NO.
AWP00-02x
PRODUCT DATA
RENOIR II WALLPLATE DIMENSIONS
1.32” X2
(33.52mm)
.25”
(6.35mm)
5.15
(130.81mm)
2.63”
(66.80mm)
10.0
Renoir™ II Wallplates
Refer to chart on
previous page for length
Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Portland, OR 97062 Telephone: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8856C/F15-aa
REV JUN 2015