Fiber Optic Adapters
Fumo
Fumo Communications
Communications
LL-AD-DX-SCSC-sm
— Adapter SC-SC, duplex, singlemode —
Adapter: plastic body, ceramic sleeve (ZrO2) for singlemode applications
Standards: Adapters are designed and tested to conform the requirements of IEC, CECC, EIA/TIA & Telcordia (Bellcore)
APPLICATION
SC-SC-adapters are considered to be one of the most common inter-connection devices in fiber optic networking. The most efficient duplex-version allows, for example, 24 connections within the given space of a 1U front plate of a patch panel. – In the present version, the SC-to-SC duplex-adapter for singlemode applications features a plastic compound
body with snap-on- and screwing-devices including two zirconia/ceramic sleeves.
TECHNICAL DRAWING
CONSTRUCTION
FRONT VIEW
1 - ADAPTER BODY
5
2 - CERAMIC SLEEVES
3 - GUIDING DEVICE
1
4 - SNAP-ON DEVICE
3
4
5 - SCREWING DEVICE
2
6
6 - PUSH-PULL DEVICE
metric scale
TECHNICAL SPECIFICATIONS
Type Version Application Material of sleeve Material of body Montage
Connection to inserting connectors Typical attenuation Mating cycles Temperature range
: SC – SC
: duplex, including dust covers (black)
: singlemode
: ZrO2 (zirconia/ceramic)
: plastic compound, blue
: snap-on devices and screwing devices M2 x 6
: push-pull
: < 0,10 dB (dep. on accuracy of inserting connectors)
: 2000 / typical increase after 2000 cycles < 0,05 dB
: operation: -40°C to +85°C / storage: -40°C to +90°C
© Fumo2006. All Rights Reserved. – All values in this data sheet are nominal. Rev. 05/2007
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in
part, without the written consent of Fumo. The information is believed correct at the time of issue. Fumo reserves the right to
amend this specification without notice. Specification is not contractually valid unless specifically authorized by Fumo.
www.fumocom.com
Fumo
Communications
(Italia)