TDJD LED 1x4
DATE
JOB NAME
TYPE
Features
Applications
Applications
• Two outer and one inverted center frosted acrylic
lenses
• Sleek Design
• Clean appearance, no exposed fasteners
Series Size
TDJD LED
LED System
Color Temp
Voltage
Voltage
Mounting
• Hospitals & Clinics
• Medical Offices & Labs
• Office Areas
• Retail Stores
• Class Rooms
Options
1x4
LTG1- Standard
LTG2- Low
LTG3- High
C- Custom Package
(Consult Factory)
3000K
3500K
4000K
5000K
120
277
UNV
Ordering Example: TDJD LED-1X4-LTG3-4000K-UNV-SG-WH
T–Lay-in for Grid
Ceiling*
F–Flange Kit for
Sheetrock
SG - Slot Grid
EM-EM Pack*
DB- Dimming
AR- Air Return
SC-Separate Circuit
WH- Whips
*Standard Tee is
9/16’’. Must
specify if 15/16’’
* Voltage must be
specified with EM
option
LED System Information
Options:
PACKAGE
LTG1
(STANDARD)
LTG2
(LOW)
LTG3
(HIGH)
SYSTEM WATTS
DELIVERED LUMENS
29.5W
3375Lm
27W
3065Lm
33W
Color
Temperature
Pro-rate:
3815Lm
CCT
OUTPUT
3000K
95%
3500K
97%
4000K
100%
5000K
103%
***FOR ANY CUSTOM LED PACKAGE REQUESTS CONSULT FACTORY
Details
Application Features: Premium grade, recessed, high performance direct/
indirect architectural luminaire with two outer and one center frosted acrylic
lenses. For use in indoor applications where a LED luminaire with soft, low-glare
illumination and modern styling is required.
Construction: Die formed and spot welded, 20 ga. cold rolled steel housing
with precision formed, cold rolled steel arched reflector and die formed, cold
rolled steel perforated lamp shield. Shielding flexes over mounting studs on
housing for easy installation and re-lamping. Sufficient knock-outs provided on
back of housing for flexible conduit attachment.
Finish: Powder painted matte white.
August 2014
Electrical: Integral Driver
Approvals: Union made, ETL listed for LED, and manufactured in the US.
Mounting: Recessed mounting for T-Bar, Slot Grid or with Flange Kit for
sheetrock ceiling installations.
Optics:Two outer and one inverted center frosted acrylic lenses
Options: Emergency Battery Backup, Separate Circuit, Air Supply/Return
Slots, 6’ Whips..
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com TDJD LED 1x4
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.
TDJD LED 1x4
Dimensions:
CROSS SECTION VIEW
WITH AIR RETURN
CROSS SECTION VIEW
Lens Installation Instructions:
STEP 1
Detail 1-1:
SQUEEZE LENS TO
SNAP AROUND
EXTRUDED GROOVE
SEE DETAIL 1-1
STEP 2
STEP 3
LIFT AND SHIFT LENS
INTO POSITIONS
September 2014
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com LENS IS HELD IN BY GRAVITY
SITS ABOVE THE LEG OF
EXTRUSION (AS SHOWN)
TDJD LED 1x4
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.