HP
DATE
JOB NAME
TYPE
Features
Applications
Applications
• Clear prismatic acrylic 3-sided lens
• Surface wall or ceiling mounted
• Uses T8, T5 or T5HO lamps
Series Size Lamps Watts Voltage • Stairwells
• Corridors
• Bathrooms
• Utility Rooms
Options
HP
18’’ (T8 only)
2FT (Nominal)
3FT (Nominal)
4FT (Nominal)
1
2
15WT8
17WT8
14WT5
24WT5HO
25WT8
32WT8
28WT5
54WT5HO
120
277
UNV
Ordering Example: HP-132T8-UNV-MS
EM-EM Pack
EM2-EM Pack 2-Lamp
DB-Dimming Ballast
SC-Separate Circuit
MS-Motion Sensor
PC- Polycarbonate Lens
OP-Opal White Acryic Lens
BA-Baffle Blocks Front Light
DI-Divider separates Up/
Down Light
Details
Application Features: Specification grade surface mounted wall or ceiling
luminaire with clear prismatic acrylic 3-sided lens. For use in indoor
applications where a T8, T5 , T5HO or LED luminaire with motion sensor and
separate circuit options for energy savings is required. Available in 18”,
2’, 3’ and 4’ nominal lengths (exact size depends on lamping). Fixtures can be
butt mounted for mounting in continuous rows.
Construction: Die formed 20 ga. pre-painted white steel housing with clear
prismatic acrylic 3-sided lens. Sufficient knock-outs provided for optional
pendant stems. Mouse hole end plate optionally available for through wiring
and motion sensor installation.
Optics: Clear prismatic acrylic 3-sided lens.
Options: Emergency Battery Backup, Dimming Ballast*, Separate Circuit,
Motion Sensor, Opal White Acrylic Lens, Baffle, Divider, Pendant Stems.
*Bi-level luminaire controlled by an integral ultra-sonic motion sensor, designed to
provide safe, dependable illumination while conserving energy. Suitable for cieling or wall mounting. Bi-level fixtures operate at a low standby light level, offering
safety and secuirty with full light output instantly upon occupancy with area fully lit
only as needed. In most municipalities, this is 1 FC average (2 FC in NYC)
Finish: Baked white enamel.
Electrical: Electronic ballasts are class P, thermally protected.
Approvals: Union made, UL listed, and manufactured in the US.
Mounting: Surface or wall mounts over electrical junction box or with optional
pendant stems.
October 2014
Image shows fixture
with motion sensor
and emergency pack
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com HP
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE. ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS
PROPERTY OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.
HP
3"
4-3/8"
4-1/2"
4-1/2"
END
VIEW
WITH OPTIONAL
DIVIDER
7/32" K.O.(TYP OF 2)
7/8" K.O.(TYPE OF 3)
LENS
ONLY
3/16" x1/2" K.O.
3/16"x1/2" K.O.
3/16" GROUND K.O.
3/16" K.O.
FRONT VIEW WITHOUT LENS
SIDE VIEW WITH LENS
October 2014
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com HP
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE. ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS
PROPERTY OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.