TDSW
DATE
JOB NAME
TYPE
Applications
Applications
Features
• Dual perforated metal lamp shields
• Translucent opal white acrylic overlay and perforated metal shields
• Clean appearance, no exposed fasteners
Series
Size
Lamps
Watts Voltage
Mounting
Voltage
• Office Areas
• Class Rooms
• Retail Stores
• Hospitals
Options
TDSW
1X4
2X2
2X4
2
4
17WT8
14WT5
24WT5HO
40WBX
50WBX
55WBX
32WT8
28WT5
54WT5HO
120
277
UNV
T–Lay-in for Grid
Ceiling*
F–Flange Kit for
Sheetrock
SG - Slot Grid
EM-EM Pack
EM2-EM Pack 2-Lamp
DB-Dimming Ballast
WH–6’ Whips
*Standard Tee is
9/16’’. Must
specify if 15/16’’
Ordering Example:TDSW-2X2-2-24T5HO-T-UNV-WH
Details
Application Features: Premium grade, recessed, high performance direct/
indirect architectural luminaire with dual perforated metal lamp shields. For use
in indoor applications where a T8, T5, T5HO or Biax luminaire with soft,
low-glare illumination and modern styling is required. Available in 1x4, 2x2 and
2x4 configurations.
Construction: Die formed and spot welded, 20 ga. cold rolled steel housing
with precision formed, cold rolled steel arched reflector and die formed,
perforated cold rolled steel perforated lamp shields. Shielding flexes over
mounting studs on housing for easy installation and re-lamping. Sufficient
knock-outs provided on back of housing for flexible conduit attachment.
Electrical: Electronic ballasts are class P, thermally protected.
Approvals: Union made, UL listed, and manufactured iin the US.
Mounting: Recessed mounting for T-Bar, Slot Grid or with Flange Kit for
sheetrock ceiling installations.
Optics: Arched reflector and perforated lamp shields with opal white acrylic
overlays.
Options: Emergency Battery Backup, Dimming Ballast, 6’ Whips.
Finish: Powder painted matte white.
October 2014
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com TDSW
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.
TDSW
Model
Nominal Length
B
1x4
2x2
2x4
48’’
24’’
48’’
47 3/4’’
23 3/4’’
47 3/4’’
1/4" REVEAL
DETAIL
23-3/4"
5-1/2"
23-3/4"
A
CROSS SECTION
2-LAMP BIAX
5-7/16"
TOPVIEW
HOLES PROVIDED FOR
CHAIN MOUNTING
5-1/2"
ACCESS PLATE
23-3/4"
CROSS SECTION
2-LAMP T5
October 2014
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com TDSW
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.