SOLLATEK DATA SHEET NO: 10910162
t thheepo
r ttoo pprr ootteect
p owe
w er
ct
VOLTAGE
PROTECTION
VOLTSAFE
DSP1P-D25
Voltsafe™
www. s o llat e k . c o m
DSP1P-D25 240V TNS T1+T2
Class I + II Distribution Surge/Lightning Protection
Description
Highly efficient varistor lightning current arrester
to be installed in low-voltage distributions at the
boundary of LPZ 0A–LPZ 1 zones and higher, to prevent
overvoltage effects induced during direct or indirect
lightning strikes.
It is particularly suitable for residential houses and
small buildings with a low-voltage cable terminal or
for secondary switchboards in large building.
Applications
• Class I & II combined protection for all sensitive
electronic devices
RFI / Noise
High Voltage Spikes/Surges
Low Voltage
Spikes/Surges
AdvancedRFI
AdvancedPower-Back
Basic Spikes/Surges
Basic PowerLow
RFI / Noise
CutsVoltage
Surges
Power Cuts
High Voltage
Low/ Noise
Voltage Expert
BasicExpertTelecom Advanced
High Voltage
Lightning
Lightning Surges
LightningLightning
Lightning
Lightning
Lightning
Lightning
Pow
Expe
S
Lightn
Features
• Combined class I & II
• Compact DIN rail mount for easy install in the field
• Visual fault signalling
• Optional remote status signalling (S)
DSP1P-D25 (DIN rail mount, plastic casing)
• Visual Indication of fault
Spikes/Surges
• Volt-free contacts
for remote indication
RFI / Noise
• 5 year no-quibble warranty
High Voltage Spikes/Surges
Low Voltage
AdvancedRFI
AdvancedPower-Back
RFI / NoiseBasic Spikes/Surges
Basic
PowerLow
Cuts
Surges
Power Cuts
High Voltage
Low/ Noise
Voltage Expert
BasicExpertTelecom Advanced
High Voltage
Voltage
Lightning
LightningLightning
Lightning Surges
Lightning
Lightning
Lightning
Lightning
Protection against
10/350μs
8/20μs
Class I
Lightning
Class II
Surge/Spike
Features
25
kA
PROTECTION
COMBINED
CLASS
I&II
DIN
RAIL MOUNT
5
YEARS
WARRANTY
Po
Exp
Light
It is particularly
for residential
and houses
small and small
It is suitable
particularly
suitable forhouses
residential
buildings with
buildings with
a low-voltage
cable terminal
or for
secondary
a low-voltage
cable
terminal
or forswitchboards
secondary switchboards
in large building.
in large building.
•
•
Visual fault
• signalling
Visual fault signalling
Optional
remote
status
signalling
•
Optional
remote
status(S).
signalling (S).
FLP-25-350/2
DSP1P-D25
Dimension drawing
FLP-25-350/2(S)
Dimension drawing
Dimension drawing
DSP1P-D25
Basic circuit diagram
Basic circuit diagram
Basic circuit diagram
15
15
L
N L
N
9
9
SPD type 1 – combined arrester type 1 and 2
•
•
90
45
90
45
Highly efficient varistor lightning current arrester to be
installed in low-voltage distributions at the boundary of
LPZ 0A–LPZ 1 zones and higher, to prevent overvoltage
effects induced during direct or indirect lightning strikes.
It is particularly suitable for residential houses and small
buildings with
a low-voltage cable terminal or for secondary switchboards
in large building.
Visual fault signalling
Optional remote status signalling
(S).
57
57
connection of connection of
signalization terminal
signalization term
72
PE
Dimension drawing
PE
Basic circuit diagram
Technical data
Technical data
90
45
9
FLP-25-350/2(S)
FLP-25-350/2(S)
15
N
L
DSP1P-D25
Nominal voltage
(Power
Supply
System)
U
230
V AC/400 V230
AC V AC/400 V AC
Nominal voltage (Power Supply System) n
Un
Connection of signal terminal
Specifications DSP1P-D25
260 V AC
Maximum operating
voltage
Uc
260 V AC
Maximum
operating voltage
Uc
400
V AC/5 s 400 V AC/5 s
Temporary
overvoltage
(TOV)
U
Temporary
overvoltage
(TOV)
U
T
Nominal voltage (Power Supply System) Un 230 V AC
T
30 kA
Nominalvoltage
discharge
(8/20 μs)
30 kA
Nominal
discharge
current
μs) In
Maximum operating
current
Uc(8/20
260 VInAC
25 kA
Lightning impulse
(10/350current
μs) U(10/350
Iimp
25 kA
Lightning
μs)
I
Temporary overvoltage
(TOV)
currentimpulse
400
V
AC/5
s
imp
T
60 kA
Maximum
discharge
current
(8/20
μs)
60 kA
Maximum
discharge
current
Imax
Nominal discharge
current
(8/20
μs)/pole
In (8/20 μs) Imax
30 kA
1,5 kV
Voltage protection
level
Up
1,5 kV
protection
Up
Maximum discharge
currentVoltage
(8/20
μs)/pole
level Imax 60 kA
100 ns
Response
time
ta
100 ns
Response
time ta
Lighting impulse
current
(10/350
μs)/pole
Iimp 25 kA
Ability
to
independently
switch
off
the
following
current
I
no
following
current
current 1.5 IkV
no following current
fi
Voltage protection level Ability to independently switch
Up off
the following
fi
Short-circuit
proof
at maximum
overcurrent
protection
35 kArms
Short-circuit
proof
at maximum
35 kArms
Response time
ta overcurrent protection 100 ns
connection of
Maximum overcurrent
160 A gL/gG 160 A gL/gG
Maximum
overcurrent protection
Ability to independently
switch
off protection
signalization terminal
the followingDegree
currentof protection
Ifi no follow through currentIP 20
Degree of protection
IP 20
57
Rangeatofmaximum
operating
temperatures
- 40 °C … + 80 -°C
Short-circuit proof
overcurrent
Range
of operating temperatures
40 °C … + 80 °C
protection 35 kArms DIN rail 35 mm PE
Mounting on Mounting on
DIN rail 35 mm
Maximum overcurrent
protection
160
A gL/gG
Cross-section of
connected conductors
Cross-section
of connected conductors
Degree of IP protection
IP 20ISO: 1/50 mm2 ; AWG: 17/1 2
Solid min/max
Solid min/max
ISO: 1/50 mm ; AWG: 17/1
Range of operating
temperatures
40
°C
to +ISO:
80 1/35
°C mm2 ; AWG: 17/2 2
Stranded min/max
ISO: 1/35 mm ; AWG: 17/2
Technical dataStranded min/max
FLP-25-350/2(S)
Mounting onStripping
DIN rail 35 mm
length
of the supply
14 mm
Stripping
lengthconductor
of the supply conductor
14 mm
Nominal
voltage (Power
Supply
System)
U
230
V
AC/400
V AC max. 4 Nm
Cross-section
of
connected
conductors
n
Tightening torque
Tightening
torque
max.
4 Nm
Solid
min/maxvoltage
ISO: 1/50
17/1
260mm2
V AC ; AWG:
Maximum
operating
Uc
Fault indication
red17/2
indication field
Fault indication
red indication field
Stranded min/max
ISO: 1/35 mm2 ; AWG:
400 V AC/5
s
Temporary overvoltage
(TOV)
U
Remote
indication
– S design
potential-free
change-over
Remote
indication
– S Tdesign
potential-freecontact
change-over contact
Stripping length
of the
supply
conductors
14
mm
30 kA250 V / 0,5 A AC, 250 V / 0,1 A DC
Nominal dischargeRemote
currentindication
(8/20 μs) contacts
In
Tightening torque max. 4 Nm
Remote indication contacts
250 V / 0,5 A AC, 250 V / 0,1 A DC
25 kA
Lightning impulseCross-section
current (10/350
μs)
Iimp
2
of
remote
indication
conductors
Fault indication Cross-section
of remote
indication conductorsred indication max. 1,5 mm max. 1,5 mm2
60
kA
Maximum discharge
current
(8/20
μs)
I
Meets–the
requirements
standard max of standard volt-free change-over
EN 61643-11
A1161643-11 + A11
Remote indication
S design
contact +EN
Meets
theof
requirements
1,5 kV
Voltage protection level
Up
Remote indication contacts 250 V / 0.5 A AC, 250 V / 0.1 A DC
www.saltek.eu
For more information on the
www.s
100 ns
Response time Sales office & technical
ta
support:
Sales office
& technical support:
Cross-section
of remote
indication
conductors
max.
1.5
mm2
SALTEK
TRADE
s.r.o.,
Arkalycká
833/1,
149
00
Praha
4,
Czech
Republic,
tel.:
+420
272
942
470,
fax:
+420
267
913
411,
GSM:
+420
602
472
633,
e-mail:
sales@saltek.cz
Sollatek's
Voltage
Suppressor
SALTEK
TRADE
s.r.o.,
Arkalycká
833/1,
149
00
Praha
4,
Czech
Republic,
tel.:
+420
272
942
470,
fax:
+420
267
913
411,
GSM:
+420
602
472
633, e-mail: sales@salt
Ability to independently switch off the following current
Ifi
no following current
Meets the requirements of standard EN 61643-11 + A11
Range refer to the Voltage
Short-circuit proof20100510
at maximum overcurrent
35 kArms
20100510 protection
protection catalogue or visit
Maximum overcurrent protection
160 A gL/gG
www.sollatek.com
Degree of protection
IP 20
Range of operating temperatures
- 40 °C … + 80 °C
Mounting
on
DIN rail 35 mm
ITEM
PRODUCT CODE
Cross-section
DSP1P-D25 240V
T1(25)+T2(30)
9M109025
of connected
conductors
Solid min/max
ISO: 1/50 mm2 ; AWG: 17/1
Stranded min/max
ISO: 1/35 mm2 ; AWG: 17/2
t thheepo
r ttoo pro
Stripping length of the supply conductor
14 mm
p owe
w er
pr otteect
ct
Tightening torque
max. 4 Nm
Fault indication
red indication field
Remote indication – S design
potential-free change-over contact
Remote indication contacts
250 V / 0,5 A AC, 250 V / 0,1 A DC
(UK) Ltd. Sollatek House, Waterside Drive,
Cross-section of remote indicationSollatek
conductors
max.Langley,
1,5 mm2Slough, SL3 6EZ United Kingdom
Tel: 1753 214 500 Technical support: support@sollatek.com Sales: sales@sollatek.com www.sollatek.com
Meets the requirements of standard
EN 61643-11 + A11
www. s o llat e k . co m
©Sollatek (UK) Limited 2010. All Rights Reserved. SOLLATEK and the SOLLATEK device are the trade marks of the Sollatek group of companies.
Sales office & technical support:
www.saltek.eu