VersaLux
TM
A R C H I T E CT U R A L L I G H T I N G S E R I E S
Fluorescent/
Job Name:
Point Source
Video Conference
Fixture Type:
T5
Fluorescent Video Conference, MR16 Splay Aperture Uni-Directional
VCS1-____M6_____-_____T____ ____-____-____-W-____
# of MR16
MR16 Wattage
Lamps
# of
MR16
MR16
Wattage
# of Fluor Lamps
in Cross Section
# of Fluor in
Cross Section
Fluor
Wattage
Fluor Lamp
Ballast
Length
Wattage
Ballast
Trim
Options*
Length
Trim
Options*
(Specify below)
2
20
1See
E (Electronic) Std.
36"
Configurations
†
3
37
2
D (Dimming) 48"
(Pages 2-3)
50
60"
† Specify Ballast (required)
Voltage
72"
84"
96"
Voltage
P (Plaster)
F (Flange)
X (Flangeless)
1 (120V)
2 (277V)
Custom
(specify)
*P=Plaster: For use with Drywall and Fellert.
F=Flange: Suitable for all ceiling types.
X=Flangeless: For use with Donn Fineline 9/16, Armstrong Bolt Slot 9/16, TechZone 9/16 Superfine, TechZone 15/16 Prelude, TechZone 9/16 Interlude, Decoustic and Wood.
Electrical
-Power Consumption: Per specification
-Ambient temperature 100 °F. maximum
-Integral electronic ballast(s), thermally
protected and toroidal transformer(s)
-Through branch wiring capable
OR
LL
W
-Accessories/Lenses: Specify on Page 4
-Occupancy sensor, daylight control module and EM pack
-Nippo, Feelux, or Lumilux Seamless
lamping
-Downlight: Metal halide or
LED modules
KERS UN I ON
Options (Consult factory)
CE
-Standard Lenses: MR16-Solite,
Fluorescent-Frosted acrylic
-Shiplapped lenses for sections longer than 96"
-Fixtures fabricated to any length (Refer to
Pages 2-3)
-Continuous run length configurations with
fully illuminated corners
-Below ceiling access to ballast and wiring
Finish: White (std), custom available
Weight: Approx. 6 lbs. per linear foot
Ceiling Cutout: Refer to Pages 2-3
S
P L AY & M I
Features
Fixture Specifications
DIS
Fluorescent video conference fixture with MR16
splay aperture. Asymmetric aspect.
AN
RI
A
L
Description
EOU
S INDUST
Photometry: Consult factory
Mounting
-Threaded rod, hanger wire or alternate
mounting by others, consult factory
All designs and scaled drawings shall remain the property of STARFIRE LIGHTING, INC., and may not be reproduced or transmitted without expressed written consent. STARFIRE
LIGHTING, INC. reserves the right to make changes on approved designs to facilitate manufacturing methods to the extent that such changes do not compromise design integrity.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 1
T5
Single Lamp Configurations
VCS1
Job Name:
1 - Choose fixture configuration
2 - Select desired fluorescent lamp wattage
Fixture Type:
For fixture installation dimensions per trim type,
follow formula below
For single MR16 downlight configurations, consult factory.
Custom configurations upon request.
(1) 14W
36"
(1) 24 (HO)
35.375" OAL
(Trim/Housing)
(1) 21W
48"
(1) 39 (HO)
47.375" OAL (Trim/Housing)
Plaster
Furthest extent of tape-in flange
Length: OAL + 1.75", Width: 7.125"
Ceiling cut out
Length: OAL + 0.125", Width: 5.5"
Flange
Furthest extent of overlap flange
Length: OAL + 1", Width: 6.375"
Ceiling cut out
Length: OAL + 0.125", Width: 5.5"
Flangeless
Opening for Wood/Tile/Decoustic ceilings
Length: OAL + 0.125", Width: 5.5"
CTC Grid spacing for T-Grid/ATC systems
Length: OAL + 0.625", Width: 6"
Example: Flangeless 48" (Nom) VCS1 in Decoustic ceiling
Length: 47.375" + 0.125" = 47.5" x 5.5" Wide
(1) 28W
60"
(1) 54 (HO)
59.375" OAL (Trim/Housing)
(2) 21W
72"
(2) 39 (HO)
71.375" OAL (Trim/Housing)
(2) 14W
72"
(2) 24 (HO)
(1) 21W & (1) 28W
84"
(1) 39 (HO) & (1) 54 (HO)
83.375" OAL (Trim/Housing)
(2) 21W
84"
(2) 39 (HO)
(2) 28W
96"
(2) 54 (HO)
95.375" OAL (Trim/Housing)
(2) 21W
96"
(2) 39 (HO)
Starfire's patent pending EvenGlow™ system eliminates lamp/socket imaging and bright spots.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0515
Page 2
Double Lamp Configurations
VCS1
1 - Choose fixture configuration
2 - Select desired fluorescent lamp wattage
T5
Job Name:
Fixture Type:
For fixture installation dimensions per trim type,
follow formula below
For single MR16 downlight configurations, consult factory.
Custom configurations upon request.
(2) 14W
36"
(2) 24 (HO)
35.375" OAL
(Trim/Housing)
(2) 21W
48"
(2) 39 (HO)
47.375" OAL (Trim/Housing)
Plaster
Furthest extent of tape-in flange
Length: OAL + 1.75", Width: 7.125"
Ceiling cut out
Length: OAL + 0.125", Width: 5.5"
Flange
Furthest extent of overlap flange
Length: OAL + 1", Width: 6.375"
Ceiling cut out
Length: OAL + 0.125", Width: 5.5"
Flangeless
Opening for Wood/Tile/Decoustic ceilings
Length: OAL + 0.125", Width: 5.5"
CTC Grid spacing for T-Grid/ATC systems
Length: OAL + 0.625", Width: 6"
Example: Flangeless 48" (Nom) VCS1 in Decoustic ceiling
Length: 47.375" + 0.125" = 47.5" x 5.5" Wide
(2) 28W
60"
(2) 54 (HO)
59.375" OAL (Trim/Housing)
(4) 21W
72"
(4) 39 (HO)
71.375" OAL (Trim/Housing)
(4) 14W
72"
(4) 24 (HO)
(2) 21W & (2) 28W
72"
(2) 39 (HO) & (2) 54 (HO)
83.375" OAL (Trim/Housing)
(4) 21W
84"
(4) 39 (HO)
(4) 28W
96"
(4) 54 (HO)
95.375" OAL (Trim/Housing)
(4) 21W
96"
(4) 39 (HO)
Starfire's patent pending EvenGlow™ system eliminates lamp/socket imaging and bright spots.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0515
Page 3
T5
Fluorescent Video Conference MR16 Splay Aperture Uni-Directional
Job Name:
Fixture Type:
VCS1
Fluorescent Options
Acrylic Lenses
Frosted
(2067-P95)
Point Source Options
Lens
Efficiency
Cat. No.
Glass Lenses
MR16
Cat. No.
Solite
Spread Lens
(standard)
47P
Frosted Solite
Spread Lens
FS
DH
Prismatic
Spread Lens
PR
Frosted Prismatic
Spread Lens
FP
81%
(standard)
2447-P95
47%
D-Glare, Hi-Def
93%
For other lens options, consult factory.
For other lens options, consult factory.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 4