VersaLux
TM
A R C H I T E CT U R A L L I G H T I N G S E R I E S
Fluorescent/
Point Source
Slot
Job Name:
Fixture Type:
T5
Fluorescent Slot, Regressed Lens with MR16 LED Open Aperture
6.2500" -T5
(6.3750" -T8)
6.2500" -T5
(6.3750" -T8)
Acrylic Lens
Regressed 1.25"
MR16 LED Compartment
Ceiling /Trim Options
Plaster
Flange
Drywall
Fellert
Flange
(All Ceilings)
Flangeless
Donn Fineline
Armstrong Bolt
TechZone 9/16
Superfine
TechZone 15/16
Prelude
TechZone 9/16
Interlude
Decoustic
Wood
VAR6-____L6_____-_____T____ ____-____-____-W-____
# of
MR16
# of MR16
LED Wattage
Lamps
LED
Wattage
# of Fluor Lamps
in Cross Section
# of Fluor in
Cross Section
Fluor
Wattage
Fluor Lamp
Ballast
Length
Wattage
Ballast
Trim
Options*
Length
Trim
Options*
(Specify below)
Consult factory
1
1See
E (Electronic) Std.
36"
for Lamp to
Configurations
†
2
2
D (Dimming) 48"
Transformer/Driver
(Pages 2-3)
compatability
3
60"
† Specify Ballast (required)
72"
84"
96"
Voltage
Voltage
P (Plaster)
F (Flange)
X (Flangeless)
1 (120V)
2 (277V)
Custom
(specify)
*P=Plaster: For use with Drywall and Fellert.
F=Flange: Suitable for all ceiling types.
X=Flangeless: For use with Donn Fineline 9/16, Armstrong Bolt Slot 9/16, TechZone 9/16 Superfine, TechZone 15/16 Prelude, TechZone 9/16 Interlude, Decoustic and Wood.
-Ambient temperature 100 °F. maximum
-Integral electronic ballast(s), thermally
protected and toroidal transformer(s)
-Through branch wiring capable
KERS UN I ON
OR
LL
CE
Electrical
S
P L AY & M I
-Standard Lens: Frosted acrylic
-Shiplapped lenses for sections longer than 96"
-Fixtures fabricated to any length (Refer to
Pages 2-3)
-Continuous run length configurations with fully
illuminated corners
-Below ceiling access to ballast, transformer
and wiring
-Lenses: Specify on Page 4
-Occupancy sensor, daylight control module and EM pack
-HVAC, fire sprinkler, surveillance or
public address systems integration
-Nippo, Feelux, or Lumilux Seamless
lamping
DIS
Features
Options (Consult factory)
W
Fixture Specifications
Fluorescent slot with regressed lens and MR16 LED Finish: White (std), custom available
open aperture.
Weight: Approx. 8 lbs. per linear foot
Ceiling Cutout: Refer to Pages 2-3
AN
RI
A
L
Description
EOU
S INDUST
Photometry: Consult factory
Mounting
-Threaded rod, hanger wire or alternate
mounting by others, consult factory
All designs and scaled drawings shall remain the property of STARFIRE LIGHTING, INC., and may not be reproduced or transmitted without expressed written consent. STARFIRE
LIGHTING, INC. reserves the right to make changes on approved designs to facilitate manufacturing methods to the extent that such changes do not compromise design integrity.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 1
T5
Single Lamp Configurations
VAR6
Job Name:
1 - Choose fixture configuration
2 - Select desired fluorescent lamp wattage
Fixture Type:
For fixture installation dimensions per trim type,
follow formula below
For single MR16 downlight configurations, consult factory.
Custom configurations upon request.
(1) 14W
36"
(1) 24 (HO)
35.625" OAL
(Trim/Housing)
(1) 21W
48"
(1) 39 (HO)
47.625" OAL (Trim/Housing)
Plaster
Furthest extent of tape-in flange
Length: OAL + 1.5", Width: 7.125"
Ceiling cut out
Length: OAL + 0.125", Width: 5.75"
Flange
Furthest extent of overlap flange
Length: OAL + 0.625", Width: 5.25"
Ceiling cut out
Length: OAL + 0.125", Width: 5.75"
Flangeless
Opening for Wood/Tile/Decoustic ceilings
Length: OAL + 0.125", Width: 5.75"
CTC Grid spacing for T-Grid/ATC systems
Length: OAL + 0.375", Width: 6"
Example: Flangeless 48" (Nom) VAR6 in Decoustic ceiling
Length: 47.625" + 0.125" = 47.75" x 5.75" Wide
(1) 28W
60"
(1) 54 (HO)
59.625" OAL (Trim/Housing)
(2) 21W
72"
(2) 39 (HO)
71.625" OAL (Trim/Housing)
(2) 14W
72"
(2) 24 (HO)
(1) 21W & (1) 28W
84"
(1) 39 (HO) & (1) 54 (HO)
83.625" OAL (Trim/Housing)
(2) 21W
84"
(2) 39 (HO)
(2) 28W
96"
(2) 54 (HO)
95.625" OAL (Trim/Housing)
(2) 21W
96"
(2) 39 (HO)
Starfire's patent pending EvenGlow™ system eliminates lamp/socket imaging and bright spots.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 2
Double Lamp Configurations
VAR6
1 - Choose fixture configuration
2 - Select desired fluorescent lamp wattage
T5
Job Name:
Fixture Type:
For fixture installation dimensions per trim type,
follow formula below
For single MR16 downlight configurations, consult factory.
Custom configurations upon request.
(2) 14W
36"
(2) 24 (HO)
35.625" OAL
(Trim/Housing)
(2) 21W
48"
(2) 39 (HO)
47.625" OAL (Trim/Housing)
Plaster
Furthest extent of tape-in flange
Length: OAL + 1.5", Width: 7.125"
Ceiling cut out
Length: OAL + 0.125", Width: 5.75"
Flange
Furthest extent of overlap flange
Length: OAL + 0.625", Width: 5.25"
Ceiling cut out
Length: OAL + 0.125", Width: 5.75"
Flangeless
Opening for Wood/Tile/Decoustic ceilings
Length: OAL + 0.125", Width: 5.75"
CTC Grid spacing for T-Grid/ATC systems
Length: OAL + 0.375", Width: 6"
Example: Flangeless 48" (Nom) VAR6 in Decoustic ceiling
Length: 47.625" + 0.125" = 47.75" x 5.75" Wide
(2) 28W
60"
(2) 54 (HO)
59.625" OAL (Trim/Housing)
(4) 21W
72"
(4) 39 (HO)
71.625" OAL (Trim/Housing)
(4) 14W
72"
(4) 24 (HO)
(2) 21W & (2) 28W
84"
(2) 39 (HO) & (2) 54 (HO)
83.625" OAL (Trim/Housing)
(4) 21W
84"
(4) 39 (HO)
(4) 28W
96"
(4) 54 (HO)
95.625" OAL (Trim/Housing)
(4) 21W
96"
(4) 39 (HO)
Starfire's patent pending EvenGlow™ system eliminates lamp/socket imaging and bright spots.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 3
T5
Fluorescent Slot, Regressed Lens with MR16 LED Open Aperture
Job Name:
Fixture Type:
VAR6
Fluorescent Options
Acrylic Lenses
Frosted
(2067-P95)
Lens
Efficiency
Cat. No.
81%
(standard)
2447-P95
47%
47P
D-Glare, Hi-Def
93%
DH
For other lens options, consult factory.
Starfire Lighting, Inc.
7 Donna Drive, Wood-Ridge, NJ 07075 P: 201.438.9540 F: 201.438.9541 www.starfirelighting.com
Rev.0415
Page 4