Commercial Line COMMERCIAL HEAVY DUTY GAS WATER HEATERS – DIRECT SPARK IGNITION 12 Models Available in 75, 80 & 100 Gallons Capacity, Ranging from 125,000 BTU – 512,000 BTU input. Features The American Standard Commercial Heavy Duty Gas Model water heaters are designed to economically deliver large quantities of hot water through the utilization of the most energy–saving techniques. Customary applications include car washes, hospitals, hotels, industrial buildings, Laundromats, motels, multi-family developments, schools, and restaurants. Heavy Gauge Steel Tank – incorporating only three internal flue tubes resulting in fewer critical welds to yield added years of trouble–free service. Inner Tank Glass–lined – with Dura–Glas™ and fired at 1600° F for optimum protection from the effects of corrosion. R- 8.3 Non-CFC Foam – insulated to save energy & reduce fuel costs by maximizing heat retention. Four Anode Rods – to ensure maximum tank life. Full Sized Hand–hole Cleanout – for easy tank inspection and/or removal of sediment deposits. Electronic Direct–Spark Ignition System – saves fuel by eliminating the need for a standby gas pilot. Automatic Motorized Flue Damper – reduces tank heat loss during standby periods for lowest operating costs. Fully Adjustable 24–Volt Controls – provide temperature settings to 180° F. When installed with a mixing valve, these Heavy Duty Commercial Gas water heaters can deliver 180° F sanitizing and 140° F general purpose hot water simultaneously. Factory Installed Energy Cut-off System & Pressure/Temperature Relief Valve. Top, Rear & Front Water Connections – for universal replacements, connection to circulating lines and eased multiple heater or storage tank installations. CSA certified to meet NSF/ANSI 5 Standards. AMERICAN STANDARD Gas Water Heaters – are certified at 300 PSI test pressure & for 150 PSI working pressure. All tanks are hydrostatically tested at the factory. Certified with CSA International – in accordance with ANSI Z21.10.3 - CSA 4.3 for up to 180° F operation as an automatic storage and/or automatic circulating tank heater & meets ASHRAE 90.1-1999. Three Year Limited Warranty – on inner glass–lined tank & one year limited warranty on all other component parts. THIS WATER HEATER MEETS THE REQUIREMENTS OF ASHRAE 90.1-1999 AND MEETS OR EXCEEDS THE THERMAL EFFICIENCY AND STANDBY LOSS REQUIREMENTS OF CALIFORNIA AND OTHER STATES RECOGNIZING ASHRAE. 561 New York Drive, Pomona, California 91768 (800) 900-9063 * (909) 392-0230 * FAX (909) 392-7302 CG 002A 7/08 www.americanstandardwaterheaters.com SPECIFCATIONS AND APPLICATION DATA WATER I.P.S. GAS I.P.S CONN. CONNECTIONS (TOP REAR & FRONT) V E N T Exterior Dimensions BTU TANK INPUT GALLONS NAT GAS CAPACITY L./P. MODEL NUMBER D-80-125-AS D-80-165-AS D-80-180-AS D-80-199-AS D-100-199-AS D-100-T-199-AS D-100-250-AS / D-100-250-ASME D-100-270-AS / D-100-270-ASME D-100-300-AS / D-100-300-ASME D-75-365-AS / D-75-365-ASME D-75-399-AS / D-75-399-ASME D-80-512-AS / D-80-512-ASME 80 80 80 80 100 100 100 100 100 75 75 80 125,000 165,000 180,000 199,900 199,900 199,900 250,000 270,000 300,000 365,000 399,900 512,000 REH GPH THERM 100 EFF% RISE 121 160 175 194 194 194 242 262 291 358 393 496 80% 80% 80% 80% 80% 80% 80% 80% 80% 81% 81% 80% A B C 73 1/4 75 1/4 751/4 68 1/4 73 5/8 78 1/4 73 5/8 73 5/8 73 5/8 75 3/4 75 3/4 72 1/4 26 1/4 26 1/4 26 1/4 28 1/4 30 1/4 28 1/4 30 1/4 30 1/4 30 1/4 30 1/4 30 1/4 30 1/4 67 1/4 67 1/2 67 1/2 60 1/2 65 5/8 70 1/2 65 5/8 65 5/8 65 5/8 66 1/4 66 1/4 66 1/4 TOP PIPE SIZE 5 6 6 6 6 6 6 6 7 8 8 10 REAR & FRONT WATER CONN. 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 2 2 2 2 2 2 2 2 2 2 2 HGT. TO TOP WATER HGT. HGT. TOP TO REAR TO REAR & WATER & FRONT FRONT SPREAD HOT COLD H G T S I Z E HGT TO T&P O P E N I N G D E F G H I J 70 70 70 63 5/8 67 5/8 73 5/8 67 5/8 67 5/8 67 5/8 67 5/8 67 5/8 67 5/8 19 5/8 19 5/8 19 5/8 21 1/4 23 5/8 21 1/4 23 5/8 23 5/8 23 5/8 23 5/8 23 5/8 23 5/8 55 1/4 55 1/4 55 1/4 52 57 1/2 62 57 1/2 57 1/2 57 1/2 57 57 57 22 3/4 22 3/4 22 3/4 18 3/4 20 18 3/4 20 20 20 19 1/4 19 1/4 19 1/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 57 1/8 57 1/8 57 1/8 53 5/8 58 7/8 63 5/8 58 7/8 58 7/8 58 7/8 58 1/4 58 1/4 58 1/4 T&P O P E N I N G * FOR PROPANE (LP) GAS MODEL ADD SUFFIX “LP”, FOR SCAQMD LOW NOx MODEL ADD PREFIX “N” MAXIMUM HOT WATER DELIVERABLITY AT VARIOUS TIME PERIODS MODEL D-80-125-AS D-80-165-AS D-80-180-AS D-80-199-AS D-100-199-AS D-100-T-199-AS D-100-250-AS / D-100-250-ASME D-100-270-AS / D-100-270-ASME D-100-300-AS / D-100-300-ASME D-75-365-AS / D-75-365-ASME D-75-399-AS / D-75-399-ASME D-80-512-AS / D-80-512-ASME GPM REC. 100° RISE STORAGE CAPACITY U.S. GALLONS ONE HOUR RECOVERY 100° RISE 1ST HOUR 80 121 177 298 419 80 160 216 376 536 2.7 80 175 231 406 581 2.9 80 194 250 444 638 3.2 100 194 264 458 652 3.2 100 194 264 458 652 3.2 100 242 312 554 796 4 100 262 332 594 856 4.4 100 291 361 652 943 4.9 75 358 411 769 1,179 5.9 75 393 446 839 1,232 6.6 80 496 552 1,048 1,544 8.3 2 HOURS 3 HOURS 2 ELECTRICAL REQUIREMENTS Note: Recovery rate indicated on heater rating plate is based on 75% (76%) thermal efficiency according to CSA (ANSI, Z.21.10.3). Manufacturer reserves the right to make product changes and/or improvements with or without notice. SAMPLE SPECIFICATION Commercial gas water heater shall be AMERICAN STANDARD model _____________ having a storage capacity of ________ gallons, operate on _____________ Gas, with a BTU input of_________________ and a recovery rate of ________ gallons per hour at 100°F temperature rise. Water heater tank interior shall be glass lined with Dura-Glas™, furnished with four anode rods and insulation shall be non-CFC foam of R-8.3. Water heater shall be CSA certified. 561 New York Drive, Pomona, California 91768 (800) 900-9063 * (909) 392-0230 * FAX (909) 392-7302 www.americanstandardwaterheaters.com 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1