Appliance plug connectors – VARIOCON
Contact carriers for turned and rolled crimp contacts
Notes:
For crimp contacts, refer to page 528.
For crimping tool, refer to page 534.
15, 30, 50 and 65 poles are available, in accordance with housing sizes 1-4. Male and female contacts can be used on both the connector and device sides.
The contact carriers additionally have two pre-mating protective ground contacts. The connection data is 250 V / 10 A and is equivalent to that of the HEAVYCON D series. Both turned and rolled contacts can be used in the contact carriers. The type of contacts used fulfill the requirements of
IEC 60352/ DIN EN 60352.
Safety note:
The PE conductor must always be connected to the directly opposite positions.
Connectors may only be operated when under no-load conditions.
Description Design
Number of positions
Incl. PE
Female contact carrier, with four ST 2,9 fastening screws
VC1
VC2
VC3
VC4
15
30
50
65
Mounting flange, to screw the contact insert to the housing panel
Type
VC-D1-ST15-PE
VC-D2-ST30-PE
VC-D3-ST50-PE
VC-D4-ST65-PE
VC-D-AF
Coding pins, with ST2,9 thread for sleeve housings, to prevent identical plug connectors from being confused
VC-CB-T
Coding pins, with M3 thread for VC panel mounting bases, to prevent identical plug connectors from being confused
VC-CB-A
Technical data
Electrical data in acc. with IEC 61076-2-101
Rated voltage
Rated surge voltage
Rated current
Surge voltage category / Pollution degree
Material data
Contact carrier material
Connection data
Stripping length
Connection cross-section
Connection cross-section
Temperature data
Ambient temperature (operation)
[V]
[kV]
[A]
[mm]
[mm 2 ]
AWG
250
4
10
III / 2
PA-GF
8
0.14 mm² ... 1.5 mm² (stranded)
22 ... 16
-40°C ... 125°C
Male contact carrier, for turned and rolled contacts
Order No.
u P
Pcs. /
Pkt.
1855018
1855021
1855034
1855047
1855319
10
10
10
10
20
1607884 10
1607888 10 a b a+6
ø 4,3 / M4
Design
VC 1
VC 2
VC 3
VC 4
362
Number of positions
15
30
50
65
a
[mm]
42.8
57.8
72.8
87.8
Dimension table
b
[mm]
31.5
46.5
61.5
76.5
PHOENIX CONTACT
c
[mm]
40.0
55.0
70.0
85.0
ø 3,5 c
Mounting cutout VC-D...-PE
1 ) Ø 2.5 for supplied ST2,9 screw
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370
Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
a
VC-D...-ST...-PE
Inhalt 9 7% Breite s kaliert

Appliance plug connectors – VARIOCON
Type
VC-D1-BU15-PE
VC-D2-BU30-PE
VC-D3-BU50-PE
VC-D4-BU65-PE
VC-D-AF
VC-CB-T
VC-CB-A
250
4
10
III / 2
PA-GF
8
0.14 mm² ... 1.5 mm² (stranded)
22 ... 16
-40°C ... 125°C
Female contact carrier, for turned contacts
Order No.
u P
Pcs. /
Pkt.
Type
1855050
1855063
1855076
1855089
1855319
10
10
10
10
VC-D1-BU15-PE-R
VC-D2-BU30-PE-R
VC-D3-BU50-PE-R
VC-D4-BU65-PE-R
20 VC-D-AF
1607884 10 VC-CB-T
1607888 10 VC-CB-A
250
4
10
III / 2
PA-GF
8
0.14 mm² ... 1.5 mm² (stranded)
22 ... 16
-40°C ... 125°C
Female contact carrier, for rolled contacts
Order No.
u P
Pcs. /
Pkt.
1884801
1884791
1884788
1884775
10
10
10
10
1855319 20
1607884 10
1607888 10 a+6 a+6 a a
VC-D...-BU-PE VC-D...-BU...-PE-R
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370
Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PHOENIX CONTACT
363
Inhalt 9 7% Breite s kaliert