Course Title:
Course Number:
Course Credit:
Motorcycle Service 1
8766110
1
Course Description:
The Motorcycle Service 1 course prepares students for entry into the motorcycle service industry. Students explore career opportunities and
requirements of a professional motorcycle mechanic. Students study safety requirements, tools and equipment, set-up procedures, and routine
preventative maintenance.
CTE Standards and Benchmarks
04.0
Recognize personal and industry safety requirements--The student will be able to:
04.01 List the federal and state standards for health and safety, including OSHA and the "Right-to-Know" law.
04.02 Outline the safety requirements for shop organization and management.
04.03 Recognize the safety requirements for the use of industry tools and equipment.
04.04 List the fire-safety precautions.
04.05 Recognize electrical-safety precautions.
05.0
Verify the proper use and care of basic shop tools and equipment--The student will be able to:
05.01 Categorize general and specialized hand tools.
05.02 Examine and use power tools.
05.03 Classify and use fasteners.
05.04 Document proper use of air tools.
05.05 Utilize oxy-acetylene welding outfit for heating, welding, brazing and cutting.
05.06 Use heating devices to perform service procedures.
06.0
Outline the appropriate set-up procedures--The student will be able to:
06.01 Inspect and interpret vehicle identification number information.
06.02 Inspect tires; check and adjust air pressure.
06.03 Check for proper fluid levels.
06.04 Utilize electrical test equipment to isolate defective components and check lamp circuits.
1
CTE Standards and Benchmarks
06.05 Inspect and fill battery.
06.06 Clean engine.
06.07 Install cables, hoses and electrical assemblies.
06.08 Inspect cables, connectors, clamps and hold-downs; adjust as necessary.
06.09 Read and interpret a wiring diagram.
06.10 Troubleshoot and repair wiring harnesses.
07.0
Show proficiency in performing routine preventative maintenance services--The student will be able to:
07.01 Compare and contrast typical motorcycle lubricants and lubricant properties.
07.02 Inspect and test head and tail lamp circuits; aim headlights and replace bulbs.
07.03 Inspect battery terminals and the state-of-charge test; perform slow/fast battery charge.
07.04 Inspect and clean battery cables, connectors, clamps and hold-downs; repair or replace as needed.
07.05 Inspect and test fusible links, circuit breakers and fuses; replace as needed.
07.06 Check radiator coolant level (if applicable), test and add coolant.
07.07 Check fluid levels and change fluids and the tightness of the oil filters.
2
Course Title:
Course Number:
Course Credit:
Motorcycle Service 2
8766120
1
Course Description:
The Motorcycle Service 2 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1 for entry into the
motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study
measurement systems, fasteners, thread repair, and math.
CTE Standards and Benchmarks
08.0
Compare and contrast the differences in the measurement systems, fasteners and thread repair--The student will be able to:
08.01 Describe and distinguish the different types of measurement systems.
08.02 Compare and contrast the different types of fasteners.
08.03 Explain the steps of inspecting, cleaning and replacement of broken fasteners.
08.04 Describe the sequence of tightening and torqueing fasteners to specs.
08.05 Compare and contrast the different stress fractures of fasteners
09.0
Illustrate industry-related math skills--The student will be able to:
09.01 Measure tolerance(s) using millimeters and inches.
09.02 Perform metric to SAE (and SAE to metric) conversions.
09.03 Perform correct measurements using different precise metering tools. T handle measuring tool.
09.04 Perform correct measures using Vernier Calipers.
09.05 Perform correct measures using Micrometers.
3
Course Title:
Course Number:
Course Credit:
Motorcycle Service 3
8766130
1
Course Description:
The Motorcycle Service 3 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1 & 2 for entry into the
motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study parts
inventory, repair ordering, basic services and minor repairs, basic frame, and suspension.
CTE Standards and Benchmarks
13.0
Show proficiency in parts inventory identification and repair order processing--The student will be able to:
13.01 Read and interpret information in parts and service manuals and other technical media.
13.02 Read and understand graphs, charts, diagrams and tables commonly used in the industry.
13.03 Write and process work orders.
13.04 Prepare cost estimates for jobs using service and flat-rate standards.
13.05 Perform basic parts inventory tracking with the latest computer updates.
13.06 Interpret and verify complaint; determine needed repairs. If find more than first estimated ask customer if ok to do repairs.
14.0
Perform basic services and minor repairs--The student will be able to:
14.01 Identify, select and use appropriate replacement parts.
14.02 Clean or replace after inspection of air filtration.
14.03 Service and check batteries, if not charging then replace.
14.04 Service lubrication systems.
14.05 Name the components of air and liquid cooling systems by name and function.
14.06 Remove, remount and balance tires.
14.07 Diagnose, service and repair chain and belt final drive components.
15.0
Perform basic frame and suspension service--The student will be able to:
15.01 Categorize the different front- and rear-suspension systems and explain their operation.
15.02 Compare the parts and functions of different frames and suspension systems.
4
CTE Standards and Benchmarks
15.03 Explain how wheels, tires and suspension affect chassis performance and driveability.
15.04 Replace and true a wheel assembly.
15.05 Diagnose and service wheel bearings and seals.
5
Course Title:
Course Number:
Course Credit:
Motorcycle Service 4
8766140
1
Course Description:
The Motorcycle Service 4 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2 & 3 for entry into the
motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study
electrical system services.
CTE Standards and Benchmarks
16.0
Perform basic electrical system service--The student will be able to:
16.01 Assess and use basic electrical system test equipment.
16.02 Use basic DC electrical theory to select appropriate test procedures.
16.03 Inspect and test fusible links, circuit breakers and fuses; replace as needed.
16.04 Check electrical circuits with a test light; determine needed repairs.
16.05 Troubleshoot and repair battery-operated electronic ignition systems.
16.06 Troubleshoot and repair magneto-ignition systems.
16.07 Troubleshoot and repair capacitive-discharge-ignition (CDI) systems.
16.08 Troubleshoot and repair half-wave and full-wave charging systems.
16.09 Troubleshoot and repair three-phase charging systems.
16.10 Troubleshoot and repair electrical starter systems.
16.11 Troubleshoot and repair Direct-Current (DC) Generators.
16.12 Troubleshoot and repair Warning systems.
6
Course Title:
Course Number:
Course Credit:
Motorcycle Service 5
8766150
1
Course Description:
The Motorcycle Service 5 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3 & 4 for entry into
the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study
diagnostics, service, and repair of cooling systems, and engine components.
CTE Standards and Benchmarks
17.0
Diagnose, service, and repair cooling systems--The student will be able to:
17.01 Categorize the components of air and liquid cooling systems by name and function.
17.02 Diagnose service and repair air-cooling systems.
17.03 Diagnose service and repair liquid cooling systems.
18.0
Diagnose, repair and recondition basic engine components--The student will be able to:
18.01 Explain the engine operating theory.
18.02 Recondition a two-stroke engine top-end.
18.03 Recondition a single-cylinder four-stroke engine top-end.
18.04 Recondition a multi-cylinder four-stroke engine top-end.
18.05 Rebuild a four-stroke head.
18.06 Recondition a single-cylinder four-stroke engine bottom-end.
18.07 Recondition a multi-cylinder four-stroke engine bottom-end.
18.08 Recondition a two-stroke engine bottom-end.
18.09 Service a plain-bearing crankshaft.
18.10 Diagnose and repair oil-delivery systems.
7
Course Title:
Course Number:
Course Credit:
Motorcycle Service 6
8766160
1
Course Description:
The Motorcycle Service 6 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, & 5 for entry into
the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study the
science of motorcycles, frames, and suspension systems.
CTE Standards and Benchmarks
19.0
Apply industry-related science to motorcycle service--The student will be able to:
19.01 Explain how temperature extremes, chemical reactions and moisture content affect motorcycle systems.
19.02 Draw conclusions or make inferences from data.
20.0
Diagnose, service, and repair frames and suspension components--The student will be able to:
20.01 Service and repair front suspension.
20.02 Service and repair rear suspension.
20.03 Inspect, remove, and replace frames.
8
Course Title:
Course Number:
Course Credit:
Motorcycle Service 7
8766170
1
Course Description:
The Motorcycle Service 7 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, & 6 for entry
into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study
wheels, tires, and brakes.
CTE Standards and Benchmarks
21.0
Diagnose, service, and repair wheels, tires and brakes--The student will be able to:
21.01 Diagnose and repair mechanical disc and drum brake systems and components.
21.02 Diagnose and repair hydraulic disc and drum brake systems and components.
21.03 Diagnose and repair ABS braking systems and other advanced stopping systems.
9
Course Title:
Course Number:
Course Credit:
Motorcycle Service 8
8766180
1
Course Description:
The Motorcycle Service 8 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, 6, & 7 for
entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students
study drive trains, fuel, and exhaust systems.
CTE Standards and Benchmarks
22.0
Diagnose, service, and repair drive trains--The student will be able to:
22.01 Diagnose, service, and repair primary-drive systems.
22.02 Diagnose, service, and repair clutch assemblies.
22.03 Diagnose, service, and repair transmissions.
22.04 Diagnose, service, and repair shaft drives.
22.05 Diagnose and repair kickstart systems.
23.0
Diagnose, service, and repair fuel and exhaust systems--The student will be able to:
23.01 Identify components and operation of carburetion and fuel-injection systems.
23.02 Diagnose service and repair slide-type carburetors.
23.03 Diagnose service and repair constant-velocity-type (CV-type) carburetors.
23.04 Diagnose service and repair fixed-venturi carburetors.
23.05 Diagnose service and repair fuel-injection systems.
23.06 Diagnose service and repair exhaust systems replace necessary components as needed.
23.07 Diagnose service and repair other fuel-delivery-system components.
10
Course Title:
Course Number:
Course Credit:
Motorcycle Service 9
8766190
1
Course Description:
The Motorcycle Service 9 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, 6, 7, & 8 for
entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students
study troubleshooting and repair of electrical system components.
CTE Standards and Benchmarks
24.0
Troubleshoot and repair electrical-system components--The student will be able to:
24.01 Utilize electrical test equipment to isolate defective components.
24.02 Read and interpret a wiring diagram.
24.03 Troubleshoot and repair wiring harnesses.
24.04 Troubleshoot and repair battery/points ignition systems.
24.05 Troubleshoot and repair battery-operated electronic ignition systems.
24.06 Troubleshoot and repair magneto-ignition systems.
24.07 Troubleshoot and repair capacitive-discharge-ignition (CDI) systems.
24.08 Troubleshoot and repair half-wave and full-wave charging systems.
24.09 Troubleshoot and repair three-phase charging systems.
24.10 Troubleshoot and repair electrical starter systems.
24.11 Troubleshoot and repair direct current (DC) generators.
24.12 Troubleshoot and repair warning systems.
11
Course Title:
Course Number:
Course Credit:
Motorcycle Service 10
8766200
1
Course Description:
The Motorcycle Service 10 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, 6, 7, 8, & 9
for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic.
Students study tune-up, engine reconditioning, and proper use of industry tools/equipment.
CTE Standards and Benchmarks
25.0
Tune up motorcycles--The student will be able to:
25.01 Diagnose driveability problems.
25.02 Adjust the cam chain tension.
25.03 Adjust the valve clearances.
25.04 Replace the ignition points, condenser, and spark plugs.
25.05 Check and set the ignition timing.
25.06 Adjust the carburetor and service the fuel-delivery systems.
25.07 Service the air-filtration systems.
25.08 Service and diagnose batteries.
25.09 Service the lubrication systems.
26.0
Diagnose, repair, and recondition engines--The student will be able to:
26.01 Explain the engine operating theory.
26.02 Recondition a single-cylinder four-stroke engine top-end.
26.03 Recondition a multi-cylinder four-stroke engine top-end.
26.04 Recondition a two-stroke engine top-end.
26.05 Rebuild a four-stroke head.
26.06 Recondition a single-cylinder four-stroke engine bottom-end.
26.07 Recondition a multi-cylinder four-stroke engine bottom-end.
26.08 Recondition a two-stroke engine bottom-end.
26.09 Rebuild a built-up crankshaft.
12
CTE Standards and Benchmarks
26.10 Service a plain-bearing crankshaft.
26.11 Diagnose and repair electric-starter drive systems.
26.12 Diagnose and repair oil-delivery systems.
27.0
Demonstrate the proper use of industry tools and equipment--The student will be able to:
27.01 Utilize oxyacetylene welding outfit for heating, welding, brazing and cutting.
27.02 Use heating devices to perform service procedures.
27.03 Recondition cylinders.
13