LP5R | Recessed
Find additional images and information at alwusa.com/lp5r

LIGHTPLANE 5 – LP5R
Recessed
1. BASE MODEL
2. RUN LENGTH/
SIZE
LP5RT
LP5RTRL
LP5RMUD 2
LP5RHF 1
5” trimmed with flush lens
5” trimmed with regressed lens
5” trimless, mud-in with flush lens
5” trimless, hidden-flange with flush lens
1 Not available with TGRID or or ATZ/TGRID
2 Not available with ceiling type DRY below. Select only with GRID, SLOT,
ATZ/TGRID, ATZ/SLOT or OTHER.
SPECIFICATIONS
Page 2 of 7
Type:
___
___
Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’)
Continuous row or Configuration 3 (enter total linear length, ex: 20’)
3 A configuration is a custom shape (rectangle square, L, etc.) with mitered corners.
Must choose quantity of mitered corners in Additional Options.
All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required.
3. CEILING TYPE DRY 5
TGRID 4
Drywall (non-mud-in)
T-Grid
SLOT Slot T-Bar
ATZ/TGRID 4 Armstrong ® Techzone T-Grid
ATZ/SLOT
OTHER
Armstrong ® Techzone Slot T-Grid
Additional ceiling types may be available. Contact factory.
4 Not available with LP5R/HF
5 Select only with LP5RT, LP5RTRL and LP5RMUD
Continued on Next Page...
TGRID SLOT
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com

LIGHTPLANE 5 – LP5R
Recessed
4. LAMPING –
PRIMARY
SPECIFICATIONS
Page 3 of 7
LED 6
LOW 7
MED
HI 7
TUNE 8
DECOR 6
RGB
Pair lamping with CCT (where applicable), ex: MED/2700K
Low-output, high-performance LED – 587 delivered lm/ft, 7.3 W/lf, 80 lm/W
2700K 3000K 3500K 4000K
Medium-output, high performance LED – 783 delivered lm/ft, 9.8 W/lf, 80 lm/W
2700K 3000K 3500K 4000K
High-output, high-performance LED – 979 delivered lm/ft, 12.2 W/lf, 80 lm/W
2700K 3000K 3500K 4000K
Tunable white LED, 2700K-5700K – 653 delivered lumens, 8.2 W/lf, 80 lm/W
(must select DMX driver below; controller not included)
Decorative constant voltage LED – 286 delivered lm/ft, 4.4 W/lf, 48 lm/W
3000K 3500K 4000K
Color-changing RGB LED, 5 W/lf
(must select DMX driver below; controller not included)
6 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
7 Performance calculations are extrapolated estimates based on the actual
IES test results of MED option at 3500K
8 Performance calculations are extrapolated MAXIMUM estimates for mid-range
CCTs based on the actual IES test results of MED option at 3500K. Cooler and warmer
CCT settings will provide lower delivered lumens, lower lm/W and higher W/lf.
FLUORESCENT Lamps not provided
1T5
1T5HO
1T5S 9
1T5HOS 9
2T5
2T5S 9
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
Standard output, 2-lamp profile T5
Standard output, 2-lamp profile T5, staggered
9 For staggered lamping, EXT lens is recommended for maximum diffusion properties
Continued on Next Page...
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com

LIGHTPLANE 5 – LP5R
Recessed
5. DRIVER –
PRIMARY
SPECIFICATIONS
Page 4 of 7
NONE None. Select when specifying only Downlight Lamping
LED
0/10V/ 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0%
DALI DALI dimming to 0%
DMX DMX dimming to 0%
HILUME/A3 Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
FLUORESCENT
STD
FL/0/10V
HILUME
Standard, non-dimming, <10% THD
Dimming, 0-10V
Lutron Hi-Lume® dimming
BALLASTAR Step-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
6. LENS/LOUVER –
PRIMARY
NONE
EXT/F
None. Select when specifying only Downlight Lamping
Extra diffuse, flush lens
7. ACCENT
DOWNLIGHT
NONE
MR16/LED
None. Select when specifying only Linear Lamping
GU5.3 base for retrofitting with MR16 LED (lamps not included)
Lamp transformer and compatibility shall be checked by others.
ALW will provide transformer information on submittal drawings.
CZEN800 LED COB Downlight, 9.5 W, 790 lm, 40° beam, 3000K
CZEN1000 LED COB Downlight, 12.7 W 1040 lm, 40° beam, 3000K
CZEN1200 LED COB Downlight, 15 W 1275 lm, 60° beam, 3000K
CZEN1500 LED COB Downlight, 21 W 1550 lm, 40° beam, 3000K lm = raw lumens; Watts include driver loss
8. DRIVER –
ACCENT
DOWNLIGHT
NONE None. Select when specifying only Linear Lamping OR MR16/LED
0/10V/ 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0%
HILUME/A3 Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver specifications provided upon request to assist with control system integration
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 30984 Santana Street n
Hayward, CA 94544 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com

LIGHTPLANE 5 – LP5R
Recessed
9. ACCESSORY –
ACCENT
DOWNLIGHT
NONE
LSS
SOL
HEX
SNT
None.
Linear spread lens
Solite lens
Hexcell louver
Snoot
Select one only. For different accessory types on different downlights, contact factory.
10. QUANTITY –
ACCENT
DOWNLIGHT
NONE
___
None. Select when specifying only Linear Lamping OR MR16/LED driver
Enter total quantity downlights per run length
For total quantity considerations, please note each downlight requires 7.25” of linear length in the housing
SPECIFICATIONS
Page 5 of 7
11. FINISH AL
BK
WH
RAL/ ___
Standard, natural “Ultimatte” aluminum
Black powdercoat
White powdercoat
Specify RAL powdercoat code (ex: #RAL/3003)
12. VOLTAGE 120
347
11
277 12
UNV
13
120 volt
277 volt
Universal voltage
347 volt
11 For MR16/LED dimming, consult LED retrofit lamp manufacturer for voltage dimmer compatibility
12 Dimming with 277 volt not recommended for LED retrofit lamps. For dimming with CZEN800 or CZEN100 lamps using 277 volt, HILUME/A3 or 0/10V/0 driver must be specified.
13 Driver/ballast options may be limited with 347 voltage. Consult factory.
13. ADDITIONAL
OPTIONS
NONE None
EMC/___ 14 Emergency circuit (indicate total quantity, ex: EMC/4)
EMB/___ 14
OS/___ 15
Emergency battery pack
Occupancy sensor
(indicate total quantity, ex: EMBP/4)
(indicate total quantity, ex: OS/4)
PH___ 15
MC/___
Photocell/daylight sensor (indicate total quantity, ex: PH/4)
Mitered corners (indicate total quantity of mitered corners, ex: MC/4 for a rectangle)
14 Consult factory for available options
15 Limitations exist depending on size and specification. Consult factory for options and details
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com

LIGHTPLANE 5 – LP5R
Recessed
5 "
5 "
5 13 ⁄
16
"
6 "
LP5RT
TGRID or ATZ/TGRID
5 "
5 13 ⁄
16
"
LP5RT
DRY
5 "
Slot
Support
Bracket
SPECIFICATIONS
Page 6 of 7
5 "
6 "
LP5RHF
SLOT or ATZ/SLOT
5 "
5 5 ⁄
8
" 5 5 ⁄
8
" 5 5 ⁄
8
"
5"
5 5 ⁄
8
"
6"
LP5RTRL
TGRID or ATZ/TGRID
5"
5 5 ⁄
8
"
6"
LP5RTRL
SLOT or ATZ/SLOT
5"
5 5 ⁄
8
"
LP5RTRL
DRY
5"
11 ⁄
16
"
5"
6 1 ⁄
8
"
9 1 ⁄
16
"
LP5RMUD
DRY
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com

LIGHTPLANE 5 – LP5R
Recessed
HOUSING
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers are Class 2. LED light engine is LM-80 compliant with 80+ CRI. ETL listed for damp location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details.
DOWNLIGHT ACCESS MITERED CORNERS
Downlights are centered a in 7.5" long, hinged panel that opens to provide access for lamp installation, replacement and/or maintenance
Consult factory for mitered corner angle options
Page 7 of 7
LINEAR LENS
Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with no-source visibility.
Choose from flush or regressed assembly.
DOWNLIGHT AIMING
PERPENDICULAR AIMING
MR16/LED* 40˚
CZEN800 30˚
CZEN1000 30˚
CZEN1200 20˚
CZEN1500 20˚
PARALLEL AIMING
MR16/LED* 50˚
CZEN800 35˚
CZEN1000 35˚
CZEN1200 20˚
CZEN1500 20˚
*Angle may vary based on specific lamp used
DOWNLIGHT ACCESSORIES
LINEAR
SPREAD LENS
SOLITE LENS HEXCELL
LOUVER
SNOOT
FINISH
Standard finish is "Ultimatte" aluminum — a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black and color RAL powdercoat options also available.
ALUMINUM – AL WHITE – WH
BLACK – BK COLOR – RAL
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com