K2 SERIES™ FLOODLIGHT
Par 38 Metal Halide
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
Configure Ballast Housing Separately
K2
Example:
Series
K2
Ballast Housing Required
- PAR3870 -66-BZP
- 9 -11-
A
INTEGRAL BALLAST HOUSINGS:
HP2 - HP2 Housing PM3 - Universal Power Module 3
PM3D - Universal Power Module 3 Dual
PCII - Power Canopy II
PCIII - Power Canopy III
PPII - Power Pipe II
TMB - Pole Mount or Tenon Mount
K2 - K2 Series™ Floodlight
Source
PAR3870 - PAR38 Metal Halide (70W)
PAR38100 - PAR38 Metal Halide (100W)
PAR38150 - PAR38 Metal Halide (150W)
Lamp Type
0
66
67
68
69
70
71
72
73
74
-
-
-
-
-
-
-
-
-
-
REMOTE BALLAST HOUSINGS:
HP2RM - HP2 Remote Housing
PM3RM - Universal Power Module 3 Remote
PM3DRM - Universal Power Module 3 Dual Remote
RM - Remote Wall Mount
DRM - Dual Remote Wall Mount
By Others
PAR38/MH/SP(70W), 15° Spot
PAR38/MH/FL(70W), 30° Flood
PAR38/MH/WFL(70W), 65° W. Flood
PAR38/MH/SP(100W), 15° Spot
PAR38/MH/FL(100W), 30° Flood
PAR38/MH/WFL(100W), 65° W. Flood
PAR38/MH/SP(150W), 20° Spot
PAR38/MH/FL(150W), 35° Flood
PAR38/MH/WFL(150W), 65° W. Flood
Finish
Standard Finish
Premium Finish
Powder Coat Color
Satin
Wrinkle
ABP
Bronze
BZP
BZW
CMG Cascade Mountain Granite RMG Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
SDS
Cracked Ice
Sonoran Desert Sandstone
Black
BLP
BLW
AQW Antique White
CRMCream
SMG Sierra Mountain Granite
White (Gloss)
WHP
WHW
BCM Black Chrome
HUG Hunter Green
TXF
Aluminum
SAP
—
BGEBeige
MDS Mojave Desert Sandstone
WCP Weathered Copper
Verde
—
VER
BPP
NBP
WIR
CAP
Lens Type
Antique Brass Powder
9 - Clear (Standard)
Brown Patina Powder
Clear Anodized Powder
10 - Spread Lens*
OCP
Natural Brass Powder
Textured Forest
Weathered Iron
Also available in RAL Finishes
See submittal SUB-1439-00
Old Copper
12 - Soft Focus Lens*
13 - Rectilinear Lens*
Shielding
11 - Honeycomb Baffle*
*Accommodates up to 2 Lens/Shielding media
Cap Style
A - 45° B - 90° C -Flush
D -45° without Weep Hole
E -90° without Weep Hole
(Interior Use Only) (Interior Use Only)
SOURCE DATA
BK No.
66
67
68
69
70
71
72
73
74
Lamp Watts
70
70
70
100
100
100
150
150
150
Description
70PAR38/MH/SP
70PAR38/MH/FL
70PAR38/MH/WFL
100PAR38/MH/SP
100PAR38/MH/FL
100PAR38/MH/WFL
150PAR38/MH/SP
150PAR38/MH/FL
150PAR38/MH/WFL
B-K LIGHTING
Rated
Life
7,500
7,500
7,500
7,500
7,500
7,500
8,500
8,500
8,500
Center Beam
Candlepower
28,000
16,000
4,000
40,000
21,000
6,000
34,000
17,000
7,500
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
Beam
Angle
15°
30°
65°
15°
30°
65°
20°
35°
65°
Beam
Type
Spot
Flood
Wide Flood
Spot
Flood
Wide Flood
Spot
Flood
Wide Flood
SUBMITTAL DATE
DRAWING NUMBER
3-27-14
SUB-1212-01
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
K2 SERIES™ FLOODLIGHT
Par 38 Metal Halide
PROJECT:
TYPE:
K2
K2
“A/D” CAP
“B/E” CAP
11
11
113/4"
3/4"
3/4"
(299mm)
(299mm)
(299mm)
“C” CAP
1/2"
Dia.
5551/2"
1/2"Dia.
Dia.
(140mm)
(140mm)
(140mm)
8"
8"
8"
(203mm)
(203mm)
(203mm)
Patented
Patented
Patented
Anti-Condensation
Anti-Condensation
Anti-Condensation
Valve
Valve
Valve(ACV™)
(ACV™)
(ACV™)
7"
7"
7"
(178mm)
(178mm)
(178mm)
1"
1"
1"
(25mm)
(25mm)
(25mm)
22211/16"
11/16"
11/16"
(68mm)
(68mm)
(68mm)
Mounting:
Canopies
Power Pipe™
Patented
Patented
Patented360HD™
360HD™
360HD™
Mounting
Mounting
MountingSystem
System
System
Power Canopy™
Power Pipe II™
PM2D & PM2
HP2RM
TMB
HP2
Ballasts:
PM2DRM & PM2RM
DRM & RM
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
Accessories (Configure separately)
Ballast Housings (Configure separately)
Mounting:
Canopies
Ballasts:
Power Canopy™
SPECIFICATIONS
PM3D & PM3
GreenSource Initiative™
Metal and packaging components are made from recycled
materials. Manufactured using renewable solar energy, produced
onsite. Returnable to manufacturer at end of life to ensure cradleMounting:
to-cradle handling. Packaging contains no chlorofluorocarbons
(CFC’s). Use of this product may qualify for GreenSource efficacy
and recycling rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Materials
Furnished in Copper-Free Aluminum (Type 6061-T6).
HP2
Cap
Fully machined. Accommodates [2] lens or louver media. Choose
from 45° cutoff (‘A’ or ‘D’), 1” deep bezel with 90° cutoff (‘B’ or ‘E’)
or flush lens (‘C’) cap styles. ‘A’ and ‘B’ caps include weep-hole for
water and debris drainage. ‘D’ and ‘E’ caps exclude weep-hole and
are for interior use only.
Lens
Shock resistant, tempered, glass lens is factory adhered to fixture
cap and provides hermetically sealed optical compartment.
Source
Body
For use with 150 watt maximum, Par38 metal halide lamp.
machined.
waterPM2D & PM2
Canopies Unibody design
Powerprovides
Canopy™ enclosed,Power
Pipe II™
HP2
proof wireway and integral heat sink for maximum component
Water Management
life. Integral knuckle for maximum mechanical strength. High
Patented Anti-Condensation Valve (ACV™) vacuum seals optical
temperature, silicone ‘O’ Ring provides water-tight seal.
chamber and eliminates internal condensation. Spring loaded
exterior mounted ACV™ button facilitates removal of vacuum
Knuckle
sealed cap for lamp service. System re-initiates vacuum seal
Mounting:
Patented 360HD™ Mounting System features a mechanical
through normal fixture operation.
taper-lock, which allows a full 180° vertical adjustment without
the use of serrated teeth, which inherently limit aiming. High
Ballast
temperature, silicone ‘O’ Ring provides water-tight seal and
For use with remote metal halide ballast. See ballast technical data
compressive resistance to maintain fixture position. Design
to determine lamp-to-ballast distance and wiring requirements
withstands 73 lb. static load prior to movement to ensure decades
prior to detailing field installation of any remote wiring.
of optical alignment. ½” pipe thread for mounting. Biaxial
source control additionally provides 360° horizontal rotation
Socket
in addition to vertical
adjustment. ’Aim-And-Lock’ Technology
Specification grade ceramic body lamp holder rated for 4kV
Canopies
KMJ™
Power Pipe™
allows precision adjustment without the redundant tightening
starting pulse. Medium base, nickel-plated copper alloy lamp
and loosening of knuckle screw.
grip and screw shell. Corrosion resistant coil spring under center
contact.
Fully
Power Pipe™
PM3DRM & PM3RM
HP2RM
TMB
Wiring
Teflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL
1659 standard. Leads extended 6” beyond knuckle.
Ballasts:
Hardware
Tamper-resistant, stainless steel hardware. 360HD™ hardware
is additionally black oxide treated for additional corrosion
resistance.
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free
process cleans and conversion coats aluminum components prior
to application of Class ‘A’ TGIC polyester powder coating.
TMB
HP2RM
Warranty
5 year limited warranty.
PM2DRM & PM2RM
DRM & RM
Certification and Listing
ETL Listed to ANSI/UL Standards 1598. Certified
to CAN/CSA
Remote
Ballasts:
Standard C22.2 No 250.0-08. RoHs compliant. Suitable for indoor
or outdoor use. Suitable for use in wet locations. Additionally
suitable for installation within 4’ of the ground. IP66 Rated.
Made in USA.
®Teflon is a registered trademark of DuPont Corporation.
HP2RM
PM2DRM & PM2RM
Mounting:
B-K LIGHTING
DRM & RM
DRM & RM
Remote Ballasts:
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
360HD Patent is covered in whole or in part by U.S. Patent No. 6,161,948; ACV™ Patent is covered in whole or in part by U.S. Patent No. 6,254,258 B1
SUBMITTAL DATE
3-27-14
DRAWING NUMBER
SUB-1212-01
5"
(127mm)
2 1/4"
(47mm)
POWER CANOPY II™ SYSTEM
Ballast Housing
PROJECT:
Specify Fixture Separately
TYPE:
CATALOG
NUMBER:
LAMP(S):
NOTES:
CATALOG NUMBER LOGIC
PCII
Example
Series
MT
PCII -H100M - MT
PCII - Power Canopy II™ System (Specify Fixture Separately)
Ballast Type
H100E - (100W) Electronic
H150E - (150W) Electronic
Input Voltage
MT - 120/208/240/277 Volt Multi Tap
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
-22° F
H100M
Magnetic
120
129
1.50
HX-HPF
H100M
Magnetic
277
118
0.35
HX-HPF
-22° F
H150M
Magnetic
120
185
1.90
HX-HPF
-22° F
H150M
Magnetic
277
173
0.75
HX-HPF
-22° F
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-2086-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
a
m)
5"
(127mm)
2 1/4"
(47mm)
POWER CANOPY II™ SYSTEM
Ballast Housing
PROJECT:
Specify Fixture Separately
TYPE:
CANOPY
SIDE VIEW
Specify fixture
separately
8" Dia
(203mm)
5"
(127mm)
Specify fixture
separately
1 3/8 "
(35mm)
1 3/8 "
(35mm)
5"
(127mm)
2 1/4"
(47mm)
2 1/4"
(47mm)
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from
recycled materials. Manufactured using renewable
solar energy, produced onsite.
Returnable
to manufacturer at end of life to ensure cradleto-cradle handling.
Packaging contains no
chlorofluorocarbons (CFC’s). Use of this product
may qualify for GreenSource efficacy and recycling
rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Installation
Universal design accommodates a single
fixture (specified separately). Two wire
entrance knockouts will accept 1/2” conduit
or Romex connectors. Four 3/16” wall
plate mounting holes. (Mounting hardware by
others).
Canopy Housing
Fully machined from copper-free aluminum.
Stainless steel hardware. Gasket provides seal
between housing and canopy.
Ballast
[1] 100-150 watt, integral, high power factor,
magnetic ballast. Multi-Tap (120/208/240/277V)
primary voltage 50/60Hz. 50/60Hz.
Wiring
Teflon® coated wire, 18AWG, 600V, 250° C rated and
certified to UL 1659 standard.
Hardware
Tamper resistant, stainless steel hardware.
B-K LIGHTING
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage
chromate-free process cleans and conversion coats
aluminum components prior to application of Class
‘A’ TGIC polyester powder coating. Finish to match
fixture (specified separately.)
Warranty
5 year limited warranty.
Listings
ETL listed. Made in USA.
®Teflon is a registered trademark of DuPont Corporation
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-2086-00
3 3/4"
(95mm)
2 1/4"
(47mm)
POWER CANOPY III™ SYSTEM
Ballast Housing
PROJECT:
Specify Fixture Separately
TYPE:
CATALOG
NUMBER:
LAMP(S):
NOTES:
CATALOG NUMBER LOGIC
PCIII
Example
Series
MT
PCIII-H20E - MT
PCIII - Power Canopy III™ System (Specify Fixture Separately)
Ballast Type
H20E - (20W) Electronic
H35E - (35W) Electronic
H70E - (70W) Electronic
Input Voltage
MT - 120/208/240/277 Volt Multi Tap
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
H20E*
Electronic
120
24
0.20
HPF
-5° F
H20E*
Electronic
277
24
0.09
HPF
-5° F
H35E*
Electronic
120
44
0.39
HPF
-5° F
H35E*
Electronic
277
44
0.17
HPF
-5° F
H70E*
Electronic
120
79
0.67
HPF
-5° F
H70E*
Electronic
277
79
0.29
HPF
-5° F
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-2087-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
3 3/4"
(95mm)
2 1/4"
(47mm)
POWER CANOPY III™ SYSTEM
Ballast Housing
PROJECT:
Specify Fixture Separately
TYPE:
CANOPY
SIDE VIEW
Specify
Specify
fixture
fixture
separately
separately
7"7"
Dia
Dia
(178mm)
(178mm)
1 3/8
1 3/8
" "
(35mm)
(35mm)
3 3/4"
3 3/4"
(95mm)
(95mm)
2 1/4"
2 1/4"
(47mm)
(47mm)
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from
recycled materials. Manufactured using renewable
solar energy, produced onsite.
Returnable
to manufacturer at end of life to ensure cradleto-cradle handling.
Packaging contains no
chlorofluorocarbons (CFC’s). Use of this product
may qualify for GreenSource efficacy and recycling
rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Installation
Universal design accommodates a single
fixture (specified separately). Two wire
entrance knockouts will accept 1/2” conduit
or Romex connectors. Four 3/16” wall
plate mounting holes. (Mounting hardware by
others).
Canopy Housing
Fully machined from copper-free aluminum.
Stainless steel hardware. Gasket provides seal
between housing and canopy.
Ballast
[1] 20-70 watt, integral, high power factor, electronic
ballast. Multi-Tap (120/208/240/277V) primary
voltage 50/60Hz. 50/60Hz.
Wiring
Teflon® coated wire, 18AWG, 600V, 250° C rated and
certified to UL 1659 standard.
Hardware
Tamper resistant, stainless steel hardware.
B-K LIGHTING
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage
chromate-free process cleans and conversion coats
aluminum components prior to application of Class
‘A’ TGIC polyester powder coating. Finish to match
fixture (specified separately.)
Warranty
5 year limited warranty.
Listings
ETL listed. Made in USA.
®Teflon is a registered trademark of DuPont Corporation
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-2087-00