79A T8 Industrial Indirect T8 FEATURES The clean, simple 79A is well-suited for light industrial environments. One, two or three T8 lamps in cross-section give you wide flexibility in choosing mounting height and light levels. 33% open reflector provides direct and indirect illumination–ideal for open plenum and high ceiling environments. •• Up to 91.2% optical efficiency. •• Ideal for open plenum applications and high-tech industrial environments. •• Provided with convenient and easy-to-use adjustable aircraft cable mounting with straight feed cord. EXAMPLE 79A - t SERIES 4 t - - 2 32 t t NOMINAL TOTALWATTAGE/ LENGTH LAMPSTYPE F - t FIXTURE TYPE •• 33% open perforated reflector provides direct and indirect illumination. •• Bottom and sides of housing are free of knockouts and holes for a clean, architectural appearance. •• 7/8” knockout at each end allows for continuous row mounting. •• This fixture is proudly made in the USA. - OP TIONS t E B2 - UNV t OPTIONS/ ACCESSORIES BALLAST TYPE t VOLTAGE ORDERING INFORMATION SERIES 79A OPTIONS T8 Industrial Indirect For generic EM ballast options (must specify voltage), see page 231. Clear coat finish over bare CLR pretreated metal C2_ Two-circuit quick-connect wiring harness. See page 235 for complete quick-connect offering. NOMINAL LENGTH 4 8 4’ 8’ TOTAL LAMPS 2, 3, 4, or 6 (2- or 3-lamp cross-section) 86 4’, 32-watt T8 8’, 59-watt T8 (2-lamp cross-section only) 8’, 86-watt T8 (2-lamp cross-section only) FIXTURE TYPE F J ACCESSORIES See page 131 for alternate mounting accessories. LAMP WATTAGE/TYPE 32 59 79AW Wall Mount fixture also available. See page 202. Electrical feeder unit, 3-conductor, straight white cord standard (wire gauge to be determined by row length), single-circuit quick-connect wiring harness, two end caps included Joiner unit, single-circuit quickconnect wiring harness BALLAST TYPE See page 230 for complete ballast offering. 2-lamp electronic ballast EB2 3-lamp electronic ballast EB3 4-lamp electronic ballast EB4 EB3/3 (2) 3-lamp electronic ballasts VOLTAGE 120 277 UNV 347 120V 277V 120-277V 347V SPECIFICATIONS •• Housing – 20-gauge die-formed C.R.S. •• Reflector – 22-gauge die-formed C.R.S. with 33% open perforation for downlight component. •• Finish – 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. •• Electrical – Electronic ballast standard, instant start T8, rated Class P. •• Mounting – Suspended. 1/16” diameter adjustable steel leveling aircraft cable and mounting hardware necessary for grid ceiling applications provided. •• Labels – UL/CUL listed as fluorescent luminaire suitable for dry or damp locations. Two 32-watt T8 Lamps 4-1/4” 11-1/2” www.hewilliams.com Information contained herein is subject to change without notice. LGV30917.062512MP Suspended | 129