CommonPath Nurse Call Solution SS-SIP Session Initiation Protocol Services CommonPath Session Initiation Protocol Services provide RFC standard 3261 SIP support for resolving telephony endpoints on an IP network. The primary function of this interface is to allow connecting and streaming voice audio data from 3rd SIP compliant telephony technologies to CommonPath Nurse Call patient stations. Works with any 3rd party telephony that supports SIP Trunking and the RFC 3261 SIP Standard. Please check with your account manager to validate interoperability with the chosen 3rd party technology for your installation. Current Validated Support: Cisco CUCM 4.0 – 9.2 Avaya SES 5.0 Nortel Communications Server 1000 Release 4.5 Vocera VSTG Technical Specifications Servers: Server specifications for the software runtime environment are based on the current minimum standards and desired environment configuration. Please check with your account manager to review the current minimum server requirements. Network: 100 Base T Network Speed Minimum Operating System: Windows 2008 Server R2 x64 Windows 2012 Server x64 Database: Microsoft SQL Server 2008 R2 Pre-Requisites: Microsoft .Net 4.5 required CommonPath ETH-5000 Hardware per CCT SS-NC-CommonPathCoreServices Requires a CommonPath telephony data interface for the given technology: o SS-Cisco o SS-OAI * Software Licensing Required for all CAS software. * Assumes existing Telephony Infrastructure that supports SIP Trunking. ©Copyright 2015 Critical Alert Systems, Inc. Information contained in this document is proprietary and confidential. 1-888-846-8346 info@criticalalert.com www.nursecall.com