TN – Teneo™
TYPE
•
Clean, contemporary styling that stands the test of time
•
Acrylic lens will not yellow over time
•
Ideal for way finding or general illumination
•
Features energy efficient fluorescent sources
•
Angled lens transition available
•
Available in two and four lamp arrangements
•
Wall mount version available
•
Base made of cast aluminum for corrosion resistance
•
Powder coat finish in 13 standard colors with a
polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. LAMP ARRANGEMENT
4. COLOR
1. LUMINAIRE
STRAIGHT ACRYLIC WHITE LENS
 TN8 (8')
 TN12 (12')
TN10 (10')
TN14 (14')
STRAIGHT POLYCARBONATE WHITE LENS
 TN8-P (8')
TN10-P (10')
 TN12-P (12')
TN14-P (14')
WALL MOUNT WITH STRAIGHT ACRYLIC WHITE
LENS
 TN WM (Height determined by lamp selection)
WALL MOUNT WITH STRAIGHT POLYCARBONATE
WHITE LENS
 TN WM-P (Height determined by lamp selection)
 AWT (Arctic White)
 BLK (Black)
 MTB (Matte Black)
 DGN (Dark Green)
 DBZ (Dark Bronze)
 WRZ (Wheathered Bronse)
 BRM (Metallic Bronze)
 VBL (Verde Blue)


T8 fluorescent
 T8-32 (32 watts, 46" lens)
T5-14 (32 watts, 22" lens)
3. LAMP ARRANGEMENT


 CRT (Corten)
 MAL (Matte Aluminum)
 MDG (Medium Grey)
 ATG (Antique Green)
 LGY (Light Grey)
 RAL/PREMIUM
2X (2 lamps at 180 degrees)
4X (4 lamps at 90 degrees)
TN
SPECIFICATIONS
HOUSING
Teneo top, intermediate and base shall be cast
aluminum. All cast aluminum components shall be
certified as pure #356 alloy, free of any porosity,
foreign materials, or cosmetic fillers. Teneo body
shall be made from ¼" thick, 5" O.D. thick extruded
aluminum. All extruded aluminum components
COLOR (Provide RAL)
shall be alloy 6061-T6, 6063-T5 or equal. The cap
 CUSTOM COLOR
(Provide color chip for matching) shall be removable without tools and shall provide
easy access to the optical chamber. The lens shall
be one-piece acrylic or polycarbonate cylinder
ANG (Angled lens)
PHC (Button-type photo cell)
FLUORESCENT (120 thru 277 volt ballast)

5. OPTIONS
5.OPTIONS
2. LAMP/BALLAST
T5 fluorescent
 T5-28 (28 watts, 46" lens)
 T5-21 (21 watts, 34" lens)
4. COLOR
ELECTRICAL
The electrical assembly shall be comprised of a
high power factor electronic fluorescent ballast
designed to run up to four lamps. Twist-lock rotary
locking sockets are utilized, however, spring
(plunger) style sockets are available for highvibration application (consult factory). Ballasts are
wired at the factory for 277 volts, unless specified
MOUNTING
Ground Mount - Teneo shall use 5/8" x 24" x 3"
anchor bolts, double hex nuts and flat washers
hot dipped galvanized steel. A bolt circle template
shall be provided.
Wall Mount - The wall plate features four 11/32"
holes for 5/16" bolts. Mounting hardware not
included.
FINISH
Fixture finish shall consist of a five stage
pretreatment regimen with a polymer primer
sealer, oven dry off, and top coated with a
thermoset super TGIC polyester powder coat
finish. The finish shall meet the AAMA 605.2
performance specification which includes
passing a 3000 hour salt spray test for corrosion
resistance.
See next page
JOB
TYPE
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 2.15
NOTES
| 1 |
TN – Teneo™
TYPE
CERTIFICATION
The fixture is listed with ETL for outdoor, wet location use.
Conforms to UL1598 and Canadian CSA Std., C22.2 no.9.
DIMENSIONS
10'
WARRANTY / TERMS AND CONDITIONS OF SALE
Download:
http://www.hubbelllighting.com/resources/warranty/
9'
8'
AAL reserves the right to change product specifications without notice.
7'
6'
5'
25.5" (T514)
35.0" (T521)
48.375" (T832/T528)
4'
3'
2'
1'
20"
10.625"/266mm
TN
ANG option
Wall mount
Isoilluminance Diagram
CATALOG NUMBER: 505-12-4T8
FILENAME: 505-4T8.IES
TN T8
WATTAGE: 104
LUMEN OUTPUT: 8253
B2 U5 G2
FORWARD LIGHT
LUMEN
1.1% FL30 o
128
o
7.4%888
FM60
FH80 o
6.4%
764
2.5%304
FVH90 o
BACK LIGHT
BL30 o
BM60 o
BH80 o
BVH90 o
1.1%
7.4%
6.4% 2.5%
128
888
764
304
UPLIGHT
UL100 o 5.7%
UH180 o 28.3%
688
3396
0.05
UPLIGHT
49.5%
Multiplier
-------------1.000
DOWNLIGHT
50.5%
0.444
0.250
0.160
0.111
0.082
0.063
0.049
0.040
1.
0.5
0.1
EFFICACY: 28.8
Mounting
Height
----------10
15
20
25
30
35
40
45
50
2.
0.2
0.01
0.02
Mounting Height = 10 '. Each box is one mounting height.
10' MOUNTING HEIGHT
IES files can be found at www.aal.net
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 2.15
| 2 |