L-101
Edge Finishing Machine for
shaping, sanding and transfer
finish decoration of panels and
furniture parts
The L-101 is designed for the shaping,
sanding and dry transfer finish decoration of edges on engineered board.
The result is a high quality finished edge
which requires no further processing –
our system eliminates the need for staining or lacquering.
You save time and money.
The L-101 also guarantees complete
manufacturing flexibility: It is possible to
change to a completely different profile in
less than thirty minutes. This includes
changing the cutting heads, sanding
units, application wheel and foil design.
© L. KURZ 01/2001
next
print
Specifications
Dimension of components
min. 76 x 76 mm
Characteristics
Part thickness
min. 3 mm - max. 38 mm
Profile face
max. 45 mm
Part feeding speed
3 m/min.
Electrical supply
400 Volt, 3 Phase, 50 Hz,
5.5 kW
Shaping
The twin-knive carbide tipped
shaping head equipped with finest
high speed ball bearing ensures a
cutting system of the highest quality.
Changes in cutting heads for a new
shape are implemented quickly and
with the assurance of accurate repositioning.
Dust collection
150 mm diameter pipe
Length
1600 mm
Width
600 mm
Height
1300 mm
Net weight
approx. 340 kg
Sanding and hotstamping head
Sanding
The sanding strip is produced from
the same template used to make the
cutting blades in the shaper head.
This precise match between shaper,
sander and applicator wheels guarantees superior finishing and crisp
miters. The selfcleaning sanding
head stays cool, even after hours of
constant operation and can be
changed in seconds.
Stamping
The TOUCHWOOD® foil is applied
by a infrared heated silicone rubber
wheel. To maintain complete quality
control the wheel has been shaped
by the same template used to produce the cutting blades and sanding
strips.
Construction is subject to change without notice.
As of 05/01 all product related information is void prior to this date.
© L. KURZ 01/2001
next
print