Product specification 26 WAY MQS STRAIGHT HEADER TO BE

advertisement
26 WAY MQS STRAIGHT HEADER
TO BE SOLDERED ON PRINTED
CIRCUIT BOARD
Product specification
108-15106
05 December 07 Rev. E
This specification covers the conditions of use, mechanical and electrical performances of Tyco
Electronics 26 way MQS straight headers.
1. DESCRIPTION
Housing : Material : 20 % glass reinforced PBT.
Coding : mechanical and visual (colors).
PCB mounting : ears for rivets or screws.
Polarization on the PCB.
Contacts: Dimension : 0,63 x 0,63 mm.
Material : bronze.
Plating : pre tin plated or post plating - selective gold plated over nickel on contact area.
- selective tin plated over nickel on soldered area.
2. REFERENCE DOCUMENT
P/N
Interface specification
Pcb interface
X-185226-X
208-15550
See customer drawing
3. CONDITIONS OF USE
•
Temperature
- operating of temperature : - 40°C / + 85°C
- test temperature : - 40°C / + 100°C
•
Nominal voltage : 12V
•
Sealing : not applicable.
Drawn by : J. LAQUERBE
Date : 30 May 1997
Approved by : J.J. REVIL
Tyco Electronics France SAS, B.P. 30039 95301 CERGY-PONTOISE Cedex Tél. : 01 34 20 88 88 Fax : 01 34 20 86 00
This document, managed by Tyco Electronics France is archived in Startec database.
A pintout cannot be considered as a controlled document.
Date : 30 May 1997
1 to 2
26 WAY MQS STRAIGHT HEADER TO BE SOLDERED
ON PRINTED CIRCUIT BOARD
108-15106
4. TEST
Tests are carried according to IEC 512 series.
TEST
REF.
TEST CONDITIONS
REQUIREMENTS
General examination
Visual examination
No defect that would impair
normal operation
1a
Electrical test
Insulation resistance
3a
Voltage : 100 V
Ri ≥ 50MΩ
Method A : test between one contact and the
others
Dielectric withstanding
voltage
4a
Voltage : 1000 V AC during 1 min. A.C.
No breakdown or flashover
Mechanical test
Free fall
Ed
Fall from 1 meter height on hard concrete
No damage
Contact retention in the
housing
15a
Applied a axial force of 25 N
No damage
Soldering heat test
Heat the connector at 160°C for 3 min
No visible damage
Keying on the pcb
Applied force 50 N
Will not fit the PCB
Applied force 50 N
Will not fit the PCB
Polarization on the pcb
2 to 2
13c
Rev. E
Download