Gravity Capacitor
Page 1 of 9
MAIN SITE | WEIRD PROJS. | GOOD STUFF | NEW STUFF | HELP |
"ELECTRIC ROCKET"
CAPACITOR ARRAY GRAVITY WARP DRIVE
LETHAL DANGER: THIS DEVICE IS AN ENERGY-STORAGE CAPACITOR. IT
PRESENTS AN EXTREME ELECTROCUTION HAZARD AND MANY OTHER
HAZARDS BESIDES. (ENERGY STORAGE CAPACITORS AT HIGH JOULE
VALUES CAN CAUSE FLESH TO DETONATE LIKE A BOMB.) IF YOU ARE NOT
TRAINED AND EXPERIENCED WITH HIGH VOLTAGE AND CAPACITOR SAFETY
ISSUES, DO NOT BUILD OR OPERATE THIS DEVICE. IT CAN KILL YOU VERY
EASILY. EVEN THE EXPERIENCED PROFESSIONALS HAVE BEEN KILLED BY
THIS TYPE OF DEVICE. USING IT IS FAR MORE DANGEROUS THAN USING
LOADED WEAPONS OR EXPLOSIVE MATERIALS.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Jump down to main article
ORIGINAL Tom Kennedy correspondence (wrong)
LATER Tom Kennedy correspondence (1991) (admits it's TT Brown Gravitator)
T. Brown: How I Control Gravitation (Rex Research)
T. Brown Electro-gravity Device
T. Brown patent GB 300,311
Serrano's recent patent for similar device
Notes from Bill B.
Pos. results(5/31/2001) Daniel H.
Neg. results (6/6/2000)
Negative results (6/5/2000)
"C" Positive results (5/2000)
"S", Positive results (3/2000)
{ NEW 10/2000 metal foil pattern PDF file (not yet tried)
{ Correspondence
{ Foil ring image (.GIF)
{ Foil ring diagram (.GIF)
{ Exper. to try next (.GIF)
D. Buehler, capacitor weight-loss (4/2004)
John P report (2/2001, neg results)
James B's site
Suggested construction
Newspaper article (pdf) on grav-cap
Another similar set of plans
Antigravity Page
The Morton Effect
Other weird projects
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 2 of 9
BILLB DATA
NOTES:
z
z
z
If it's about 25uA leakage at 2KV for 24 layers, then for 390 layers it will be 400uA (about a
watt,) storing 48 millijoules. Or, if driven by a 20uA VandeGraaff, the leakage will only allow
voltage to rise to a few hundred volts if using 390 layers.
If it's 1500pF (measured) for 24 layers, then it will be .024uF for 390 layers
If it's .32in thick (measured) for 24, then a stack of 390 will be 5.2in tall (compressed down to 4in
min?)
DC KV Power Supplies
z
z
Negative Ion Generators
VDG machines
http://winter-wolff.com/#Capacitor_materials
Norm S. found this:
J B Dental Supply (Calif USA)
Tin foil, $8/lb
800 333-7141
SOME IDEAS (assuming anyone can get it to work)
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 3 of 9
1/16/2002
The original paper was half bogus. See below. It doesn't look very certain that Kennedy every obtained
any thrust.
3/31/2000
If a capacitor-stack is divided in two by a thick dielectric plate, does it reduce the thrust? (In other
words, is the 3D shape of the device important?) If we build two separate ones, do they interact? Does it
interact with pieces of matter of various compostion? Magnets? Electrets? Why does it affect
electronics? Alters transistors? Makes xtal clocks run fast? Alters dielectric of capacitors? Resistor
values?
3/23/2000
India ink is conductive. Try printing the electrode pattern onto paper, then glue the printed paper sheets
alternately with wax paper sheets to form a very solid stack.
3/23/2000
Will smaller electrode-rings also create a thrust? If so, then print arrays of small rings on the paper,
instead of single large rings. If electrically charged during construction, and if there are no connections
between them, then these rings will still operate even if the whole capacitor is chopped into pieces.
Create antigrav-matter by fabricating ring-shaped regions of charge into solid blocks of quartz or other
insulator. Antigravity building materials become feasible. Paper-stack bricks and morter can construct a
floating mass!
3/22/2000
If the metal rings are adjusted so they they are slightly offset rotationally from each other, so that the
slots in the metal rings SPIRAL lengthwise through the capacitor... will it produce torque and not just
linear thrust?
3/22/2000
This device should not work! The inner plates are +-+-+- symmetrical, and should not contribute any
forces. If the charge polarity of the end-plates controls the direction of the large thrust, then perhaps the
end-plates determine the direction, while the rest of the stack acts like an "amplifier" with positive
feedback causing maximum thrust. If so, the power supply of this "amplifier" is an energy source of
unknown nature. Perhaps the entire thrust can be controlled by a small signal applied to just one endplate. Switch it on and off, and thus create a piston engine.
3/18/2000
If the force is directional and not just up/down relative to the Earth, then the capacitor can be attached to
a wheel rim with thrust-axis tangent to the rim, and used to run a generator. Like a water wheel, but the
"paddles" are driven by "aether flow?" But if we cover the wheel-rim with capacitors, does it increase
the thrust, or will the "gravity flux" connect into a circle and produce less force?
OLD:
If it runs with several thousand volts but essentially zero current, then use a DuLuc Drypile as a
permanent power supply. Print the drypile onto the same paper stack as the electrodes.
ORIGINAL PAGE:
This file below is INCORRECT. The author apparently never built the device himself, since he later
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 4 of 9
wrote to others and said the stuff below is in error. See the files on vacuum-energy.com Among other
things, Kennedy says that the foil sectors must be staggered, that the entire stack should be driven from
copper foil plates on the end (not from individual strips on the sides.) He used a layer of glue under his
foils (making them asymmetric,) and the capacitor is suppsed to be driven by rapid high voltage pulses
of a single polarity (not by a "strong battery" as originally claimed.) The original paper says that tin foil
is required and aluminum won't work. Later letters say he used aluminum foil because he couldn't get
the tin! First he said that wax paper is the dielectric, later he said that it has to be a high-K material. The
patent date is 1928, not 1930, and the patentee is Thomas Townsend Brown (UK patent No. 300,311)
=================================================
This file is several years old. I've called and left messages with the author twice and wrote once, all with
no responses. (Update: someone on freenrg-L contacted the author's family and found that he had been
killed in a car accident.)
I don't understand why the author didn't include a patent number. A cursory search of 1930 patents
shows nothing called "electric rocket" or similar, but a more intensive search could be performed. I
wouldn't be suprised to discover that the article is a hoax, with the goal being to get someone to put
massive effort into building a foil-stack capacitor with thousands of layers, each made of many small
parts! Fascinating idea though, and very much in line with T.T.Brown's work with the small apparent
gravity forces generated by large capacitors at high voltage.
-Bill B. (more)
The device is actually a variation on the 19'th century Fizeau's
condenser, and was invented quite by accident, in the early 1930's,
by a 17-year old tinkerer.
The boy patented the device as the "Electric Rocket." The patent
was bought by the Standard Oil Company of New Jersey, which is
today called MOBIL, for about one million dollars, which in the
1930's was a staggering some of money.
I'm not sure how long the boy lived after selling his invention to
the fine people of Standard Oil, but I do know that he was sworn to
secrecy, and that his million dollar fortune was contingent on
keeping his mouth shut.
Of course, all of this information, with the exception of actual
design description, is readily available to the public, which is
how I learned of it, and subsequently figured out that the "cylindrical grid" was indeed a simple variation of Fizeau's condenser.
The device can and will make fossil fuels obsolete, and, by eliminating the fossil fuel industry, which is the cornerstone of the
American Economy, force our government, and the industrial dynasties
that control it, to release all the other suppressed discoveries
that will advance our civilization beyond even the most wild fantasies of science fiction.
The better the plate/dielectric materials used, the better it works.
Truly,
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 5 of 9
Thomas Kennedy
370 Thornycroft Ave.
Staten Island, NY 10312
P.S.
This is for real
FIG. 1
FIG. 2
Use waxed paper for the dielectric. Cut it into rings, as illustrated, with a large hole in the center. Use TIN foil (NOT aluminum) as the "plate" material. Make sure to center the plates on
the dielectric, so as to leave ample margin between outer and
inner edges of the dielectric, as this is vital to proper func-
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 6 of 9
tioning.
Connect the plates to each other using very thin strips of tin
foil, laid on top, and set toward the outer edge, but not going
beyond the edges of the plates.
Leave a long, thin strip of tin foil laid on top of a plate and
extending out, to be used for charging the array.
Curved plates work better than rectangular.
curved plates, as well as rectangular ones.
Round off corners on
You will have to stack hundreds of such layers.
paper rings on each layer.
Use TWO waxed
Leave the positive charging strips aligned on one side of the
array, and all the negative strips aligned on the other.
When the array is completed, you just roll and crimp them together,
in bunches of two dozen or so, tack them with solder (don't damage
the dielectric)
Wire all positive strips to each other, and all negative strips to
each other, so that positive and negative plates charge from opposite sides of the array.
The capacitor stack must be tightly clamped together, or it will
not work. You can use pieces of stout boards, with holes in the
center correspoinding to the diameter of the holes in the center
of the dielectric, perhaps slightly smaller.
The layers must be perfectly aligned to form a cylindrical grid.
The gravitational warp forms in the central cavity of the cylinder.
Two sheets of paper, then one layer of seven plates, then two more
sheets of paper, then another 7 plates, etc. Pos. plate layer,
then neg. plate layer, then pos., neg., etc.
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 7 of 9
FIG. 3
The boards are held together by a number of long bolts. The bolts
must NOT TOUCH the stack, or it will short out, and discharge in a
very dangerous manner.
The boards must be larger in diameter than the stack, as illustrated above.
The dotted circle represents the diameter of the dielectric.
Note that all these drawings are in correct proportions, and a
working model can be built to the actual size depicted, using the
drawings as templates.
The device described here is 8-1/4" long by 6" in diameter. Even
a small device of this type will build a very powerful charge, and
substantial thrust, and should be used with extreme caution.
PAGE 4 MISSING FROM ARTICLE ??!
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 8 of 9
FIG. 4
There are 8 bolts, but
only 2 are shown here,
for ease of simplicity.
Insulate the entire
array when completed
This unit is based on an antique Fizeau's condenser, which uses
tin foil and waxed paper. Modern, solid-state plate-dielectric
components may be used instead, with far better results. The same
principles apply, whether you use waxed paper or titanium dioxide,
so the basic design remains the same. Follow the instructions,
modify when necessary, and you should have no major problems.
The "attractive force" between + and - plates of a plate capacitor
varies inversely with the square of the distance. This is the same
relationship as in gravitation, because IS gravitation. Although
the inverse relationship holds true for other vector fields as well
as gravitational fields, there is no other plausible explanation
for the strong attraction between the plates. "Conventional" science speaks of "opposite charges attracting", but what is really
occuring is gravitational attraction. All electrostatic attraction
and repulsion is gravitational in nature. "Conventional" scientific dogma is geared toward maintaining the current socioeconomic
status quo, and suppressing scientific understanding is paramount
to preventing the widespread understanding of the true nature and
potential uses of the forces of nature, such as electrostatic energy. The invention I've described is an example of how scientific
knowledge can upset the status quo.
This device was actually invented in the 1930's, by a 17-year old
http://www.amasci.com/caps/capwarp.html
5/25/2004
Gravity Capacitor
Page 9 of 9
amateur experimenter, who was just trying to make a new version of
the old Fizeau's condenser, but discovered a revolutionary new propulsion system, which he patented as the "Electric Rocket."
The Standard Oil Company of New Jersey (now MOBIL) bought the patent from the boy for the then-staggering sum of one million dollars.
The young inventor was sworn to secrecy, and, in fact, signed a
contract that called for the forfeiture of his million should he
divulge the secrets of his invention. Why? Because this device
can and will make fossil fuels obsolete! Not only can it provide
clean, save, and efficient propulsion for vehicles, aircraft,
spacecraft, and machinery of every type, it can also be used to
run ordinary electrical generators, and garner far more energy
than is needed to keep it running.
The current ignorance of the established status quo would dismiss
this out of hand with the label, "perpetual motion device," which,
of course, is impossible.
That means that our solar system, as well as the entire universe,
is "impossible," since everything is in perpetual motion in a
swirling vector field known as gravity.
The better you make these devices, and the greater the capacity of
the dielectric materials used, the longer it will produce a "jet
stream" of open-curve gravitation, or gravitational waves, before
it needs another "top-off" charge.
In other words, if you were to use titanium dioxide dielectirc compounds in this thing, it could conceivably keep going for CENTURIES
ON A SINGLE CHARGE!
z
Notes from Bill B.
z
Report of success
Antigravity Page
The Morton Effect
Other weird projects
z
z
z
http://amasci.com/caps/capwarp.html
Created and maintained by Bill Beaty. Mail me at: billb@eskimo.com.
If you are using Lynx, type "c" to email.
http://www.amasci.com/caps/capwarp.html
5/25/2004