waterproofing
roof
photovoltaic
integrated
cells
soprasolar mono
®
soprasolar® mono · lightness & fiability
SOPREMA, worldwide specialist of
waterproofing, has developed the
Green mark to identify the products
and services that are specifically part
of the sustainability approach of the
company. Thanks to its characteristics, the Soprasolar®
range, Green mark, is an environmentally friendly solution.
Soprasolar® Mono : single-layer waterproofing with
integrated photovoltaic cells from the Soprasolar® range.
In this, the early 21st century, environmental and energy issues
have put the search for renewable energy at the top of the
agenda.
SOLARDIS has teamed up with SOPREMA, worldwide
specialist of waterproofing, to offer a range of waterproofing
complexes that include flexible photovoltaic cells, such as
Soprasolar® Mono. The solution is lightweight, aesthetic
and strong, making it ideal for the large areas provided by
inaccessible flat roofs, for both new buildings and refurbishment
projects.
With Soprasolar®, you can start generating
renewable energy and show your commitment to
sustainable development!
* go to www.soprasolar.com
Guarantees and insurances
+ Latent product defects: third-party liability covered by
AXA® Corporate Solutions
+ Waterproofing membrane: guaranteed for 20 years by the
manufacturer SOPREMA, when applied by a qualified
professional in accordance with application rules
+ Application of the waterproofing : 10 years insurance of
qualified waterproofing contractors
+ 80% of the useful power guaranteed as regards the cell
output for 25 years by the manufacturer Unisolar®
soprasolar
mono
lightness
fiability
®
3
2
TECHNICAL DATA
Layer Soprasolar®
Mono Cap
Composition
Soprasolar® Cell 68
Elastomer binder with 250 Peak power: 68 Wp
g/m² heavy composite
No-load voltage: 23.1 V
reinforcement
Short circuit current:
5.1 A
PPM voltage: 16.5 V
PPM intensity: 4.1 A
Soprasolar® Cell 136 Soprasolar® Cell 144
Peak power: 136 Wp
No-load voltage: 46.2 V
Short circuit current: 5.1 A
PPM voltage: 33 V
PPM intensity: 4.1 A
Peak power: 144 Wp
No-load voltage: 46.2 V
Short circuit current: 5.3 A
PPM voltage: 33 V
PPM intensity: 4.36 A
Application Specifications approved by a technical inspector
BRoof T3 fire class
Dimensions
Surface
density
L. 600 or 680 cm long
W. 104 cm wide
T. 0.4 cm thick
L. 285 cm long
W. 39.5 cm wide
T. 0.28 cm thick
L. 549 cm long
W. 39.5 cm wide
T. 0.28 cm thick
L.549 cm long
W.39.5 cm wide
T.0.28 cm thick
5,4 kg/m²
3,5 kg/m²
3,5 kg/m²
3,5 kg/m²
Total mass of the complex: 8.9 kg/m2 (or 5.4 + 3.5)
single-layer photovoltaic waterproofing · soprasolar® mono
Presentation
Soprasolar® Mono is a single-layer waterproofing system
with integrated photovoltaic cells designed to produce electricity from
sunlight. It consists of a self-protected SBS bituminous single-layer
membrane that integrates flexible photovoltaic cells.
This single-layer system has been developed specially in collaboration
with United Solar Ovonic, UNISOLAR®, the worldwide specialist in
photovoltaic products, in order to ensure the optimal integration of
the photovoltaic function into the waterproofing system.
Destination
Like the Soprasolar® Duo complex, Soprasolar® Mono
is designed for inaccessible flat roofs on bearing elements and
substrates in masonry and cellular concrete (pitch equal to 2% or
more) or on ribbed steel decks, wood and wood-derivative boards
(pitch equal to 3% or more), on new buildings or for refurbishment
work.
Soprasolar® Mono is ideal for buildings which have large areas
exposed to solar radiation such as:
- Industrial or office buildings
- Large and medium retail outlets
- Logistics platforms
- Public buildings, etc...
photovoltaic
waterproofing
Application of Soprasolar® Mono, self-protected silicon finish
Application
g
Applied by sealing on an underlay fastened mechanically to substrates in masonry, wood, existing
waterproofing (class C insulation), non sealable insulation.
3
g
Applied by direct sealing on sealable insulation 4
(mineral wool with bituminous surfacing, Perlite with
bituminous surfacing, cellular glass with HAC surfacing).
Soprasolar® photovoltaic cells
+ High performance (single-layer)
+ 4-mm thick mono reinforcement (underlay
and photovoltaic cells not included)
+ A proven and reliable technique
+ Full adherence and homogeneity with the
substrate
+ No flapping or fatigue due to the wind
+ Application possible on class C insulation
and above
+ L4 static ball penetration hardness
(maximum in FIT classification)
+ BRoof T3 fire class
+ Easy maintenance
+ Waterproofing without the cells
Inverter
Outgoing
meter
Utility grid
Incoming
meter
Working principal
ELECTRICAL NETWORK ACCESSIBLE
FOR MAINTENANCE, WITH PROTECTION FOR
THE THERMAL INSULATION
The cells are connected to the electrical
network on the surface, allowing easy
access for maintenance, and protecting
the thermal insulation.
®
QUESTIONNAIRE FOR THE STUDY OF A SOPRASOLAR® PROJECT
to be completed for a project study. Information to be supplied to your waterproofing contractor.
Identification of requester
Name :
Name of requester* :
Position :
Post code :
Phone* :
Fax :
Identification of project
Designation of project* :
(useful surface required: 21 m²/kWp)
Architect :
Project manager :
Location* (post code + town) :
Date of start of work* :
Business :
Firstname :
Adress :
Town :
Email* :
Power (kWp) :
Project owner :
Information about the roofing :
please could you provide a layout plan with directions and the location of obstacles (skylights, chimneys, piping etc.)
and state their height. (the plan may be sent by email in .dwg format)
Renovation*  or new*  Supporting element* :
Roofing accessible (in the meaning of building regulations) : yes  no 
Slope* :
% (necessarily between 2% (concrete), 3% (steel and wood) and 100 %)
Total area* (m²) :
Length* (m) :
width* (m) :
Elements liable to cast shadows* (trees, chimneys, skylights, parapets etc.) :
Please state the location and height of obstacles* :
Other information :
Environment (provide pictures if possible)
Approximate roof height (m) :
Exposure of the relevant building :
Other buildings above the relevant roof* ? yes  no  Distance + height :
Accessibility of worksite (delivery, assembly) :
(in absence of the information, the offer shall be based on delivery by semitrailer)
Presence of a utility connection terminal to the low-voltage electricity network* :
Yes  distance from building (m) :
No 
Please circle the sketch or sketches that you think are the most representative :
Building with one or more
overlooking buildings
Isolated building
Building with distant overlooking
buildings
(* information required)
- 62 rue Transversale - 92622 GENNEVILLIERS - FRANCE - +33 (0)1 46 88 01 80 - Fax : +33 (0)1 46 88 01 89 - e-mail : contact@soprasolar.com - www.soprasolar.com
SOLARDIS reserves the right to alter the composition and conditions of use of its materials and thus their prices, without notice, depending upon developments in knowledge and techniques. As a result, all orders shall only be accepted on the terms and in
accordance with the technical specifications effective on the date of receipt of the order.