Radio
remote control
system ZSP
RIVAL series receivers
Four channel universal
radio receiver RV434
advanced possibilities and easy
operate with LED display
single remote removing possibility
four separated channel outputs
PIN code for better safety
superheterodyne radio receiver with quartz
frequency stability for better range
supply: 12 to 24V AC/DC
compatible with ZSP series remotes: Neo, Tip, Makster
Receiver's main application is to control gate
automatics and electric devices, such as: lighting,
water pomps, air conditioning and other according
to ideas and needs.
www.dtm.pl
Radio remote control system ZSP
RIVAL series receivers
Four channel universal
radio receiver RV434
eters
Basic param
supply: 12-24V AC / DC
max current consumption: 120mA
remotes memory capacity: 700 (ZSP series remotes: NEO, TIP, MAKSTER),
every has it's own number
working temperatures: -20°C / +55°C
enclosure dimensions (LxDxH): 55x27,5x118 mm karta wejœcia / wyjœcia
mounting: outside mounting, splash-proof case, IP-53
weight: 90 g
System parkingowy CAR KEEPER
CK6/6RX
Outputs
relay outputs (type / number / max. load): NO / 4 / 1A 24V AC/DC
working modes: monostable, bistable, momentary
turn on time in monostable mode: 0,1s up to 102min (0,1s grid)
Radio parameters
radio module: integrated, superheterodyne, high reliability, reproducibility,
interference proof
®
transmission protection: 64-bit long Keeloq , dynamic code
modulation / frequency: ASK / 433,92MHz
antenna impedance: 50Ù
antenna: built in whip antenna, connector for external one
ers
Other paramet
memory cell: contains information about every remote and its preferences
®
microcontroller: 8-bit Microchip 18Fxxxx family
memory type: EEPROM, non-volatile, mounted in socket
(convenient for service purposes)
critical event protection: modern microcontroller architecture (Watch Dog, Brown Out Detect,
Power On Reset)
Functionality
standard user interface: hardware interface with LED display and 2 push buttons
®
computer user interface: user friendly software, Windows based, USB connection
software function: all receiver functions, possibilities to make a memory data copy
and use PC as event database
PIN code: yes
remote preferences: remote buttons to receiver's outputs assignment
all memory erase: yes
single remote delete possibility: yes, even without its presence
single remote blockade: yes
"simple learning" of a new remote: yes
accidental usage protection: yes, "double click" function
simple learning blockade: yes
"copy preferences from
remote number 001 function: yes
memory copying: B700 module
Available accessories:
- USB cable for PC connection and software
- B700 module for memory copying
www.dtm.pl