Radio remote control system ZSP RIVAL series

advertisement
Radio remote
control system ZSP
RIVAL series receivers
Two channel universal
receiver RV432
advanced functions
and very simple programming
(LED diodes interface)
output channel turn on time regulated
built in superheterodyne receiver
stabilised with quartz resonator
supply: 12 - 24V AC / DC
compatible with ZSP series remotes:
NEO, TIP, MAKSTER
Receiver's main application is to control gate
automatics and electric devices, such as: lighting,
water pomps, air conditioning and other
according to ideas and needs.
www.dtm.pl
Radio remote control system ZSP
RIVAL series receivers
Two channel universal
receiver RV432
eters
Basic param
supply:
max. current consumption:
remotes memory capacity:
working temperatures:
enclosure dimensions (LxDxH):
mounting:
weight:
12–24V AC/DC
100mA
35 (ZSP remote controls)
-20°C / +55°C
55x27,5x118 mm
surface - outside mounting, splash-proof case, IP-53
80 kg
Outputs
relay outputs
(type / number / max. load):
working modes:
turn on time in monostable mode:
NO / 2 / 1A 24V AC or DC
monostable, bistable, momentary
0,5s, from 1s to 127s (1s resolution for times up to
1 minute and 1min resolution for times
from 1min to 127 min)
Radio parameters
radio module:
transmission protection:
modulation / frequency:
antenna impedance:
antenna:
integrated, superheterodyne, high reliability
reproducibility, interference proof
64-bit long Keeloq®, dynamic code
ASK / 433,92MHz
50Ù
built in whip antenna, connector for external antenna
ers
Other paramet
memory cell:
microcontroller:
memory type:
critical event protection:
contains information about every remote and its preferences
®
8-bit Microchip 12Fxxx family
EEPROM, non-volatile, inside microcontroller
modern microcontroller architecture (Watch Dog,
Brown Out Detect, Power On Reset)
Functionality
user interface:
remote preferences:
whole memory erase:
single remote delete possibility:
"simple learning" of a new remote:
new remote registering without
using receiver button:
hardware interface with 6 diodes and 2 push buttons
remote buttons to receiver's outputs assignment
yes
yes, deleted remote presence necessary
yes
yes, easy remote registering function
www.dtm.pl
Download