APCON INTELLAFLEX 36 Port 1G/10G Multi Function Blade Highest port density advanced services blade with packet deduplication, protocol stripping, configurable packet slicing and sub-10ns time stamping – available on every port. The INTELLAFLEX Multi Function Blade fully supports all base INTELLAFLEX features such as packet aggregation, Multi Stage Filtering, and load balancing This high-density 36-port blade offers the most flexibility in packet deduplication, protocol stripping and tagging, configurable packet slicing and time stamping based on a variety of precision network time protocols. Additionally, a full set of APCON INTELLAFLEX intelligent network monitoring features is included with no additional per-port licensing or additional modules required! INTELLAFLEX Benefits ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Achieve 100% network visibility High port density saves rack space Reduce network monitoring CAPEX and OPEX Aggregate data streams Multi Stage Filtering for specific tool outputs Increased analysis tool efficiency Longer analysis tool lifespan Reduce data volume Maintain session integrity Deduplication Features ▪ Line rate deduplication at 1G or 10G ▪ Multiple blades per chassis ▪ Selectable on Ingress and Egress Packet Slicing Features ▪ ▪ ▪ ▪ ▪ Configurable byte offset Line rate packet slicing at 1G or 10G New CRC calculated and appended Increase tool processing efficiency Extends data recording time windows Time Stamping Features ▪ ▪ ▪ ▪ Industry leading sub-10ns-level precision Supports GPS, PTP, IRIG-B, NTP Line Rate stamping at 1G or 10G in groups of 12 Supports PPS for multi-blade and chassis synchronization ▪ 8-byte time stamp appended to packet payload ▪ Time stamping available on all ports A modern data center is faced with a variety of network monitoring challenges. Duplicate packets create the largest challenge for IT and security personnel, including monitoring tool oversubscription, false positives, and inaccurate performance reporting. It is estimated that network monitoring traffic can consist of up to 55% duplicate packets that diminish tool bandwidth, reduce storage capability, and decrease tool effectiveness. Product Description The APCON INTELLAFLEX Multi Function Blade provides the industry’s highest port density and flexibility – offering 36 ports of 1G/10G Ethernet with packet deduplication, protocol stripping, packet slicing, and time stamping with each service being selectable on every port. In addition, INTELLAFLEX features such as packet aggregation, Multi Stage Filtering, and load balancing allow this blade to be deployed in a standalone configuration, given its integrated aggregation function, or interspersed within a chassis of varying INTELLAFLEX blades. This blade also provides unprecedented scalability – up to 288 fully capable ports in an 8RU chassis. Software Defined Services The Multi Function Blade architecture is designed to be flexible to allow new services to be incorporated in the future with software upgrades – providing investment protection. Real Time Packet Deduplication As each packet passes through this blade on ingress or egress, it can be compared to all packets previously received through the same port within a configurable time window. If the packet is considered a duplicate of a previously received packet, the packet is dropped and not transmitted through the port. Line Rate Packet Slicing This INTELLAFLEX blade supports packet slicing on all packets. Network administrators may configure each port on the blade to truncate each packet that passes through the port to a preset number of bytes, with a new checksum (CRC) appended to the packet. All packet slicing is performed at Ethernet line rate, selectable either on ingress or egress. Nanosecond-level Time Stamping Each packet can be precisely time stamped to sub-10ns precision on ingress or egress, by universally coordinated time or system time. This feature allows precise reconstruction of packet flow history. Supported timing protocols include GPS, IRIG-B, PTP, and NTP. Timing may be synchronized among many Time Stamping blades and APCON switch chassis, utilizing PPS or IRIG-B. D A T A S H E E T APCON INTELLAFLEX — 36-Port 10G Multi Function Blade Specifications Blade Functionality Packet Deduplication A key feature of APCON’s INTELLAFLEX Multi Function Blade is the ability to perform packet deduplication on any traffic entering any port on the blade. Each succeeding packet is compared to prior packets received. If a packet is deemed to be a duplicate, it is discarded. SPANs 1 5 2 6 7 4 8 9 13 10 14 11 15 12 16 17 21 18 22 19 23 20 24 1 5 2 6 3 7 4 8 9 13 10 14 11 15 12 16 17 21 18 22 19 23 20 24 Duplicate Packets 3 5 7 9 11 4 6 8 10 12 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 23 24 14 16 18 20 22 24 26 28 30 32 34 36 13 15 17 19 21 23 25 27 29 31 33 35 INTELLAFLEX Blade ACI-3032-E36-1 2 4 1 6 3 8 5 10 7 12 9 14 11 PPS/IRIG IN OUT ENTER INTELLAFLEX Blade ACI-3032-E36-1 2 4 1 6 3 8 5 10 7 13 12 9 11 16 15 18 17 20 19 22 21 24 23 6 8 10 12 26 28 25 27 29 31 26 28 30 32 34 36 27 29 31 33 35 23 24 30 32 34 33 35 20 22 24 19 21 23 25 18 20 22 24 26 28 30 32 34 Status B Outer DA (48) Cisco FabricPath Frame Outer SA (48) FP Tag (32) 1 1 2 bits Endnode ID (7:6) 1 1 12 bits 8 bits 16 bits 16 bits 10 bits 6 bits RSVD Monitoring Tool Payload CRC Switch ID Sub Switch ID Port ID Etype Ftag TTL APCON’s Multi Function blade performs protocol stripping on any port, up to 288 1G or 10G ports in an 8RU chassis. Packet Slicing If packet slicing is enabled on a port, packets are sliced at a defined number of bytes to reduce bandwidth load at the monitoring device, or to remove sensitive data from the monitoring stream. A new checksum (CRC) is calculated and appended. Packet slicing is performed at line rate. Header Payload CRC nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn After Payload Header Time Stamp New CRC nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn Second 4 bytes Nanosecond 4 bytes Network-Wide Timing Services The INTELLAFLEX switch chassis offers up to 288 non-blocking 1/10G ports per chassis. With several chassis, you can monitor any number of points on your network with precise and accurate time stamping. When used with an industry-standard latency monitoring tool, the INTELLAFLEX solution allows you to implement complete system-wide measurement and management of latency and timing impacts in real time from a single chassis. Header Payload PTP Grandmaster F1 07:23:05 MTC F1 OK F2 ESC Configurable number of bytes Timing Synchronization By connecting each blade through the front-facing connectors or over the switch backplane, you can synchronize any number of APCON switches to a common time source, whether that source is GPS or a PTP Grandmaster, increasing overall accuracy of time stamping across the complete solution. Chassis 1: Master Time-Source Blade Time Source = Backplane (or Auto) Ref. Time USB Alarm Time Source = Backplane (or Auto) SPANs & Taps 11 INTELLAFLEX Blade ACI-3032-E36-1 UP 10 12 19 14 16 18 13 21 23 24 25 27 29 31 26 28 30 33 35 36 GPS ANT Status 6 8 20 22 32 34 3 5 7 9 11 15 17 19 21 23 25 27 29 31 33 35 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 GPS ANT Status INTELLAFLEX Blade ACI-3032-E36-1 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 Catalyst 2960-S Series SI CONSOLE 2 6 8 3 5 7 9 11 4 6 8 10 12 14 1 3 5 7 10 9 12 11 13 PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 Catalyst 2960-S Series SI INTELLAFLEX Blade ACI-3032-E36-1 MODE I NTELLA P ATCH ® 2 16 20 22 15 17 19 21 23 16 18 20 22 24 15 17 19 21 24 23 25 6 8 3 5 7 9 11 4 6 8 10 10 12 12 PPS/IRIG IN OUT 26 28 32 34 25 27 29 31 33 35 26 28 30 32 34 36 27 30 29 31 33 14 16 20 22 13 15 17 19 21 23 14 16 18 18 20 22 24 24 E Latency Monitoring & Troubleshooting Tools PPS/IRIG IN OUT GPS ANT PPS/IRIG IN OUT GPS ANT PPS/IRIG IN OUT GPS ANT PPS/IRIG IN OUT GPS ANT Chassis 2: Master Time-Source Blade Time Source = IRIG (or Auto) D 36 35 GPS ANT Multi Function 1/10 Gbps Status C Time Source = Backplane (or Auto) Power GPS ANT Multi Function 1/10 Gbps Status B Power 26 28 32 34 25 27 29 31 33 35 26 28 30 30 32 34 36 36 1/10 Gbps Ethernet 4 1 2 Model ACI–3288–XR STAT DPLX SPED INTELLAFLEX Blade ACI-3032-E36-1 GPS ANT Multi Function 1/10 Gbps Status 13 1/10 Gbps Ethernet Catalyst 2960-S Series SI CONSOLE 18 Multi Function 1/10 Gbps Status 1/10 Gbps Ethernet PPS/IRIG IN OUT F Power 14 1/10 Gbps Ethernet CONSOLE STAT DPLX SPED PPS/IRIG IN OUT Power GPS ANT 1/10 Gbps Ethernet 4 1 2 1/10 Gbps Ethernet STAT DPLX SPED MODE GPS ANT 1/10 Gbps Ethernet 1/10 Gbps Ethernet PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 Status 6 3 1/10 Gbps Ethernet INTELLAFLEX Blade ACI-3032-E36-1 G Multi Function 1/10 Gbps Power 4 1 1/10 Gbps Ethernet Catalyst 2960-S Series SI CONSOLE STAT DPLX SPED MODE GPS ANT 2 PPS/IRIG IN OUT MODE 1/10 Gbps Ethernet 1/10 Gbps Ethernet Catalyst 2960-S Series SI CONSOLE STAT DPLX SPED H Multi Function 1/10 Gbps Power MODE PPS/IRIG IN OUT Multi Function 1/10 Gbps Power 4 1 2 PPS/IRIG IN OUT DOWN ENTER INTELLAFLEX Blade ACI-3032-E36-1 17 1/10 Gbps Ethernet CANCEL 15 1/10 Gbps Ethernet 3288-XR S/N: 72020004 Ver: 1 Hit [Enter] for configuration CONSOLE STAT DPLX SPED 13 1/10 Gbps Ethernet 2 9 PPS/IRIG IN OUT 10.1.102.72 / 255.255.0.0 26.7ºc Catalyst 2960-S Series SI 7 1/10 Gbps Ethernet Catalyst 2960-S Series SI CONSOLE STAT DPLX SPED MODE 5 GPS ANT Terminal Network 3 Antenna PPS/IRIG IN OUT Time Service NTP: GPS: PTP: 1 New CRC nn nn nn nn nn nn nn nn nn nn nn nn nn nn Time Source = GPS (or Auto) SYSY RPS CRC (new) 000/DL 6 bits Endnode ID (5:0) Unique Packets After SYSY RPS Payload 36 nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn SYSY RPS SMAC 802.1Q Etype Before Header SYSY RPS DMAC A Before SYSY RPS CRC Power As each packet traverses the port, the exact time of the first byte is recorded, and an 8-byte time stamp is applied between the packet payload and the closing checksum (CRC). The checksum is updated to reflect the new data. SYSY RPS Payload Original CE Fame Packet Aggregator 1/10 Gbps Time Stamping SYSY RPS SMAC 802.1Q Etype Multi Function 1/10 Gbps Status 18 17 16 DMAC C Power 16 15 14 D 36 GPS ANT 14 1/10 Gbps Ethernet 4 Status Power Multi Function 1/10 Gbps Status 1/10 Gbps Ethernet 2 Classical Ethernet Frame Packet Aggregator 1/10 Gbps Power 13 1/10 Gbps Ethernet INTELLAFLEX™ Blade ACI-3030-E36-6 GPS ANT 1/10 Gbps Ethernet L 1/10 Gbps Ethernet CANCE 1/10 Gbps Ethernet 1/10 Gbps Ethernet PPS/IRIG IN OUT 1/10 Gbps Ethernet INTELLAFLEX™ Blade ACI-3030-E36-6 Unnamed S/N: 72020004 Ver: 4 Hit [Enter] for configuration 1/10 Gbps Ethernet 1 2 To tools from APCON with Multi Function Blade 1/10 Gbps Ethernet 10.1.102.72 / 255.255.0.0 26.7ºc Protocols such as VLAN, VNTag, FabricPath, and others are used in various network configurations and encapsulate the Ethernet data to help build highly scalable Layer 2 multipath networks more efficiently. Such networks are particularly suitable for large virtualization deployments, private clouds, and high-performance computing (HPC) environments. However this high level protocol must be removed and the actual classical Ethernet frame must be sent to the monitoring tools so the correct analysis can be accomplished. I/G U/L Even correctly configured SPAN ports may report between one and four copies of a given packet. Duplicate packets can represent as much as 55% of total network traffic from SPANs, multiple capture points, and aggregations. Duplicate packets overload tools and hinder effective network monitoring. Eliminating duplicate packets saves money and enhances network visibility. 3 Protocol Stripping GPS ANT Multi Function 1/10 Gbps Status A Power MODE Preliminary – Specifications Subject to Change Time Source = Backplane (or Auto) Connecting cable carries the PPS pulse APCON INTELLAFLEX — 36-Port 10G Multi Function Blade Specifications Supported Features, Certifications, Hardware, Accessories ■ SFP+ Support ■ Environmental Ranges • 10GBASE-LR • 10GBASE-SR • • • • • • ■ Supported Optical Fiber Standards • • • • Multimode 50μm Multimode 62.5μm Singlemode 9μm 1310nm Singlemode 9μm 1550nm Operating temperature: 32° to 113° F (0° to 45° C) Storage temperature: -40° to 158° F (-40° to 70° C) Operating altitude: up to 10,000 ft (3,048 m) Non-operating altitude: up to 16,000 ft (4,877 m) Relative humidity operating: 10% to 85% (noncondensing) Relative humidity non-operating: 0% to 95% (noncondensing) ■ RoHS Compliance ■ Authentication and Control Interfaces • RoHS-compliant •TACACS+ •LDAP • RADIUS •SNMPv3 •SSH •HTTPS/SSL •WEBXR GUI and WEBX GUI • TITAN EP Multi-Switch Management ■ Safety and Emissions Certifications • UL/CB certified • EMC/EMI tested and certified Common Use Cases Monitoring for Performance Management Any network monitoring system must deal with duplicate packets. In large scale and multi-site deployments you can eliminate duplicate packets by utilizing APCON’s Multi Function Blade featuring packet deduplication, packet slicing, time stamping, aggregation, multicast, Multi Stage Filtering, and load balancing. In addition, the ability to centralize, increase utilization, and re-use expensive analysis tools can result in 77% cost savings over traditional deployment schemes. Deduplication Multi Stage Filtering on Ingress 10.1.102.72 / 255.255.0.0 26.7ºc 7 9 11 6 8 10 12 3 5 7 9 11 13 15 17 4 6 8 10 12 14 16 18 5 7 9 11 13 15 17 19 5 INTELLAFLEX Blade ACI-3032-E36-1 25 33 35 32 34 36 29 31 33 35 28 30 32 34 36 27 29 31 33 35 GPS ANT Status Status Status 18 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 GPS ANT 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 GPS ANT 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 8 5 10 12 7 9 11 6 8 10 12 3 5 7 9 11 4 6 8 10 12 14 20 22 13 15 17 19 14 16 16 18 18 24 21 23 20 22 24 13 15 17 19 21 23 14 16 18 20 22 24 GPS ANT Latency Monitoring in Data Center with GPS or PTP Time Synchronization PTP Grandmaster F1 07:23:05 MTC F1 OK F2 ESC Ref. Time Terminal Time Service NTP: GPS: PTP: Network Alarm USB D Multi Function 1/10 Gbps Status C Power 26 32 34 25 27 29 31 33 35 26 28 30 32 34 36 25 27 29 31 33 35 26 28 28 30 30 32 34 36 36 1/10 Gbps Ethernet 6 3 4 1/10 Gbps Ethernet 4 PROGRAM CONFIG Power 4 1 1 E Unique, Relevant Packets Multi Function 1/10 Gbps Status 2 1 Multi Function 1/10 Gbps Status 4 1 2 DISPLAY RF LEVEL ----------CH: 2 Fv: 55.25MHz F Power 2 2 G Multi Function 1/10 Gbps Power 16 2 Tools H Multi Function 1/10 Gbps Power GPS ANT Core and co-located data centers choose APCON INTELLAFLEX for both latency monitoring and general purpose monitoring concentrated in a single scalable chassis. Data centers combine time stamping ports for latency monitoring inputs with INTELLAFLEX ports for latency monitoring outputs and general purpose monitoring activities. This INTELLAFLEX Multi Function Blade allows network engineers to facilitate analysis of traffic delays to diagnose physical or application performance issues utilizing latency and performance measurement tools. Multi Function 1/10 Gbps Power GPS ANT 14 1/10 Gbps Ethernet INTELLAFLEX Blade ACI-3032-E36-1 31 30 27 12 PPS/IRIG IN OUT CONSOLE STAT DPLX SPED 23 1/10 Gbps Ethernet INTELLAFLEX Blade ACI-3032-E36-1 Catalyst 2960-S Series SI SYSY RPS 29 28 10 PPS/IRIG IN OUT MODE 27 25 26 1/10 Gbps Ethernet INTELLAFLEX Blade ACI-3032-E36-1 Catalyst 2960-S Series SI 25 26 8 CONSOLE STAT DPLX SPED 21 1/10 Gbps Ethernet STAT DPLX SPED 23 24 6 CONSOLE MODE 24 22 4 PPS/IRIG IN OUT Catalyst 2960-S Series SI 23 22 21 1/10 Gbps Ethernet STAT DPLX SPED 21 19 20 2 PPS/IRIG IN OUT MODE 19 20 1/10 Gbps Ethernet CONSOLE INTELLAFLEX Blade ACI-3032-E36-1 17 18 1/10 Gbps Ethernet Catalyst 2960-S Series SI SYSY RPS 3 PPS/IRIG IN OUT Inputs with Duplicate Packets 15 16 1/10 Gbps Ethernet MODE SYSY RPS 1 DOWN ENTER 1/10 Gbps Ethernet CONSOLE 13 14 1/10 Gbps Ethernet UP INTELLAFLEX Blade ACI-3032-E36-1 STAT DPLX SPED SYSY RPS 1 2 PPS/IRIG IN OUT Hit [Enter] for configuration Catalyst 2960-S Series SI SYSY RPS INTELLAFLEX Blade ACI-3032-E36-1 3288-XR S/N: 72020004 Ver: 1 CANCEL 1/10 Gbps Ethernet 3 4 1/10 Gbps Ethernet 1 2 PPS/IRIG IN OUT Data Center SPANs and Taps Monitoring for Latency Measurement GPS ANT Multi Function 1/10 Gbps Status B Power MODE I NTELLA P ATCH ® PPS/IRIG IN OUT STAT DPLX SPED INTELLAFLEX Blade ACI-3032-E36-1 1/10 Gbps Ethernet CONSOLE 1/10 Gbps Ethernet Model ACI–3288–XR Catalyst 2960-S Series SI SYSY RPS MODE GPS ANT Multi Function 1/10 Gbps Status A Power 1 7 9 11 INTELLAFLEX Blade ACI-3032-E36-1 2 4 6 8 1 3 5 7 9 11 2 4 6 8 10 12 1 3 5 7 10 9 12 11 13 PPS/IRIG IN OUT Hit [Enter] for configuration UP DOWN ENTER INTELLAFLEX Blade ACI-3032-E36-1 33 35 18 24 Status 20 22 15 17 19 21 23 16 18 20 22 24 15 17 19 21 23 26 28 32 34 25 27 29 31 33 35 26 25 28 30 32 34 36 27 30 29 31 33 35 GPS ANT Status Status 10 12 14 16 18 20 22 24 26 28 30 32 34 36 9 11 13 15 17 19 21 23 25 27 29 31 33 35 1/10 Gbps Ethernet GPS ANT Status 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 10 12 1/10 Gbps Ethernet 8 5 7 9 11 6 8 10 12 3 5 7 9 11 4 6 8 10 12 14 16 13 5 7 9 11 13 18 24 22 17 19 21 23 16 18 20 22 24 15 17 19 21 23 16 18 20 22 24 15 17 19 21 23 25 4 6 8 10 12 26 32 34 25 27 29 31 33 35 26 28 30 32 34 36 25 27 29 31 33 35 26 28 28 30 30 32 34 36 36 27 29 31 33 35 GPS ANT 14 16 18 20 22 24 Multi Function 1/10 Gbps Status C Power GPS ANT Multi Function 1/10 Gbps Status B Power 1/10 Gbps Ethernet 1/10 Gbps Ethernet 2 D Power 20 15 13 14 1/10 Gbps Ethernet 3 2-4 Input Ports E Multi Function 1/10 Gbps Status 14 1/10 Gbps Ethernet 1 PPS/IRIG IN OUT GPS ANT 1/10 Gbps Ethernet 6 3 4 1/10 Gbps Ethernet 4 1 F Multi Function 1/10 Gbps Power 2 1 G Multi Function 1/10 Gbps Power 8 2 Multi Function 1/10 Gbps Power GPS ANT 7 2 H 36 6 2 Multi Function 1/10 Gbps Power 16 13 5 Model ACI–3288–XR INTELLAFLEX Blade ACI-3032-E36-1 31 GPS ANT 14 1/10 Gbps Ethernet I NTELLA P ATCH ® 29 3 PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 27 4 PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 25 14 1/10 Gbps Ethernet INTELLAFLEX Blade ACI-3032-E36-1 23 1 PPS/IRIG IN OUT Remaining Data Center Server Farm and DMZ Monitoring 21 2 PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 19 1/10 Gbps Ethernet PPS/IRIG IN OUT INTELLAFLEX Blade ACI-3032-E36-1 17 1/10 Gbps Ethernet 3288-XR S/N: 72020004 Ver: 1 15 1/10 Gbps Ethernet 10.1.102.72 / 255.255.0.0 26.7ºc CANCEL 13 1/10 Gbps Ethernet Preliminary – Specifications Subject to Change 5 PPS/IRIG IN OUT 1/10 Gbps Ethernet Packet slicing with the INTELLAFLEX Multi Function Blade can remove confidential information to comply with regulatory requirements, and leave the packet headers intact. Legislation such as HIPAA, PCI and others demand data confidentiality, and stripping sensitive payload data from packets before they go to MAC IP TCP Payload monitoring tools ensures that any sensitive data is not stored outside secure boundaries. Packet slicing increases tool utilization while reducing data volume, creating MAC IP UDP TCP Payload greater efficiency, security and decreases costs. ~12-20 SPAN/TAP Monitoring Inputs 3 1/10 Gbps Ethernet Monitoring for Security Management Latency Monitoring & Troubleshooting Tools PTP Client Low Latency GPS ANT Multi Function 1/10 Gbps Status A Power 26 28 30 32 34 36 Monitoring & Troubleshooting Tools APCON INTELLAFLEX — 36-Port 10G Multi Function Blade Specifications Blade Specifications* Description • Multi Function Blade – Thirty-six 1G/10 Gbps Ethernet ports Blade Power • 320 Watts per blade Protocols • 1G/10Gbps Ethernet Optical Transceivers • Single mode to multimode Rate Conversion • Yes Deduplication Time Window • 4 – 100 milliseconds based on Maximum Transmission Unit (MTU) size Packet Slicing • Configurable byte range: 64 to 9600 Physical Interfaces • SFP+ (36) SFP+ Ports Support • MMF 10GBASE-SR/SW, SMF 10GBASE-LR/LW Backplane Interfaces • 36 × 10GBASE-R Timing Services • GPS, IRIG-B, PTP, NTP Synchronization • PPS-IN, PPS-OUT Services and Manageability • CLI • Web interface • LCD management • SNMP: v1, v2, v3 • RADIUS • LDAP, TACACS+ • SSHv2 • HTTP/HTTPS * Specifications subject to change Chassis Compatibility Chassis Part Number Description • ACI-3144-XR • Four blade • ACI-3288-XR • Eight blade (XR designate extended capacity chassis) Ordering Information Model # • ACI-3032-E36-1 • INTELLAFLEX Multi Function Blade APCON, Inc. is a pioneer in the field of switching technology and is globally recognized as the leading provider of packet aggregation switching solutions and Taps. Organizations in over 40 countries currently depend on APCON solutions in their network infrastructures. Customers include Fortune 500 companies, and networking and computer OEMs, as well as government and military organizations, telecommunication and service providers, financial services firms, and medical companies. APCON, Inc. ▪ 9255 SW Pioneer Court ▪ Wilsonville, OR 97070 ▪ 503–682–4050 ▪ Toll Free: 800–624–6808 ▪ sales@apcon.com ▪ apcon.com @APCON ▪ company/APCON ▪ APCON is an Equal Opportunity Employer – MFDV © 2014 APCON, Inc. All Rights Reserved. 14036-R7-0614