R
SPECIFIER PRODUCT INFORMATION
N
CAT. NO. 3800 EQUIPMENT-CABINET
SURGE PROTECTIVE DEVICES
UL 1449 Transient Voltage Surge Suppressors
APPLICATION
Cat. No. 3800 devices are designed for mounting in standard equipment cabinets where transient voltage surge suppression is desired for the enclosed equipment. The MOV-based circuit design of each
module provides Normal Mode and Common Mode protection for line to neutral, line to ground and neutral to ground. The 3800 modules feature compact “black box” styling. Three modules are available:
DIN-rail mounting, terminal block wiring or wire leads.
STANDARDS SPECIFICATIONS
The Cat No. 3800 Equipment-Cabinet Surge Protective Devices (SPD) are designed for use on 120V
single-phase AC power lines. The 3800-OWM, DIN and OEM modules feature a green LED monitor to
indicate loss of protection. (Light out indicates that protection is lost, replace unit.) In the event protection is lost, unit will continue to provide power to connected loads. These devices are UL Recognized
Component TVSS 1449 Standard. The Cat. No. 3800 is backed by Leviton’s limited five year warranty.
GENERAL DATA FOR CAT. NO. 3800
Date of Issue: October, 1996
Specification
Data Applicable To All
Rated line voltage
120V (VRMS)
Maximum continuous
operating voltage
135V
Max. single-pulse transient current
(8x20 µs, Amps peak)
13000A (L-N)
6500A (L-G)
6500A (N-G)
Rated single-pulse transient energy
(10x1000 µs, impulse)
280 Joules
Noise rejection @ 5kHz-5MHz
-35 dB
61
N
R
SPECIFIER PRODUCT INFORMATION
62
CLAMPING PERFORMANCE
Specification
3800-OWM, DIN
3800-OEM*
UL Standard 1449
L-N: 500V Peak
L-N: 600 Peak
Permanently-wired
L-G: 500V Peak
L-G: 600 Peak
Test (8x20 µs, 3000A)
N-G: 500V Peak
N-G: 600 Peak
*3800-OEM rating tested with 6” lead length
PHYSICAL SPECIFICATIONS
Operating Temperature Range:
-10°C to 60°C
Storage Temperature Range:
-20°C to 85°C
Wiring Means:
Nos. 3800-DIN, 3800-OWM
Terminal block accepts 22 AWG to 12 AWG conductors
No. 3800-OEM
#16 AWG leads, 6” long, stripped 1/2”
Agency Approvals
All devices UL Recognized Component TVSS
1449 Standard, CSA Certified
SUPPRESSION MODULES FOR EQUIPMENT CABINETS
Cat. No.
Description
3800-DIN
For DIN rail mounting, with terminal block
3800-OWM
Screw mounting, with terminal block
3800-OEM
Screw mounting, with pigtail wire leads
1.66 (42.16mm)
0.73
(18.54mm)
0.85
(21.59mm)
0.83
(21.08mm)
3.28 (83.31mm)
TERMINAL BLOCK
NOTE: WIRES ENTER
FROM THIS SIDE
3.78 (96.01mm)
LIGHT ON
SURGE
PROTECTED
2.69 (68.33mm)
1.41 (35.81mm)
DIN RAIL CLIP
0.625
(15.88mm)
Cat. No. 3800-DIN
©1996 Leviton Manufacturing Co., Inc. All Rights Reserved
C-481/J6