KEWAUNEE
®
ScientificCorporation
H08
Supreme Air Fume Hood
ADA Bench Hood with Vertical Rising Sash
(indicate fittings/fixtures required)
(indicate fittings/fixtures required)
[Alarm Location 1]
NOTE: ADA Hoods Require
W-4285 Ball Valve Fittings
120VAC GFI Duplex
Gravity Sash Stop
@14" above deflector vane
Plugged [Cold Water]
[Air] Plugged
Plugged [Vacuum]
[Gas] Plugged
Lt. Switch /120VAC GFI Receptacle
[Fan Switch] Blank Face Plate
Liner Option: (pick one only)
qK
qG
qS
qT
By-Pass Option: (pick one only)
ADA guidelines require
30" minimum
for wheelchair access
KMER
Kemglass
Type 304 St. Steel
Phenolic Resin
q - Open By-Pass
q B Restricted By-Pass
(restricted to 20%
of face opening)
(front panel louvers omitted)
Length: (pick one only)
q 48" q 60" q 72"
Pre-piping: (pick one if required)
q Pre-pipe Up
q Pre-pipe Down
Add On Options: (indicate options required)
Interior Baffle Arrangement Options: (pick one only)
Sash Handle Options: (pick one only)
Standard Fixed Baffle
qA
Adjustable Baffle
qC
Single-Point Adjustable Baffles
Standard Painted Metal Sash Handle
qQ
Stainless Steel Sash Handle
Distillation Rack Option: (pick if required)
qD
Distillation Rack
Fire Extinguisher Option: (pick if required)
qE
Fire Extinguisher
Electric and Plumbing Options: (pick all required)
qH
Pre-Wired to Top of Hood
Safety Shield Option: (pick if required)
qI
Safety Shield
Interior Lighting Options: (pick one only)
Standard
qJ
qK
qL
Fluorescent Light (T-5 Ballast)
Fluorescent Light (T-8 Ballast)
Vapor Proof Light (Incandescent)
Explosion Proof Light (Incandescent)
Lower Deflector Vane Options: (pick one only)
Standard Painted Lower Deflector Vane
qO
Stainless Steel Deflector Vane
Top Front Panel Options: (pick one only)
qT
Chevron Grille (Open By-Pass Only)
qV
Vision Panel
Fume Hood Alarm Options: (pick one if required)
qW
Air Alert 300 Alarm (location 1)
qM
Air Alert 600 Alarm (location 1)
Sash Frame and Glass Options: (pick one only)
Standard
q1
q2
q3
q4
q5
Frameless Laminated Safety Glass Sash
Frameless Tempered Glass Sash
Framed Laminated Safety Glass Sash
Framed Tempered Glass Sash
Stainless Steel Safety Glass Sash
Stainless Steel Tempered Glass Sash
Miscellaneous Options: (pick all required)
q6
q7
q8
Tissue Screen
Stainless Steel Duct Collar
Move Gravity Sash Stop
(from 14" above deflector to 18" above deflector )
LINER
H08 54
PROJECT NAME:
10/13
LENGTH BY-PASS
ADD-ON OPTIONS
COLOR
ITEM NO.
00__________________
QUANTITY
page 1 of 2
KEWAUNEE
®
ScientificCorporation
H08
Supreme Air Fume Hood
ADA Bench Hood with Vertical Rising Sash
Plan of Work Top
Indicate cutouts required by noting cupsink
part number or size and/or hole type and
size at desired location:
Alternate Cupsink
Location
Example:
Alternate Cupsink
Location
The example below calls for two
491 cupsink cutouts in the front.
31"
Standard
ADA Cupsink
Location
Alternate Cupsink
Location
Alternate
Cupsink
Location
Alternate Cupsink
Location
Stanard
Alternate
Cupsink
Location
ADA Cupsink
491Location
491
47 3/4 " – 59 3/4 " – 71 3/4 "
For sink or steambath cutout:
Sketch in size and location required.
Work Top Material
q Black Kemresin
q Type 304 Stainless Steel q Type 316 Stainless Steel
If no cutout is marked, work top will ship
with 3"x6" cupsink cutout in left front
corner. If no cutout is required, cross out
standard cupsink location. (Cupsink is
welded in stainless steel work tops.)
Overall Hood
Length
4'-0" / 48"
5'-0" / 60"
6'-0" / 72"
Width
40"
52"
64"
Sash Opening
Height
Total Ft.2
14"
4.7
14"
6.1
14"
7.6
*
Total CFM and Static Pressure
S.P. 100 FPM
S.P.
120 FPM
0.05"
470
0.10"
570
0.10"
610
0.10"
740
0.10"
760
0.15"
910
80 FPM
380
490
600
S.P.
0.15"
0.15"
0.20"
* Includes By-Pass opening.
• CFM requirements shown above are for Open By-Pass hoods with sash stop at 14". CFM requirements for sash fully open are same as H05.
• Static pressures shown are for the pressure drop through the hoods only. The total pressure drop through the hood and the duct system
must be calculated to select the proper exhaust fan.
Rough-In for 4' – 5' – 6' Hoods
Vertical Section
Pipe Space Below Work Top
Plumbing Access (both sides)
EQ
36"
EQ
8"
2"
9 1/2"
1"
1 1/2 "
7"
20 1/2"
22"
36"
Rough-in may vary depending on hood base unit locations.
Contact your Kewaunee sales representative for more information.
54"
86 3/4 "
29" Sash Opening
14" to Sash Stop
48"– 60"– 72"
93 3/4 " Clearance – Sash Up
11 15/16 " O.D.
Exhaust Collar
5"
5"
71"
25 1/2 "
5"
1 1/4 "
34" (max)
ADA guidelines
require 30"
minimum for
wheelchair
clearance.
22"
page 2 of 2
8"
10/13