EKT 357 Digital Communications
SEM II 2015/2016
Mini Project Guidelines
[1] Mini project report format is based on IEEE template.
[2] The sequence in which the mini project report should be arranged and
bound is as follows:
a. Mini Project Title.
b. Abstract.
c. Introduction.
d. Content
e. Conclusion.
f. References: Please provide these in a standard IEEE format (i.e. all
the same throughout the list!), and include authors, year, title of paper,
journal, volume, and first and last page numbers. You may use
numbers throughout the text for your references, but please include the
full reference in the reference list. 10 to 20 references should be
adequate.
[3] The mini project report should normally not exceed 15 pages (excluding
the appendix, if any), and should not be shorter than 5 pages.
[4] Please make sure that sufficient detail is provided in the legend for the
reader to understand the figure or table fully without reference to the text.
Figure legends go at the bottom of the figure. Table legends go at the top of
the table.
Your mini project should have the following:
• States all assumptions made.
• Shows all related expressions, equations and calculations.
• Include all the diagrams, mathematical modelling and work flows.
• Appropriate examples and simulation outputs.
Report submission : May 13th, 2016
Group presentation: May 13th, 2016 – maximum 15 slides
All softcopy reports compiled by Class Representative in a CD