AIR-COOLED CONDENSING UNITS with BITZER COMPRESSORS

advertisement
bn-CUBZTB
April 2011
air-cooled condensing units
with Bitzer Compressors
Technical Guide
Table of Contents
Floating Tube™ Coil
Options
Limitizer®
Bitzer Compressor
Features and Benefits
3
4-5
6
7-8
Horizontal Air Discharge Condensing Units 4 to 13 HP
Standard and Optional Features
9
Nomenclature
9
Performance Data
Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 10
10
Electrical Data
Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 11
11
Specifications and Dimensional Data
Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 12
12
Vertical Air Discharge Condensing Units 13 to 50 HP, Single Compressor
Standard and Optional Features
13
Nomenclature
13
Performance Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
14
15
Electrical Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
16
16
Specifications and Dimensional Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
17
17
Vertical Air Discharge Condensing Units 26 to 100 HP, Dual Compressor
Standard and Optional Features
18
Nomenclature
18
Performance Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
19
20
Electrical Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
21
21
Specifications and Dimensional Data
Medium Temperature - R-404A/R-507
Low Temperature - R-404A/R-507
22
22
2
© 2011 Heatcraft Refrigeration Products, LLC
Single And Dual Compressor
Condensing Units
Feature Our Floating Tube™ Coil Design
Expanded (Locked) Auxiliary Tubes:
These tubes support the coil with fins and refrigerant
carrying tubes. They do not carry refrigerant and are
tightly fitted on end supports and center supports.
Free Floating Circuited Coil Tubes:
These tubes carry refrigerant and never touch
and sheet metal (end supports and center
supports).
All units include a limited
Five Year Warranty
against condenser leaks at tube sheets and
center supports.
All condensers use the Floating Tube™ coil design to eliminate refrigerant leaks at the tube
sheets. Additional tubes are added to the condenser coil. These tubes are expanded into the
aluminum fins and condenser tube sheets. These anchor tubes support the weight of the coil,
but are not a part of the refrigerant circuit.
The tubes in the refrigerant circuit are expanded into the fins, but “float” through oversized
holes in the tube sheets. Tube sheet leaks are virtually eliminated, since the tubes which carry
refrigerant never come in contact with the tube sheet.
3
Options
E Solutions branded products and options are designed to exceed current energy and environmental
standards. It is our commitment in environmental innovation to dedicate ourselves by delivering energy
efficient eco-conscious choices. Products included in the E Solutions portfolio reduce costs, improve
bottom lines, and enhance equipment performance and service life.
The Beacon II™ Refrigeration System with Smart Defrost, and the factory-installed
Smart Defrost Kit™ are E Solutions options that will optimize your savings and increase
energy efficiency.
Available with Beacon II™
™
Beacon II™ is the next generation of Bohn’s patented, preassembled, factory installed
refrigeration system featuring an integrated microcomputer-based electronic control
board. The Beacon II™ systems come completely factory installed, wired and tested
saving you time and money.
Beacon II™ offers:
•
•
•
•
•
•
Complete factory installation, wiring and testing which saves time and money
Simple field electrical connections and 24 volt wiring between condensing and evaporator units
Preset factory superheat allowing the system to run more efficiently and reducing future adjustments
Monitors and controls box temperature, evaporator superheat, condenser fan cycling on two fan units,
system status and defrost from outside the box
Monitor and make system changes remotely via modem and exclusive Beacon II™ Smart II software
Data logging capabilities with Smart Controller
Beacon II™ Smart Controller
Beacon II™ Smart Controller is an optional system monitoring and
programming control device. It allows for adjustments to be made at the
push of a button from a conveniently mounted location. The Beacon II™ Smart
Controller also allows you to monitor and make changes to the refrigeration
system via modem connection from anywhere in the world. The Beacon II™ has
been updated to allow the user to make even more precise adjustments than the original Beacon’s Smart Controller. One
Smart Controller can program and control up to four separate condensing units with up to four evaporators on each system.
That’s more control in your hands!
4
Beacon II™ Smart II Software
Beacon II™ Smart II Software makes it easy to adjust and monitor one or more
refrigeration systems as well as capture minute by minute system conditions. This
Windows-based software allows you to connect to the Beacon II™ Smart Controller
from anywhere in the world to monitor the systems, make adjustments and log
minute by minute system conditions. This data logging capability is critical in the
food service industry.
Beacon II™ Smart Defrost
The Beacon II™ Smart Defrost, available only on the Beacon II™ Smart
Controller, enables the Beacon II™ system to sense frost accumulation
and initiates defrost only when it is necessary. To begin, preset defrost
times using the Beacon II™ Smart Controller. At each scheduled defrost
time, Smart Defrost checks system performance to see if a defrost
is necessary. If not, it simply does not defrost, waiting until the next
scheduled defrost time.
Smart Defrost Kit™
The factory installed Smart Defrost Kit (SDK) skips unnecessary defrosts in commercial,
electric defrost walk-in refrigeration systems saving energy, reducing costs and ultimately
improving product integrity. The SDK is available as a factory-installed option on all
condensing units.
5
LIMITIZER®
The Need For Head Pressure Control
Refrigeration condensing units must efficiently perform at varying
ambient conditions. A properly sized unit will adequately perform
at even the highest summer ambient temperatures. However, in
situations where the system must operate the majority of the time at
less than design temperature, a means of providing adequate head
pressure for refrigerant flow is desirable.
The Bohn Limitizer® System
The Limitizer® system is a factory assembled system utilizing a Limitizer®
control to maintain a constant head pressure at the air cooled
condensing unit during all climatic conditions when the ambient
temperature drops below 75°F (typical).
When the ambient is above 75°F, the condenser pressure is above
the Limitizer® valve setting and therefore, the valve remains in the
full open position.
As the temperature drops below 75°F, the pressure at the condenser
also drops below the setting of the Limitizer® valve. The Limitizer®
valve, sensing the reduction in condensing pressure, modulates
toward the closed position, thus restricting the flow of liquid from the
condenser. The liquid backs up into the condenser and floods a portion
of the tubes, thus reducing the overall capacity of the condenser. The
Limitizer® valve will continue to flood the condenser until the pressure
setting has been reached, thus providing proper head pressure at all
ambient temperatures.
6
While the condenser floods, a second line pressurizes the receiver
through another valve. Therefore, the refrigerant flow from the
condenser to the receiver modulates with conditions. However, the
bypass from the discharge line maintains a minimum receiver pressure.
These valves are adjustable and the minimum receiver pressure may
be reset higher or lower depending upon application situations of a
particular job. The Limitizer® system uses this two-valve,
adjustable design.
Bitzer Compressors
Features and Benefits
Bitzer is the world’s largest manufacturer of semi-hermetic refrigeration compressors
over 3 HP. In business since 1934, Bitzer has manufacturing plants in Germany,
Brazil, Portugal, China and the United States and operates in over 100 countries
around the world. Bitzer’s Georgia plant manufactures a complete range of
semi-hermetic compressors from 3 to 50 HP. Bitzer provides aftermarket support
through wholesalers and also provides 24-hour replacement service from its seven
distribution warehouses located across the U.S.
Bitzer Offers:
•
•
•
•
•
•
•
1-Year Warranty
Unloader Heads Standard on All 4 & 6-cylinder Models
Dual Voltage Control Modules on All Models
Dual Voltage Compressors (6 to 50 HP)
Lowest Sound Levels in their Class (Built-in Mufflers)
Superior Lubrication and Low Oil Circulation Rates
German Engineering / Built in America
Bitzer Standard Execution
POE Oil Charge
Octagon
4C Models
4B & 6B
Models
√
√
Protective Dry-Nitrogen Charge
√
√
Suction & Discharge Service Valves
√
√
Dual Voltage INT Protection Modules
√
√
Terminal Box Enclosure Class IP65
√
√
Unloader Heads
√
√
Patented Internal Mufflers
√
√
Centrifugal Oil System
√
√
Conventional Oil Pump
√
√
4C Models
4B & 6B
Bitzer Options
Mounting Hardware (Spring Kits)
√
√
Hard Mount Kits
√
√
Optical Oil Sensor
√
√
Crankcase Heaters
√
√
Unloader Stems / Coils
√
√
Head Fans and Brackets
√
√
Delta P II Differential Oil Pres. Switch
√
√
Bitzer Quiet!!!
Bitzer compressors are famous for their low sound
levels. We change capacities within a frame size by
changing our bore diameters rather than the length
of the piston strokes. This gives our compressors an
unsurpassed balance and precision that translates
to low decibels. In addition, Bitzer compressors
have a muffler built into each head (see photo) that
eliminates pulsations and reduces the sound levels
even further.
7
Bitzer Compressors
Features and Benefits
Octagon® 4C Models
Bitzer Octagon 4C Models are rated from 3 to 20 HP. This rugged, compact
series utilizes wear resistant drive gear with PTFE coated bearings for especially
low friction, aluminum pistons of optimized geometry, connecting rods with
eccentric straps and generously dimensioned bearing surfaces. Bitzer’s centrifugal
lubrication system eliminates the need for an oil pump and provides optimum oil
supply to the compressor even under extreme operating conditions.
Centrifugal Lubrication
The centrifugal lubrication design employs a solid metal disc
mounted to the crankshaft (see cut-away) that distributes
oil into a reservoir at the end of the shaft. The oil then flows
through the shaft to the bearing surfaces.
Bitzer offers an optional Optical Oil Sensor (See OLC-K1 photo
below) that mounts to the outer cover of the compressor
and monitors oil level by means of an infrared light.
OLC-K1 Operating Principle
The OLC-K1 sensing device shines an infrared light into
the oil reservoir. If oil is present, the light is absorbed
and the compressor runs normally. If no oil is present,
the light reflects on the sensor, and the compressor
shuts off.
Bitzer 4B & 6B Models
Bitzer 4B through 6B Models are rated from 13 to 50
HP. This series features surface hardened crank shafts,
low friction bearings, aluminum pistons, hard chrome
plated piston rings and special wrist pin bearings.
The 4B & 6B models have a sealed main bearing and
generously sized oil pump. Our patented oil return
system ensures complete lubrication while reducing oil
circulation into the system. Efficient capacity control
is provided by unloader banks that can significantly
reduce energy consumption.
8
Horizontal Air Discharge Condensing Units 4 to 13 HP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Floating Tube™ coil design
Rifled copper condenser tubing
Designed for use with R-404A, R-507
Prebent copper tubes minimize welded joints on
internal piping
Fixed high and adjustable low pressure controls.
Oil safety control
Head pressure control valve
Bitzer compressors with POE oil
Spring mounted compressor with suction and discharge
vibration eliminators
Crankcase heater
Thermally protected, permanently lubricated ball bearing
condenser fan motors
Separate subcooling circuit in condenser for added capacity
and vapor-free liquid
Pressure relief valve on receiver
Sealed liquid line filter drier and sight glass
Electrical controls, including compressor contactor and
optional defrost control, are located in easily accessible control
box with a hinged cover
Service Mate™ module to assist troubleshooting
Pumpdown Switch
Cabinet is constructed from prepainted galvanized steel
Base valve and high & low pressure taps on outside
of unit
Vertical receivers
Horizontal Discharge
Standard and Optional Features
Factory-Installed Options
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Oversized receiver
Replaceable core liquid filter drier
Liquid line solenoid valve
Suction filter
Replaceable core suction filter
Suction accumulator
Oil separator
Air defrost timer
Electric defrost kits, including timer, evaporator fan contactor
with fusing, defrost heater contactor(s), lockout relay and
terminal strip
Fusing for defrost kits
Evaporator holdout relays for systems with multiple electric
defrost evaporators
Low ambient kit with heated and insulated receiver with
time delay
Fused disconnect switch
Non-fused disconnect switch
Phase-loss monitor
Manual-reset high pressure switch
Anti-short cycle timer
Compressor circuit breakers
Condenser fan cycling
Coated condenser coils
Copper finned coil
Beacon II™ compatible
Hail guards (shipped loose)
Compressor unloading
NEMA contactors
12" extended legs for snowbelt region (shipped loose)
Slanted louver for snowbelt regions (shipped loose)
Dual pressure control
Nomenclature
B
B
T
0000
L
6
C
Brand
Compressor
Application
Horsepower
Temp. Range
Refrigerant
Voltage
B = Bohn
B = Bitzer
0401 - 4
0551 - 5
0601 - 6
0611 -6
0751 - 7.5
0901 - 9
1001 - 10
1201 - 12
1301 - 13
M = Med. Temp.
L = Low Temp.
6 = R-404A,
R-507
T = Outdoor
N = Indoor
S = Beacon II™
C = 208-230/3/60
D = 460/3/60
E = 575/3/60
9
Performance Data
Medium Temperature R-404A/R-507
3 - 22
Horizontal
HP Condensing
Discharge
Units
Unit Model
Number
Compressor
Model
BB*0551M6
4C0969SH
BB*0751M6
4C1145SH
BB*0901M6
4C1385SH
BB*1001M6
4C1480PH
Suction Temp.
°F
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
Low Temperature R-404A/R-507
Unit Model
Number
Compressor
Model
BB*0401L6
4C0969SL
BB*0551L6
4C1145SL
BB*0601L6
4C1385SL
BB*0611L6
4C1480PL
BB*0751L6
4C1761PL
BB*1001L6
4C2067PL
BB*1201L6
4C2397PL
BB*1301L6
4B2707PL
Suction Temp.
°F
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
*= T for Outdoors, N for Indoors, S for Beacon II™
Consult factory on all models for applications above 110°F ambient.
10
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
89700
75460
68740
62260
56190
45520
105280
88720
80750
72780
65640
53140
129090
108780
99120
89850
81200
65960
137470
115200
104860
94930
85670
69300
85620
72064
65580
59360
53510
43270
100690
84739
76660
69360
62500
50500
124130
101623
94750
85870
77500
62760
131010
107509
100040
90550
81560
65840
81720
68710
62440
56460
50870
41170
95530
80270
72960
65960
59380
47880
118700
99390
90440
81860
73800
59840
125080
105430
95260
86090
77450
62560
74280
62010
56230
50730
45720
36550
86960
72380
65640
59210
53160
42700
107220
90050
81730
76750
66340
53950
113750
94630
85740
77130
69510
55590
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
35200
27690
24440
21520
17090
15030
42930
33890
29880
26310
20960
18450
52890
41590
36690
32320
25910
22910
56010
43740
38540
33870
26730
23080
68040
53710
47320
41590
32760
28200
78200
61470
54150
47560
37620
32550
93390
74920
64440
56560
44620
38400
105360
83410
73740
65040
51830
45050
33380
26222
23040
20210
16000
14090
40770
32073
28200
24770
19650
17320
50250
39334
34580
30410
24260
21500
52610
41241
36230
31750
24980
21650
64570
50780
44580
39080
30720
26530
74200
58050
51030
44700
35240
30500
88580
69208
60680
53090
41750
36060
100530
79221
69890
61530
48880
42600
31560
24690
21620
18930
14930
13200
38600
30230
26510
23230
18370
16240
47530
37070
32480
28510
22630
20090
49660
38770
33910
29680
23280
20230
61090
47800
41840
36600
28700
24910
70160
54740
47940
41880
32860
28620
83830
65150
56890
49680
38850
33630
95590
75110
66030
58040
45950
40250
28020
21680
18870
16460
12820
11330
34290
26620
23190
20270
15830
14010
42230
32610
28460
24810
19540
17370
43790
33850
29460
25640
19980
17430
54180
41660
36480
31870
24750
21590
63210
48110
41820
36370
28310
24710
74420
57070
49580
43080
33170
28760
85790
66870
58590
51230
40350
35390
Electrical Data
Voltage
Supply ^
Unit Model
Number
Compressor
Model
BB*0551M6C
BB*0551M6D
BB*0551M6E
BB*0751M6C
BB*0751M6D
BB*0751M6E
BB*0911M6C
BB*0911M6D
BB*0911M6E
BB*1001M6C
BB*1001M6D
BB*1001M6E
4C0969SH
4C0969SH
4C0969SH
4C1145SH
4C1145SH
4C1145SH
4C1385SH
4C1385SH
4C1385SH
4C1480PH
4C1480PH
4C1480PH
Condenser
Fan Motors
Compressor
Beacon II™ or
Air Defrost
60 Hz
RLA
LRA
Qty.
HP
FLA
MCA
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
26.5
12.8
8.3
29.0
13.8
10.3
32.7
16.3
13.1
38.5
19.2
15.4
163.0
66.5
48.0
215.0
88.0
63.5
215.0
88.0
63.5
222.0
111.0
89.0
2
2
2
2
2
2
2
2
2
2
2
2
1/3
1/3
1/3
1/3
1/3
1/3
3/4
3/4
3/4
3/4
3/4
3/4
5.4
3.8
2.4
5.4
3.8
2.4
8.8
4.4
3.6
8.8
4.4
3.6
38.5
19.8
12.8
41.7
21.1
15.3
49.7
24.8
20
56.9
28.4
22.9
†
MOP
††
60
30
20
70
35
25
80
40
30
90
45
35
Remote Loads ‡
Electric Defrost
Evap. Defrost
System System
Fan Heater
MCA† MOP††
Amps Amps
Contact Factory for System
Electrical Ratings
Low Temperature – R-404A/R-507
Voltage
Supply ^
Unit Model
Number
Compressor
Model
BB*0401L6C
BB*0401L6D
BB*0401L6E
BB*0551L6C
BB*0551L6D
BB*0551L6E
BB*0601L6C
BB*0601L6D
BB*0601L6E
BB*0611L6C
BB*0611L6D
BB*0611L6E
BB*0751L6C
BB*0751L6D
BB*0751L6E
BB*1001L6C
BB*1001L6D
BB*1001L6E
BB*1201L6C
BB*1201L6D
BB*1201L6E
BB*1301L6C
BB*1301L6D
BB*1301L6E
4C0969SL
4C0969SL
4C0969SL
4C1145SL
4C1145SL
4C1145SL
4C1385SL
4C1385SL
4C1385SL
4C1480PL
4C1480PL
4C1480PL
4C1761PL
4C1761PL
4C1761PL
4C2067PL
4C2067PL
4C2067PL
4C2397PL
4C2397PL
4C2397PL
4B2707PL
4B2707PL
4B2707PL
Condenser
Fan Motors
Compressor
60 Hz
RLA
LRA
Qty.
HP
FLA
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
208-230/3
460/3
575/3
16.7
9.0
7.0
19.4
10.6
8.7
24.9
14.2
10.8
24.4
12.2
9.6
28.2
14.1
12.2
34.6
17.3
14.4
39.7
19.9
15.9
43.6
21.8
17.3
142.0
58.0
51.5
163.0
66.5
48.0
215.0
88.0
63.5
150.0
75.0
60.0
180.0
90.0
72.0
222.0
111.0
89.0
252.0
126.0
101.0
294.0
147.0
117.0
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
1/3
3/4
3/4
3/4
3/4
3/4
3/4
2.7
1.9
1.2
2.7
1.9
1.2
5.4
3.8
2.4
5.4
3.8
2.4
5.4
3.8
2.4
5.4
3.8
2.4
8.8
4.4
3.6
8.8
4.4
3.6
Beacon II™ or
Air Defrost
Remote Loads ‡
MCA† MOP††
Electric Defrost
Evap. Defrost
System System
Fan Heater
MCA† MOP††
Amps Amps
23.6
13.2
10.0
27.0
15.2
12.1
36.5
21.6
15.9
35.9
19.1
14.4
40.7
21.4
17.7
48.7
25.4
20.4
58.4
29.3
22.5
63.3
31.7
25.2
40.0
20.0
15.0
45.0
25.0
20.0
60.0
35.0
25.0
60.0
30.0
20.0
60.0
35.0
30.0
80.0
40.0
30.0
90.0
45.0
35.0
100.0
50.0
40.0
Contact Factory for System
Electrical Ratings
*= T for Outdoors, N for Indoors, S for Beacon II™
^ Consult factory for 50Hz applications.
† MCA = Minimum Circuit Ampacity
†† MOP = Maximum Overcurrent Protection
‡ Condensing unit data plate ratings will be based on actual system match.
11
Horizontal Discharge
Medium Temperature – R-404A/507
Specifications and Dimensional Data
3 - 22
Horizontal
HP Condensing
Discharge
Units
Medium & Low Temperature – R-404A/R-507
Unit Model
Number
Compressor
Model
HP
BB*0551M6
BB*0751M6
BB*0901M6
BB*1001M6
BB*0401L6
BB*0551L6
BB*0601L6
BB*0611L6
BB*0751L6
BB*1001L6
BB*1201L6
BB*1301L6
4C0969SH
4C1145SH
4C1385SH
4C1480PH
4C0969SL
4C1145SL
4C1385SL
4C1480PL
4C1761PL
4C2067PL
4C2397PL
4B2707PL
5.5
7.5
9.0
10.0
4.0
5.5
6.0
6.5
7.5
10.0
12.0
13.0
Refrigerant Line
Connections (OD)
Receiver Capacity
@ 90% full (lbs.)
Liquid
Suction
STD
OPT
Length
Width
Height
Approx.
Net Wt.
(lbs.)
5/8
5/8
7/8
7/8
1/2
1/2
5/8
5/8
5/8
5/8
7/8
7/8
1 3/8
1 3/8
1 5/8
1 5/8
1 1/8
1 1/8
1 3/8
1 3/8
1 3/8
1 3/8
1 5/8
1 5/8
67
67
67
67
28
28
67
67
67
67
67
67
78
78
87
87
52
52
78
78
78
78
87
87
36-3/4
36-3/4
41-3/4
41-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
36-3/4
41-3/4
41-3/4
63-3/4
63-3/4
75-1/8
75-1/8
51-3/4
51-3/4
63-3/4
63-3/4
63-3/4
63-3/4
75-1/8
75-1/8
39-1/4
39-1/4
48-3/4
48-3/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
39-1/4
48-3/4
48-3/4
823
862
993
1,101
595
645
775
865
935
1,000
1,082
1,173
Dimensions (inches)
*= T for Outdoors, N for Indoors, S for Beacon II™
One Fan Condenser
Two Fan Condenser
LEFT SIDE
FRONT
Height
Length
12
Width
Vertical Air Discharge Condensing Units 13 to 50 HP
Single Compressor
Standard and Optional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The Floating Tube™ coil design. Refrigerant-carrying copper
tubes do not contact any metal support sheets; instead,
the coil is constructed with expanded anchor tubes that
support the coil construction and do not carry refrigerant.
The coil design eliminates one of the major causes of leaks in
refrigeration systems
Limited five-year warranty against condenser tube sheet and
center support leaks
Designed for use with R-404A, R-507
Prebent copper tubes minimize welded joints on
internal piping
All sweat type connections, no flare joints to leak
Fixed high pressure switch eliminates capillary tubes
Oil safety control
Bitzer compressors with POE oil
Spring mounted compressor with suction and discharge
vibration eliminators
Crankcase heater
Thermally protected, permanently lubricated ball bearing
condenser fan motors
Separate subcooling circuit in condenser for added capacity
and vapor-free liquid
Receivers are sized for sufficient pumpdown capacity with
inlet and outlet service valves
Pressure relief valve on receiver
Sealed liquid line filter drier and sight glass
Electrical controls, including compressor contactor and
optional defrost control, are located in easily accessible
control box with a hinged cover
Service Mate™ module to assist troubleshooting
Pumpdown Switch
Cabinet is constructed from prepainted galvanized steel
Convenient access panels for easy servicing to internal
components
Factory-Installed Options
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Compressor unloading
Replaceable core liquid filter drier
Liquid line solenoid valve
Suction filter
Replaceable core suction filter
Suction accumulator
Oil separator with discharge line check valve
Air defrost timer
Electric defrost kits, including timer, evaporator fan contactor
with fusing, defrost heater contactor(s), lockout relay and
terminal strip
Fusing for defrost kits
Evaporator holdout relays for systems with multiple electric
defrost evaporators
Low ambient kit with heated and insulated receiver with
time delay
Fused disconnect switch
Non-fused disconnect switch
Phase-loss protection
Manual-reset high pressure switch
Anti-short cycle timer
Compressor circuit breakers
Condenser fan cycling (standard on BDVS)
Three-way heat reclaim valve (n/a on BDVS)
Coated condenser coils for protection against corrosion in
harsh environments
Beacon II™ compatible
Nomenclature
B
Brand
B = Bohn
L
Head Pressure
Control
L - Limitizer®
D - Beacon II™
V
000B
L
6
C
Airflow
Horsepower
Temp. Range
Refrigerant
Voltage
V = Vertical
VS = Vertical Beacon
130B - 13
150B - 15
200B - 20
220B - 22
250B - 25
300B - 30
330B - 33
350B - 35
400B - 40
500B -50
M = Med. Temp.
L = Low Temp.
6 = R-404A,
R-507
C = 208-230/3/60
D = 460/3/60
E = 575/3/60
13
Single Vertical Air Discharge Condensing Unit
•
Performance Data
Medium Temperature – R-404A/R-507
Unit Model
Number
Compressor
Model
Single Vertical Air Discharge Condensing Unit
B*V*150BM6
4C2067PH
B*V*200BM6
4C2397PH
B*V*220BM6
4B2707PH
B*V*250BM6
4B3139PH
B*V*300BM6
4B3604PH
B*V*330BM6
6B4060PH
B*V*350BM6
6B4709PH
B*V*400BM6
6B5406PH
B*V*500BM6
6B6462PH
B*V = BLV is Limitizer®, BDVS is Beacon II™
Suction Temp.
°F
Notes: For 50 cycle capacity, multiply values by .86
14
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
197120
165780
150650
136230
122680
98790
230460
192070
174410
157400
141810
113840
254200
212600
193960
175330
157850
127090
291480
245260
222450
201510
181830
146820
339410
284940
259200
235080
211960
171290
385050
321570
292920
263780
237640
190700
438780
369160
335750
303260
273630
220740
505840
425630
388520
352010
317530
256880
592370
501120
457060
414850
375030
304620
188290
157400
143110
129380
116550
93540
219760
183360
166320
150000
134810
107790
244040
204700
185270
167820
150960
121320
279820
234460
213660
193150
173860
140070
324930
273150
248290
225050
202640
163320
368290
308190
279790
252590
227190
181990
421120
353880
321530
290650
261560
210580
483740
408880
371110
336760
303520
245160
567970
479900
437280
396510
357970
290190
178750
150410
132640
123010
110440
88070
209960
175590
158250
142470
127880
101800
232880
195360
177330
160390
144070
115590
268270
225090
203930
184500
165980
133380
311370
261580
237590
214940
193290
155450
352830
296110
267620
241230
216720
173230
401770
338590
306610
277520
249500
200500
463250
391180
354990
321570
289520
233350
543770
485690
417510
378160
341040
275780
162020
134650
121880
109570
98170
77590
191380
157870
142410
127770
113890
89390
213790
177890
161290
145490
130340
103770
243980
204400
185400
167350
150090
119580
285650
238360
215910
194800
174680
139050
323590
268900
243190
218990
195850
155250
368420
307100
278580
251470
225500
179780
424260
355120
322990
291390
261700
209240
494050
415900
378430
341770
307300
246360
Performance Data
Unit Model
Number
Compressor
Model
B*V*130BL6
4B2707PL
B*V*150BL6
4B3139PL
B*V*200BL6
4B3604PL
B*V*220BL6
6B4060PL
B*V*250BL6
6B4709PL
B*V*300BL6
6B5406PL
B*V*400BL6
6B6462PL
Suction Temp.
°F
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
105960
81650
70890
61310
46800
39880
123250
95940
83810
73030
56580
48750
141040
110120
96260
83860
64670
55050
156330
120650
104810
90770
69550
59470
184510
142790
124340
107930
83040
71140
204160
158700
138390
120340
92900
80050
245130
189440
164710
142690
109060
93380
100880
77300
66880
57620
43630
37260
117250
90740
78930
68530
52580
45290
133910
104050
90640
78710
60140
51170
148990
114230
98870
85340
64720
55420
175840
135120
117270
101510
77430
66410
194480
150250
130550
113100
86400
74380
232960
178850
154820
133540
100910
86320
95790
72980
62900
53960
40420
34420
111270
85500
74120
63970
48520
41760
126850
97980
85090
73500
55580
47240
141590
107830
92970
79790
59860
51350
166300
127430
110260
94950
71770
61560
190060
141860
122800
105750
79830
68650
220670
168260
144950
124260
92610
79130
85810
64920
55370
46770
33650
29100
99750
75940
64930
55110
40050
34500
112960
86810
74470
63370
46070
39070
127330
96230
81890
69200
49790
43220
148750
113350
96980
82350
59880
51750
165790
126570
108090
91680
66380
56190
196830
148730
126420
106400
74580
63910
Single Vertical Air Discharge Condensing Unit
Low Temperature – R-404A/R-507
B*V = BLV is Limitizer®, BDVS is Beacon II™
Notes: For 50 cycle capacity, multiply values by .86
15
Electrical Data
Medium & Low Temperature – R-404A/R-507
Compressor
Single Vertical Air Discharge Condensing Unit
Unit Model
Number
Compressor
Model
B*V*150BM6
B*V*200BM6
B*V*220BM6
B*V*250BM6
B*V*300BM6
B*V*330BM6
B*V*350BM6
B*V*400BM6
B*V*500BM6
B*V*130BL6
B*V*150BL6
B*V*200BL6
B*V*220BL6
B*V*250BL6
B*V*300BL6
B*V*400BL6
Condenser Fan
Motors
RLA
LRA
Qty.
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
48.7
57.7
61.5
75.6
89.7
100.0
105.1
141.0
143.6
43.6
46.2
57.7
65.4
69.2
84.6
97.4
294
352
352
436
490
550
550
700
950
294
294
352
436
436
490
700
2
2
2
2
3
3
3
4
4
2
2
2
2
2
2
3
B*V*150BM6
B*V*200BM6
B*V*220BM6
B*V*250BM6
B*V*300BM6
B*V*330BM6
B*V*350BM6
B*V*400BM6
B*V*500BM6
B*V*130BL6
B*V*150BL6
B*V*200BL6
B*V*220BL6
B*V*250BL6
B*V*300BL6
B*V*400BL6
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
24.4
28.8
30.8
37.8
44.9
50.0
52.6
70.5
71.8
21.8
23.1
28.8
32.7
34.6
42.3
48.7
147
176
176
218
245
275
275
350
425
147
147
176
218
218
245
350
2
2
2
2
3
3
3
4
4
2
2
2
2
2
2
3
B*V*150BM6
B*V*200BM6
B*V*220BM6
B*V*250BM6
B*V*300BM6
B*V*330BM6
B*V*350BM6
B*V*400BM6
B*V*500BM6
B*V*130BL6
B*V*150BL6
B*V*200BL6
B*V*220BL6
B*V*250BL6
B*V*300BL6
B*V*400BL6
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
19.6
23.6
24.4
30.1
35.9
39.7
41.7
56.4
57.1
17.3
18.6
23.1
26.9
27.6
33.3
39.1
117
140
140
165
196
220
220
280
340
117
117
140
174
174
196
280
2
2
2
2
3
3
3
4
4
2
2
2
2
2
2
3
FLA
208-230 Volts
9.6
14.0
14.0
14.0
21.0
21.0
21.0
28.0
28.0
9.6
9.6
9.6
14.0
14.0
14.0
21.0
460 Volts
4.8
7.0
7.0
7.0
10.5
10.5
10.5
14.0
14.0
4.8
4.8
4.8
7.0
7.0
7.0
10.5
575 Volts
4.6
5.6
5.6
5.6
8.4
8.4
8.4
11.2
11.2
4.6
4.6
4.6
5.6
5.6
5.6
8.4
Beacon II™ or
Air Defrost
MCA
†
MOP
††
Evap.
Fan
Amps
Electric Defrost
Defrost
System
Heaters
MCA†
Amps
System
MOP††
70.5
86.1
90.9
108.5
133.1
146.0
152.4
204.3
207.5
64.1
67.4
81.7
95.8
100.5
119.8
142.8
110
125
150
175
200
225
250
325
350
100
110
125
150
150
200
225
Contact Factory for System
Electrical Ratings
35.3
43.0
45.5
54.3
66.6
73.0
76.3
102.1
103.8
32.1
33.7
40.8
47.9
50.3
59.9
71.4
60
70
70
90
110
110
125
150
175
50
50
70
80
80
100
110
Contact Factory for System
Electrical Ratings
29.1
35.1
36.1
43.2
53.3
58.0
60.5
81.7
82.6
26.2
27.9
33.5
38.5
40.1
47.2
57.3
40
50
60
70
80
90
100
125
125
40
45
50
60
60
80
90
Contact Factory for System
Electrical Ratings
B*V = BLV is Limitizer®, BDVS is Beacon II™
† MCA = Minimum Circuit Ampacity
† † MOP = Maximum Overcurrent Protection
‡ Condensing unit data plate ratings will be based on actual system match.
Beacon II™ and Air Defrost Units do not carry any of the evaporator fan or heater loads. Power is
brought directly to the evaporators and does not go through the condensing unit.
An evaporator heater hold out relay (option) is recommended when two or more evaporators are
connected to a single (BLV/ BBV) condensing unit to allow termination on coils that have already
defrosted to prevent unnecessary steaming. This option is not needed on Beacon II™ (BDVS)
systems wired for a Master / Slave operation. Power is brought to each Beacon evaporator. Each coil
terminates its own defrost. Refrigeration will not start until all coils have terminated defrost.
16
Remote Loads ‡
Specifications and Dimensional Data
Medium & Low Temperature – R-404A/R-507
B*V*150BM6
B*V*200BM6
B*V*220BM6
B*V*250BM6
B*V*300BM6
B*V*330BM6
B*V*350BM6
B*V*400BM6
B*V*500BM6
B*V*130BL6
B*V*150BL6
B*V*200BL6
B*V*220BL6
B*V*250BL6
B*V*300BL6
B*V*400BL6
Compressor
HP
Model
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
15
20
22
25
30
33
35
40
50
13
15
20
22
25
30
40
Liquid
Suction
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
BLV & Beacon II
Net
Dimensions
Receiver Capacity @
Weight
(Inches)
90% full (lbs.)
(Approx)
LBS
KG
(A)
(lbs)
123
123
123
123
188
188
188
188
188
81
81
81
123
123
123
188
56
56
56
56
85
85
85
85
85
37
37
37
56
56
56
85
144
171
171
171
226
226
226
281
281
144
144
144
171
171
171
226
1,400
1,625
1,690
1,935
1,615
1,785
1,885
2,440
2,835
1,590
1,800
1,870
2,075
2,170
2,180
1,920
Single Vertical Air Discharge Condensing Unit
Unit Model
Number
Refrigerant Line
Connections (OD)
B*V = BLV is Limitizer®, BDVS is Beacon II™
Dimensions (Inches)
End View
Side View
17
Vertical Air Discharge Condensing Units 26 to 100 HP
Dual Compressor
Standard and Optional Features
•
•
•
Designed for use with R-404A/507
Bitzer compressors with POE oil
Thermally protected permanently lubricated ball
bearing condenser fan motors
Electrical controls, including compressor contactor
and optional defrost control, are located in easily
accessible control box with a hinged cover
Limitizer® (JLD) head pressure control system
Receivers are sized for sufficient pumpdown
capacity with inlet and outlet service valves
Cabinet is constructed from prepainted
galvanized steel
Convenient access panels for easy servicing to
internal components
Suction and discharge vibration eliminators
Separate subcooling circuit in condensers for added
capacity and vapor-free liquid
Sealed liquid line filter drier and sight glass
Service Mate™ module to assist troubleshooting
Floating Tube™ coil design
Prebent copper tubes minimize welded joints on
internal piping
•
•
•
•
•
•
•
•
•
•
•
Factory-Installed Options
Additional Standard Features
for Parallel Piped Units
Dual Vertical Air Discharge Condensing Unit
1.
2.
3.
4.
5.
Replaceable core liquid line filter drier
Replaceable core suction filter
Suction accumulator
Oil management system
Contact Factory for Beacon IITM Application
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Replaceable core liquid line filter driers with
sight glasses
Liquid line solenoid valves
Suction filters
Replaceable core suction filters
Suction accumulators
Oil separators with discharge line check valves
Air defrost timers
Electric defrost kits, including timer, evaporator fan
contactor with fusing, defrost heater contactor(s),
lockout relay and terminal strip
Low ambient kits with heated and insulated receiver with
time delay
Compressor unloading
External discharge line mufflers
Phase-loss protection
Manual-reset high pressure switches
Anti-short cycling timers
Compressor circuit breakers
Condenser fan cycling (standard on JDDS)
Three way heat reclaim valve with mounted check valves
(n/a on JBD)
Coated condenser coils for protection against corrosion
in harsh environments
Beacon II™ compatible
Nomenclature
J
Brand
J = Bohn
18
L
Head Pressure
Control
L - Limitizer®
D - Beacon II™
D
000B
L
6
C
Airflow
Horsepower
Temp. Range
Refrigerant
Voltage
260B - 26
300B - 30
400B - 40
440B - 44
500B - 50
600B - 60
660B - 66
700B - 70
800B - 80
110B -100
M = Med. Temp.
L = Low Temp.
6 = R-404A,
R-507
D = Vertical
DS = Vertical
Beacon
C = 208-230/3/60
D = 460/3/60
E = 575/3/60
Performance Data
Unit Model
Number
Compressor
Model
(2 Each)
J*D*300BM6
4C2067PH
J*D*400BM6
4C2397PH
J*D*440BM6
4B2707PH
J*D*500BM6
4B3139PH
J*D*600BM6
4B3604PH
J*D*660BM6
6B4060PH
J*D*700BM6
6B4709PH
J*D*800BM6
6B5406PH
J*D*110BM6
6B6462PH
Suction Temp.
°F
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
40
30
25
20
15
5
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
394250
331570
301290
272450
245360
197580
460920
384140
348820
314800
283620
227670
508400
425210
387920
350670
315710
254190
582960
490520
444900
403020
363660
293650
678820
569890
518410
470170
423920
342580
770100
643130
585850
527550
475270
381390
877570
738320
671500
606520
547270
441480
1011680
851260
777050
704020
635050
513760
1184730
1002230
914120
829690
750050
609230
376590
314800
286220
258760
233090
187090
439520
366730
332640
299990
269620
215570
488080
409390
370550
335640
301920
242630
559640
468920
427310
386290
347710
280140
649850
546290
496570
450090
405270
326630
736570
616390
559580
505170
454380
363990
842230
707760
643050
581300
523130
421160
967490
817760
742220
673510
607050
490320
1135930
959810
874560
793020
715930
580370
357490
300810
265290
246010
220890
176140
419910
351180
316500
284950
255760
203590
465770
390720
354660
320780
288130
231170
536530
450170
407850
369000
331970
266760
622730
523150
475180
429890
386590
310890
705660
592210
535230
482450
433450
346540
803550
677170
613220
555030
498990
400990
926490
782360
709980
643140
579050
466700
1087530
917380
835020
756310
682090
551560
324040
269290
243760
219040
196340
155170
382760
315740
284830
255530
227790
178780
427590
355770
322580
290970
260680
207540
487960
408790
370800
334690
300180
239150
571310
476730
431820
389600
349370
278110
647170
537790
486380
437980
391700
310500
736830
614200
557150
502940
451000
359560
848530
710240
645990
582780
523390
418470
988100
831800
756870
683550
614590
492720
Dual Vertical Air Discharge Condensing Unit
Medium Temperature – R-404A/R-507
J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped
19
Performance Data
Low Temperature – R-404A/R-507
Unit Model
Number
Compressor
Model
(2 Each)
Dual Vertical Air Discharge Condensing Unit
J*D*260BL6
4B2707PL
J*D*300BL6
4B3139PL
J*D*400BL6
4B3604PL
J*D*440BL6
6B4060PL
J*D*500BL6
6B4709PL
J*D*600BL6
6B5406PL
J*D*800BL6
6B6462PL
Suction Temp.
°F
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
0
-10
-15
-20
-30
-40
J*D = , JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped
20
90°F
Amb.
95°F
Amb.
100°F
Amb.
110°F
Amb.
211930
163290
141770
122620
93600
79760
246490
191890
167610
146060
113170
97500
282080
220240
192520
167720
129340
110090
312650
241300
209620
181550
139100
118940
369030
285580
248670
215850
166080
142280
408320
317410
276770
240670
185790
160100
490250
378890
329420
285380
218130
186770
201760
154600
133760
115230
87260
74510
234490
181480
157870
137070
105150
90590
267830
208090
181280
157420
120290
102350
297970
228460
197730
170680
129450
110850
350950
270240
234530
203020
154850
132800
388960
300490
261100
226200
172800
148770
465930
357700
309630
267080
201830
172630
191580
145970
125810
107910
80840
68840
222550
170990
148240
129950
97030
83510
253710
195590
170180
146990
111160
94480
283180
215670
185940
159580
119730
102700
332610
254860
220520
189890
143530
123120
380130
283720
245600
211500
159650
137310
441340
336520
289900
248530
185220
158260
171630
129850
110740
93530
67290
58200
199500
151890
129860
110220
80094
68990
225910
173620
148940
126740
92150
78130
254650
192460
163780
138390
99570
86450
297490
226690
193970
164690
119770
103500
331580
253140
216170
183350
132760
112380
393670
297450
252840
212800
149700
127820
Electrical Data
Medium & Low Temperature – R-404A/507
Condenser Fan
Motors
Unit Model
Number
Compressor
Model
(2 Each)
RLA
LRA
Qty.
J*D*300BM6
J*D*400BM6
J*D*440BM6
J*D*500BM6
J*D*600BM6
J*D*660BM6
J*D*700BM6
J*D*800BM6
J*D*110BM6
J*D*260BL6
J*D*300BL6
J*D*400BL6
J*D*440BL6
J*D*500BL6
J*D*600BL6
J*D*800BL6
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
48.7
57.7
61.5
75.6
89.7
100.0
105.1
141.0
143.6
43.6
46.2
57.7
65.4
69.2
84.6
97.4
294
352
352
436
490
550
550
700
950
294
294
352
436
436
490
700
4
4
4
4
6
6
6
8
8
4
4
4
4
4
4
6
J*D*300BM6
J*D*400BM6
J*D*440BM6
J*D*500BM6
J*D*600BM6
J*D*660BM6
J*D*700BM6
J*D*800BM6
J*D*110BM6
J*D*260BL6
J*D*300BL6
J*D*400BL6
J*D*440BL6
J*D*500BL6
J*D*600BL6
J*D*800BL6
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
24.4
28.8
30.8
37.8
44.9
50.0
52.6
70.5
71.8
21.8
23.1
28.8
32.7
34.6
42.3
48.7
147
176
176
218
245
275
275
350
425
147
147
176
218
218
245
350
4
4
4
4
6
6
6
8
8
4
4
4
4
4
4
6
J*D*300BM6
J*D*400BM6
J*D*440BM6
J*D*500BM6
J*D*600BM6
J*D*660BM6
J*D*700BM6
J*D*800BM6
J*D*110BM6
J*D*260BL6
J*D*300BL6
J*D*400BL6
J*D*440BL6
J*D*500BL6
J*D*600BL6
J*D*800BL6
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
19.6
23.6
24.4
30.1
35.9
39.7
41.7
56.4
57.1
17.3
18.6
23.1
26.3
27.6
33.3
39.1
117
140
140
165
196
220
220
280
340
117
117
140
174
174
196
280
4
4
4
4
6
6
6
8
8
4
4
4
4
4
4
6
FLA
Beacon II™ or
Air Defrost
MCA
†
208-230 Volts
19.2
128.8
28.0
157.8
28.0
166.4
28.0
198.1
42.0
243.8
42.0
267.0
42.0
278.5
56.0
373.3
56.0
379.1
19.2
117.3
19.2
123.2
19.2
149.0
28.0
175.2
28.0
183.7
28.0
218.4
42.0
261.2
460 Volts
9.6
64.5
14.0
78.8
14.0
83.3
14.0
99.1
21.0
122.0
21.0
133.5
21.0
139.4
28.0
186.6
28.0
189.6
9.6
58.7
9.6
61.6
9.6
74.4
14.0
87.6
14.0
91.9
14.0
109.2
21.0
130.6
575 Volts
9.2
53.3
11.2
64.3
11.2
66.1
11.2
78.9
16.8
97.6
16.8
106.1
16.8
110.6
22.4
149.3
22.4
150.9
9.2
48.1
9.2
51.1
9.2
61.2
11.2
70.4
11.2
73.3
11.2
86.1
16.8
104.8
Remote Loads ‡
MOP
††
Evap.
Fan
Amps
Electric Defrost
Defrost
System
Heaters
MCA†
Amps
System
MOP††
175
200
225
250
325
350
350
500
500
150
150
200
225
250
300
350
CONTACT FACTORY FOR SYSTEM
ELECTRICAL RATINGS
80
100
110
125
150
175
175
250
250
80
80
100
110
125
150
175
CONTACT FACTORY FOR SYSTEM
ELECTRICAL RATINGS
70
80
90
100
125
125
150
200
200
60
70
80
90
100
110
125
CONTACT FACTORY FOR SYSTEM
ELECTRICAL RATINGS
Dual Vertical Air Discharge Condensing Unit
Compressor
J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped
† MCA = Minimum Circuit Ampacity
†† MOP = Maximum Overcurrent Protection
‡ Condensing unit data plate ratings will be based on actual system match.
21
Specifications and Dimensional Data
Medium & Low Temperature – R-404A/R-507
Unit Model
Number
J*D*300BM6
J*D*400BM6
J*D*440BM6
J*D*500BM6
J*D*600BM6
J*D*660BM6
J*D*700BM6
J*D*800BM6
J*D*110BM6
J*D*260BL6
J*D*300BL6
J*D*400BL6
J*D*440BL6
J*D*500BL6
J*D*600BL6
J*D*800BL6
Compressor
Model
(2 each)
4C2067PH
4C2397PH
4B2707PH
4B3139PH
4B3604PH
6B4060PH
6B4709PH
6B5406PH
6B6462PH
4B2707PL
4B3139PL
4B3604PL
6B4060PL
6B4709PL
6B5406PL
6B6462PL
HP
30
40
44
50
60
66
70
80
100
26
30
40
44
50
60
80
Standard (2 each)
Parallel Piped
Liquid
Suction
Liquid
Suction
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-5/8
1-5/8
2-1/8
2-1/8
2-1/8
2-1/8
2-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
2-1/8
2-1/8
2-1/8
2-5/8
2-5/8
2-5/8
3-1/8
3-1/8
3-1/8
2-1/8
2-5/8
2-5/8
3-1/8
3-1/8
3-1/8
3-1/8
J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped
Dimensions (Inches)
Dual Vertical Air Discharge Condensing Unit
22
StandardReceiver
Capacity@90%full
(lbs.)(2each)
Connections (in.)
ParalellPiped
ReceiverCapacity@
90%full(lbs.)
Dimensions
(inches)
LBS
KG
LBS
KG
A
Approx.
Net
Weight
(lbs.)
123
123
123
123
188
188
188
188
188
81
81
81
123
123
123
188
56
56
56
56
85
85
85
85
85
37
37
37
56
56
56
85
188
188
269
269
269
269
363
363
363
188
188
188
269
269
269
363
85
85
122
122
122
122
165
165
165
85
85
85
122
122
122
165
144
171
171
171
226
226
226
281
281
144
144
144
171
171
171
226
2,805
3,250
3,380
3,875
3,225
3,570
3,770
4,880
5,670
3,175
3,605
3,735
4,145
4,240
4,355
3,835
23
For more information on Bohn refrigeration products, contact your sales
representative or visit us at www.heatcrafrpd.com.
A Brand of Heatcraft Refrigeration Products LLC
2175 West Park Place Blvd. • Stone Mountain, GA • 30087
(800) 537-7775 • FAX (770) 465-5990
www.heatcraftrpd.com
Since product improvement is a continuing effort, we reserve the right to
make changes in specifications without notice.
Download