CM-25350
• UL 924 listed
• UL damp location listing standard
• NFPA 101, NEC, IBC, BOCA, and OSHA illumination standard
• Robust die cast and extruded powder painted aluminum components.
• A full range of pleasing architecturally inspired finishes are available (see below).
• Splendore is designed to be wall mounted to a
3-1/2” octagonal junction box.
• Installation is quick and easy using simple two-piece snap together construction.
• The backplate is provided with convenient keyhole slots for mounting and a tamperproofing option is available for added security.
• 120/277 VAC dual voltage input.
• AC Only: accommodates 120/277 VAC dual input.
This model may be controlled by a wall switch or dimming circuit.
• 2CKT1: offers the AC-only input but includes a 120/120 utility and emergency feed from a generator or AC inverter system for egress lighting.
• 2CKT2: offers the AC-only feature but includes a 277/277 utility and emergency feed from a generator or AC inverter system for egress lighting.
• Power concumption
• 120 VAC: 0.10 A, 11.73 W
• 277 VAC: 0.04 A, 11.61 W
• -22°F (-30°C) to 104°F (40°C)
• Illumination is provided by two 3 W, white LEDs and a specular Miro 4 (Alanod™) aluminum reflector.
• The lamp head assembly may be rotated in fivedegree increments over a range of 60 degrees for ideal distribution along the egress path.
• Five full year on electronics and unit.
Project
Type
Model No.
Comments
rev. 10,
SNO
Options
TP – Tamperproof
Series
SNO – Splendore
Normally
On
Housing Color
W – White
B – Black
A – Aluminum
G – Gunmetal
BR – Ornamental
Bronze
AC – Aged Copper
VG – Velvet Green
N – Nickel
Accessories (Order Separately)
T10TPTOOL - Tamperproof Tool with Bit
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
CM-25350 03/13

CM-25350
rev. 10,
• TP – The tamperproof option provides torx T15 hardware with center pin reject and the bit required to secure and access the equipment for future servicing.
6.0"
(15.2cm)
4.5"
(11.4cm)
13.1"
(33.3cm)
Meets Life Safety Code illumination standard; average of 1.0 FC, no point less than 0.1 FC, max to min ratio of 40:1. Assumes open space with no obstructions, mounting height: 7.5' and reflectances: 80/50/20. Analysis based on independently tested photometrics.
Wall Mounted, 7.5' AFF Test No.: ITL56856
7.5 ft.
Dual fixtures on 26 foot centers provide 1 footcandle average.
Single fixture provides 1 footcandle average over 12 feet.
.02 FC min.
1 FC avg.
12 ft.
3 ft.
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
CM-25350 03/13
Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216 www.philips.com/luminaires
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008 www.philips.com/luminaires