codes and standards
• UL listed to Standard 924
• NFPA 101 (Life Safety Code)
• IBC, NFPA 70 (National Electric Code) and OSHA
Standards
California Energy Commission
• UL listed for damp location as an optional feature
construction
• Available in matte black housing with brushed
aluminum face; white housing with a brushed
aluminum face.
• All black, white or aluminum housing and face.
• Black and white finishes are epoxy based powder
coat paint.
• Cast aluminum with perfectly stenciled 6” EXIT
letters backed with durable green or red panel.
• NFPA compliant field selectable chevrons.
installation
• A universal, shallow canopy is provided with each
exit for ceiling and end mounting.
• Provisions are available via universal knockouts for
direct mounting to recessed junction box.
• Back wall mount units require no conopy on
standard or emergency exits because battery and
electronics are inside housing.
electronics
• AC Only:
120/277 VAC dual voltage input with surge
protection is standard on all models. -40°F (-40°C)
to 113°F (45°C).
• Emergency Operation
120/277 VAC input, surge protection, brownout,
AC lockout and low voltage disconnect features
are standard. 32°F (0°C) to 104°C (40°C).
CE-11400
• Wattage –
AC Only Operation - Input Power Requirements
Red – 3.8 Watts (120 VAC), PF = 0.96
– 3.8 Watts (277 VAC), PF = 0.91
Green – 4.0 Watts (120 VAC), PF = 0.95
– 4.0 Watts (277 VAC), PF = 0.90
Self-Powered - Input Power Requirements
Input Power Requirements
Red – 4.7 Watts (120 VAC), PF = 0.95
– 4.8 Watts (277 VAC), PF = 0.97
Green – 4.7 Watts (120 VAC), PF = 0.95
– 4.7 Watts (277 VAC), PF = 0.99
• The electronics diagnostic/charging platform with
self-testing mode automatically runs a one-minute
self-test every 30 days and a 30 minute on the
sixth and twelfth month. A one minute or 90
minute test may be initiated via the push to test
switch on the unit or by activating the appropriate
test command on the optional SRT remote tester.
rev. 10,
Commercial Exit Signs
55 Line
Die Cast Aluminum LED
Traditional
LED
• Exit face illumination is provided by a special high
intensity indirect red or green LED strip. Letter
brightness and illumination uniformity exceed UL
requirements.
battery
• Maintenance free, sealed nickel cadmium battery
provides 90 minutes of emergency illumination.
Specifier’s Reference
Project
Type
warranty
Model No.
• Five year warranty from date of purchase.
Comments
Green Product Choice: ER55LDT212/27WRFIF
Accessories
No. of Faces
1 – Single Face
2 – Double Face
Family
55LA – LED
(AC Only)
ER55LDT – Emergency LED,
Nicad battery,
self-diagnostic/
self-test
Housing Finish
BLANK – Matte Black
with brushed
Alum. face
A – Aluminum
B – Black
W – White
WB – White with
brushed Alum.
face
Input Voltage
12/27 – Dual Voltage
(120/277v)
Footnotes
Used only on Emergency Exits. The LED lamps will flash
and/or activate the buzzer when normal power fails
(Emergency Mode)
2
55LA version: The LED Lamps will flash when activated if
external EM backup is present. ER55LDT version: The LED
lamps will flash when activated by internal battery upon
failure of normal power.
3
55LA Series only.
4­
Requires longer 13.5" x 8.5" x 2.5" housing.
5­
Some options may impact UL listing when combined with
other options. (Consult factory.)
1
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
CE-11400 03/13 Options
5
Letter Color R – Red
G – Green
TP – Tamperproof Screws
DR – Damp Location Rating
F – Flashing in Emergency Mode1
B – Buzzer in Emergency Mode1
FB – Flashing/Buzzer in Emergency Mode1
FIF – Fire Alarm Interface with Flashing2
DC – 12-48VDC External Back-up
(AC only)3
VL – Vandal Resistant Lens
2C12 – Two Circuit (120v) AC only3
2C27 – Two Circuit (277v) AC only3
SW – Special Wording4
EX – Special Input Transformer (specify
voltage and frequency)
TA – Audible Self-diagnostics
PCS1 – Polycarbonate Vandal Shield
WG4 – Wire Guard for wall mounting
WGI0 – Wire Guard for end mounting
55LPKIT12W – Pendant Assembly, 12" white
55LPKIT12B – Pendant Assembly, 12" black
T15TPTOOL – Tamper Proof Screwdriver
SRT – Self testing red remote tester
Note:
For (8" Letters) New York City die cast aluminum
exit signs, refer to specification sheet number
CN-26300.
CE-11400
dimensions
55 Line Die Cast Aluminum LED Traditional
rev. 10,
Wall Mount
8-1/8"
(210mm)
End Mount
EXIT
13-1/4"
(337mm)
4-3/4"
(121mm)
4-5/8"
(118mm)
EXIT
14"
(356mm)
2-3/8"
(606mm)
2-3/8"
(60mm)
Recessed Mount
4-5/8"
(118mm)
8-7/8"
(226mm)
Front
EXIT
13-1/4"
(337mm)
2-3/8"
(60mm)
Back
System Reset: Two presses of "SILENCE ALARM"
button followed by two presses of "CANCEL"
button.
Interpretation of Flashing Indicator lights on
Equipment:
Green LED Indicator:
•
Steady On - Normal
•
Slow Flash - Battery Charging
•
Fast Flash - Unit is self-testing
Red LED Indicator:
•
Single Flash - Battery Fault
•
Double Flash - Lamp Failure
•
Triple Flash - Charger Fault
•
Quad Flash - Emergency Transfer Failure
Red and Green LED indicators flashing together:
•
Slow Flashing - Low Line Voltage
•
Fast Flashing - High Line Voltage
Unit Equipment Lamp Calibration
Press "Silence Alarm" twice followed by one press
of "Cancel" and one press of "Silence Alarm"
For Service Call (910)259-1000
3.38"
(86mm)
2.13"
(54mm)
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
CE-11400 03/13 www.philips.com/luminaires
www.philips.com/luminaires