Surge Protection Made Simple™
SurgePOD™ PRO
Type 1 SPDs Provide Optimal
Surge Protection for Light
Commercial and Residential
Applications
• Type 1 UL 1449 3rd Edition Listed SPDs are
easily selected and installed on the loadside or lineside
of the service entrance overcurrent protective device
• Voltage specific models precisely match and protect
electrical systems and equipment better than
“one-size-fits-all” SPD
• Thermal disconnect technology eliminates the need
for additional fusing
• Compact UV resistant NEMA 4X enclosure for
indoor or outdoor applications
• easyID™ LED status indicator provides surge
protection status at a glance
See Data Sheet # 10033 • www.cooperbussmann.com/Surge
SurgePOD™ PRO
• The Value Type 1 SPD for sensitive
residential and light commercial
applications
• 120 to 480Vac
• 200kA SCCR
• Single-phase, split-phase,
Wye, Delta systems
• Thermal disconnect MOV technology
eliminates the need for additional fusing
• Two-year warranty
SurgePOD™ PRO Part Numbers
easyID™
Catalog Number
SPP40SP1120SN
SPP40SP2240PN
SPP40SP3240DLG
SPP40SP3480DLG
SPP40SP3208WYG
SPP40SP3480WYG
Nominal
System
Voltage
120V
240V
240V
480V
208V
480V
System Type
Single-Phase 2 Wire
Split-Phase 3 Wire
Three-Phase Delta 3 Wire + G
Three-Phase Delta 3 Wire + G
Three-Phase Wye 3 Wire + G
Three-Phase Wye 3 Wire + G
SurgePOD™ PRO Specifications
SurgePOD™ PRO Color
Markets
System Types
Nominal System Voltage
Max. Continuous Operating AC Voltage
MCOV) [VC]
Installation Connections
N-G Protection
Protection From
SCCR
Nominal Discharge Current (8x20µs) In
Max. Discharge Current (8x20µs) Imax
Response Time tA
Frequency
Operating Status/Fault Indication
Conductor Guage / Length
Mounting
Enclosure Rating
Degree of Protection (Installed State)
SPD Install Location
Circuit Location
Standards/ Agency Information
Operating Temperature
Operating Altitude
Product Warranty
Data Sheet
Grey
Residential, Light Commercial and UL 508A Panels
Single, Delta and Wye
120, 208, 240, 480Vac
Matched to Nominal Voltage
(150 to 550Vac)
2, 3, 4 Wires
No
Severe Transient & TOV (temporary overvoltage)
200kA
10kA
40kA
<25ns
50/60Hz
One Bi-Color LED - Green (Good) / Red (Replace)
10 AWG Stranded Copper/ 18 inches
Chase Nipple/Bracket
NEMA 4X - UL 94-5VA
IP20 (finger-safe)
Indoor/Outdoor
Lineside/Loadside
UL 1449 3rd Edition Type 1 Listed SPD - cULus, RoHS Compliant
-40˚C to +65˚C
12,000 Feet
2 Years*
10033
* See Cooper Bussmann SPD Limited Warranty Statement (3A1502) for details at www.cooperbussmann.com/Surge.
easyID™ LED Status Indicator
Standard on the SurgePOD PRO, the easyID™ LED status indicator will illuminate when the unit is properly installed and the system or
equipment being protected is energized. The following LED color/status indicates:
GREEN LED = Good
RED LED = Replace
Circuit is energized
and protected.
Circuit is energized
and unprotected.
Unit needs replacing.
* Authorized personnel should follow all prescribed lockout/tagout and safety procedures in troubleshooting the cause for the above conditions.
Opening the SPD enclosure will void UL listing and warranty.
© 2013 Cooper Bussmann
www.cooperbussmann.com
Reorder # 10034
0213
2.5M
LED is Out*/ Unlit:
• Circuit is most likely deenergized
• Unit’s leads are
disconnected
• Unit is damaged