Two-Speed, Two-Winding, Variable Torque, Three Phase Two
advertisement
Two-Speed, One-Winding, Variable Torque, Three Phase Dripproof, Rigid Base Applications: Commercial and industrial fans, blowers, pumps, and other machinery that have variable torque characteristics. Prolonged use at low speed can result in significant energy savings. Dripproof motors are intended for use in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). Features: • Ball Bearings • 1.15 Service Factor • UL Recognized and CSA Certified HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. 3/.75 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 1800/900 200-230 200-230 460 200-230 200-230 460 200-230 460 200-230 460 460 460 182T 182T 182T 184T 184T 184T 213T 213T 215T 215T 256T 284T Y484✯ Y1484✯ Y485 Y486✯ Y1486✯ Y487✯ Y488 Y489✯ Y490 Y491 Y492 Y493 182TTDR7412 182TTDW7412 182TTDR7203 184TTDR7287 184TTDW7287 184TTDR7209 213TTDW7202 213TTDW7201 215TTDW17206 215TTDW7201 256TTDX7207 284TTDP7202 $606 $606 $606 $848 $848 $848 $1,052 $1,052 $1,329 $1,329 $1,745 $2,172 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 5/1.25 7.5/1.88 10/2.5 15/3.75 20/5 NOM. EFF. F.L. AMPS 82.5 8.8-3.8/8.0-3.6 82.5 8.8-3.8/8.0-3.6 84.0 3.8/1.6 85.5 15.0-14.0/6.0-6.2 85.5 15.0-14.0/6.0-6.2 84.0 6.8/2.8 86.5 21.6-19.8/7.6-7.8 87.5 9.6/3.6 86.5 29.0-26.4/10.0-10.0 86.5 12.5/4.5 87.5 18.4/6.1 87.5 25.0/8.0 APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 64 64 58 87 87 79 110 118 143 106 197 320 14.19 14.19 13.22 14.72 14.72 14.72 17.30 17.30 18.55 17.30 22.32 23.49 d,F,13,25 F,13,25 25 d,F,13,25 F,13,25 13,25 F,13 ✯ Stock Model Blue shaded areas are Cast Iron Frames Two-Speed, Two-Winding, Variable Torque, Three Phase Dripproof, Rigid Base Applications: Commercial and industrial fans, blowers, pumps, and other machinery that have variable torque Features: • • • • Ball Bearings 1.15 Service Factor UL Recognized and CSA Certified Plus Economical two-winding, two-speed design HP RPM VOLTS FRAME 1/.25 1/.44 1800/900 1800/1200 1800/1200 1800/900 1800/1200 1800/1200 1800/900 1800/1200 1800/1200 1800/1200 1800/900 1800/1200 1800/1200 1800/1200 1800/900 1800/1200 1800/1200 460 200-230 460 460 200-230 460 460 200-230 200-230 460 460 200-230 200-230 460 460 200-230 460 145T 145T 145T 145T 145T 145T 182T 182T 182T 182T 184T 184T 184T 184T 215T 215T 215T 1.5/.37 1.5/.67 2/.5 2/.88 2/.9 3/.75 3/1.3 5/1.25 5/2.22 DEFINITE PURPOSE characteristics. Prolonged use at low speed can result in significant energy savings. Dripproof motors are intended for use in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). CAT. NO. Y465✯ Y449✯ Y450 Y466✯ Y451✯ Y452✯ Y467✯ Y453✯ Y1453✯ Y409✯ Y468✯ Y454✯ Y1454 ✯ Y412✯ Y469✯ Y455✯ Y415✯ Footnotes: d Will become build-up item when current stock is gone F Class F Insulation 13 F1 Mounting Only, Cannot reassemble to F2 25 Motor will NOT accept C-Face kit SB300 – Prices and Specifications are subject to change without notice. MODEL NO. LIST PRICE MULT. SYMB. 145TTDR5701 145TTDR5703 145TTDR5704 145TTDR5702 145TTDR5705 145TTDR5706 182TTDR7411 182TTDR7413 182TTDW7413 182TTDR7211 184TTDR7230 184TTDR7286 184TTDW7286 184TTDR7215 215TTDW7205 215TTDW7204 215TTDW7203 $730 $730 $730 $801 $801 $801 $883 $883 $883 $883 $919 $919 $919 $919 $1,286 $1,286 $1,286 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 NOM. EFF. F.L. AMPS 79.5 1.5/0.75 80.0 3.4-3.2/2.0-2.0 78.5 1.5/1.0 78.5 2.2/1.1 80.0 5.0-4.8/2.6-2.9 78.5 2.3/1.3 80.0 3.0/1.2 81.0 6.5-6.3/3.5-3.5 81.0 6.5-6.3/3.5-3.5 80.0 3.0/1.7 82.5 4.3/1.8 82.5 9.3-8.5/4.9-4.6 82.5 9.3-8.5/4.9-4.6 82.5 4.6/2.7 86.5 6.8/3.1 85.5 14.5-13.0/7.3-7.0 85.5 6.5/3.5 APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 43 42 39 47 48 44 61 64 64 53 72 79 79 69 118 119 106 12.99 12.99 12.49 13.49 13.49 12.99 13.22 13.72 13.72 12.72 13.72 14.72 14.72 13.72 17.30 17.30 17.30 5,13 5,13 5,13 5,13 5,13 5,13 13,25 d,13,25 13,25 25 25 d,13,25 13,25 25 Continued on next page. 169 Two-Speed, Two-Winding, Variable Torque, Three Phase Dripproof, Rigid Base HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. 7.5/1.9 7.5/3.3 1800/900 1800/1200 1800/1200 1800/900 1800/1200 1800/1200 1800/900 1800/1200 1800/900 1800/1200 460 200-230 460 460 200-230 460 460 460 460 460 254T 254T 254T 256T 256T 256T 284T 284T 286T 286T Y470 Y456✯ Y418✯ Y471 Y457 Y458✯ Y472 Y459✯ Y473 Y460 254TTDX7201 254TTDX7278 254TTDX7208 256TTDX7253 256TTDX7263 256TTDX7264 284TTDP7205 284TTDP7221 286TTDP7251 286TTDP7217 $1,595 $1,595 $1,595 $1,978 $1,978 $1,978 $2,646 $2,646 $3,296 $3,296 S3 S3 S3 S3 S3 S3 S3 S3 S3 S3 10/2.5 10/4.4 15/3.8 15/6.7 20/5 20/8.9 Blue shaded areas are Cast Iron Frames NOM. EFF. F.L. AMPS 85.5 10.5/4.1 87.5 20.8-18.4/11.0-10.2 84.0 10.0/5.6 86.5 12.9/5.6 88.5 28-26/15-14 87.5 12.0/6.5 88.5 18.0/6.5 87.5 18.5/9.5 88.5 25.0/8.5 88.5 25.0/12.0 APPROX. WGHT. LBS. “C” DIM. 135 198 144 145 214 185 300 325 321 340 20.57 22.32 20.57 22.32 22.32 22.32 23.49 23.49 24.99 24.99 FOOT NOTES ✯ Stock Model 50 Hertz, Three Phase Dripproof, Rigid Base Applications: For general purpose use where 50 hertz power is available on compressors, pumps, conveyors, fans, blowers, and other machinery in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). Features: DEFINITE PURPOSE HP 2 3 5 7 1/2 10 15 • • • • • Ball bearings 1.15 Service Factor Nameplated 190-200-208/380-400-416 12 Lead delta capability UL Recognized and CSA Certified RPM VOLTS FRAME CAT. NO. 1500 1500 1500 1500 1500 1500 190-208/380-416 190-208/380-416 190-208/380-416 190-208/380-416 190-208/380-416 190-208/380-416 145T 182T 184T 213T 215T 254T H952 H953 H954 ✯ H955 H956 ✯ H957 MODEL NO. 145TTDR5647 182TTDR8353 184TTDR9040 213TTDW7053 215TTDW7053 254TTDX8338 LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES $426 $474 $603 $792 $942 $1,247 E6 E6 E6 E6 E6 E6 82.5 81.5 82.5 85.5 88.5 88.5 7.2-7.3/3.6-3.65 10.0-9.8/5.0-4.9 16.2-15.6/8.1-7.8 22.6-19.0/9.5-11.3 31.0-29.1/15.5-14.5 46.0-44.0/23.0-22.0 41 60 84 115 135 180 12.99 13.22 14.72 17.30 17.30 22.32 F,YD,5,7 F,YD,25 F,YD,13,25 YD YD F,YD ✯ Stock Model Footnotes: F Class F Insulation YD 12 Leads for WYE-DELTA, Part Winding, or across-the-line starting 5 56H, 143T, and 145T Combination Base with 12 mounting holes 170 7 13 25 Will accept C-Face kit, see Accessory Section F1 Mounting Only, Cannot reassemble to F2 Motor will NOT accept C-Face kit SB300 – Prices and Specifications are subject to change without notice. Automotive Duty, U-Frame Three Phase, Totally Enclosed, Rigid Base Applications: For use in plants that require automotive approved motors. These motors are designed to meet the mechanical and electrical requirements of Daimler Chrysler NPEM-100, Ford EM-1, and General Motors GM 7EQ specifications. HP 3/4 1 1 1/2 2 3 5 7 1/2 10 15 • • • • • • • • • • RPM 1200 1200 1800 1800 1200 1200 3600 1800 1800 1200 3600 1800 1800 1200 1200 3600 1800 1200 1200 3600 1800 1800 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 3600 1800 1800 1200 1200 AQ = Standard efficiency and meets GM 7EQ (see footnote) AH = Premium efficiency and meets GM 7EH and GM 7EQ (see footnote) Cast iron construction Oversized, fully gasketed, cast iron conduit box Oversized ball bearings NEMA Design B Class F insulation 1.0 Service Factor at 65OC ambient, 1.15 Service Factor at 40OC ambient V-Ring shaft seals Five year warranty VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 182U 182U 182U 182U 184U 184U 182U 184U 184U 184U 184U 184U 184U 213U 213U 184U 213U 215U 215U 213U 215U 215U 254U 215U 254U 254U 256U 256U 254U 256U 256U 284U 256U 284U 284U 324U 324U P410 P310 P412 P312 P413 P313 P415 P416 P316 P417 P419 P420 P320 P421 P321 P423 P424 P425 P325 P427 P428 P328 P429 P431✯ P432 P332 P433 P333 P435✯ P436 P336 P437 P439 P440 P340 P441 P341 ----------- $850 $660 $798 $619 $976 $758 $736 $855 $664 $1,077 $811 $901 $698 $1,192 $926 $920 $1,037 $1,477 $1,149 $1,095 $1,375 $1,067 $2,055 $1,330 $1,806 $1,443 $2,628 $2,100 $1,592 $2,194 $1,755 $3,219 $2,029 $3,013 $2,411 $4,334 $3,462 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 82.5 81.5 87.5 86.5 86.5 85.5 85.5 88.5 87.5 87.5 85.5 89.5 88.5 87.5 86.5 87.5 88.5 89.5 88.5 87.5 89.5 88.5 90.2 88.5 91.7 90.2 91.0 89.5 90.2 91.7 90.2 91.0 91.7 92.4 91.0 92.4 91.0 1.3 1.3 1.5 1.5 1.7 1.7 2.0 2.1 2.1 2.2 2.7 2.6 2.6 3.1 3.1 3.8 4.0 4.4 4.4 6.4 6.5 6.5 6.7 9.5 9.6 9.6 9.9 9.9 12.0 12.5 12.5 13.1 17.5 18.0 18.0 19.0 19.5 108 108 108 108 108 108 108 108 108 108 108 119 120 170 170 120 170 170 170 179 170 170 260 170 260 260 332 332 325 260 260 490 260 525 525 610 610 12.21 12.21 12.21 12.21 13.21 13.21 12.21 13.21 13.21 13.21 15.69 15.69 15.69 17.82 17.82 15.69 17.82 19.32 19.32 17.82 19.32 19.32 23.27 19.32 23.44 23.44 25.02 25.02 23.44 25.19 25.19 26.52 25.02 26.52 26.52 29.24 29.24 AH AQ AH AQ AH AQ AH AH AQ AH AH AH AQ AH AQ AH AH AH AQ AH AH AQ AH AH AH AQ AH AQ Blue shaded areas are Cast Iron Frames 182UTTS4026 182UTTS8026 184UTTS4076 184UTTS8076 182UTTS4001 184UTTS4026 184UTTS8026 184UTTS4078 184UTFS4001 184UTFS4026 184UTFS8026 213UTFS4076 213UTFS8076 184UTFS4002 213UTFS4026 215UTFS4076 215UTFS8076 213UTFS4001 215UTFS4026 215UTFS8026 254UTFNA4076 215UTFS4001 254UTFPA4026 254UTFPA8026 256UTFNA4076 256UTFNA8076 254UTFPA4001 256UTFPA4026 256UTFPA8026 284UTFPA4076 256UTFNA4001 284UTFPA4026 284UTFPA8026 324UTFS4076 324UTFS8076 ✯ Stock Model AH,NS,d AH AQ AH AH,NS,d AH AQ AH AQ Continued on next page. Footnotes: d Will become build-up item when current stock is gone AH Conforms to GM 7EH and satisfies Ford EM-1 and GM 7EQ AQ Conforms to GM 7EQ and satisfies Daimler Chrysler NPEM-100, and Ford EM-1 NS Single Shielded Ball Bearings SB300 – Prices and Specifications are subject to change without notice. 171 DEFINITE PURPOSE Features: Automotive Duty, U-Frame Three Phase, Totally Enclosed, Rigid Base HP 20 25 30 40 50 60 DEFINITE PURPOSE 75 100 RPM 3600 1800 1800 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 1200 3600 1800 1800 1200 1200 3600 1800 1800 VOLTS FRAME CAT. NO. 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 286U 286U 286U 326U 324US 324U 324U 364U 364U 326US 326U 326U 365U 365U 364US 364U 364U 404U 404U 365US 365U 365U 405U 405U 405US 405U 405U 444U 444U 444US 444U 444U 445U 445U 445US 445U 445U P444 P445 P344 P446 P450 P451 P348 P453 P349 P457 P458 P352 P460 P353 P464 P465 P356 P467 P357 P471 P472 P360 P474 P361 P478 P479 P364 P481 P365 P485 P486 P368 P488 P369 P492 P493 P372 Blue shaded areas are Cast Iron Frames MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 286UTFPA4001 286UTFPA4026 286UTFPA8026 326UTFS4076 324USTFPA4001 324UTFS4026 324UTFS8026 364UTFS4086 364UTFS8086 326USTFPA4001 326UTFS4026 326UTFS8026 365UTFS4086 365UTFS8086 364USTFS4001 364UTFS4036 364UTFS8036 404UTFS4086 $2,761 $3,700 $2,959 $5,295 $3,541 $4,632 $3,702 $6,393 $5,111 $4,271 $5,412 $4,327 $7,234 $5,785 $5,575 $7,137 $5,706 $9,320 $7,449 $7,036 $8,372 $6,691 $10,765 $8,605 $8,371 $10,394 $8,310 $12,639 $10,103 $11,000 $12,819 $10,250 $14,987 $11,981 $14,536 $15,938 $12,955 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 92.4 93.0 91.0 92.4 93.6 94.1 93.0 93.0 91.7 91.0 94.1 92.4 93.0 91.7 93.6 94.1 93.0 93.6 92.4 94.1 94.5 93.0 94.1 93.6 94.1 95.0 93.6 94.1 93.6 94.1 95.0 92.4 95.0 93.6 95.4 95.4 94.5 23.4 25.0 24.1 25.0 28.1 30.0 30.0 31.0 31.0 35.0 35.5 36.0 37.0 37.0 45.0 46.5 46.5 48.5 48.5 56.0 57.0 57.0 59.0 59.0 65.5 67.5 68.5 71.0 71.0 82.0 85.0 89.5 90.0 88.0 113 113 115 636 636 525 750 520 700 671 1160 1160 748 700 748 1160 1160 939 965 977 1158 1110 1017 1061 1061 1110 1110 1206 1110 1110 1787 1787 1704 1745 1787 1787 1787 1685 2115 1787 28.02 28.02 28.02 30.74 26.97 29.24 29.24 32.00 32.00 28.47 30.74 30.74 33.00 33.00 29.38 32.00 32.00 35.50 35.50 30.38 33.00 33.00 37.00 37.00 34.12 37.00 37.00 41.38 41.38 37.00 41.38 41.38 43.51 43.51 38.94 43.51 43.51 AH,NS AH AQ AH AH,NS AH AQ AH AQ AH,NS AH AQ AH AQ AH,NS AH AQ AH AQ AH,NS AH,V AQ AH AQ AH,V AH,V AQ AH AQ AH AH AQ AH AQ AH AH,V AQ -----365USTFS4001 365UTFS4036 365UTFS8036 405UTFS4086 -----405USTFS4001 405UTFS4036 405UTFS17033 444UTFS4086 444UTFS17077 444USTFS4001 444UTFS4036 -----445UTFN4086 -----445USTFN4001 445UTFN4036 ------ ✯ Stock Model Footnotes: AH Conforms to GM-7EH and satisfies Ford EM-1, and GM-7EQ AQ Conforms to GM-7EQ and satisfies Daimler Chrysler NPEM-100 and Ford EM-1 V Vibration not met NS Single Shielded Ball Bearings 172 SB300 – Prices and Specifications are subject to change without notice. Automotive Duty, U-Frame Three Phase, Totally Enclosed, C-Face Rigid Base Applications: Features: 3/4 1 1 1/2 2 3 5 7 1/2 10 15 20 25 30 40 50 60 75 100 • Premium efficiency conforms to GM 7EH • Satisfies Ford EM-1, Daimler Chrysler • Cast iron construction NPEM-100 and GM 7EQ • Oversized, fully gasketed, cast iron conduit box • Class F insulation • 1.0 Service Factor at 65OC ambient, • Oversized ball bearings 1.15 Service Factor at 40OC ambient • NEMA Design B • V-Ring Shaft Seals • Five year warranty RPM 1200 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 VOLTS FRAME CAT. NO. 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 182UC 182UC 184UC 182UC 184UC 184UC 184UC 184UC 213UC 184UC 213UC 215UC 213UC 215UC 254UC 215UC 254UC 256UC 254UC 256UC 284UC 256UC 284UC 324UC 286UC 286UC 326UC 324UC 324UC 364UC 326USC 326UC 365UC 364USC 364UC 404UC 365USC 365UC 405UC 405USC 405UC 444UC 444USC 444UC 445UC 445USC 445UC P510 P512 P513 P514 P515 P516 P517 P518 P519 P520 P521 P522 P523 P524 P525 P526 P527 P528 P529 P530 P531 P532 P533 P534 P535 P536 P537 P538 P539 P540 P541 P542 P543 P544 P545 P546 P547 P548 P549 P550 P551 P552 P553 P554 P555 P556 P557 Footnotes: NS Single Shielded Ball Bearings SB300 – Prices and Specifications are subject to change without notice. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. ------ $906 $855 $1,032 $793 $912 $1,134 $869 $959 $1,258 $977 $1,103 $1,544 $1,161 $1,441 $2,141 $1,397 $1,893 $2,714 $1,680 $2,281 $3,370 $2,116 $3,165 $4,587 $2,910 $3,853 $5,549 $3,795 $4,884 $6,800 $4,523 $5,664 $7,642 $5,983 $7,543 $9,802 $7,442 $8,778 $11,248 $8,853 $10,878 $13,238 $11,597 $13,418 $15,584 $15,134 $16,533 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 82.5 87.5 86.5 85.5 88.5 87.5 85.5 89.5 87.5 87.5 88.5 89.5 87.5 89.5 90.2 88.5 91.7 91.0 89.5 91.7 91.0 91.7 92.4 92.4 93.6 93.0 92.4 93.6 94.1 93.0 93.6 94.1 93.0 93.6 94.1 93.6 94.1 94.5 94.1 94.1 95.0 94.1 94.1 95.0 95.0 95.4 95.4 1.3 1.5 1.7 2.0 2.1 2.2 2.7 2.6 3.1 3.8 4.0 4.4 6.4 6.5 6.7 9.5 9.6 9.9 12.0 12.5 13.1 17.5 18.0 19.0 22.5 24.1 25.0 28.0 30.0 31.0 34.0 35.5 37.0 45.0 46.5 48.5 56.0 57.0 59.5 65.5 67.5 71.0 82.0 85.0 90.0 113 113 120 120 112 120 108 135 132 180 181 132 181 181 181 181 272 181 272 408 272 260 434 272 675 757 531 531 757 700 600 1169 755 755 1169 917 986 1123 989 1072 1123 1143 1123 1810 1708 1797 1810 1708 1810 12.96 12.96 13.96 12.96 13.96 13.96 16.28 16.28 18.58 16.28 18.58 20.08 18.58 20.08 23.77 20.08 23.89 25.52 25.64 25.64 26.52 25.52 26.52 29.25 28.02 28.02 30.75 29.25 29.25 32.00 30.75 30.75 33.00 32.00 32.00 35.50 33.00 33.00 37.00 37.00 37.00 41.38 41.38 41.38 43.38 43.38 43.38 182UTTS4027 184UTTS4077 -----184UTTS4027 184UTTS4079 -----184UTFS4027 213UTFS4078 184UTFS4004 213UTFS4027 215UTFS4078 213UTFS4002 215UTFS4027 254UTFNA4078 215UTFS4002 254UTFPA4027 256UTFNA4078 -----256UTFPA4027 284UTFPA4078 -----284UTFPA4027 324UTFS4078 286UTFN4002 286UTFPA4027 326UTFS4078 324UTFS4002 324UTFS4027 364UTFS4087 -----------------------------------------------------------------444UTFS4027 ---------------- FOOT NOTES NS NS NS NS DEFINITE PURPOSE HP For use in plants that require automotive approved motors. These motors are designed to meet the mechanical and electrical requirements of Daimler Chrysler NPEM-100, Ford EM-1, and General Motors GM 7EH and GM 7EQ specifications. Blue shaded areas are Cast Iron Frames 173 Automotive Duty, U-Frame Three Phase, Totally Enclosed, C-Face Applications: For use in plants that require automotive approved motors. These motors are designed to meet the mechanical and electrical requirements of Daimler Chrysler NPEM-100, Ford EM-1, and General Motors GM 7EH and GM 7EQ specifications. Features: HP 1 1 1/2 2 3 5 7 1/2 10 DEFINITE PURPOSE 15 20 25 30 40 50 60 75 100 • • • • • • • • • • RPM 1800 1200 1800 1200 1800 1200 1800 1200 1800 1200 1800 1200 1800 1200 1800 1800 1800 1800 1200 1800 1200 1800 1200 1800 1200 1800 1200 1800 Premium efficiency conforms to GM 7EH Satisfies Ford EM-7, Daimler Chrysler NPEM-100 and GM-7EQ Cast iron construction Oversized, fully gasketed, cast iron conduit box Oversized ball bearings NEMA Design B Class F insulation 1.0 Service Factor at 65OC ambient, 1.15 Service Factor at 40OC ambient V-Ring shaft seals Five year warranty VOLTS FRAME CAT. NO. 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 182UC 184UC 184UC 184UC 184UC 213UC 213UC 215UC 215UC 254UC 254UC 256UC 256UC 284UC 284UC 286UC 324UC 326UC 365UC 364UC 405UC 365UC 405UC 405UC 444UC 444UC 445UC 445UC P612 P613 P614 P615 P616 P617 P618 P619 P620 P621 P622 P623 P624 P625 P626 P627 P628 P629 P630 P631 P632 P633 P634 P635 P636 P637 P638 P639 MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 182UTTS4028 184UTTS4080 184UTTS4028 184UTTS4081 184UTFS4028 213UTFS4079 213UTFS4028 215UTFS4079 215UTFS4028 254UTFNA4079 254UTFPA4028 256UTFNA4079 256UTFPA4028 284UTFPA4079 284UTFPA4028 286UTFPA4028 324UTFS4028 326UTFS4028 365UTFS4088 364UTFS4028 $855 $1,032 $912 $1,134 $959 $1,258 $1,103 $1,544 $1,441 $2,141 $1,893 $2,714 $2,281 $3,370 $3,165 $3,853 $4,884 $5,664 $7,642 $7,543 $9,802 $8,778 $11,248 $10,878 $13,238 $13,418 $15,584 $16,533 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 87.5 86.5 88.5 87.5 89.5 87.5 88.5 89.5 89.5 90.2 91.7 91.0 91.7 91.0 92.4 93.0 94.1 94.1 93.0 94.1 93.6 94.5 94.1 95.0 94.1 95.0 95.0 95.4 1.5 1.7 2.1 2.2 2.6 3.1 4.0 4.4 6.5 6.7 9.6 9.9 12.5 13.1 18.0 24.1 30.0 35.5 37.0 47.0 48.5 57.0 59.5 67.5 71.0 85.0 90.0 113 120 120 120 120 132 185 181 181 181 272 272 344 272 531 531 531 755 900 1169 979 1123 1072 1123 1123 1810 1810 1810 1810 12.96 13.96 13.96 13.96 16.22 18.58 18.58 20.08 20.08 25.51 23.94 25.51 25.69 26.50 26.50 28.00 29.25 30.75 33.00 32.00 35.50 33.00 37.00 37.00 41.38 43.38 43.38 43.50 -----365UTFS4028 -----405UTFS4028 -----444UTFS4028 -----445UTFN4028 FOOT NOTES NS NS NS NS Blue shaded areas are Cast Iron Frames Footnotes: NS Single Shielded Ball Bearings 174 SB300 – Prices and Specifications are subject to change without notice. Automotive Duty, T-Frame, GM 7E-TA Three Phase, Totally Enclosed, Rigid Base Applications: For use in plants that require automotive approved motors. These motors are designed to meet the mechanical and electrical requirements of General Motors GM 7E-TA. Features: • • • • • • Conforms to GM 7E-TA Vibration comments on record with GM corporate Meets or exceeds NEMA Premium® efficiencies, except where noted Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC • Provisions to add stub shaft for an encoder (182T-449T, TEFC only) • Internal and external epoxy paint • MAX GUARD® Class F insulation system • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power • Bearing caps (254T and larger) • Precision balanced • Extended grease tubes, regreasable in service • Brass drain and breather • Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 • Meets NEMA MG1 - 1.26.6 Waterproof specification • Hazardous DutyTM Division 2 CSA certification nameplate, for hazardous locations, Class I, Groups A, B, C, and D • Meets temperature code T2B • Actual test and vibration data supplied with each motor • Ball bearings, except where noted • UL Recognized (through 449T), CSA Certified • Five year warranty Available with Nameplate Modification (through 40 HP): • • • • IP56 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. "C" DIM. FOOT NOTES 3/4 1 1200 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 143T 143T 145T 143T 145T 182T 145T 145T 184T 182T 182T 213T 184T 184T 215T 213T 213T 254T 215T 215T 256T 254T 254T 284T R.T.M. R.T.M. R.T.M. R.T.M. R.T.M. W509 R.T.M. R.T.M. W515 W517 ✯ W519 ✯ W521 ✯ W523 ✯ W525 ✯ W527 ✯ W530 ✯ W532 ✯ W534 ✯ W537 ✯ W539 ✯ W541 W544 ✯ W546 ✯ W548 ✯ -------------------------- -------------------------- 182THTS9076 $996 ----------- ----------- 184THTS9076 182THTS9001 182THTS9026 213THFS9076 184THFS9001 184THFS9026 215THFS9076 213THTS9001 213THFS9026 254THFNA9076 215THFS9001 215THFS9026 256THFNA9076 254THFNA9001 254THFNA9026 284THFNA9076 $1,230 $1,114 $999 $1,515 $1,238 $1,158 $1,860 $1,495 $1,419 $2,233 $1,746 $1,709 $2,727 $2,165 $2,033 $3,620 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 80.0 85.5 80.0 86.5 84.0 87.5 85.5 85.5 88.5 87.5 90.2 89.5 89.5 90.2 89.5 91.7 91.7 91.0 91.7 91.7 91.0 91.7 92.4 91.7 1.4 1.5 1.65 2.0 2.2 2.2 2.5 3.0 3.0 3.8 4.0 4.4 5.9 6.2 6.9 8.9 9.6 9.9 11.9 12.5 13.1 17.5 18.8 20.4 53 55 60 58 65 100 68 68 112 105 100 176 142 130 202 200 200 326 218 225 405 345 350 479 10.43 10.43 11.43 10.43 11.43 12.71 11.43 11.43 13.71 12.71 12.71 18.22 16.19 16.19 19.72 17.18 19.73 23.52 19.72 19.72 25.27 23.52 23.52 27.88 N N N,NP N N,NP d,N,75 N N,NP N,75 d,N,75 N,75 75 75 75 75 N,75 75 75 75 75 75 1 1/2 2 3 5 7 1/2 10 15 Blue shaded areas are Cast Iron Frames ✯ Stock Model Footnotes: d Will become build-up item when current stock is gone N Totally Enclosed, Non-Ventilated NP Does not meet NEMA Premium efficiency SB300 – Prices and Specifications are subject to change without notice. R.T.M. Refer to Marathon Electric 75 C FACE KITS A182 A182 A182 A182 A183 A182 A182 A183 A183 A183 A184 A183 A183 A184 A184 A184 A186 Catalog numbers (Cat No.) highlighted in bold blue have efficiency levels that meet or exceed U.S. EPAct and/or NRCan Canadian standards. Addition of C Face Kits may result in non-NEMA “BA” dimension. For the resulting “BA” dimension consult chart found in modification section. Continued on next page. 175 DEFINITE PURPOSE Suitable for use on VFD per guidelines on page 15. Automotive Duty, T-Frame, GM 7E-TA Three Phase, Totally Enclosed, Rigid Base HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. "C" DIM. FOOT NOTES C FACE KITS 20 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1800 1200 3600 1800 1800 1200 3600 1800 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1800 1800 1200 1200 3600 1800 1800 1800 1200 1200 3600 1800 1800 3600 1800 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 256T 256T 286T 284TS 284T 324T 286TS 286T 326T 324TS 324T 364T 326TS 326T 365T 364TS 364T 364TS 404T 365TS 365T 365TS 405TS 405TS 405T 405TS 444T 444TS 444T 445T 445TS 445T 445T 445TS 445T 445TS 447/9T 447/9T 447/9T 447/9TS 445T 447/9T 447/9T 447/9T 447/9T 447/9TS 447/9T 447/9T 447/9TS 447/9T W551 ✯ W553 ✯ W555 W558 ✯ W560 ✯ W562 W565 ✯ W567 ✯ W569 ✯ W571 ✯ W573 ✯ W575 W577 W580 ✯ W582 ✯ W584 ✯ W587 ✯ W586 W589 W591 ✯ W594 ✯ W593 W596 W598 ✯ W600 ✯ W599 W602 W604 W606 W608 W610 W612 ✯ W614 W616 W618 W617 W620 W621 W622 W624 W625 W626 W627 W629 W628 W631 W632 W633 W634 W635 256THFNA9001 256THFNA9026 286THFNA9076 284TSHFNA9001 284THFNA9026 324THFS9076 286TSHFNA9001 286THFNA9026 326THFS9076 324TSHFS9001 324THFS9026 364THFS9086 326TSHFS9001 326THFS9026 365THFS9086 364TSHFS9001 364THFS9036 364TSHFS9026 404THFS9086 365TSHFS9001 365THFS9036 365TSHFS9026 405THFS9086 405TSHFS9001 405THFS9036 405TSHFS9026 $2,683 $2,553 $4,410 $3,305 $3,015 $5,346 $3,860 $3,507 $6,157 $5,090 $4,657 $7,677 $6,584 $5,720 $8,816 $7,969 $7,549 $7,549 $10,330 $10,007 $9,571 $9,571 $12,159 $13,409 $11,824 $11,824 $17,931 $17,530 $15,566 $20,412 $21,058 $18,096 $22,839 $26,639 $22,009 $22,009 $25,310 $27,957 $27,957 $33,596 $27,612 $31,755 $31,755 $32,138 $32,138 $43,547 $32,390 $32,390 $49,938 $41,174 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 92.4 93.0 91.7 93.6 93.6 93.0 93.6 94.1 93.0 93.6 94.1 93.6 93.6 94.5 93.6 94.5 95.0 95.0 94.5 94.5 95.4 95.4 94.5 95.0 95.4 95.4 95.0 95.4 95.4 95.0 95.8 95.8 95.8 95.8 96.2 96.2 96.5 95.8 95.8 96.5 95.8 96.5 96.5 95.8 95.8 96.2 96.5 96.5 96.2 96.2 23.4 24.1 26.8 28.1 31.0 32.5 33.8 36.5 38.5 47.0 47.5 50.0 58.0 60.0 61.5 67.0 69.0 69.0 72.0 84.0 86.0 86.0 90.0 108 113 113 119 136 141 155 165 172 181 223 226 226 225 225 240 274 285 285 285 300 300 330 339 339 382 395 375 425 550 481 478 675 500 525 725 656 700 950 725 775 975 925 1000 1000 1156 1002 1100 1100 1280 1295 1330 1330 1700 1725 1725 2000 2187 2070 2500 2300 2437 2700 2700 2927 2927 2700 2450 2830 2830 3415 3415 2700 3211 3211 3064 3350 25.27 25.27 27.84 24.97 26.44 28.87 26.44 27.84 30.37 27.37 28.87 31.50 28.87 30.37 32.50 29.38 31.50 29.38 35.62 30.38 32.50 30.38 37.12 34.12 37.12 34.12 41.25 37.50 41.25 43.19 39.37 43.19 43.19 39.37 43.19 39.37 51.69 51.84 51.69 47.94 43.19 51.69 51.69 51.69 51.69 47.94 51.84 51.69 47.94 51.84 75 75 A184 A184 A186 A186 A186 A187 A186 A186 A187 A187 A187 A188 A187 A187 A188 A189 A188 A189 A190 A189 A188 A189 A190 A191 A190 A191 25 30 40 50 60 75 100 125 DEFINITE PURPOSE 150 200 250 300 350 Blue shaded areas are Cast Iron Frames -----444TSHFS9001 444THFS9036 445THFN9086 445TSHFN9001 445THFN9036 445THFN9087 445TSHFN9005 445THFN9038 445TSHFN9028 -----449THFS19092 449THFS9088 449TSHFS9003 -----449THFS9028 --------------------449THFS9027 -----449TSHFS9001 449THFS9036 ✯ Stock Model NP NP SL H,RB H,SL RB A193 A192 A192 A195 A194 A194 A195 A194 A195 RB RB SL RB,SL,H SL RB,SL RB SL SL SL,RB SL RB,SL Catalog numbers (Cat No.) highlighted in bold blue have efficiency levels that meet or exceed U.S. EPAct and/or NRCan Canadian standards. Footnotes: H Class H insulation NP Does not meet NEMA Premium efficiency RB Roller Bearing on shaft end for belted load only SL Sound level exceeds standards 176 SB300 – Prices and Specifications are subject to change without notice. Automotive Duty, T-Frame, Ford EM-1 Three Phase, Totally Enclosed, Rigid Base Applications: For use in plants that require automotive approved motors. These motors are designed to meet the mechanical and electrical requirements of Ford EM-1 T-Frame specifications. Features: • Meets or exceeds NEMA Premium® efficiencies, except where noted • Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration • Provisions to add stub shaft for an encoder (182T-449T, TEFC only) • Internal and external epoxy paint • MAX GUARD® Class F insulation system • 1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power • Bearing caps (254T and larger) • Precision balanced • Extended grease tubes, regreasable in service • Brass drain and breather • Meets IEEE45 USCG Marine Duty, IP54 Construction • Meets Ford EM1 Automotive Duty Specification • Hazardous DutyTM Division 2 CSA certification nameplate, for hazardous locations, Class I, Groups A, B, C, and D • Meets temperature code T2B • Actual test and vibration data supplied with each motor • Ball bearings, except where noted • UL Recognized (through 449T) CSA Certified • Three year warranty Available with Nameplate Modification (through 40 HP): • • • • 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger IP54 Suitable for use on VFD per guidelines on page 14. RPM VOLTS FRAME 3/4 1 1200 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 143T 143T 145T 143T 145T 182T 145T 145T 184T 182T 182T 213T 184T 184T 215T 213T 213T 254T 215T 215T 256T 254T 254T 284T 1 1/2 2 3 5 7 1/2 10 15 Blue shaded areas are Cast Iron Frames CAT. NO. E648 E649 E650 E651 E652 E632 E653 E654 E633 E601 E616 E634 E602 E617 E635 E603 E618 E636 E604 E619 E637 E605 E620 E638 ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. 143TTTN6576 143TTTN6526 145TTTN6576 143TTTN6501 145TTTN6526 182TTTS6576 145TTTN6501 145TTTN6527 184TTTS6576 182TTTS6501 182TTTS6526 213TTFS6576 184TTFS6501 184TTFS6526 215TTFS6576 213TTTS6501 213TTFS6526 254TTFNA6576 215TTFS6501 215TTFS6526 256TTFNA6576 254TTFNA6501 254TTFNA6526 284TTFNA6576 $561 $458 $576 $573 $497 $737 $601 $546 $911 $825 $740 $1,122 $917 $858 $1,378 $1,108 $1,051 $1,786 $1,293 $1,266 $2,182 $1,732 $1,626 $2,896 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 80.0 85.5 80.0 86.5 84.0 87.5 85.5 85.5 88.5 87.5 90.2 89.5 89.5 90.2 89.5 91.7 91.7 91.0 91.7 91.7 91.0 91.7 92.4 91.7 1.4 1.5 1.65 2.0 2.2 2.2 2.5 3.0 3.0 3.8 4.0 4.4 5.9 6.2 6.9 8.9 9.6 9.9 11.8 12.5 13.1 17.5 18.8 20.4 53 55 60 58 65 100 68 68 112 98 102 176 142 130 202 200 200 326 218 225 405 345 350 479 ✯ Stock Model FOOTNOTES: N Totally Enclosed, Non-ventilated NP Does not meet NEMA Premium efficiency 75 Addition of C Face Kits may result in non-NEMA “BA” dimension. For the resulting “BA” dimension consult chart found in modification section. 76 Addition of C Face Kits in non-NEMA “AH” dimension. “AH” is 2.12, “Rework “AH” is 2.38. SB300 – Prices and Specifications are subject to change without notice. "C" DIM. FOOT NOTES C FACE KITS 10.43 N,75,76 A603 10.43 N,75,76 A603 11.43 N,NP,75,76 A655 10.43 N,75,76 A603 11.43 N,NP,75,76 A655 12.71 N,75,76 A644 11.43 N,75,76 A655 11.43 N,NP,75,76 A655 13.71 N,75 A644 12.71 N,75 A644 12.71 N,75 A644 18.22 75 A206 16.19 75 A644 16.19 75 A644 19.72 75 A206 17.19 N,75 A206 19.72 75 A206 23.52 75 A284 19.72 75 A206 19.72 75 A206 25.27 75 A284 23.52 75 A284 23.52 75 A284 26.34 75 A618 Catalog numbers (Cat No.) highlighted in bold blue have efficiency levels that meet or exceed U.S. EPAct and/or NRCan Canadian standards. Continued on next page. 177 DEFINITE PURPOSE HP Automotive Duty, T-Frame, Ford EM-1 Three Phase, Totally Enclosed, Rigid Base HP RPM VOLTS FRAME CAT. NO. 20 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1800 1200 3600 1800 1800 1200 3600 1800 1800 1200 3600 1800 1800 1800 1200 3600 1800 1800 1200 3600 1800 1800 1200 3600 1800 1800 1800 1200 1200 3600 1800 1800 1800 1200 3600 1800 3600 1800 1800 1800 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 256T 256T 286T 284TS 284T 324T 286TS 286T 326T 324TS 324T 364T 326TS 326T 326TS 365T 364TS 364T 364TS 404T 365TS 365T 365TS 405T 405TS 405T 405TS 444T 444T 444TS 444T 444TS 445T 445TS 445T 445TS 445T 445TS 445T 445TS 447/9T 447/9T 447/9T 447/9TS 445T 447/9T 447/9T 447/9T 447/9TS 447/9T 447/9TS 447/9T L447/9T L447/9T E606 E621 E639 E607 E622 E640 E608 E623 E641 E609 E624 E642 E610 E625 E453 E643 E611 E626 E454 E644 E612 E627 E455 E645 E613 E628 E456 E327 E646 E614 E629 E457 E647 E615 E630 E458 E448 E449 E631 E459 E854 E773 E687 E699 E450 E771 E690 E774 E698 E691 E769 E692 E776 E777 25 30 40 50 60 75 100 125 DEFINITE PURPOSE 150 200 250 300 350 400 450 Blue shaded areas are Cast Iron Frames ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. "C" DIM. FOOT NOTES C FACE KITS 256TTFNA6501 256TTFNA6526 286TTFNA6576 284TSTFNA6501 284TTFNA6526 324TTFS6576 286TSTFNA6501 286TTFNA6526 326TTFS6576 324TSTFS6501 324TTFS6526 364TTFS6586 326TSTFS6501 326TTFS6526 326TSTFS6536 365TTFS6586 364TSTFS6501 364TTFS6536 364TSTFS6526 404TTFS6586 365TSTFS6501 365TTFS6536 365TSTFS6526 405TTFS6586 405TSTFS6501 405TTFS6536 405TSTFS6526 444TTFN16577 444TTFS6586 444TSTFS6501 444TTFS6536 444TSTFS6526 445TTFN6586 445TSTFN6501 445TTFN6536 445TSTFN6526 445TTFN6587 445TSTFN6505 445TTFN6538 445TSTFN6528 449TTFS6540 449TTFS6578 449TTFS6588 449TSTFS6503 445TTFN6540 449TTFS6528 449TTFS6538 449TTFS6577 449TSTFS6502 449TTFS6537 449TSTFS6501 449TTFS6536 449TTFS16553 $2,146 $2,026 $3,528 $2,644 $2,413 $4,276 $3,087 $2,805 $4,926 $4,072 $3,726 $6,675 $5,268 $4,576 $4,576 $7,666 $6,929 $6,565 $6,565 $8,982 $8,702 $8,322 $8,322 $10,574 $11,660 $10,282 $10,282 $14,451 $14,451 $15,243 $13,535 $13,535 $17,750 $18,311 $15,736 $15,736 $19,859 $23,164 $19,138 $19,138 $22,009 $24,311 $24,311 $29,214 $24,011 $27,612 $27,612 $27,946 $37,866 $30,652 $43,424 $35,804 $36,759 $37,584 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 92.4 93.0 91.7 93.6 93.6 93.0 93.6 94.1 93.0 93.6 94.1 93.6 93.6 94.5 94.5 93.6 94.5 95.0 95.0 94.5 94.5 95.4 95.4 94.5 95.0 95.4 95.4 95.0 94.5 95.4 95.4 95.4 95.0 95.8 95.8 95.8 95.8 95.8 96.2 96.2 96.5 95.8 95.8 96.5 95.8 96.5 96.5 95.8 96.2 96.5 96.2 96.2 96.2 96.5 23.4 24.1 26.8 28.1 31.0 32.5 34.1 36.5 38.5 47.0 47.5 50.0 58.0 60.0 60.0 61.5 67.0 69.0 69.0 72.0 84.0 86.0 86.0 90.0 108 113 113 124 119 136 141 141 155 165 172 172 180 222 226 226 225 240 240 274 285 285 285 300 330 339 382 395 448 515 375 425 550 481 478 675 500 525 725 656 700 950 725 775 775 955 954 980 980 1156 1002 1100 1100 1280 1295 1330 1330 1970 1690 1725 1725 1725 2000 2187 2070 2070 2500 2300 2437 2437 2700 2927 2927 2700 2450 2830 2830 3415 2700 3211 3064 3350 3800 3800 25.27 25.27 27.84 24.97 26.34 28.87 26.47 27.84 30.37 27.37 30.37 31.50 28.87 31.87 28.87 32.50 29.38 31.50 29.38 35.62 30.38 32.50 30.38 37.12 34.12 37.12 34.12 41.25 41.25 37.50 41.25 37.50 43.26 39.44 43.26 39.44 43.26 39.44 43.26 39.44 51.69 51.69 51.69 47.88 43.26 51.69 51.69 51.69 47.88 51.69 47.88 51.69 56.71 56.71 75 75 A284 A284 A618 A618 A618 A214 A618 A618 A214 A214 A214 A395 A214 A214 A214 A395 A396 A395 A396 A223 A396 A395 A396 A223 A226 A223 A226 A620 A229 A232 A229 A232 A620 A621 A620 A621 N/A A621 N/A A621 N/A A623 N/A A624 N/A A623 N/A A623 A626 N/A A624 N/A N/A N/A ------ NP NP d H,RB H RB H H,RB H H,RB H A,H,RB H H,RB H H H,RB H H,RB H,79 H,79 ✯ Stock Model Footnotes: A NEMA Design A d Will become build-up item when current stock is gone H Class H insulation NP Does not meet NEMA Premium efficiency 178 MODEL NO. RB 79 Roller bearing on shaft end for belted loads only Ball brgs on both ends suitable for direct connection. For belted applications, refer to marketing SB300 – Prices and Specifications are subject to change without notice. Blue Chip® Crusher (Aggregate Duty) Totally Enclosed, Rigid Base, NEMA Design C Applications: Specifically designed for the aggregate industry crusher applications such as cone, jaw, and roller type impactors, pulverizers, etc. Features: • • • • • • • • • • • Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration NEMA Design C 4140 Shaft Material Roller Bearing on Drive End for belted loads 1.15 Service Factor 80º C rise at rated load Class F insulation Inpro® Smart Ring, rotating shaft seals on each end of shaft Internal and external epoxy paint Brass drain and breather Actual test and vibration data supplied with each motor HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS 100 125 150 200 250 1800 460 405T Y822✯ 405TTFS8857 $7,408 E4 93.6 117 1800 460 444T Y824 444TTFS8841 $10,057 E4 94.5 142 1800 460 445T Y826✯ 445TTFS8870 $11,026 E4 94.1 174 1200 460 449T Y855 449TTFS8576 $16,465 E4 94.5 245 1200 460 449T Y857 449TTFS8581 $21,974 E4 95.4 304 APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1318 37.12 d 1695 41.25 YD 1990 43.25 d 3098 51.69 YD 3242 51.69 YD ✯ Stock Model DEFINITE PURPOSE Blue shaded areas are Cast Iron Frames IP55 Footnotes: d Will become build-up item when current stock is gone YD 12 Leads for Wye Delta, part winding, or across the line starting SB300 – Prices and Specifications are subject to change without notice. 179 Air Compressor, Single Phase Dripproof, Rigid Base Applications: For use in compressors, pumps, pressure washers, and other applications requiring high starting and breakdown torques and used in relatively clean and dry environments. For additional ratings suitable for air compressor applications see the General Purpose Single Phase or General Purpose Three Phase sections. Features: • Capacitor start and capacitor start/capacitor run designs for reduced amperage and high starting and breakdown torque • Heavy gauge steel frame and base • Ball bearings • Continuous duty at nameplated horsepower, not "special" or "compressor" duty • Manual reset thermal protectors, as noted • UL Recognized and CSA Certified APPROX. WGHT. LBS. HP RPM VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS 1/2 3600 1800 3600 1800 3600 1800 3600 1800 3600 1800 3600 1800 3600 3600 1800 1800 1800 3600 3600 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 230 230 230 230 208-230 208-230 208-230 208-230 208-230 208-230 208-230 56 56 56 56 56 56 56 56H 56H 145T 56H 184T 184T 56H 184T 184T 184T 184T 213T 215T 215T MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL NONE NONE MANUAL MANUAL NONE NONE NONE NONE NONE NONE D014 G912✯ D015 K016 D010✯ G936✯ D018✯ G951✯ D012✯ I127✯ D013✯ Z502✯ Z504 D017✯ I119✯ I114✯ Z506 I108✯ I105✯ I115✯ I116✯ 56C34D2107 56C17D2013 56C34D2094 56B17D56 56B34D2029 56C17D5305 56B34D133 56C17D5308 56B34D5318 145TBDR5337 56B34D5332 184TBDR5326 184TBDR5301 56B34D5302 184TBDR7375 184TBDR7026 184TBDR7656 184TBDR7001 213TCDW7001 215TBDW7026 215TBDW7028 $201 $266 $233 $324 $267 $353 $345 $414 $432 $497 $563 $520 $730 $599 $829 $488 $625 $720 $974 $961 $1,237 F1 F1 F1 F1 F1 F1 F1 F1 F1 S1 F1 S1 S1 F1 S1 S1 S1 S1 S1 S1 S1 8.4/3.8-4.2 8.6/4.1-4.3 9.8/4.8-4.9 11.0/5.5 10.6/5.5-5.3 13.4/6.8-6.7 14.8/8.0-7.4 18.0/9.3-9.0 19.2/10.5-9.6 18.8/10.2-9.4 14.0 12.6 20.0 20.0 25.0-24.1 23.0-21.0 23.6-21.5 34.3-31.0 40.0-37.0 37.2-34.5 49.0-44.0 3/4 1 1 1/2 2 3 5 DEFINITE PURPOSE 7 1/2 10 18 23 19 25 23 29 26 40 35 50 34 55 62 55 83 102 85 110 102 118 140 “C” DIM. FOOT NOTES 10.72 11.72 10.97 11.47 11.72 11.44 11.72 12.44 11.53 13.49 11.44 14.27 14.77 13.94 16.22 15.70 15.22 16.69 16.55 18.05 19.3 2 2 2 1 1 2,7 1 2,5,7 1,5,7 1,7 1,5 1 1 1,5 1 1 1,CF 1,CF 2 1 1 ✯ Stock Model Footnotes: CF Consult Factory for Accessory Kit and/or Modification Selection 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 5 56H, 143T, and 145T Combination Base with 12 mounting holes 7 Will accept C-Face kit, see Accessory Section 180 Continued on next page. SB300 – Prices and Specifications are subject to change without notice. Grain Stirring, Single Phase Totally Enclosed Fan Cooled, Rigid Base Applications: Definite purpose for grain stirring systems inside grain bins. Features: HP RPM 1 1/2 1800 • • • • • • • 1.15 Service Factor Fully gasketed construction to keep grain dust out 7/8" diameter shaft Fan/Fan guard on shaft end keeps grain dust out of motor Durable powder coat paint Manual reset thermal protector Ball bearings VOLTS 115/208-230 FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 56HZ X902 56B17F5324 $425 F1 15.2/8.2-7.6 46 13.21 1,5 Agriculture Fan, Single Phase, Belt Drive Totally Enclosed, Air Over, Rigid Base Applications: Designed for demanding agricultural belt drive fan applications such as poultry house fans and barn exhaust fans. Catalog X912 is Totally Enclosed Air Over and must be mounted within the airstream for proper cooling. • • • • • Capacitor start/capacitor run design for higher efficiency Ball bearings Continuous duty Automatic reset thermal protector Fully gasketed HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/2 1 1725 1725 115/230 115/230 56 56 X913 ✯ X912 ✯ 56B17T20 56B17T5303 $284 $371 F1 F1 4.6/2.3 9.2/4.6 20 32 10.47 11.44 1 1 ✯ Stock Model Agriculture Fan, Single Phase, PSC Variable Speed Totally Enclosed-Air Over, Resilient Base-Thru Bolt Applications: Designed for demanding agricultural fan applications such as poultry houses and barn exhaust fans. Must be mounted within the airstream for proper cooling. Variable speed capabilities when used with a single phase speed control unit--NOT supplied by Marathon Electric. Super Variable speed motors, catalog X030, X031, and X032, are designed for lower temperature rise throughout a greater speed range. Features: • Ball bearings • Extended thru-bolts • Fully gasketed HP RPM VOLTS 1/4 1625 1625 1075 1625 1625 1075 1625 1625 1075 115/230 115/230 115/230 115/230 115/230 115/230 115/230 115/230 115/230 1/3 1/2 FRAME 48YZ 48YZ 48YZ 48YZ 48YZ 48YZ 48YZ 48YZ 48YZ • • • • Continuous duty Automatic reset thermal protector 1/2" dia. x 2-1/2" long shaft with two flats, 90º apart 48Y & 48YZ have 48/56 Fr. mounting holes CAT. NO. X030 X024 X027 X031 X025 X028 X032 X026 X029 ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 48A17T118 48A17T2002 48A11T2021 48A17T237 48A17T2003 48A11T2022 48A17T119 48A17T2004 48A11T2023 $203 $166 $180 $224 $184 $195 $247 $200 $209 F1 F1 F1 F1 F1 F1 F1 F1 F1 3.6/1.8 3.2/1.6 3.2/1.6 3.8/1.9 4.4/2.2 4.2/2.1 5.4/2.7 6.0/3.0 6.4/3.2 20 19 14 23 17 15 23 21 19 11.06 10.09 10.09 11.81 10.09 10.84 11.81 10.84 10.84 FOOT NOTES ✯ Stock Model Footnotes: 1 Capacitor Start/Capacitor Run design for reduced amperage 5 56H, 143T, and 145T Combination Base with 12 mounting holes SB300 – Prices and Specifications are subject to change without notice. 181 DEFINITE PURPOSE Features: Agriculture Fan, Single Phase Totally Enclosed, Direct Drive-Thru Bolt Applications: Designed for demanding, direct drive agricultural fan applications such as poultry house fans and barn exhaust fans. Features: • • • • Economical split phase, single speed design Continuous duty 1/2" Extended thru-bolts 1/2" diameter x 1.5" long shaft with flat • Ball bearings • Manual reset thermal protector • Fully gasketed HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/4 1725 115 48Y X909 ✯ 48S17T2004 $145 F1 4.0 10 7.62 3 ✯ Stock Model Agriculture Fan, Single Phase, Single Speed Totally Enclosed-Air Over, Resilient Base-Thru Bolt Applications: Designed for demanding agricultural fan applications such as poultry house fans and barn exhaust fans. Must be mounted within the airstream for proper cooling. Features: • • • • • • • • • Economical split phase, single speed design Ball bearings Continuous duty Automatic reset thermal protector Extended thru-bolts on X903 and X904 Fully gasketed 48Z Frame has 1/2" dia. x 2-1/2" long shaft with two flats 56Z Frame has 1/2" dia. x 1-7/8" long with 1-5/8” flat 48Y & 48YZ have 48/56 Fr. mounting holes DEFINITE PURPOSE HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/4 1/3 1/2 3/4 1 1 1/2 1725 1725 1725 1725 1725 1725 115 115 115/230 115/230 115/230 115/208-230 48YZ 48YZ 56Z 56 56 56H X903✯ X904✯ X900✯ X905 X906 X908 48S17T2001 48S17T2000 56S17T2002 56C17T5301 56C17T5302 56B17T5302 $147 $166 $225 $291 $341 $401 F1 F1 F1 F1 F1 F1 3.5 4.5 6.6/3.3 11.0/5.5 13.4/6.7 13.6/7.5-6.8 18 21 24 28 30 43 11.34 11.34 10.72 11.35 11.85 12.85 3,53 3,53 3,53 2 2 1,5 ✯ Stock Model Agriculture Fan, Single Phase, Two Speed Totally Enclosed-Air Over, Direct Drive-Thru Bolt Applications: Designed for demanding, direct drive agricultural fan applications such as poultry house fans and barn exhaust fans where two speeds are desired. Must be mounted within the airstream for proper cooling. Features: • • • • • • • Economical split phase, two-speed design Ball bearings Continuous duty Automatic reset thermal protector Extended thru-bolts Fully gasketed 1/2" dia. x 2-1/2" long shaft with two flats,90 degrees apart HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/4 1/3 1725/1140 1725/1140 115 115 48YZ 48YZ X910✯ X911 ✯ 48S17T366 48S17T365 $188 $236 F1 F1 4.1/2.5 5.3/2.9 17 18 11.09 11.34 3 3 Footnotes: 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 182 ✯ Stock Model 3 5 53 Split Phase design 56H, 143T, and 145T Combination Base with 12 mounting holes Includes 5/8” dia. shaft adapter sleeve with key SB300 – Prices and Specifications are subject to change without notice. Crop Dryer, Single Phase Dripproof/Air Over, Rigid Base Applications: Crop dryers with air over/fan on shaft designs. Features: HP • • • • • • • • • • RPM 3-4.5 3-5 5-7.5 7-10 7.5-10 7.5-10.5 7-9 10-15 3600 3600 3600 3600 3600 3600 3600 3600 3600 Double sealed ball bearings Continuous duty Class F insulation system Thermostats for thermal overload protection (auto reset protector on Z304) 34" long leads for ease of installation Keyed shafts with 1/4"-20 UNC tapped hole in end Frame mounted capacitors on catalog Z304, Z305, Z306, Z309, Z313, Z314, and Z315 Capacitors included, shipped loose on catalog Z307 and Z308 Extra nameplate included, loose, for remote mounting See dimensions section for typical outline drawing VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS 230 230 230 230 230 230 230 230 230 145TZ 182TZ 184TZ 184TZ 184TZ 215TZ 184TZ 215TZ 215TZ AUTO TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT Z304✯ Z309 Z305✯ Z307✯ Z313 Z314 Z306✯ Z315 Z308✯ 145TBDR5309 182TCDR7013 184TCDR7615 184TBDR7009 184TBDR7324 215TCDW7012 184TCDR7617 215TBDW7013 215TCDW7003 $568 $683 $832 $1,047 $1,047 $1,224 $939 $1,409 $1,409 S1 S1 S1 S1 S1 S1 S1 S1 S1 13.0-19.0 15.8-25.3 27.0-36.3 28.0-42.0 30.0-42.0 37.0-49.5 36.0-45.0 39.5-61.5 46.0-71.0 APPROX. WGHT. LBS. 44 67 73 95 89 139 85 159 135 “C” DIM. FOOT NOTES 13.74 15.00 14.50 16.00 16.43 19.16 15.50 20.42 18.16 1 2 2 1 1 2 2 1 2 Crop Dryer, Three Phase Dripproof/Air Over, Rigid Base Applications: Crop dryers with air over/fan on shaft designs where three phase power is available. Features: HP 3-3.9 5-7 7-10 10-15 • • • • • • Ball bearings Thermostats for thermal overload protection 34" long leads exit elbow connector in bracket Keyed shafts with 1/4"-20 UNC tapped hole in end Extra nameplate included, loose, for remote mounting See dimension section for typical outline drawing • Continuous duty • Class F insulation RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 3600 3600 3600 3600 208-220/440 208-220/440 208-220/440 208-220/440 182TZ 184TZ 184TZ 215TZ Y301 Y302✯ Y303✯ Y304✯ -----184TTDR7611 184TTDR7612 215TTDW7301 $655 $697 $739 $975 E6 E6 E6 E6 8.6-8.4/4.2 17-17/8.5 28.0-27.0/13.5 28-26.1/13.1 70 67 73 95 13.71 13.71 14.22 17.41 ✯ Stock Model Footnotes: 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design SB300 – Prices and Specifications are subject to change without notice. 183 DEFINITE PURPOSE ✯ Stock Model Farm Duty/Agriculture, High Torque Single Phase, Totally Enclosed Fan Cooled, Rigid Base Applications: Feeders, conveyors, fans, compressors, spray washers, grinders, elevators, pumps, and other demanding agricultural applications that require high starting torques. Features: • • • • • • • • Ball bearings 1.15 Service Factor Manual reset thermal protector Low temperature manual reset thermal protector Totally enclosed and fully gasketed construction for dirty environments Condensate drains Shaft slinger UL Recognized and CSA Certified HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/3 1/2 3/4 1 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 115/230 230 230 230 56 56 56 143T 56 145T 56H 145T 182T 184T 184T 215T F101 ✯ F102 ✯ F103 ✯ Z123 ✯ F104 ✯ Z118 ✯ F105 ✯ Z128 ✯ Z119 ✯ Z120 ✯ Z121 ✯ Z122 ✯ 56C17F5324 56C17F5325 56C17F5326 143TCFR5328 56C17F5327 145TBFR5328 56B17F5307 145TBFR5341 182TCFR7072 184TCFR7061 184TBFR7737 215TBFW7029 $266 $304 $363 $420 $395 $495 $486 $550 $599 $746 $908 $1,347 F1 F1 F1 S1 F1 S1 F1 S1 S1 S1 S1 S1 6.6/3.1-3.3 8.8/4.2-4.4 11.0/5.4-5.5 13.4/6.8-6.7 13.4/6.8-6.7 15.2/8.2-7.6 15.2/8.2-7.6 18.8/9.4 26.8/13.4 17.0 20.2 30.0 24 25 29 33 32 42 41 50 64 92 99 138 11.82 11.82 12.32 12.87 12.82 13.87 13.82 14.87 15.53 18.03 18.06 21.48 2 2 2 2 2 1 1,5 1 2 2 1 1 1 1/2 2 3 5 7 1/2 ✯ Stock Model Farm Duty/Agriculture, High Torque Single Phase, Totally Enclosed Fan Cooled, C-Face, Rigid Base DEFINITE PURPOSE Applications: Feeders, conveyors, fans, compressors, spray washers, grinders, elevators, pumps, and other demanding agricultural applications that require high starting torques. Features: • Ball bearings • 1.15 Service Factor • Manual reset thermal protector • Low temperature manual reset thermal protector • Totally enclosed and fully gasketed construction for dirty environments • Condensate drains • Shaft slinger • UL Recognized and CSA Certified • Made in the U.S.A. HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/3 1/2 3/4 1 1 1/2 2 3 5 1800 1800 1800 1800 1800 1800 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 230 230 56C 56C 56C 56C 56HC 56HC 184TC 184TC F131✯ F132✯ F133✯ F134✯ F135✯ K319✯ I314 ✯ I315 ✯ 56C17F5358 56C17F5912 56C17F5913 56C17F5914 56B17F5584 56B17F5319 184TBFR7041 184TBFR7034 $325 $363 $422 $454 $545 $559 $838 $1,000 F1 F1 F1 F1 F1 F1 S1 S1 6.6/3.1-3.3 8.8/4.2-4.4 11/5.4-5.5 13.4/6.8-6.7 15.2/8.2-7.6 18.8/9.4 13.7 21.0 24 25 29 35 41 53 104 98 11.82 11.82 12.32 12.82 13.82 14.82 17.61 18.72 2 2 2 2 1,5 1,5 1 1 ✯ Stock Model Footnotes: 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 5 56H, 143T, and 145T Combination Base with 12 mounting holes 184 SB300 – Prices and Specifications are subject to change without notice. Farm Duty/Agriculture, Extra-High Torque Chore Motor® Single Phase, Totally Enclosed Fan Cooled, Rigid Base Applications: Silo unloaders, barn cleaners, bunk feeders, conveyors, and other machinery requiring extra-high starting torque in demanding farm duty environments. Features: • • • • • • • Class F insulation • Condensate drains 1.15 Service Factor • Shaft slinger 300% and greater starting torque for hard-to-start applications Totally enclosed and fully gasketed for dirty environments 213TZ/215TZ models have 1-1/8" shaft, 182TZ model has 7/8" shaft See dimension section for typical outline drawing Manual reset thermal protector HP RPM VOLTS FRAME BRGS. CAT. NO. MODEL NO. 2 3 5 1800 1800 1800 1800 1800 1800 115/230 230 208-230 230 230 230 182TZ 184T 184T 213TZ 215TZ 215T BALL BALL BALL BALL BALL BALL Z112 ✯ Z113 ✯ Z114 ✯ Z117 ✯ Z115 ✯ Z116 ✯ 182TCFR9061 184TCFR9057 184TBFR7070 213TBFW7027 215TBFW7028 215TBFW7044 7 1/2 10 LIST PRICE $634 $789 $962 $1,070 $1,428 $1,778 MULT. SYMB. F.L. AMPS S1 S1 S1 S1 S1 S1 25.6/12.8 18.0 24.0-22.5 23.0 32.0 40.0 APPROX. WGHT. LBS. 63 83 97 119 142 148 “C” DIM. FOOT NOTES 15.31 16.81 17.36 18.73 21.48 21.48 CF,2 CF,2 1 1 1 1,17 ✯ Stock Model Auger Drive, Single Phase Totally Enclosed Fan Cooled, 56N Flange Mount Applications: Replacement motors for poultry feed auger drive systems bolt to existing gearbox for Features: • • • • • • • • NEMA 56N, two bolt flange mounting Fully gasketed, side mount conduit box Extended fan-end shaft with flats for manual jogging auger drive Mechanical start switch protected from overspeeded auger drive Catalog Nos. F201, F202, & F203 have 1/2" dia. X 1 1/2" long shaft with flat Catalog Nos. F204 & F205 have 5/8" dia. x 2" long shaft with key See dimension section for typical outline drawing Manual reset thermal protector HP RPM VOLTS FRAME BRGS. 1/3 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 115/230 115/230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 115/208-230 115/230 48N 48NZ 48N 48NZ 56NZ 48NZ 56NZ 56NZ 56NZ 56NZ BALL BALL BALL BALL BALL BALL BALL BALL BALL BALL 1/2 3/4 1 1 1/2 CAT. NO. F201 ✯ F1201 ✯ F202 ✯ F1202 ✯ F203 ✯ F1203 ✯ F204 ✯ F1204 ✯ F205 ✯ F1205 ✯ MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 48C17F2000 48C17F11005 48C17F2001 48C17F11006 56C17F5356 48C17F11007 56C17F5357 56C17F15537 56B17F5331 56B17F15516 $286 $286 $314 $314 $371 $371 $416 $416 $501 $501 F1 F1 F1 F1 F1 F1 F1 F1 F1 F1 5.0/2.5 6.2/3.1 6.8/3.7-3.4 8.0/3.8-4.0 11.0/5.4-5.5 10.8/5.3-5.4 13.4/6.8-6.7 13.4/6.7 15.2/8.2-7.6 15.2/7.6 13 21 25 22 34 24 34 31 44 40 11.31 10.31 11.81 10.56 12.58 11.31 13.38 13.38 14.38 14.38 2 E,2 2 E,2 2 E,2 2 E,2 1 E,1 ✯ Stock Model Footnotes: CF Consult Factory for Accessory Kit and/or Modification Selection E Design incorporates electronic switch 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 17 1.0 Service Factor SB300 – Prices and Specifications are subject to change without notice. 185 DEFINITE PURPOSE easy installation. Commercial Laundry Dryer Single Phase, Dripproof, Resilient Base Applications: Commercial laundry dryer motors. Features: • • • • • • Replaces Huebsch commercial laundry dryer motors Automatic reset thermal protection Special threaded shaft extension X602 has 3/4" shaft adapter included Ball bearings 48YZ have 48/56 Fr. mounting holes HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/4 1/3 1/2 3/4 1725 1725 1725 1725 100-120/200-240 115/208-230 115/208-230 115/208-230 48YZ 56Z 56Z 56Z X600 X601 ✯ X602 ✯ X603 ✯ 48C17D2057 56C17D2101 56C17D2102 56C17D5346 $222 $263 $324 $408 F1 F1 F1 F1 5.4-6.6/2.7-3.3 5.8/2.8-2.9 8.0/4.0-4.0 12.0/5.8-6.0 18 19 23 25 12.02 14.41 15.41 15.10 16,68 16 16 16 ✯ Stock Model Commercial Laundry Dryer Three Phase, Dripproof, Resilient Base or Rigid Base Applications: Commercial laundry dryer motors. Features: • • • • • Replaces Huebsch commercial laundry dryer motors Automatic reset thermal protection Special threaded shaft extension on X605 Ball bearings 48YZ have 48/56 Fr. mounting holes DEFINITE PURPOSE HP RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 1/4 1/3 1/2 3/4 1725 1725 1725 1725 1140 200-240/460-480 230/460 230/460 230/460 208-203/460 48YZ 56 56Z 56Z 56 X605 ✯ X606 X607 X608 X609 48T17D2002 56T17D3318 56T17D3320 56T17D3319 56T11D5317 $249 $289 $347 $421 $539 F1 F1 F1 F1 F1 1.3-1.8/0.8-0.9 1.6/0.8 1.7/0.85 2.4/1.2 3.1-3.1/1.55 17 22 28 29 29 12.02 10.35 15.10 15.60 11.44 d,12,68 68 68 68 12 ✯ Stock Model Commercial Laundry Dryer Three Phase, Dripproof, C-Face Applications: Commercial laundry dryer motors. Features: HP 1/4 • • • • Replaces Huebsch commercial laundry dryer motors Automatic reset thermal protection Special threaded shaft extension Ball bearings RPM VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 3450 200-240/460-480 56CZ X610 ✯ 56T34D5375 $230 F1 1.4-1.8/0.8-0.9 21 11.80 d,68 ✯ Stock Model Footnotes: d Will become build-up item when current stock is gone 1 Capacitor Start/Capacitor Run design for reduced amperage 5 56H, 143T, and 145T Combination Base with 12 mounting holes 12 With rigid base 16 Fixed CCW Rotation, viewing opposite shaft (or lead end) of motor 68 Nameplated 60/50 Hertz 186 SB300 – Prices and Specifications are subject to change without notice. Kiln Duty, Premium Efficiency Blue Chip Severe Duty Totally Enclosed Air Over Three Phase, Rigid Base Applications: Fans found in kilns and other high ambient environments where long life and high efficiency are desired. These TEAO motors must be mounted within the airstream for proper cooling. Suitable for use on variable frequency drives. Features: 1 2 3 5 7 1/2 10 Blue Chip quality, 100% cast iron construction for rigidity and reduced vibration Internal and external epoxy paint CR200 Corona resistant magnet wire Class H insulation system Normally closed thermostats • Heat stabilized ball bearings and high temperature grease • Suitable for inverter use for 20:1 Variable Torque with 1.0 S.F. • Suitable for 90OC ambient at 1.15 S.F. or 100OC ambient at 1.0 S.F. • Extended grease tubes, regreasable in service • 8 Foot Leads • UL Recognized and CSA Certified RPM 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 VOLTS FRAME CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 143T 143T 145T 145T 182T 182T 145T 145T 184T 184T 213T 213T 182T 182T 213T 213T 215T 215T 184T 184T 215T 215T 254T 254T 213T 213T 254T 254T 256T 256T 215T 215T 256T 256T 284T 284T S500 S550 S501 S551 S502 S552 S503 S553 S504✯ S554 S505 S555 S506 S556 S507 S557 S508 S558 S509 S559 S510✯ S560✯ S511 S561 S512 S562 S513✯ S563 S514 S564 S515 S565 S516✯ S566✯ S517 S567✯ --------145TTTN18577 ------------145TTTN18531 145TTTN18532 184TTTS18577 184TTTS18578 --------182TTTS18532 ----213TTTS17077 213TTTS17078 ----215TTTS18064 --------215TTTS17077 215TTTS17078 ----------------254TTTNA17077 --------256TTTNA18601 --------256TTTNA18578 256TTTNA18577 284TTTNA18601 284TTTNA17101 $1,129 $1,129 $1,218 $1,218 $1,699 $1,699 $1,218 $1,218 $1,684 $1,684 $1,788 $1,788 $1,646 $1,646 $1,788 $1,788 $2,059 $2,059 $1,684 $1,684 $2,059 $2,059 $2,211 $2,211 $1,982 $1,982 $3,025 $3,025 $2,828 $2,828 $2,059 $2,059 $2,895 $2,895 $3,001 $3,001 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 85.5 85.5 80.0 80.0 74.0 74.0 85.5 85.5 87.5 87.5 84.0 84.0 90.2 89.5 89.5 89.8 86.5 86.5 90.2 90.2 87.5 88.5 88.5 88.5 91.7 91.7 90.2 90.2 88.5 88.5 91.7 91.7 91.0 91.0 88.5 88.5 1.5 1.2 1.7 1.4 2.2 1.8 2.8 2.3 3.0 2.4 3.8 3.0 3.9 3.2 4.3 3.5 5.0 4.0 6.5 5.0 6.9 5.5 7.5 6.0 9.6 7.7 9.8 7.9 11.0 8.6 12.5 10.0 12.8 10.2 15.2 12.2 65 65 59 59 100 100 68 68 115 115 170 170 110 110 175 175 200 200 130 130 200 200 375 375 200 200 375 375 425 425 225 225 425 425 475 475 10.43 10.43 11.43 11.43 12.71 12.71 11.43 11.43 13.71 13.71 15.69 15.69 13.71 13.71 15.69 15.69 17.18 17.18 13.71 13.71 17.19 17.19 20.60 20.60 15.69 15.69 20.60 20.60 22.35 22.35 17.19 17.19 22.35 22.35 23.44 23.44 Blue shaded areas are Cast Iron Frames FOOT NOTES d DEFINITE PURPOSE HP • • • • d ✯ Stock Model Footnotes: d Will become build-up item when current stock is gone SB300 – Prices and Specifications are subject to change without notice. Continued on next page. 187 Kiln Duty, Premium Efficiency Blue Chip Severe Duty Totally Enclosed Air Over Three Phase, Rigid Base HP 15 20 25 30 RPM 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 900 900 1800 1800 1200 1200 VOLTS FRAME 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 254T 254T 284T 284T 286T 286T 256T 256T 286T 286T 324T 324T 284T 284T 324T 324T 326T 326T 286T 286T 326T 326T Blue shaded areas are Cast Iron Frames MODEL NO. LIST PRICE MULT. SYMB. NOM. EFF. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 254TTTNA18530 ----284TTTNA16577 284TTTNA18577 ----------------286TTTNA18577 ----324TTTS18601 ------------324TTTS18577 --------------------326TTTS18577 ----- $2,382 $2,382 $3,467 $3,467 $3,797 $3,797 $2,762 $2,762 $3,797 $3,797 $4,640 $4,640 $3,001 $3,001 $4,770 $4,770 $5,051 $5,051 $3,797 $3,797 $5,051 $5,051 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 E9 92.4 92.4 91.7 91.7 90.2 90.2 93.0 93.0 91.7 91.7 90.2 90.2 93.6 93.6 92.4 92.4 90.2 90.2 94.1 94.1 93.0 93.0 18.2 14.4 20.5 16.4 22.0 17.6 24.1 19.3 27.0 21.4 29.5 23.5 31.0 24.8 33.0 26.5 37.0 29.5 36.5 29.2 38.0 31.5 425 425 475 475 550 550 450 450 550 550 685 685 500 500 675 675 750 750 525 525 725 725 20.60 20.60 23.44 23.44 24.94 24.94 22.35 22.35 24.94 24.94 26.00 26.00 23.44 23.44 26.00 26.00 27.50 27.50 24.94 24.94 27.50 27.50 CAT. NO. S518 S568 S519 S569 S520 S570 S521 S571 S522 S572 S523 S573 S524 S574 S525 S575 S526 S576 S527 S577 S528 S578 FOOT NOTES A A A A ✯ Stock Model DEFINITE PURPOSE Footnotes: A NEMA Design A 188 SB300 – Prices and Specifications are subject to change without notice. Oil Well Pumpers, Three Phase Dripproof, Rigid Base Applications: For use on walking beam pumps found in oil field service. Features: HP RPM 3 5 7 1/2 10 15 20 25 30 40 50 60 75 100 125 150 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 • NEMA design D for extra high starting and breakdown torques • Thermostats for thermal overload protection • Fully guarded with screens on all external openings • Shaft slinger • Low starting current with 5-8% slip • Class F insulation • F2 conduit box location • Copper bar rotor on 500 frame • Special "oil well" duty • 1.15 Service Factor VOLTS FRAME BEARINGS OVER LOAD 230/460/796 215T 230/460/796 215T 230/460/796 254T 230/460/796 256T 230/460/796 284T 230/460/796 286T 460/796 324T 460/796 326T 460/796 365T 460/796 404T 460/796 405T 460/796 444T 460/796 445T 460/796 505U 460/796 505U BALL BALL BALL BALL BALL BALL BALL BALL BALL BALL BALL BALL BALL ROLLER ROLLER TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT TSTAT CAT. NO. Y201 Y202✯ Y203 Y204✯ Y215✯ Y216✯ Y217✯ Y218✯ Y209 Y210✯ Y211✯ Y212✯ Y213 Y219 Y220 MODEL NO. 215TTDW7376 215TTDW7377 254TTDX7377 256TTDX7391 284TTDP7692 286TTDP7689 324TTDP7687 326TTDP7697 365TTDS7383 404TTDS7387 405TTDS7697 444TTDS8699 445TTDS9477 505UTDS1584 505UTDS1590 $1,205 $1,392 $1,791 $2,209 $2,672 $3,251 $3,991 $4,770 $6,263 $7,567 $8,926 $10,020 $13,361 $19,574 $20,917 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 82.5 84.0 85.5 86.5 87.5 87.5 88.5 88.5 87.5 87.5 87.5 90.2 88.5 90.2 91.0 F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 10.6/5.3/3.1 16.6/8.3/4.8 22.0/11.0/6.4 29.0/14.5/8.4 41.0/20.5/11.9 53.0/26.5/15.3 34.0/19.7 40.0/23.1 48.0/27.7 60.0/34.5 71.0/41.0 91.5/53.0 124/71.5 175/101 175/101 80 118 220 225 332 375 490 548 713 939 1018 1226 1327 2054 2282 17.30 17.30 21.29 23.04 23.44 24.94 26.00 27.50 29.93 32.81 34.31 38.06 40.06 45.19 45.19 FOOT NOTES d d Blue shaded areas are Cast Iron Frames DEFINITE PURPOSE ✯ Stock Model LIST MULT. NOM. PRICE SYMB. EFF. Footnotes: d Will become build-up item when current stock is gone SB300 – Prices and Specifications are subject to change without notice. 189 Pressure Washer, Single Phase Dripproof, Rigid Base Applications: Portable or stationary high pressure washers and steam cleaners, compressors, and other reciprocating pumps and applications where high starting torque and low running amps are required and motors are installed in a relatively clean, dry environment. Features: • • • • • • Ball bearings Heavy gauge steel frame and base Capacitor start/capacitor run design for low amps and high efficiency Continuous duty, 1.15 Service Factor Manual reset thermal protectors on some models UL Recognized and CSA Certified HP RPM VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS 3/4 3600 1800 3600 1800 3600 1800 3600 1800 1800 3600 1800 1800 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 208-230 208-230 208-230 208-230 208-230 56 56 56 56 56 56H 56H 145T 56H 56H 184T 184T 184T 184T MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL NONE MANUAL MANUAL NONE D015 K016 D010✯ G936✯ G987 G958✯ G976 I127✯ G979 G996 I128✯ I130 I119✯ I131✯ 56C34D2094 56B17D56 56B34D2029 56C17D5305 56B34D2021 56B17D5323 56B34D5304 145TBDR5337 56B17D5319 56B34D5334 184TBDR7631 184TBDR7630 184TBDR7375 184TBDR7632 $233 $324 $267 $268 $363 $429 $449 $497 $566 $576 $580 $629 $829 $837 F1 F1 F1 F1 F1 F1 F1 S1 F1 F1 S1 S1 S1 S1 9.8/4.8-4.9 11.0/5.5-5.5 10.6/5.5-5.3 13.4/6.8-6.7 14.8/8.0-7.4 13.2/7.2-6.6 17.6/9.7-8.8 18.8/10.2-9.4 18.8/10.2-9.4 14.2-12.5 15.4-13.7 15.4-13.7 25.0-24.1 25.0-24.1 1 1 1/2 2 3 5 APPROX. WGHT. LBS. 19 25 23 29 27 39 34 50 50 43 82 82 82 80 “C” DIM. FOOT NOTES 10.97 11.47 11.72 11.44 11.72 11.94 11.44 13.49 13.44 12.44 15.22 15.22 16.22 16.22 2 1 1 2,7 1 1,5,7 1,5,7 1,7 1,5,7 1,5,7 1 1 1 1 ✯ Stock Model DEFINITE PURPOSE Pressure Washer, Single Phase Dripproof, C-Face with Rigid Base Applications: Portable or stationary high pressure washers and steam cleaners, compressors, and other reciprocating pumps and applications where high starting torque and low running amps are required and motors are installed in a relatively clean, dry environment. NEMA C-Face mounting provisions for direct-coupled applications. Features: • • • • • • Ball bearings, mechanically locked on shaft end Heavy gauge steel frame and base Capacitor start/capacitor run design for low amps and high efficiency Continuous duty, 1.15 Service Factor Manual reset thermal protector UL Recognized and CSA Certified HP RPM VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. 1 1/2 3600 1800 3600 1800 3600 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 208-230 208-230 208-230 56C 56HC 56HC 56HC 56HC 184TC 184TC MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL K212 G290 G294 K232✯ K219 I305 I308 56B34D2018 56B17D5328 56B34D5307 56B17D5322 56B34D5336 184TBDR7628 184TBDR7634 $380 $445 $464 $554 $591 $689 $949 F1 F1 F1 F1 F1 S1 S1 14.8/8.0-7.4 13.2/7.2-6.6 16.8/9.4-8.4 18.8/10.2-9.4 14.2-12.5 15.4-13.7 25.0-24.1 28 44 36 50 42 87 97 11.72 11.94 11.44 13.43 12.44 15.96 16.96 2 3 5 FOOT NOTES 5 5 5 5 ✯ Stock Model Footnotes: 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 190 5 7 56H, 143T, and 145T Combination Base with 12 mounting holes Will accept C-Face kit, see Accessory Section SB300 – Prices and Specifications are subject to change without notice. Pressure Washer, Single Phase Totally Enclosed Fan Cooled, Rigid Base Applications: Portable or stationary high pressure washers and steam cleaners, compressors, and other reciprocating pumps and applications where high starting torque and low running amps are required and motors are installed in a dirty or dusty environment. Features: • • • • • • Ball bearings Heavy gauge steel frame and base Capacitor start/capacitor run design for low amps and high efficiency Continuous duty, 1.15 Service Factor Manual reset thermal protector UL Recognized and CSA Certified HP RPM VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS APPROX. WGHT. LBS. “C” DIM. FOOT NOTES 3/4 3600 1800 3600 1800 3600 1800 3600 1800 1800 3600 1800 1800 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 115/230 115/230 230 230 230 56 56 56 56 56 56H 56H 56H 145T 56H 184T 184T MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL G379✯ G356✯ G390✯ G373✯ K332 G378✯ K335 K316 I702✯ K338 I704 I706 56C34F5309 56C17F5308 56C34F5311 56C17F5311 56B34F5303 56B17F5302 $259 $357 $293 $374 $397 $429 $434 $530 $550 $603 $778 $961 F1 F1 F1 F1 F1 F1 F1 F1 S1 F1 S1 S1 10.6/5.3-5.3 11.0/5.4-5.5 12.4/6.7-6.2 13.4/6.8-6.7 12.1/6.9-6.1 15.2/8.2-7.6 17.5/8.7 18.8/9.4 18.8/9.4 11.8 13.7 21.0 28 29 31 32 37 41 40 52 52 51 88 95 12.32 12.32 12.32 12.82 13.32 13.82 13.32 14.82 14.87 14.82 16.86 17.86 2,7 2,7 2,7 2,7 1,7 1,5,7 1,5,7 1,5,7 d,1,7 1,5,7 1 1 1 1 1/2 2 3 5 ----------145TBFR5336 ---------------- ✯ Stock Model Pressure Washer, Single Phase Totally Enclosed Fan Cooled, C-Face with Rigid Base DEFINITE PURPOSE Applications: Portable or stationary high pressure washers and steam cleaners, compressors, and other reciprocating pumps and applications where high starting torque and low running amps are required and motors are installed in a dirty or dusty environment. NEMA C-Face mounting provisions for direct-coupled applications. Features: HP RPM 1/2 3/4 1 1 1/2 1800 1800 1800 3600 1800 3600 1800 1800 3600 1800 1800 2 3 5 • • • • • • Ball bearings, mechanically locked on shaft end Heavy gauge steel frame and base Capacitor start/capacitor run design for low amps and high efficiency Continuous duty, 1.15 Service Factor, except where noted Manual reset thermal protector UL Recognized and CSA Certified VOLTS 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 115/230 115/230 230 230 230 FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS 56C 56C 56C 56C 56HC 56HC 145TC 56HC 56HC 184TC 184TC MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL G380 G381✯ G382✯ K612✯ G396✯ K615✯ I311 K319✯ K618✯ I314✯ I315✯ 56C17F5957 56C17F5955 56C17F5956 56B34F5306 56B17F5310 56B34F5312 145TBFR5333 56B17F5319 56B34F5318 184TBFR7041 184TBFR7034 $330 $395 $413 $412 $471 $489 $666 $559 $617 $838 $1,000 F1 F1 F1 F1 F1 F1 S1 F1 F1 S1 S1 8.8/4.2-4.4 11/5.4-5.5 13.4/6.8-6.7 12.1/6.9-6.0 13.6/7.5-6.8 17.5/8.7 18.8/9.4 18.8/9.4 11.8 13.7 21.0 APPROX. WGHT. LBS. 27 33 35 40 45 42 52 53 52 104 98 “C” DIM. FOOT NOTES 11.82 12.32 12.82 13.32 13.82 13.32 14.87 14.82 14.82 17.61 18.72 2 2 2 1 1,5 1,5 1 1,5 1,5 1 1,17 ✯ Stock Model Footnotes: d Will become build-up item when current stock is gone 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 5 56H, 143T, and 145T Combination Base with 12 mounting holes 7 Will accept C-Face kit, see Accessory Section 17 1.0 Service Factor SB300 – Prices and Specifications are subject to change without notice. 191 Woodworking/Power Tool, Single Phase Totally Enclosed, Rigid Base Applications: Replacement motors for table saws, planers, lathes, and other equipment found in the woodworking and metalworking trades.These totally enclosed, fan cooled motors are well suited for use in dusty and dirty environments or where wood or metal shavings are present. Features: • • • • • • • Capacitor start design for high starting torque with low amps Double sealed ball bearings Heavy gauge steel frame and base 1.15 Service Factor Manual reset thermal protector Dependable, dust-proof centrifugal starting switch On/off toggle switch and 8 foot cord with 115 volt plug included on 1/2 to 1-1/2 HP models • UL Recognized and CSA Certified HP RPM VOLTS FRAME OVER LOAD CAT. NO. MODEL NO. LIST PRICE MULT. SYMB. F.L. AMPS 1/2 3/4 1800 3600 1800 3600 1800 3600 1800 3600 1800 3600 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/208-230 115/230 115/230 208-230 56 56 56 56 56 56 56 56H 56H 145T MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL T010 T013✯ T014✯ T015✯ T016✯ T017✯ T018 T019✯ T030✯ T031✯ 56C17F5351 56C34F5340 56C17F5350 56C34F5339 56C17F5349 56B34F5332 56B17F5328 56B34F5333 56B17F5329 145TBFR5309 $341 $309 $399 $343 $422 $421 $513 $459 $566 $636 F1 F1 F1 F1 F1 F1 F1 F1 F1 S1 8.8/4.2-4.4 10.6/5.3-5.3 11.0/5.4-5.5 12.4/6.7-6.2 13.4/6.8-6.7 14.2/7.7-7.1 13.6/7.5-6.8 17.5/8.7 18.8/9.4 13.1/11.8 1 1 1/2 2 3 APPROX. WGHT. LBS. 29 43 30 31 31 35 45 37 50 51 “C” DIM. FOOT NOTES 11.82 12.32 12.32 12.32 12.82 12.82 13.73 13.41 14.82 14.87 2 2 d,2 2 d,2 1 1 1,5 1,5,d 1 ✯ Stock Model DEFINITE PURPOSE Footnotes: d Will become build-up item when current stock is gone 1 Capacitor Start/Capacitor Run design for reduced amperage 2 Capacitor Start Induction Run design 5 56H, 143T, and 145T Combination Base with 12 mounting holes 192 SB300 – Prices and Specifications are subject to change without notice.
